VIN / Build Split
VIN pos 4-8 identifies model/trim/engine/restraint. Genesis WMI: KMT. Position 4-5 = model. Position 10 = model year code.
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
DFW Mobile Service
DFW Serving Dallas / Fort Worth
2020 Genesis G80 Supported Services
2020 Genesis G80
ADAS calibration, module programming, and security relearns
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Technical snapshot
- Platform RG (Genesis G80 3rd generation - pre-2021 redesign)
- CAN Architecture Hyundai/Genesis CAN bus (HS-CAN, MS-CAN, LIN for body subsystems)
- Security Genesis IMMO4 - pin extraction available via GDS2 dealer auth; AKL supported
What do you need fixed?
Choose a service to start your quote.
OVERVIEW
Expert ADAS calibration, module programming, and diagnostic recovery for the 2020 Genesis G80. On this vehicle we cover documented systems include Forward Collision-Avoidance Assist (FCA) - Forward Camera, Forward Radar (77GHz), and Blind Spot Detection (BSD) - Rear Radar, this RG (Genesis G80 3rd generation - pre-2021 redesign) platform vehicle, IMMO4 immobilizer support, Genesis Connected Services infotainment programming. Mobile across the DFW Metroplex; mail-in module service is available nationwide.
Platform
RG (Genesis G80 3rd generation - pre-2021 redesign)
Production
2017-present
Trim Levels
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Drivetrain
RWD / AWD
Engine
-
CAN Speed
Hyundai/Genesis CAN bus (HS-CAN, MS-CAN, LIN for body subsystems)
YEAR-SPECIFIC NOTES
Infotainment
Genesis Connected Services
Exact-year service summary for 2020 Genesis G80
ADAS coverage
This 2020 Genesis G80 page documents 5 ADAS systems, including Forward Collision-Avoidance Assist (FCA) - Forward Camera, Forward Radar (77GHz), Blind Spot Detection (BSD) - Rear Radar, and Lane Keeping Assist (LKA) - Forward Camera (shared).
View ADAS dataCalibration triggers
Documented calibration triggers include Windshield Replacement, Front Bumper Repair, Rear Bumper Repair, and Mirror Replacement. Use the ADAS tab for the full trigger list.
View triggersProgrammable modules
This page indexes 22 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and IPC coverage.
View modulesGateway and security
This page includes 2 gateway, immobilizer, or key-security records for this 2020 Genesis G80.
View securityCore Auto Logic capability
Core Auto Logic supports exact-year diagnostics, ADAS calibration, module programming, and security-access planning for the 2020 Genesis G80 using the documented systems and module data on this page.
Choose a sectionWhat changes on this exact year
Feature availability
Genesis SmartSense: Forward Collision Alert, Lane Keeping Assist, Driver Attenti - Available; Platform: RG (Genesis G80 3rd generation - Confirmed
Driver-assist suite
Genesis SmartSense: Forward Collision Alert, Lane Keeping Assist, Driver Attention Warning, Blind Spot Detection, Smart Cruise Control, Rear Cross-Traffic Alert, Around View Monitor (premium trims)
VIN and build split
VIN pos 4-8 identifies model/trim/engine/restraint. Genesis WMI: KMT. Position 4-5 = model. Position 10 = model year code.
Infotainment context
Genesis Connected Services; Genesis Connected Services AVN; 9.2-inch display; Apple CarPlay / Android Auto
Network and access
CAN: Hyundai/Genesis CAN bus (HS-CAN, MS-CAN, LIN for body subsystems)
Tool access for this exact year
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
Factory scan, coding, and calibration access
Hyundai GDS Mobile / Hyundai KDS
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
ADAS scan, setup, and verification
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Bench cloning and chip-level recovery
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Choose a section to view data
SUPPORTED SYSTEMS
What we service on this vehicle
Documented module coverage for the 2020 Genesis G80. Counts reflect modules our techs have programmed or calibrated on this exact platform.
ADAS Calibration
5 modules documented
Forward camera, radar, surround-view and lane-keep recalibration after windshield, suspension or fascia work.
Open ADAS tabEngine / ECU Programming
2 modules documented
Powertrain reprogramming, calibration updates, replacement ECU configuration and security access.
Open Modules tabBCM / Body Programming
1 module documented
Body control module, gateway and accessory programming. Includes feature-bit reconfiguration.
Open Modules tabTCU / Transmission
2 modules documented
Transmission control module reprogramming, adaptive learning reset and replacement TCM clone.
