VIN / Build Split
2025 refresh - verify APIM part number for screen service as hardware may differ from 2021-2024.
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
DFW Mobile Service
DFW Serving Dallas / Fort Worth
2025 Ford F-150 Supported Services
2025 Ford F-150
ADAS calibration, module programming, and security relearns
XL, XLT, Lariat, King Ranch, Platinum, Limited, Raptor, Raptor R. 12" SYNC 4 screen standard on all trims. 5G available.
Technical snapshot
- Platform P702
- CAN Architecture HS-CAN (500kbps), MS-CAN (125kbps), LIN buses (seat/mirror/lighting nodes), Automotive Ethernet 100BASE-T1 (SYNC 4B trims - IPMA-GWM video feed)
- Security SecuriLock PATS Gen 5 - 128-bit AES encryption (FDRS only, no generic tool support)
OVERVIEW
Expert ADAS calibration, module programming, and diagnostic recovery for the 2025 Ford F-150. On this vehicle we cover documented systems include Lane Keep Assist / Lane Departure Warning (LKA/LDW), Blind Spot Information System (BLIS), and Cross Traffic Alert (CTA), this P702 platform vehicle, PATS / Smart Key immobilizer support, Ford SYNC 4 with 5G infotainment programming. Mobile across the DFW Metroplex; mail-in module work is temporarily unavailable.
Platform
P702
Production
2004-present
Trim Levels
XL, XLT, Lariat, King Ranch, Platinum, Limited, Raptor, Raptor R. 12" SYNC 4 screen standard on all trims. 5G available.
Drivetrain
RWD / AWD / 4WD
Engine
-
CAN Speed
HS-CAN (500kbps), MS-CAN (125kbps), LIN buses (seat/mirror/lighting nodes), Automotive Ethernet 100BASE-T1 (SYNC 4B trims - IPMA-GWM video feed)
YEAR-SPECIFIC NOTES
Infotainment
Ford SYNC 4 with 5G
Wireless Support
CarPlay: Yes / Android Auto: Yes
Screen Upgrade
Yes. 12" screen now standard across all 2025 F-150 trims. No upgrade needed.
Wireless Upgrade Path
Yes. ota_update. Wireless Android Auto and Apple CarPlay standard on all trims.
Exact-year service summary for 2025 Ford F-150
ADAS coverage
This 2025 Ford F-150 page documents 9 ADAS systems, including Lane Keep Assist / Lane Departure Warning (LKA/LDW), Blind Spot Information System (BLIS), Cross Traffic Alert (CTA), and Adaptive Cruise Control / Pre-Collision Assist (Forward Radar).
View ADAS dataCalibration triggers
Documented calibration triggers include Windshield Replacement, Front Bumper Repair or Replacement, Rear Bumper or Tail Lamp Repair, and Any Collision. Use the ADAS tab for the full trigger list.
View triggersProgrammable modules
This page indexes 31 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and IPC coverage.
View modulesGateway and security
This page includes 3 gateway, immobilizer, or key-security records for this 2025 Ford F-150.
View securityCore Auto Logic capability
Core Auto Logic supports exact-year diagnostics, ADAS calibration, module programming, and security-access planning for the 2025 Ford F-150 using the documented systems and module data on this page.
Choose a sectionWhat changes on this exact year
Feature availability
Ford Co-Pilot360 Active 2.0 / BlueCruise (Lariat and above, subscription require - Available; Immobilizer: PATS / Smart Key - Standard; Platform: P702 - Confirmed
Driver-assist suite
Ford Co-Pilot360 Active 2.0 / BlueCruise (Lariat and above, subscription required)
VIN and build split
2025 refresh - verify APIM part number for screen service as hardware may differ from 2021-2024.
Infotainment context
Ford SYNC 4 with 5G; SYNC 4B - 12-inch standard (XL/XLT/Lariat base) / 13.2-inch portrait on Lariat 502A+, King Ranch, Platinum, Limited, Raptor
Connectivity notes
Wireless CarPlay: Yes; Wireless Android Auto: Yes; Wireless upgrade: Yes; Upgrade method: ota_update
Network and access
CAN: HS-CAN (500kbps), MS-CAN (125kbps), LIN buses (seat/mirror/lighting nodes), Automotive Ethernet 100BASE-T1 (SYNC 4B trims - IPMA-GWM video feed)
Tool access for this exact year
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
Factory scan, coding, and calibration access
Ford IDS / Ford FDRS
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
OEM subscription required
Make-level OEM tool map plus exact-year gateway and ADAS fields.
