Skip to main content
ADAS Sub-Service

Automatic Emergency Braking Calibration

DFW Mobile ADAS calibration for collision shops, glass installers and alignment bays.

AEB calibration after collision repair or sensor replacement: camera and radar aimed in factory sequence and the braking chain verified before delivery. Onsite across DFW with a signed report.

Request Calibration Call a Tech

Onsite only - calibration is on-vehicle. Most quotes are returned in under 4 business hours.

Automatic Emergency Braking Calibration
TARGET / OEM SPEC
Flat-rate pricing - confirmed before any work begins
Quotes are free - no obligation.
Quotes returned in under 4 business hours
Start a Quote

Why Collision Shops Certify AEB Through Core Auto Logic

Automatic emergency braking is the feature a customer never tests until the worst moment. After repair, the only honest answer to "does it work?" is a documented factory calibration.

Request a Quote
Every Sensor in the Chain
Camera aim, radar aim, and fusion agreement verified in the factory sequence - no single-sensor shortcuts on a braking system.
FULL CHAIN
Verified Before Delivery
Aim values checked against tolerance and the OEM dynamic confirmation run where required - before the customer needs it on the freeway.
VERIFIED
Liability-Grade Paper Trail
Per-sensor results on a signed report with pre- and post-scans - what a DRP audit, an insurer, or a courtroom asks for.
DOCS
Mobile Service Across the DFW Metroplex
We bring the target boards, tripods and OEM scan tools to your bay. The work order stays with your shop. We confirm any static setup and required road procedure before starting.
Dallas Fort Worth Plano Arlington Irving Frisco McKinney Denton
DFW METRO COVERAGE
DFW ROUTE

How Onsite Automatic Emergency Braking Calibration Works

ADAS calibration requires the vehicle. We bring targets and software to your DFW location, confirm the workspace, and perform any required static setup and road procedure.

We Come to Your Shop

Mobile tech arrives with OEM Software and Custom Tools, calibration targets and a J2534 interface.

  1. Schedule a visitOnsite work is typically scheduled within 24-48 hours; same-day may be available
  2. Tech arrives on-siteRoute window confirmed before arrival, targets and tooling in the van
  3. Calibrate to OEM specStatic and dynamic procedures per the factory service manual
  4. Verification & reportPost-scan and calibration report before we leave
COVERAGE
DFW Metroplex
Dallas, Fort Worth, Plano, Arlington, Frisco, Irving
Request Calibration

What to have ready

We confirm the vehicle, workspace, and required procedures before scheduling a visit.

  • Your vehicle and repairSend the VIN or year, make, and model, plus what was repaired or replaced. Include a scan report if available.
  • Your service locationTell us the address, available bay space, floor condition, lighting, and alignment status. We confirm the setup required for your vehicle.
  • Your preferred timingRequest a convenient window. Static calibration is performed at the vehicle; a road procedure may also be required.

A quote request does not confirm an appointment. We will confirm scope, price, and availability with you.

What happens next

From your request to completed work and documentation.

  1. Request a Quote - Under 4 Business HoursSend the vehicle and the repair history - what was hit, what was replaced, what the cluster shows. We confirm which sensors feed AEB on that platform and quote the full sequence.
    Request a Quote - Under 4 Business Hours - Core Auto Logic automatic-emergency-braking-calibration step 1
  2. Schedule On-Site ArrivalTargets, radar fixtures, and the scan platform come to your bay anywhere in DFW - no dealer shuttle, no days off the lot.
    Schedule On-Site Arrival - Core Auto Logic automatic-emergency-braking-calibration step 2
  3. Calibrate and Prove the SystemCamera and radar are aimed in the factory-specified order, then the AEB chain is verified: zero DTCs, aim values inside tolerance, and the OEM dynamic confirmation where required.
    Calibrate and Prove the System - Core Auto Logic automatic-emergency-braking-calibration step 3
  4. Documentation DeliveredPre-scan, post-scan, and a signed per-sensor calibration report - the proof of function that closes the repair order defensibly.
    Documentation Delivered - Core Auto Logic automatic-emergency-braking-calibration step 4

Frequently Asked Questions

Re-aiming every sensor the automatic braking decision depends on - typically the windshield camera, the front radar, or both - in the order the OEM specifies, then verifying the system end to end. On fusion platforms the two sensors must agree on the same target or the system degrades silently.
The accepted standard is a completed factory calibration with aim values inside tolerance, a clean post-scan, and the OEM-specified dynamic verification where applicable. That documented chain is what insurers and OEM position statements recognize as proof of function.
After frontal collision work, yes. Sensor mounts shift inside cosmetically perfect bodywork without setting a code, and an AEB that brakes a fraction late looks exactly like an AEB that works - until it matters. Position statements require post-collision calibration regardless of DTC status.
Usually a radar or camera aimed slightly off-axis, so stationary roadside objects read as in-path targets. It is the highest-liability calibration symptom there is, and a measured re-aim with documented values is the fix path - not desensitizing or disabling the system.
A combined camera-plus-radar calibration with verification typically runs 2-4 hours on-site. Single-sensor jobs are shorter. Every job carries the one-year unlimited-miles guarantee, so a returning symptom comes back to us, not your bays.

Everything covered in this service

The agreed work is verified and documented before the job is completed.