Open Modules tabSRS / Airbag Reset
10 modules documented
Crash-data clear, hard-code reset and replacement airbag module configuration.
Open Modules tabABS / Brake Module
1 module documented
ABS / EBCM bleed support, replacement module coding and yaw-rate sensor calibration.
Open Modules tabIPC, SAS & Other Modules
3 modules documented
Instrument cluster cloning, steering angle sensor calibration and other supporting modules.
Open Modules tabConnectivity & Accessories
3 modules documented
Infotainment radio, surround view, remote start, trailer brake controller and other equipped systems.
Open Modules tabRecalibration Triggers
9 modules documented
Service events that require ADAS recalibration on this vehicle. Tap to see what triggers what.
Open ADAS tabNeed something not listed? Most undocumented modules can still be programmed.
Get a QuoteFeature availability 2
Genesis SmartSense: Forward Collision Alert, Lane Keeping Assist, Driver Attenti
AvailableCalibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.
Platform: RG (Genesis G80 3rd generation
ConfirmedVerify platform code matches when cross-referencing part numbers across model years.
WHAT WE RESOLVE
Common issues on this vehicle
Common Genesis G80 issues we resolve on this platform: Forward Collision-Avoidance Assist (FCA) - Forward Camera, Forward Radar (77GHz), Blind Spot Detection (BSD) - Rear Radar, and Lane Keeping Assist (LKA) - Forward Camera (shared) recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - RG (Genesis G80 3rd generation - pre-2021 redesign) platform uses Hyundai/Genesis CAN bus (HS-CAN, MS-CAN, LIN for body subsystems).
ADAS CALIBRATION MATRIX
ADAS systems on this vehicle
Genesis SmartSense: Forward Collision Alert, Lane Keeping Assist, Driver Attention Warning, Blind Spot Detection, Smart Cruise Control, Rear Cross-Traffic Alert, Around View Monitor (premium trims)
Scroll for part numbers and Details
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Forward Collision-Avoidance Assist (FCA) - Forward Camera | Forward Camera | Camera | Static | YES | ~99210-B1100 (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Forward Radar (77GHz) | Front Radar | Radar | Static | YES | ~99110-B1100 (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Blind Spot Detection (BSD) - Rear Radar | Side Radar | Radar | Static + Dynamic | YES | ~99140-B1000 (L), 99150-B1000 (R) (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Lane Keeping Assist (LKA) - Forward Camera (shared) | Forward Camera | Camera | Static | YES | - | |
| Around View Monitor (AVM) - Surround View | Forward Camera | Camera | Static | YES | ~95760-B1 (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) |
ADAS SYSTEM
YES Supported
Identification
- System type
- Module category
- Sensor location
Part Numbers
- OEM
- Alternative
Calibration & Triggers
- Calibration type
- Programming approach
- Requires PMI
- Trigger events
Technical Notes
- Chip / MCU
- Service notes
Need this calibrated?
Get a quote for ADAS calibration WHEN IS CALIBRATION REQUIRED?
Triggers for ADAS recalibration
Windshield Replacement Affected: FCA Forward Camera, Lane Keeping Assist, AEB
GDS2 ADAS static calibration required. Level surface, calibration target at approx. 2.5m. OEM-equivalent glass only. Verify all SmartSense DTCs clear post-calibration.
Front Bumper Repair Affected: Front Radar (Smart Cruise, AEB), Front Park Sensors
GDS2 radar alignment after front bumper work. Vehicle at curb weight. Inspect mounting bracket.
Rear Bumper Repair Affected: BSD Rear Radars, Rear Park Sensors
GDS2 BSD initialization. Functional test required. Rear park sensor adaptation via GDS2 if replaced.
Mirror Replacement Affected: AVM Side Cameras (L/R)
GDS2 AVM calibration if mirror assembly with integrated camera was replaced. Calibration mat procedure.
Any Collision Affected: ACM, Forward Camera, Front Radar, BSD Radars, all deployed airbags
Full GDS2 scan. ACM crash clear or replace. All ADAS sensors inspect and recalibrate. Verify knee airbag and curtain bag squib connectors after front interior work.
Any Module Replacement Affected: BCM, ECM, ACM, ABS, AVN, Cluster
GDS2 VIN coding and IMMO4 adaptation for all security-relevant modules. Battery SOC >80% before programming.
Forward Camera Replacement
Camera module replacement requires full recalibration using GDS Mobile.
