We provide the software and equipment for the agreed work. The exact tool and procedure depend on your year, VIN and module.
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
DFW Mobile Service
DFW Serving Dallas / Fort Worth
3rd Gen DM - 2013-2018 generation coverage
2013-2018 Hyundai Santa Fe service guide ADAS Calibration & Module Programming
Choose a repair service below or find your module by part number. Onsite help is available in Dallas-Fort Worth, with mail-in module service nationwide.
What do you need fixed?
Choose a service to start your quote.
Find your module
58 documented Hyundai Santa Fe module records across the 2013-2018 generation. Search by module name or part number, then open a result for requirements and repair options.
No matching records. Try a shorter part number or clear the filters. You can still request help if your module is not listed.
ECU / Engine
ECM - 2.4L Theta II I4 / 3.3L Lambda V6 / 2.0L Theta II GDI Turbo Verify by VIN 2013-2014
Documented for 2013-2014 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2013, 2014
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Notes
- Hyundai Santa Fe ECM. GDS Mobile IMMO registration.
ECM/PCM - gasoline engine, VIN-specific Verify by VIN 2015-2018
Documented for 2015-2018 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2015, 2016, 2017, 2018
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Protocol / method
- Hyundai GDS / J2534 where supported
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Verify exact ECM hardware by VIN
- Notes
- Verify engine, emissions family, transmission, and calibration suffix by VIN before ordering or flashing. VIN registration, immobilizer sync, throttle/idle learn, and readiness checks may be required.
TCM/PCM transmission control - if separate/equipped Verify by VIN 2015-2018
Documented for 2015-2018 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2015, 2016, 2017, 2018
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Protocol / method
- Hyundai GDS / OEM service information
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Verify exact transmission-control hardware by VIN
- Notes
- Follow the VIN-specific relearn, adaptive reset, fluid-temperature, and road-test procedure for the equipped transmission.
TCM / Transmission
TCU - A6LF2 6-Speed Auto 3 records
J2534
Documented for 2013-2014 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2013, 2014
Donor must match part family 954402W3 - requires cloning
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 954402W3
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Renesas SH7058
- Notes
- VIN coding required, TCM adaptation procedure needed, SP-IV ATF specification, KDS tool recommended
J2534
Documented for 2015-2016 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2015, 2016
Donor must match part family 95440-2W0 - requires cloning
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 95440-2W0
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Renesas SH7058
- Notes
- Requires VIN coding and shift point adaptation. Use ATF SP-IV or equivalent. TCU relearn via HDS or compatible tool required after installation.
J2534
Documented for 2017-2018 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2017, 2018
Donor must match part family 95440-2W0 - requires cloning
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 95440-2W0
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Renesas SH7058
- Notes
- Requires VIN coding and TCU relearn via GDS-II tool. Use SP-IV ATF fluid. Perform idle relearn after installation.
TCU - A6LF1 6-Speed Auto Verify by VIN 2013-2014 1 record
Documented for 2013-2014 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2013, 2014
Donor must match part family 954402W2 - requires cloning
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 954402W2
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Renesas SH7058
- Notes
- VIN coding required, shift point adaptation needed, SP-IV ATF specification, KDS tool recommended
TCU - A6GF1 6-Speed Auto Verify by VIN 2015-2016 1 record
Documented for 2015-2016 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2015, 2016
Donor must match part family 95440-2W1 - requires cloning
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 95440-2W1
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Renesas SH7058
- Notes
- AWD variant requires different coding. ATF SP-IV specification. Shift adaptation and clutch point learning required via GDS or equivalent.
TCU - A6LF3 6-Speed Auto Verify by VIN 2017-2018 1 record
Documented for 2017-2018 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2017, 2018
Donor must match part family 95440-2W1 - requires cloning
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 95440-2W1
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Renesas SH7058
- Notes
- Requires VIN coding and TCU adaptation via GDS-II tool. Use SP-IV ATF fluid. Temperature sensor calibration needed.