Ford-family configuration and service functions
FORScan
Useful for supported configuration and diagnostics; factory programming still moves to OEM software when required.
FORScan Ford, Mazda, Lincoln, and Mercury support documentation.
ADAS scan, setup, and verification
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Tool subscription required
Service-level scanner-vendor source packet plus exact-year ADAS records.
Bench cloning and chip-level recovery
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Bench programmer source packet plus exact-year module/security records.
Choose a section to view data
SUPPORTED SYSTEMS
What we service on this vehicle
Documented module coverage for the 2025 Ford F-150. Counts reflect modules our techs have programmed or calibrated on this exact platform.
ADAS Calibration
9 modules documented
Forward camera, radar, surround-view and lane-keep recalibration after windshield, suspension or fascia work.
Open ADAS tabEngine / ECU Programming
4 modules documented
Powertrain reprogramming, calibration updates, replacement ECU configuration and security access.
Open Modules tabBCM / Body Programming
4 modules documented
Body control module, gateway and accessory programming. Includes feature-bit reconfiguration.
Open Modules tabTCU / Transmission
2 modules documented
Transmission control module reprogramming, adaptive learning reset and replacement TCM clone.
Open Modules tabSRS / Airbag Reset
14 modules documented
Crash-data clear, hard-code reset and replacement airbag module configuration.
Open Modules tabABS / Brake Module
1 module documented
ABS / EBCM bleed support, replacement module coding and yaw-rate sensor calibration.
Open Modules tabKey Security & Immobilizer
1 module documented
Immobilizer modules, key/fob types, add-key + all-keys-lost (AKL) capability and security overview.
Open Security tabIPC, SAS & Other Modules
2 modules documented
Instrument cluster cloning, steering angle sensor calibration and other supporting modules.
Open Modules tabConnectivity & Accessories
4 modules documented
Infotainment radio, surround view, remote start, trailer brake controller and other equipped systems.
Open Modules tabRecalibration Triggers
11 modules documented
Service events that require ADAS recalibration on this vehicle. Tap to see what triggers what.
Open ADAS tabNeed something not listed? Most undocumented modules can still be programmed.
Get a QuoteFeature availability 3
Ford Co-Pilot360 Active 2.0 / BlueCruise (Lariat and above, subscription require
AvailableCalibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.
Immobilizer: PATS / Smart Key
StandardKey programming requires manufacturer-level tool access. Add key supported. All keys lost (AKL) supported.
Platform: P702
ConfirmedVerify platform code matches when cross-referencing part numbers across model years.
WHAT WE RESOLVE
Common issues on this vehicle
Common Ford F-150 issues we resolve on this platform: Lane Keep Assist / Lane Departure Warning (LKA/LDW), Blind Spot Information System (BLIS), Cross Traffic Alert (CTA), and Adaptive Cruise Control / Pre-Collision Assist (Forward Radar) recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - P702 platform uses HS-CAN (500kbps), MS-CAN (125kbps), LIN buses (seat/mirror/lighting nodes), Automotive Ethernet 100BASE-T1 (SYNC 4B trims - IPMA-GWM video feed). Key programming and immobilizer faults - PATS / Smart Key immobilizer; all-keys-lost supported.