OEM Target Kits - Not Generic
TARGET
Factory-specification target kits for Toyota, Honda, Ford, GM, Stellantis, Hyundai, VAG, and Mercedes-Benz. Generic universal targets fail on radar-first and Ethernet-sensor systems.
Insurance-Ready Documentation
DOC
Every calibration includes a pre-scan report, a post-scan confirmation, module version logs, and a signed calibration success code summary acceptable to all major insurance carriers.
Mobile Service - We Come to Your Bay
MOBILE
We bring target boards, measuring tools, and scan tools to your location across the DFW Metroplex. We confirm the required workspace and any static calibration or road procedure before the visit.
Static + Dynamic in One Visit
STATIC-DYN
We handle both the target-board static alignment and any required dynamic drive cycle in one visit so the vehicle leaves your shop road-ready.
10+ Calibration Types Covered
SYSTEMS
Forward camera, front and corner radar, 360° surround-view, backup camera, parking ultrasonic arrays, HUD re-alignment, night vision, and steering-angle reset all in scope.
1-Year Unlimited Guarantee
GUARANTEE
Every calibration is backed by a full one-year unlimited-miles guarantee. If the calibration is the issue, we return and resolve it at no charge.

Common reasons customers book this service

Tap a card to see what triggers this service and which systems are affected.

After any frontal repair, the sensors that decide when the vehicle brakes for an obstacle must be recalibrated and the system verified - OEM position statements require it before the vehicle goes back to the customer.
AEB fuses what the camera sees with what the radar tracks. Replacing either sensor means re-aiming it to this vehicle and confirming the pair agrees before automatic braking can be trusted.
A pre-collision warning light, braking that triggers on overpasses or shadows, or warnings that arrive late are all calibration symptoms - and exactly the complaints that bring a vehicle straight back to your shop.
Tools and technical coveragePlatform access, equipment, and procedure details
PLATFORM INTELLIGENCE

How we plan this service

We use the VIN, repair details, and equipped systems to choose the access path and service workflow before the job starts.

ADAS calibration

Static vs dynamic procedure planning

Exact-year release rows confirm that late-model ADAS work can require a mix of target-board setup, subscription-gated static routines, and manufacturer drive cycles.

Module family
Forward camera and radar systems
Access method
Target setup plus road procedure when required
Workflow
Static or dynamic calibration
What to send

Send the VIN, repair operation, alignment status, tire size changes, and whether a windshield, bumper, sensor, or suspension component was replaced.

Diagnostics and secure gateway access

Secure gateway and DoIP checks

Some late-model ADAS and diagnostic sessions require secure authorization or Ethernet diagnostics before calibration routines can be completed.

Module family
Late-model networked ADAS
Access method
Secure gateway, DoIP, or OEM authorization may be required
Workflow
Authorization and diagnostic session planning
What to send

Confirm the VIN, module being calibrated, battery support availability, and whether previous scans mention gateway, DoIP, or seed-key access.

ADAS calibration

Target-board selection before arrival

The ADAS target catalog preview includes printed boards, flexible mats, OEM-specific target sets, and radar corner reflectors. We use that as a setup checklist, not as a promise that one target fits every vehicle.

Module family
Static targets and radar reflectors
Access method
Static target setup
Workflow
Target-board selection
What to send

Send the VIN, sensor being calibrated, repair operation, workspace dimensions, lighting notes, and any target or fixture already on hand.

TOOL CAPABILITY MATRIX

Capable platforms for this work

Representative platforms we use to choose the calibration path, target setup, and subscription access for camera, radar, blind-spot, and surround-view work.

Static and dynamic ADAS calibration
AFTERMARKET PLATFORM
Autel, Launch Tech, Topdon Used when Autel coverage supports the procedure; late-model gaps can still require OE access.
Coverage varies by vehicle
Source basis: Autel, Launch Tech, and Topdon scanner-vendor capability documentation.
ADAS target setup and guided calibration
AFTERMARKET PLATFORM
Autel, Launch Tech, Topdon Useful for guided aftermarket calibration coverage and setup verification.
Coverage varies by vehicle
Source basis: Autel, Launch Tech, and Topdon scanner-vendor capability documentation.
Late-model Ford camera and radar routines
OEM SOFTWARE
Ford FDRS with VCM Factory routines require Ford access when the calibration is not exposed through aftermarket coverage.
No practical workaround
Source basis: Ford Diagnostic and Repair System service software documentation.
ADAS scan, topology, and pre-check support
AFTERMARKET PLATFORM
Autel, Launch Tech, Topdon Used for scan, topology, and ADAS workflow support where coverage is confirmed.
Coverage varies by vehicle
Source basis: Autel, Launch Tech, and Topdon scanner-vendor capability documentation.

Failure Indicators

Symptoms that automatic emergency braking is running out of calibration.

Phantom Braking
The vehicle brakes hard for overpasses, shadows, or parked cars on a curve.
Late or No Warnings
Pre-collision alerts arrive late or never in situations that used to trigger them.
AEB Lamp After Repair
The pre-collision warning light stays on once the bodywork is done.
System Unavailable Messages
AEB reports itself off in clear weather - a sensor the module no longer trusts.

Built around what your shop actually needs.

About this service.

Service guarantee

A 1-year unlimited-mile warranty on our work.

If a defect in our calibration or programming work appears, contact us so we can put it right at no charge. We confirm coverage for your specific job before work begins.

1-Year Unlimited Miles
Coverage for our completed service
Clear Scope and Pricing
Approve the scope and charges before work begins
Workmanship support
Contact us about a defect in our work
Direct Tech Line
Talk with our service team

Ready to get this calibrated and back on the road?

Request onsite calibration in DFW. We confirm the location and appointment after reviewing your request. Most quotes are returned in under 4 business hours.

Request Calibration (945) 382-4065