TCU - A8LF1 8-Speed Auto Verify by VIN 2017-2018 1 record
Documented for 2017-2018 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2017, 2018
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 95440-2W2
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Continental MPC5748G
- Notes
- Security locked module requires original TCU. VIN/ISK coding mandatory via GDS-II. Use SP-IV-M ATF fluid. Clutch adaptation required.
BCM / Body electronics
BCM (Body Control Module) Verify by VIN 2013-2014
Documented for 2013-2014 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2013, 2014
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Notes
- Hyundai/Kia BCM. GDS Mobile coding after replacement.
Body Control Module (BCM) - VIN-specific Verify by VIN 2015-2018
Documented for 2015-2018 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2015, 2016, 2017, 2018
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Notes
- GDS variant coding and option configuration may be required after replacement. Verify locks, lighting, RKE, alarm, and immobilizer interfaces after programming.
Smart Key ECU / RKE receiver - if equipped Verify by VIN 2015-2018
Documented for 2015-2018 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2015, 2016, 2017, 2018
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Notes
- All registered keys may be required after Smart Key ECU replacement. Use Hyundai security authorization and GDS procedures where required.
SRS / Airbag
SRS Control Module (SRSCM) 23 records
Under center console
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2013, 2014, 2015, 2016, 2017, 2018
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 84530-B8500
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
Under center console
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2013, 2014, 2015, 2016, 2017, 2018
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 11254-06253
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
Under center console
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2013, 2014, 2015, 2016, 2017, 2018
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 11254-06201
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
Under center console
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2013, 2014, 2015, 2016, 2017, 2018
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 85010-B8000
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
Under center console
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2013, 2014, 2015, 2016, 2017, 2018
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 85020-B8000
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
Under center console
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2013, 2014, 2015, 2016, 2017, 2018
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 56970-B8000-RYN
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
Under center console
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2013, 2014, 2015, 2016, 2017, 2018
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 56970-B8000-NBC
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
Under center console
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2013, 2014, 2015, 2016, 2017, 2018
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 56900-B8000-NBC
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
Under center console
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2013, 2014, 2015, 2016, 2017, 2018
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 56900-B8000-RYN
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
Under center console
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2013, 2014, 2015, 2016, 2017, 2018
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 13271-06001
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
Under center console
Documented for 2013-2015 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2013, 2014, 2015
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 13385-06001
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
Under center console
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2013, 2014, 2015, 2016, 2017, 2018
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 13395-06001
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
Under center console
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2013, 2014, 2015, 2016, 2017, 2018
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 84530-4Z500
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
Under center console
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2013, 2014, 2015, 2016, 2017, 2018
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 11254-06161
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
Under center console
Documented for 2013-2015 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2013, 2014, 2015
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 11253-06203
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
Under center console
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2013, 2014, 2015, 2016, 2017, 2018
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 85010-4Z000
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
Under center console
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2013, 2014, 2015, 2016, 2017, 2018
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 85020-4Z000
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
Under center console
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2013, 2014, 2015, 2016, 2017, 2018
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 56970-4Z000-NBC
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
Under center console
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2013, 2014, 2015, 2016, 2017, 2018
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 56970-4Z000-RYN
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
Under center console
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2013, 2014, 2015, 2016, 2017, 2018
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 56900-4Z000-NBC
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
Under center console
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2013, 2014, 2015, 2016, 2017, 2018
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 56900-4Z000-RYN
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
Under center console
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2013, 2014, 2015, 2016, 2017, 2018
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 13273-06001
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
Under center console
Documented for 2013-2015 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2013, 2014, 2015
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 13396-06001
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
ABS / Brakes
ABS/ESC Module (HECU) Verify by VIN 2013-2014
Documented for 2013-2014 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2013, 2014
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Notes
- Hyundai/Kia HECU. GDS Mobile bleed procedure + sensor relearn.
Wheel Speed Sensor - Front (each) Verify by VIN 2013-2014
Documented for 2013-2014 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2013, 2014
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Notes
- Active. C1200/C1201 series DTC.