ADAS CALIBRATION MATRIX
ADAS systems on this vehicle
Ford Co-Pilot360 Active 2.0 / BlueCruise (Lariat and above, subscription required)
Scroll for part numbers and Details
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Lane Keep Assist / Lane Departure Warning (LKA/LDW) | Forward Camera | Camera | None | YES | NL3T-14G647 | |
| Blind Spot Information System (BLIS) | Side Radar | Radar | Static + Dynamic | YES | NL3T-14C689-X (L), NL3T-14C690-X (R) | |
| Cross Traffic Alert (CTA) | Side Radar | Radar | None | YES | NL3T-14C689-X (L), NL3T-14C690-X (R) | |
| Adaptive Cruise Control / Pre-Collision Assist (Forward Radar) | Front Radar | Radar | Static | YES | NL3T-9G768 | |
| BlueCruise (Hands-Free Highway) | Fused (Radar + Camera) | Fused | Static + Dynamic | YES | NL3T- IPMA | |
| Automatic Emergency Braking (AEB) | Fused (Radar + Camera) | Fused | Static | YES | NL3T- CCM | |
| 360-Degree Camera System | Forward Camera | Camera | Static | YES | NL3T- IPMA | |
| Rear View Camera | Rear Camera | Camera | Static | YES | NL3T-19G490 | |
| Active Park Assist 2.0 | Ultrasonic | Ultrasonic | Static | YES | BUMPER-MOUNTED SENSORS (6 FRONT, 6 REAR) |
ADAS SYSTEM
YES Supported
Identification
- System type
- Module category
- Sensor location
Part Numbers
- OEM
- Alternative
Calibration & Triggers
- Calibration type
- Programming approach
- Requires PMI
- Trigger events
Technical Notes
- Chip / MCU
- Service notes
Need this calibrated?
Get a quote for ADAS calibration WHEN IS CALIBRATION REQUIRED?
Triggers for ADAS recalibration
Windshield Replacement Affected: IPMA, Lane Departure Warning, Lane Keep Assist, AEB, BlueCruise (if equipped), 360 Camera
CRITICAL: 2025 F-150 requires 2025-specific IPMA calibration procedures (updated WSM). Do NOT use 2021-2024 target placement charts - front fascia redesign altered camera geometry. Ford-approved glass only. Dynamic FDRS road drive after static calibration (>25 mph, visible lane markings). DTC C1028 common after improper reinstall.
Front Bumper Repair or Replacement Affected: CCM (Forward Radar), ACC, Pre-Collision Assist, AEB, BlueCruise, Front Park Aid Sensors
2025 front bumper beam geometry changed from 2021-2024. Radar bracket position revised - verify aim spec against 2025 WSM (not prior years). Static CCM alignment via FDRS. Inspect bracket for deformation before calibration. Vehicle at curb weight.
Rear Bumper or Tail Lamp Repair Affected: BLIS SODL/SODR, Cross Traffic Alert, Rear Park Aid Sensors
SODL/SODR PMI required via FDRS if tail lamps disconnected or replaced. BLIS fault will disable BlueCruise - verify BLIS operation before BlueCruise diagnostics. Rear park aid static calibration if bumper cover removed.
Any Collision Affected: RCM, IPMA, CCM, SODL/SODR, all deployed airbags and sensors
Full ADAS scan mandatory. SRS crash data in RCM - reset or replace before delivery. All ADAS modules must be verified. NL3T- module replacements required - do not install ML3T- carryover units. Check OTA status after all module work is complete.
Lift or Level Kit Installation Affected: CCM (Forward Radar), IPMA (if windshield angle affected)
Radar static alignment required after any suspension height change. Vehicle must be at final ride height before calibration. BlueCruise may be disabled if radar aim is out of spec - verify after calibration.
Mirror Replacement Affected: 360 Camera side views, DDM/PDM BLIS LED
360 camera side alignment required if camera-equipped mirrors replaced (FDRS). BLIS mirror LEDs controlled by DDM/PDM - confirm LED function after reinstall. PMI if mirror module replaced.
OTA Update Failure / Partial OTA Affected: Any module receiving OTA update (PCM, SYNC, IPMA, GWM, CCM)
A partial or interrupted OTA can leave a module in an inoperable state. Check FordPass/FDRS for OTA status before starting any programming session. Complete pending OTAs before FDRS work, or disable vehicle network access (WiFi/cellular) before starting.
Any Module Replacement Affected: All programmed modules
FDRS PMI required - VIN coding and VBP (Vehicle Build Profile) write. GWM cascade updates may affect IPMA, PSCM, CCM, CMR. Save AS-BUILT before removal. NL3T- parts only - no cross-generation substitution.
