Onsite equipment
Launch Throttle V with ADAS
Diagnostic and ADAS setup, with Launch X-PROG 3 available for supported programming work.
Email a request for Launch Throttle V with ADASThe equipment. The operator. Your shop.
Onsite Tools Availability
Need us to bring and operate a tool for you? Core Auto Logic brings specialist diagnostic, tuning and bench equipment to shops across Dallas-Fort Worth for the job you need completed.
Tell us the vehicle, tool and task. Equipment, licenses, technician availability and job requirements are confirmed before scheduling.
Book the tool with someone to run it
A tuning shop may need a Master setup for one ECU. A repair shop may need a programmer, adapter or factory-software session to finish a module replacement. Tell us the result you need and we will confirm the right onsite setup.
We bring and operate the equipment for the agreed work. Any customer-supplied files, vehicle preparation and follow-up checks are discussed before the session.
High-end scan tools & ADAS
Bring advanced diagnostics to the bay you already work in. We confirm vehicle coverage, required accessories and the workspace before scheduling an ADAS procedure.
Onsite equipment
TOPDON Phoenix Max with ADAS
Diagnostic and ADAS setup, with T-Ninja Box available for supported work.
Email a request for TOPDON Phoenix Max with ADASOnsite equipment
Autel IM608 II with XP400 Pro
Tell us the vehicle and operation you need. Security-related procedures require documentation and an agreed complete job.
Email a request for Autel IM608 II with XP400 ProADAS Equipment Rental
Our ADAS stands and equipment are fully booked, but please inquire for target rentals.
Tuning hardware & software
Have a tuning or repair job that needs a particular setup? We bring and operate the agreed equipment. File preparation, licensing, credits and the work to be performed are confirmed in the quote.
All licenses
Magicmotorsport FLEX / FLEXBOX Master
Our Master setup has all licenses. Send the ECU or TCU identity so we can confirm the supported protocol, connection method and procedure.
Email a request for Magicmotorsport FLEX / FLEXBOX MasterOnsite equipment
HP Tuners Master
Request an operated HP Tuners session for your shop. Vehicle support, licensing or credits, and the supplied file are reviewed before booking.
Email a request for HP Tuners MasterMost modules licensed
Scanmatik / PCMflash
Our Scanmatik / PCMflash setup includes most modules. Send the specific PCMflash module and controller identity so we can confirm the required license and connection.
Email a request for Scanmatik / PCMflashSoftware session
WinOLS
Request help with your calibration-file workflow. File editing and vehicle flashing are separate operations; we agree the scope before work begins.
Email a request for WinOLSOnsite equipment
Alientech KESS & KTAG
Send the vehicle, ECU or TCU and requested operation so we can confirm the applicable unit, licenses and connection method.
Email a request for Alientech KESS & KTAGBench & module tools
For jobs that need more than an OBD connection. Share the module label and the task first; adapters, pinouts, condition and supported functions determine the setup.
Onsite equipment
OBDSTAR DC706
Request a supported ECU or module programming procedure. We review the exact module and required connection.
Email a request for OBDSTAR DC706Onsite equipment
OBDStar ECU Master A/B/C/D
Ask which configuration and accessories fit the module you need us to work on.
Email a request for OBDStar ECU Master A/B/C/DOnsite equipment
Xhorse VVDI2
Procedure and vehicle coverage are reviewed for each request. Security work remains subject to the documentation and full-job policy below.
Email a request for Xhorse VVDI2Onsite equipment
CGDI F70
Request a compatibility review for the specific module and procedure.
Email a request for CGDI F70Contact to verify license availability
ABRITES
Contact us with the module and required operation to verify license availability.
Email a request for ABRITESEEPROM, flash & MCU programmers
Need chip-level access for a module repair? Send the chip markings, module label and the read, write or recovery task. We confirm device support, adapters and the connection method before accepting the job. General programmers marked Contact for availability are listed so we can verify the exact device your job requires.
Onsite equipment
Xhorse Multi-PROG
Request EEPROM or controller programming with our Multi-PROG setup. Exact chip support and the required accessories are checked for your module.
Email a request for Xhorse Multi-PROGOnsite equipment
CGDI CG100X
Send the chip and module identification for a programming or data-recovery compatibility review.
Email a request for CGDI CG100XWith our IM608 II setup
Autel XP400 Pro
Supported EEPROM and MCU read/write work using our XP400 Pro. Required adapters and security-related procedures are reviewed before booking.
Email a request for Autel XP400 ProWith our Launch setup
Launch X-PROG 3
Tell us which chip or controller needs work so we can check support and the required accessories.
Email a request for Launch X-PROG 3Contact for availability
SEGGER J-Link / J-Flash SPI
JTAG/SWD debug and flash programming probe for supported microcontrollers, with direct SPI flash support on applicable setups. J-Link is not a universal socket EEPROM programmer, so send the exact device and interface.
Email a request for SEGGER J-Link / J-Flash SPIContact for availability
Microchip MPLAB PICkit 5
In-circuit programming and debugging for supported PIC, dsPIC, AVR and SAM devices. Send the full chip marking and board connection details.