Wheel Speed Sensor - Rear (each) Verify by VIN 2013-2014
Documented for 2013-2014 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2013, 2014
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Notes
- Active sensor.
ABS/ESC Module (HECU) - VIN-specific Verify by VIN 2015-2018
Documented for 2015-2018 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2015, 2016, 2017, 2018
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Notes
- GDS initialization, brake bleed, variant coding, and DTC checks may be required after replacement. Run steering-angle or ESC relearn when specified by the repair manual.
Steering Angle Sensor (SAS) - if equipped/separate Verify by VIN 2015-2018
Documented for 2015-2018 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2015, 2016, 2017, 2018
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Notes
- Perform GDS SAS zero-point reset after alignment, steering work, or ABS/ESC service when specified.
Wheel Speed Sensors Verify by VIN 2015-2018
Documented for 2015-2018 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2015, 2016, 2017, 2018
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
Other modules
Instrument Panel Cluster (IPC) 7 records
Documented for 2013 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2013
Donor must match part family 94003-2W010 - requires cloning
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 94003-2W010
- Cloning supported
- Yes
- Notes
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Documented for 2014 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2014
Donor must match part family 94003-2W020 - requires cloning
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 94003-2W020
- Cloning supported
- Yes
- Notes
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Documented for 2015-2017 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2015, 2016, 2017
Donor must match part family 94003-2W000 - requires cloning
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 94003-2W000
- Cloning supported
- Yes
- Notes
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Documented for 2015-2016 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2015, 2016
Donor must match part family 94003-2W100 - requires cloning
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 94003-2W100
- Cloning supported
- Yes
- Notes
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Documented for 2017 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2017
Donor must match part family 94003-2W110 - requires cloning
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 94003-2W110
- Cloning supported
- Yes
- Notes
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Documented for 2018 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2018
Donor must match part family 94003-S2000 - requires cloning
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 94003-S2000
- Cloning supported
- Yes
- Notes
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Documented for 2018 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2018
Donor must match part family 94003-S2010 - requires cloning
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 94003-S2010
- Cloning supported
- Yes
- Notes
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Steering Angle Sensor (SAS) 2 records
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2013, 2014, 2015, 2016, 2017, 2018
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Coding required
- Yes
- Notes
- INTEGRATED (clock spring / steering column module
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2013, 2014, 2015, 2016, 2017, 2018
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Coding required
- Yes
- Notes
- cross-year extension)
Connectivity / Accessories
Other 7 records
Documented for 2013-2014 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2013, 2014
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- (DCM - MX5 DATA COMMUNICATION MODULE)
- Notes
- Remote start, stolen vehicle locate, OTA software updates (MX5 expanded OTA capability). Active Blue Link subscription required. DCM replacement: GDS network module registration using MX5 procedure.
Documented for 2013-2014 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2013, 2014
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- (OBC - MX5 ON-BOARD CHARGER
- Notes
- MX5 PHEV or Hybrid variant. GDS OBC programming after replacement. Verify Level 1 and Level 2 charging. HV safety protocols mandatory.
Documented for 2013-2014 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2013, 2014
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- (VERIFY VIA GDS - MX5 UPPER TRIMS)
- Notes
- Camera-based BVM system in digital cluster. GDS BVM initialization after camera replacement. Verify image display in cluster when signaling. MX5-specific feature not present on TM gen.
Documented for 2013-2014 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2013, 2014
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- (SHARED MX5 BSD RADAR ~99140, 99150-S8)
- Notes
- RCCA processed by MX5 rear BSD radars. BSD radar procedure covers RCCA. Verify active in reverse with cross-path object.
Documented for 2013-2014 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2013, 2014
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- (VERIFY VIA GDS - MX5 CAMERA SYSTEM)
- Notes
- Standard backup camera on all MX5. Upper trims may include 360 SVM. GDS camera registration if replaced. MX5 camera system may differ from TM - verify via GDS VIN lookup.