Forward Camera Replacement
Camera module replacement requires full recalibration using FDRS/IDS.
Forward Radar Replacement
Radar module replacement requires alignment/calibration using FDRS/IDS.
BSM Sensor Replacement
Blind spot monitoring sensor replacement requires calibration using FDRS/IDS.
SRS MODULES
SRS Modules
Restraint Control Module (RCM) x5
PML3B78611D11AB Under center console
- PART
- PML3B78611D11AB
- LOCATION
- Under center console
- MFG
- Autoliv
- NOTES
- Requires FDRS or J2534 for RCM configuration. As-built data recommended for programming. DTC B1231 common post-crash. Module must be configured to VIN.
FL3B15043B13AG Under center console
- PART
- FL3B15043B13AG
- LOCATION
- Under center console
- MFG
- Autoliv
- NOTES
- Requires FDRS or J2534 for RCM configuration. As-built data recommended for programming. DTC B1231 common post-crash. Module must be configured to VIN.
FL3B78611D10AB Under center console
- PART
- FL3B78611D10AB
- LOCATION
- Under center console
- MFG
- Autoliv
- NOTES
- Requires FDRS or J2534 for RCM configuration. As-built data recommended for programming. DTC B1231 common post-crash. Module must be configured to VIN.
ML3B18042D95AF Under center console
- PART
- ML3B18042D95AF
- LOCATION
- Under center console
- MFG
- Autoliv
- NOTES
- Requires FDRS or J2534 for RCM configuration. As-built data recommended for programming. DTC B1231 common post-crash. Module must be configured to VIN.
ML3B18042D94AF Under center console
- PART
- ML3B18042D94AF
- LOCATION
- Under center console
- MFG
- Autoliv
- NOTES
- Requires FDRS or J2534 for RCM configuration. As-built data recommended for programming. DTC B1231 common post-crash. Module must be configured to VIN.
SRS Control Unit (variant) x9
FL3Z14B321A
- PART
- FL3Z14B321A
- CHIP/MCU
- 93C76
FL3Z14B321B
- PART
- FL3Z14B321B
- CHIP/MCU
- 93C76
FL3Z14B321C
- PART
- FL3Z14B321C
- CHIP/MCU
- 93C76
JL3Z14B321A
- PART
- JL3Z14B321A
- CHIP/MCU
- 93C76
JL3Z14B321B
- PART
- JL3Z14B321B
- CHIP/MCU
- 93C76
JL3Z14B321C
- PART
- JL3Z14B321C
- CHIP/MCU
- 93C76
ML3Z14B321A
- PART
- ML3Z14B321A
- CHIP/MCU
- 93C76
ML3Z14B321B
- PART
- ML3Z14B321B
- CHIP/MCU
- 93C76
NL3Z14B321A
- PART
- NL3Z14B321A
- CHIP/MCU
- 93C76
ECU MODULES
ECU Modules
PCM - 2.7L EcoBoost V6 TT (Gen 3, ~325 hp) NL3T-12A650
- PART
- NL3T-12A650
- PROTOCOL
- OBD Programming Port
- CODING
- Yes
- CLONE
- Yes
- CHIP/MCU
- Bosch MED17 / Continental SIM
- NOTES
- FDRS Programming Port. Battery SOC >=80% before programming. VBP (Vehicle Build Profile) write mandatory post-replacement. Check OTA status before FDRS session.
PCM - 3.5L EcoBoost V6 TT (~400 hp standard / PowerBoost hybrid) NL3T-12A650
- PART
- NL3T-12A650
- PROTOCOL
- OBD Programming Port
- CODING
- Yes
- CLONE
- Yes
- CHIP/MCU
- Bosch MED17 / Continental SIM
- NOTES
- PowerBoost variant: dual PCM + BECM. Non-PowerBoost and PowerBoost PCMs not interchangeable. FDRS handles both in sequence for hybrid reprogramming.
PCM - 5.0L Coyote V8 Ti-VCT (~400 hp) NL3T-12A650
- PART
- NL3T-12A650
- PROTOCOL
- OBD Programming Port
- CODING
- Yes
- CLONE
- Yes
- CHIP/MCU
- Bosch MED17
- NOTES
- Ti-VCT calibration required post-programming. FDRS Programming Port.