Email a request for Microchip MPLAB PICkit 5Contact for availability
XGecu T48 / T56 / T76
General-purpose universal IC programmers. Device support, socket adapter and whether the chip must be removed or can be programmed in circuit are checked first.
Email a request for XGecu T48 / T56 / T76Contact for availability
Xeltek SuperPro
Universal IC programmer family for supported EEPROM, flash and microcontroller devices. The exact chip and package determine the model and adapter needed.
Email a request for Xeltek SuperProContact for availability
Elnec BeeProg4 / BeeProg4C
Universal programmers with socket and in-system programming options for supported memory and microcontroller devices.
Email a request for Elnec BeeProg4 / BeeProg4COBD & factory programming interfaces
Need an OBD interface and someone to operate it? Find the major factory and pass-through tools below, then contact us with the vehicle and task. Entries marked Contact for availability require confirmation of the specific hardware, software and licenses before booking.
Onsite equipment
GM MDI2
For Chevrolet, GMC, Buick and Cadillac diagnostic and factory programming requests. Send the vehicle and operation to confirm the appropriate GM software.
Email a request for GM MDI2Contact for availability
GM MDI / Tech 2
Legacy GM diagnostic equipment requests. Tell us the model year and module so we can verify the required hardware and software.
Email a request for GM MDI / Tech 2Contact for availability
Ford VCM II / VCM3 / VCMM
Ford and Lincoln factory diagnostic interfaces. We check the requested device and IDS or FDRS workflow against the vehicle and task.
Email a request for Ford VCM II / VCM3 / VCMMContact for availability
Mopar Diagnostic Pod / microPod II
Chrysler, Dodge, Jeep and Ram wiTECH interface requests. The vehicle and procedure determine whether MDP or legacy microPod II hardware is appropriate.
Email a request for Mopar Diagnostic Pod / microPod IIContact for availability
Tesla diagnostic adapters
Model-specific diagnostic connection cables and adapters for a Toolbox session. Send the model and year so we can verify the required connection kit.
Email a request for Tesla diagnostic adaptersOnsite equipment
VW / Audi VAS 6154A
Request our VAS 6154A setup for an operated VW or Audi ODIS session. Online functions and vehicle eligibility are confirmed for the job.
Email a request for VW / Audi VAS 6154AContact for availability
VW / Audi VAS 5054A
Legacy VW and Audi diagnostic interface requests. Confirm the vehicle and software requirements with us before booking.
Email a request for VW / Audi VAS 5054AContact for availability
Nissan / Infiniti CONSULT VI2 / VI3
Factory vehicle interfaces for CONSULT sessions. CONSULT-III plus supports VI2 or VI3; the factory CONSULT 4 setup uses VI3. We confirm the exact workflow for your vehicle.
Email a request for Nissan / Infiniti CONSULT VI2 / VI3Contact for availability
Honda / Acura Antares Capsule
Honda Antares Capsule (HAC) interface requests for Honda and Acura i-HDS diagnostics and reprogramming. Contact us with the vehicle and required procedure.
Email a request for Honda / Acura Antares CapsuleContact for availability
Honda / Acura DST-i / DST-nano / MVCI
Legacy Honda and Acura interface requests. Send the vehicle and job details to verify the required device and compatible software.
Email a request for Honda / Acura DST-i / DST-nano / MVCIContact for availability
Tactrix OpenPort 2.0
J2534 pass-through interface requests. Tell us the vehicle, software and operation so we can confirm compatibility and availability.
Email a request for Tactrix OpenPort 2.0Most modules licensed
Scanmatik / PCMflash
Our Scanmatik interface and PCMflash setup. Send the controller and requested protocol to confirm the required license, cables and connection method.
Email a request for Scanmatik / PCMflashOnsite equipment
TOPDON RLink
Our J2534 pass-through interface for supported factory-software workflows. We check the manufacturer software and vehicle requirements before scheduling.
Email a request for TOPDON RLinkNASTF Vehicle Security Professionals
Documentation and the complete job are required
We do not provide standalone access to NASTF VSP credentials or log in so another party can carry out a restricted procedure. For work requiring those credentials, we must review the required ownership and authorization documentation and perform the full job that requires the credentials.
We do not share or rent credentials. Required manufacturer permissions and vehicle eligibility are reviewed before accepting the work.
We are unable to provide remote VSP services.
Factory service software
How an onsite tool session works
Tell us the job
Send the vehicle details, module identification, requested tool and operation, shop location and preferred date.
Confirm the setup
We check compatibility, licenses, documentation and workspace needs, then quote the session and confirm availability.
We bring the tool
If the license allows, you can rent the tool or have our technician perform the work onsite.
Keep your repair moving
Send the job details. We will confirm what we can bring and operate at your shop.
All work requiring VSP credentials must be performed using your own credentials. If you need our credentials, our technician must verify all documentation and perform the entire job
Don't see a tool listed? We probably have it. Let us know what you need to do and we can suggest a tool. Some equipment cannot be removed from our shop.