Documented for 2015-2018 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2015, 2016, 2017, 2018
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Notes
- Accessory and connected-equipment content varies by trim, market, and dealer installation.
Documented for 2015-2018 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2015, 2016, 2017, 2018
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Notes
- Follow Hyundai service information for initialization, variant coding, and DTC checks after replacement.
Reference information for 2013-2018. Coverage can vary by year and equipment. Confirm the VIN and full part number before ordering a replacement.
Vehicle overview
- Vehicle
- Hyundai Santa Fe
- Model years
- 2013-2018
- Generation
- 3rd Gen DM
Tools we use for this vehicle
Factory scan, coding, and calibration access
Hyundai GDS Mobile / Hyundai KDS
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
ADAS scan, setup, and verification
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Bench cloning and chip-level recovery
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Tool requirements
Basic OBD2 scanner
View capabilities and limitations
Supported work
- Read codes on SRS systems (23 documented rows)
- Read codes on ECU systems (3 documented rows)
- Read codes on BCM systems (3 documented rows)
- Read codes on TCU / TCM systems (7 documented rows)
- Read codes on ABS systems (6 documented rows)
- Read codes on IPC / SAS systems (9 documented rows)
- Read codes on Keys systems (4 documented rows)
- Read codes on Immobilizer systems (3 documented rows)
- Read codes on Accessory systems (7 documented rows)
Factory programming software (J2534)
View capabilities and limitations
Supported work
- Factory scan, coding, and calibration access: Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
Know this platform
This platform uses Hyundai CAN architecture for DM/NC-generation Santa Fe/Santa Fe Sport; OBD-II DLC ISO 15765-4 CAN. Verify exact network topology by VIN in Hyundai service information. with ISO 15765-4 CAN (500 kbps).
- CAN
- Hyundai CAN architecture for DM/NC-generation Santa Fe/Santa Fe Sport; OBD-II DLC ISO 15765-4 CAN. Verify exact network topology by VIN in Hyundai service information.
- OBD
- ISO 15765-4 CAN (500 kbps)
CAN architecture varies by year
Generation service summary for Hyundai Santa Fe 3rd Gen DM (2013-2018)
Generation coverage
This page consolidates Hyundai Santa Fe service data for 2013-2018 across 6 model years; service information is available for 6 years.
Choose a yearADAS coverage
Merged ADAS coverage includes 11 system records, including Rear View Camera (2013-2014), Blind Spot Monitoring (2013-2014), Forward Collision Warning / AEB (2013-2014), and Lane Departure Warning (2013-2014). Year-marked systems apply only to the shown range.
View ADAS dataCalibration triggers
This generation has 8 merged calibration trigger records. Trigger applicability can vary by year - verify by VIN before setup.
View triggersProgrammable modules
The merged generation page indexes 58 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, IPC coverage. Part numbers are confirmed for the exact year/VIN.
View modulesCore Auto Logic capability
Core Auto Logic supports generation-level diagnostics, ADAS calibration, module programming, and security-access planning for the Hyundai Santa Fe 2013-2018 span, with exact-year validation before service. Mail-in module service is available nationwide.
Get a quoteDo I need calibration?
ECM Replacement 1
2013-2014
Yes
GDS Mobile IMMO registration + throttle position learn.
ABS/HECU Replacement 1
2013-2014
Yes
GDS Mobile bleed + WSS relearn.
Windshield or forward camera service - if equipped 1
2015-2018
Verify equipped ADAS by VIN. If a forward camera is present, use the Hyundai service information and GDS calibration routine for the exact model year, trim, and build.
Radar, blind-spot, or parking sensor service - if equipped 1
2015-2018
Run GDS initialization or aiming when required by Hyundai service information after sensor, bracket, bumper, or structural repair.
ABS/ESC or HECU replacement 1
2015-2018
Perform GDS setup, brake bleed, SAS/ESC relearn, and DTC-free road test as specified.