PCM - 3.3L Ti-VCT V6 (base, ~290 hp) NL3T-12A650
- PART
- NL3T-12A650
- PROTOCOL
- OBD Programming Port
- CODING
- Yes
- CLONE
- Yes
- CHIP/MCU
- Bosch MED17
- NOTES
- Base engine. Same FDRS flow as 5.0L.
BCM MODULES
BCM Modules
Body Control Module (BCM) NL3T-15604
- PART
- NL3T-15604
- SECURITY
- Crypto128
- CODING
- Yes
- CLONE
- Yes
- NOTES
- 128-bit AES encryption (NL3T- prefix). Cloning transfers As-Built. New BCM: FDRS PMI + As-Built write.
Gateway Module (GWM) NL3T-14G229
- PART
- NL3T-14G229
- SECURITY
- uds
- CODING
- Yes
- CLONE
- Yes
- NOTES
- Routes messages across CAN networks. Coordinates OTA Power-Up updates. Expanded Automotive Ethernet on SYNC 4B trims. GWM update can cascade to IPMA, PSCM, CCM, CMR - inform customer of extended programming time. Verify OTA status before programming.
Driver Door Module NL3T-14B533
- PART
- NL3T-14B533
- SECURITY
- PATS
- CODING
- Yes
- CLONE
- Yes
- NOTES
- Controls BLIS LED in driver mirror. FDRS PMI required.
Passenger Door Module NL3T-14B534
- PART
- NL3T-14B534
- SECURITY
- PATS
- CODING
- Yes
- CLONE
- Yes
- NOTES
- Controls BLIS LED in passenger mirror. FDRS PMI required.
TCU / TCM TRANSMISSION MODULES
TCU / TCM Transmission Modules
TCU - 10R80 10-Speed Auto ML3A-7Z369
- PART
- ML3A-7Z369
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- No
- CHIP/MCU
- Continental MPC5777C
- NOTES
- Requires Ford IDS/FDRS programming, ATF Mercon ULV, transmission adaptive learning 30+ drive cycles
TCU - 6R80 6-Speed Auto FL3A-7Z369
- PART
- FL3A-7Z369
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- No
- CHIP/MCU
- Continental MPC5674F
- NOTES
- Requires Ford IDS/FDRS programming, ATF Mercon LV, transmission relearn via drive cycle
ABS / BRAKE MODULES
ABS / Brake Modules
ABS/ESC Module (Bosch 9.3) NL3T-2C405
- PART
- NL3T-2C405
- CLONE
- Yes
- NOTES
- FDRS PMI on new unit. Automated bleed cycle via FDRS required after replacement. DTC C0031/C0034 common if wheel speed sensor connector disturbed during removal.
OTHER MODULES (IPC, SAS)
Other Modules (IPC, SAS)
Instrument Panel Cluster (IPC) SL3T-10849, SL3Z-10849
- PART
- SL3T-10849, SL3Z-10849
- CLONE
- Yes
- NOTES
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Steering Angle Sensor (SAS)
- CODING
- Yes
- NOTES
- INTEGRATED (clock spring)
CONNECTIVITY & ACCESSORIES
Connectivity & Accessories
APIM - SYNC 4B (12-inch display) NL3T-14G370
- PART
- NL3T-14G370
- NOTES
- FDRS PMI + FORScan As-Built. Standard on XLT/Lariat base. Not interchangeable with SYNC 4 (ML3T-) or SYNC 4A units. Coaxial cable to IPMA must be seated - DTC C1001:01 if loose.
APIM - SYNC 4B (13.2-inch portrait display) NL3T-14G370
- PART
- NL3T-14G370
- NOTES
- Available Lariat 502A and above. BlueCruise capable. 13.2-inch NOT interchangeable with 12-inch unit - different APIM part number. FDRS PMI + As-Built write.
IPC (Instrument Panel Cluster) NL3T-10849
- PART
- NL3T-10849
- NOTES
- FDRS PMI. Mileage stored in BCM on P702 - not in IPC. Full LCD configuration on upper trims.