BCM, Smart Key ECU, or RKE module replacement 1
2015-2018
Use GDS variant coding and Hyundai security authorization where required. Verify all customer keys and option functions after service.
ECM/PCM replacement 1
2015-2018
Use VIN-specific GDS programming, VIN registration, immobilizer sync, idle/throttle relearn, and readiness checks as required.
Alignment, steering, or suspension repair 1
2015-2018
Run steering-angle zero-point, ESC checks, and ADAS recalibration only when required by the VIN-specific Hyundai repair procedure.
Year-by-year details
| Year | VIN split | Trim notes |
|---|---|---|
| 2013 | VIN pos 4-8 identifies model/trim/engine/restraint. Hyundai WMI: 5NP, KMH, 5NM. Position 4-5 = model. Position 10 = model year code. | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. |
| 2014 | VIN pos 4-8 identifies model/trim/engine/restraint. Hyundai WMI: 5NP, KMH, 5NM. Position 4-5 = model. Position 10 = model year code. | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. |
| 2015 | VIN pos 4-8 identifies model/trim/engine/restraint. Hyundai WMI: 5NP, KMH, 5NM. Position 4-5 = model. Position 10 = model year code. | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. |
| 2016 | VIN pos 4-8 identifies model/trim/engine/restraint. Hyundai WMI: 5NP, KMH, 5NM. Position 4-5 = model. Position 10 = model year code. | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. |
| 2017 | VIN pos 4-8 identifies model/trim/engine/restraint. Hyundai WMI: 5NP, KMH, 5NM. Position 4-5 = model. Position 10 = model year code. | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. |
| 2018 | VIN pos 4-8 identifies model/trim/engine/restraint. Hyundai WMI: 5NP, KMH, 5NM. Position 4-5 = model. Position 10 = model year code. | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. |
11 ADAS systems documented across the 2013-2018 generation. Rows that apply to only part of the generation carries a year badge.
Filter by year
ADAS CALIBRATION MATRIX
ADAS systems on this vehicle
Hyundai driver-assist equipment varies by trim, package, and build. Verify forward camera, radar, blind-spot, and parking-assist equipment by VIN in GDS or Hyundai service information before calibration.
Scroll for part numbers and Details
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Rear View Camera 2013-2014 | Rear Camera | Camera | None | YES | - | |
| Blind Spot Monitoring 2013-2014 | Radar | ADAS | Static | Conditional | - | |
| Forward Collision Warning / AEB 2013-2014 | Camera | ADAS | Static | Conditional | - | |
| Lane Departure Warning 2013-2014 | Camera | ADAS | Static | Conditional | - | |
| Hyundai ADAS equipment - VIN-specific 2015-2017 | Camera/radar/blind-spot as equipped | ADAS | Static or dynamic as specified by Hyundai service information | YES | - | |
| Forward Collision-Avoidance Assist (FCA) - Front Camera 2018 | Forward Camera | Camera | Static | YES | - | |
| Forward Radar (77GHz) 2018 | Front Radar | Radar | Static | YES | - | |
| Blind Spot Detection (BSD) - Left Rear Radar 2018 | Side Radar | Radar | Static + Dynamic | YES | - | |
| Blind Spot Detection (BSD) - Right Rear Radar 2018 | Side Radar | Radar | Static + Dynamic | YES | - | |
| Rear View Camera (RVC) 2018 | Rear Camera | Camera | Static | YES | - | |
| Park Distance Control (PDC) - Ultrasonic 2018 | Ultrasonic | Ultrasonic | None | YES | - |
ADAS SYSTEM
YES Supported
Identification
- System type
- Module category
- Sensor location
Part Numbers
- OEM
- Alternative
Calibration & Triggers
- Calibration type
- Programming approach
- Requires PMI
- Trigger events
Technical Notes
- Chip / MCU
- Service notes
Need this calibrated?
Get a quote for ADAS calibration WHEN IS CALIBRATION REQUIRED?
Triggers for ADAS recalibration
ECM Replacement 2013-2014
GDS Mobile IMMO registration + throttle position learn.