Power Steering Control Module (PSCM) NL3T-3F641
- PART
- NL3T-3F641
- NOTES
- FDRS PMI + steering angle sensor calibration (FDRS automated routine). DTC C0051 if not recalibrated. Part of GWM software cascade on some builds.
KEY SECURITY & IMMOBILIZER
Key Security & Immobilizer
- System PATS / Smart Key
- Add Key Yes
- All Keys Lost Yes
SecuriLock PATS Gen 5 - 128-bit AES encryption (FDRS only, no generic tool support)
IMMOBILIZER MODULES
Immobilizer Modules
PATS Gen 5 (Passive Anti-Theft System)
- SECURITY
- PATS
- NOTES
- 128-bit AES encryption. FDRS only - no standalone programmer support for Gen 5. Phone as Key (UWB) available on Lariat+ but does not replace physical key programming. AKL (All Keys Lost) requires FDRS security access + parameter reset procedure.
KEY & FOB TYPES
Key & Fob Types
Proximity Smart Key Fob NL3T-15K601
- PART
- NL3T-15K601
- NOTES
- SecuriLock Gen 5 128-bit AES. All key learning via FDRS only. Min 2 working keys for add-key. AKL requires FDRS parameter reset. UWB Phone as Key (Lariat+) requires FordPass app activation - separate from physical key programming. Max 8 programmed keys.
Standard RKE Key Fob NL3T-15K601
- PART
- NL3T-15K601
- NOTES
- Same FDRS programming procedure as IAK. PEPS not available on base trims.
Replacement Notes
PATS / Smart Key system. FDRS required for key programming and module replacement - no aftermarket tool support. Pin code extractable via obd; akl supported.
ARCHITECTURE & CONNECTIVITY
Architecture & Connectivity
- Body Construction
- Aluminum body panels (Military-grade alloy series 6000), high-strength steel frame
- OBD Protocol
- ISO 15765-4 CAN-based OBD-II / ISO 14229 UDS for module programming
- CAN Architecture
- HS-CAN (500kbps), MS-CAN (125kbps), LIN buses (seat/mirror/lighting nodes), Automotive Ethernet 100BASE-T1 (SYNC 4B trims - IPMA-GWM video feed)
- Infotainment
- SYNC 4B - 12-inch standard (XL/XLT/Lariat base) / 13.2-inch portrait on Lariat 502A+, King Ranch, Platinum, Limited, Raptor
- OTA Capable
- Yes
- Infotainment Name
- Ford SYNC 4 with 5G
- Wireless CarPlay
- Yes
- Wireless Android Auto
- Yes
- Screen Upgrade
- Yes
- Screen Upgrade Notes
- 12" screen now standard across all 2025 F-150 trims. No upgrade needed.
- Wireless Upgrade
- Yes
- Wireless Upgrade Method
- ota_update
- Wireless Upgrade Notes
- Wireless Android Auto and Apple CarPlay standard on all trims.
- ECU/TCM Unlocking
- Contact us
- ECU/TCM Flashing
- Confirmed
Reviewed coverage: 2025 - 2.7L EcoBoost V6, 3.5L Ecoboost V6, 3.5L PowerBoost V6 FHEV, 5.0L Ti-VCT V8, 5.0L V8, 5.2L RAPTOR R V8.
Confirm the exact engine, ECU, and any prerequisite access method before service.
OPENPILOT / COMMA.AI
Openpilot Compatibility
Not Supported
Not supported - 2025 outside openpilot year range (2021-2023)
Not in openpilot support tree as of April 2026. Supported years: 2021-2023. Includes F-150 Hybrid PowerBoost. 2024+ facelift not yet ported.
FREQUENTLY ASKED QUESTIONS
FAQ
How much does ADAS calibration cost for a 2025 Ford F-150?
ADAS calibration pricing for a 2025 Ford F-150 depends on which of its 9 documented systems need work after a repair. This vehicle is documented with Lane Keep Assist / Lane Departure Warning (LKA/LDW), Blind Spot Information System (BLIS), Cross Traffic Alert (CTA), Adaptive Cruise Control / Pre-Collision Assist (Forward Radar), and BlueCruise (Hands-Free Highway). We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.