ABS/HECU Replacement 2013-2014
GDS Mobile bleed + WSS relearn.
Windshield or forward camera service - if equipped 2015-2018
Verify equipped ADAS by VIN. If a forward camera is present, use the Hyundai service information and GDS calibration routine for the exact model year, trim, and build.
Radar, blind-spot, or parking sensor service - if equipped 2015-2018
Run GDS initialization or aiming when required by Hyundai service information after sensor, bracket, bumper, or structural repair.
ABS/ESC or HECU replacement 2015-2018
Perform GDS setup, brake bleed, SAS/ESC relearn, and DTC-free road test as specified.
BCM, Smart Key ECU, or RKE module replacement 2015-2018
Use GDS variant coding and Hyundai security authorization where required. Verify all customer keys and option functions after service.
ECM/PCM replacement 2015-2018
Use VIN-specific GDS programming, VIN registration, immobilizer sync, idle/throttle relearn, and readiness checks as required.
Alignment, steering, or suspension repair 2015-2018
Run steering-angle zero-point, ESC checks, and ADAS recalibration only when required by the VIN-specific Hyundai repair procedure.
ECU and TCU access paths by engine
Available access data covers 2 ECU or TCU families across 5 engine rows. Final service is still confirmed by VIN, module label, and installed software.
Shown access methods: OBD, BENCH, BOOT.
EDC17C53
Bosch - ECU / PCM
View 1 engine record
EDC17C53
Bosch - ECU / PCM
-
2013-20162.0L 16v CRDi 4WD (D4HA) - 150 PS - Diesel
EDC17CP14
Bosch - ECU / PCM
View 4 engine records
EDC17CP14
Bosch - ECU / PCM
-
2013-20162.2L 16v CRDi 2WD (D4HB) - 197 PS - Diesel -
2013-20162.2L CRDi 16v (D4HB) - 197 PS - Diesel -
2013-20162.2L CRDi 4WD (D4HB) - 197 PS - Diesel -
2013-20162.2L TCI-R (D4HB) - 197 PS - Diesel
7 gateway, immobilizer, and security items documented across the 2013-2018 generation.
ARCHITECTURE & CONNECTIVITY
Architecture & Connectivity
- Body Construction
- Unibody construction; DM/NC-generation Santa Fe/Santa Fe Sport body structure. Verify body length and trim by VIN.
- OBD Protocol
- ISO 15765-4 CAN (500 kbps)
- CAN Architecture
- Hyundai CAN architecture for DM/NC-generation Santa Fe/Santa Fe Sport; OBD-II DLC ISO 15765-4 CAN. Verify exact network topology by VIN in Hyundai service information.
- Infotainment
- Factory Santa Fe audio, navigation, Blue Link, telematics, and cluster-display equipment varies by trim, package, and build date. Verify the exact head unit, display, telematics module, and cluster option by VIN in GDS or the Hyundai parts catalog.
- OTA Capable
- No
- ECU/TCM Unlocking
- Contact us
- ECU/TCM Flashing
- Available
Reviewed coverage: 2013, 2014, 2015, 2016, 2018 - 1.6 T-GDI hybrid, 1.6L T-GDi 16v FHEV (G4FT), 2.0 T-GDI, 2.0L 16v CRDi 4WD (D4HA), 2.0L T-GDi 16v (G4KH), 2.2L 16v CRDi 2WD (D4HB), 2.2L CRDi 16v (D4HB), 2.2L CRDi 4WD (D4HB), 2.2L TCI-R (D4HB), 2.4L 16v 4WD (G4KE), 2.4L MPi 16v (G4KE).
Confirm the exact engine, ECU, and any prerequisite access method before service.
Confirmation is limited to reviewed year/engine rows; other variants require confirmation.
WHAT WE RESOLVE
3rd Gen DM (2013-2018) common module and ADAS issues
- ADAS calibration drift Watch for calibration needs after windshield, bumper, suspension, camera, or radar work. Documented systems include Rear View Camera (2013-2014), Blind Spot Monitoring (2013-2014), Forward Collision Warning / AEB (2013-2014), and Lane Departure Warning (2013-2014). Year-marked systems apply only to the shown range.