Can you reset the airbag light on a 2025 Ford F-150?
Yes. The 2025 Ford F-150 uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: PML3B78611D11AB. Mobile diagnosis and programming are the active service path. Mail-in bench intake is temporarily unavailable. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.
What is needed after replacing the windshield on a 2025 Ford F-150?
After windshield replacement on a 2025 Ford F-150, Lane Keep Assist / Lane Departure Warning (LKA/LDW), Adaptive Cruise Control / Pre-Collision Assist (Forward Radar), Automatic Emergency Braking (AEB), 360-Degree Camera System, and Rear View Camera rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in intake is temporarily unavailable.
How long does a 2025 Ford F-150 module service take?
Most 2025 Ford F-150 onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 18 programmable modules documented in our database (4 ECU, 4 BCM, 2 TCU, 1 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module intake is temporarily unavailable.
Do you cover the 2025 Ford F-150 on-site, or is this mail-in only?
We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, key programming, IMMO pairing, post-repair recoding, and supported module work). Mail-in module intake is temporarily unavailable. Quote the work and we will confirm the active service path for the 2025 Ford F-150. Do not ship a module unless support confirms next steps.
What kind of warranty do you offer on 2025 Ford F-150 programming?
Every programming, cloning, and calibration job on the 2025 Ford F-150 is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
Can you program a 2025 Ford F-150 with no working keys (all-keys-lost)?
Yes - all-keys-lost is supported on the 2025 Ford F-150. Immobilizer generation on this platform: PATS / Smart Key. Adding a key (with a working key already in hand) is also supported - typically faster and less expensive than an all-keys-lost reset. Submit the VIN and we will confirm the procedure and quote before scheduling.
Which modules on a 2025 Ford F-150 can you actually service?
We program, clone, repair, or replace the full programmable-module stack on a 2025 Ford F-150. For this vehicle our database documents:
- 4 engine control (ECU/PCM)
- 2 transmission control (TCU/TCM)
- 4 body control (BCM and related)
- 1 ABS / brake control (EBCM)
- 1 immobilizer / security
- 2 key & fob
- 1 instrument cluster (IPC)
- 1 steering angle sensor (SAS)
- 9 ADAS module
Infotainment on this platform: Ford SYNC 4 with 5G. Send the VIN and the operations performed and we will confirm support and pricing.
Additional Module Part Numbers
Additional OEM-sourced part numbers for the 2025 Ford F-150 covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.
- ADAS Module Part Numbers
- NL3T-14G647, CAMERA MODULE NL3T-19H406-X, NL3T-14C689-X (L), NL3T-14C690-X (R), NL3T-9G768, NL3T-19G490, BUMPER-MOUNTED SENSORS (6 FRONT
- ECU / PCM Part Numbers
- NL3T-12A650, ~325 HP), 3.5L ECOBOOST V6 TT (~400 HP STANDARD, 5.0L COYOTE V8 TI-VCT (~400 HP), 3.3L TI-VCT V6 (BASE, ~290 HP)
- BCM / Body Module Part Numbers
- NL3T-15604, NL3T-14G229, NL3T-14B533, NL3T-14B534
- TCU / TCM Part Numbers
- ML3A-7Z369, FL3A-7Z369
- SRS / Airbag Module Part Numbers
- PML3B78611D11AB, FL3B15043B13AG, FL3B78611D10AB, ML3B18042D95AF, ML3B18042D94AF
- ABS / EBCM Part Numbers
- NL3T-2C405-A
- Instrument Cluster (IPC) Part Numbers
- SL3T-10849, SL3Z-10849
- Transmission Control Module (TCM) Part Numbers
- ML3A-7Z369, FL3A-7Z369
Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.
Different trim or build?
Send your VIN and we'll confirm exact module support and pricing in the quote response.
Hit a security wall? We've got the keys.
1-year unlimited warranty on every flash and calibration.
Shared module fitment
Vehicles sharing modules with the 2025 Ford F-150
These vehicles use one or more of the same replacement modules indexed for this vehicle.