- SRS crash-data and warning light SRS service can involve SRS Control Module (SRSCM) and SRS Control Module (SRSCM) (2013-2015). Part numbers and crash-data workflow are confirmed for the exact year/VIN.
- Replacement module setup ECU/PCM replacement programming, BCM configuration, TCU/TCM cloning, ABS/EBCM setup are represented in the merged generation data. Rows with year ranges do not apply to every model year; verify by VIN.
FREQUENTLY ASKED QUESTIONS
FAQ
Can you program Hyundai Santa Fe (2013-2018) modules?
Yes. Core Auto Logic supports generation-scoped module programming for the Hyundai Santa Fe (2013-2018). The merged generation data includes ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS coverage. Rows marked with a year range apply only to that part of the span; unmarked rows are present across the merged generation data.
Which modules are documented for Hyundai Santa Fe (2013-2018)?
The Hyundai Santa Fe (2013-2018) generation currently shows 42 core module records across ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS groups. SRS modules include SRS Control Module (SRSCM) and SRS Control Module (SRSCM) (2013-2015). Part numbers and module variants must be confirmed for your exact year/VIN. Reference part number: 84530-B8500 - confirm for your exact year/VIN.
Does Hyundai Santa Fe (2013-2018) need ADAS calibration after glass or collision work?
The merged generation data documents 11 ADAS systems, including Rear View Camera (2013-2014), Blind Spot Monitoring (2013-2014), Forward Collision Warning / AEB (2013-2014), Lane Departure Warning (2013-2014), and Hyundai ADAS equipment - VIN-specific (2015-2017). Calibration triggers include ECM Replacement (2013-2014), ABS/HECU Replacement (2013-2014), Windshield or forward camera service - if equipped (2015-2018), and Radar, blind-spot, or parking sensor service - if equipped (2015-2018). Procedure type is VIN-specific scan-tool procedure; verify exact requirements by VIN before setup.
Can you reset the airbag module on Hyundai Santa Fe (2013-2018)?
Yes. The generation data includes 23 SRS records, including SRS Control Module (SRSCM) and SRS Control Module (SRSCM) (2013-2015). Bench reset, cloning, and replacement setup are handled after part-number review. Any SRS part number shown for this generation is planning data only - confirm for your exact year/VIN. Reference part number: 84530-B8500 - confirm for your exact year/VIN.
Do all Hyundai Santa Fe (2013-2018) years use the same parts?
No assumption should be made across the full span. The generation page merges rows across 2013-2018; any row that does not span all data-bearing years is printed with its year range or treated as varies by year - verify by VIN. Part numbers always require exact year/VIN confirmation before ordering, cloning, or programming.
How long does service take for Hyundai Santa Fe (2013-2018)?
Most programming, cloning, SRS, and calibration jobs are quoted after VIN, DTC, part number, and repair-scope review. Labor time varies by year - verify by VIN before scheduling. Mail-in module service is available nationwide. Exact service eligibility is confirmed from the year, VIN, module, and requested scope.
Is Hyundai Santa Fe (2013-2018) service mobile or mail-in?
Mobile service covers DFW on-vehicle diagnostics, post-repair coding, and supported module work. Mail-in module service is available nationwide. We confirm the active path for your exact year, VIN, module, and requested scope before service.
More Santa Fe generations
Finish the repair
Need help finishing this repair?
Get onsite help in Dallas-Fort Worth. Ask about same-day availability or a one-time remote session for eligible non-VSP work.
Factory programming software Explore one-time factory coding and programming. We confirm the software and procedure for your vehicle. Module programming & recovery Replacing a module or dealing with a failed programming attempt? Send the part numbers and fault scan for review. Onsite tools & equipment Bring in a technician or ask about hourly, daily and weekly rentals where licensing and equipment availability allow.