Forward Radar Replacement
Radar module replacement requires alignment/calibration using GDS Mobile.
BSM Sensor Replacement
Blind spot monitoring sensor replacement requires calibration using GDS Mobile.
SRS Modules
SRS Control Module (SRSCM) 10 records
Under center console
- Part number
- 84530-B1500
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
Under center console
- Part number
- 11251-08201
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
Under center console
- Part number
- 11254-06201
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
Under center console
- Part number
- 85010-B1300
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
Under center console
- Part number
- 85020-B1300
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
Under center console
- Part number
- 56900-B1200-RRY
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
Under center console
- Part number
- 56900-B1200-RNB
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
Under center console
- Part number
- 56900-B1450-RNB
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
Under center console
- Part number
- 56900-B1450-RRY
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
Under center console
- Part number
- 13395-08001
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
ECU Modules
ECM - 3.3T Lambda II V6 Bi-Turbo (365hp) ~39130-3L (VERIFY VIA GDS2 VIN)
- Part number
- ~39130-3L (VERIFY VIA GDS2 VIN)
- Protocol / method
- OBD Programming Port
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Bosch MED17.9.8
- Notes
- GDS2 + Programming Port required. IMMO4 adaptation after ECM replacement. Battery SOC >80% before programming. Throttle body adaptation required post-programming.
ECM - 5.0L Tau V8 NA (420hp, 2019-2020 only) ~39130-3C (VERIFY VIA GDS2 VIN)
- Part number
- ~39130-3C (VERIFY VIA GDS2 VIN)
- Protocol / method
- OBD Programming Port
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Bosch MED17
- Notes
- GDS2 + Programming Port. IMMO4 adaptation. Tau V8 was discontinued on G80 after 2020 - verify engine code via VIN before ordering. Not interchangeable with 3.3T ECM.
BCM Modules
Body Control Module (BCM) ~95400-B1 (VERIFY VIA GDS2 VIN)
- Part number
- ~95400-B1 (VERIFY VIA GDS2 VIN)
- Security
- immo4
- Coding required
- Yes
- Cloning supported
- Yes
- Notes
- GDS2 VIN coding and IMMO4 adaptation required. Clone supported with Autel IM608 Pro or Launch Tech+. BCM manages IMMO gateway, central locking, windows, and mirrors. Battery disconnect before removal.
TCU / TCM Transmission Modules
TCU - 8G8HP70 8-Speed Auto 95440-G9
- Part number
- 95440-G9
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Continental TC1797
- Notes
- ZF 8HP transmission, requires VIN coding and adaptation, SP-IV ATF spec, shift relearn procedure required
TCU - A8LR1 8-Speed Auto 95440-G9
- Part number
- 95440-G9
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Bosch TC1797
- Notes
- Hyundai A8LR1 transmission, requires VIN coding and variant selection, SP-IV ATF spec, learning drive cycle needed
ABS / Brake Modules
ABS/ESC Module (Mando / Continental) ~58920-B1 (VERIFY VIA GDS2 VIN)
- Part number
- ~58920-B1 (VERIFY VIA GDS2 VIN)
- Cloning supported
- Yes
- Notes
- GDS2 adaptation and automated bleed after replacement. Steering angle sensor recalibration required via GDS2. DTC C1604 common if bleed incomplete.
Other Modules (IPC, SAS)
Instrument Panel Cluster (IPC) 94013-B1010
- Part number
- 94013-B1010
- Cloning supported
- Yes
- Notes
- RG G80 3rd gen pre-redesign IPC 12.3" digital cluster
Instrument Panel Cluster (IPC) 94013-B1020
- Part number
- 94013-B1020
- Cloning supported
- Yes
- Notes
- RG G80 IPC analog-digital combo base
Connectivity & Accessories
AVN Head Unit - 9.2-inch (Genesis Connected Services) ~96560-B1 (VERIFY VIA GDS2 VIN)
- Part number
- ~96560-B1 (VERIFY VIA GDS2 VIN)
- Notes
- GDS2 coding required after replacement. 9.2-inch display standard on 2019-2020 G80.
Digital Instrument Cluster ~94013-B1 (VERIFY VIA GDS2 VIN)
- Part number
- ~94013-B1 (VERIFY VIA GDS2 VIN)
- Notes
- GDS2 VIN coding required. Mileage stored in cluster.
Around View Monitor Controller ~95760-B1 (VERIFY VIA GDS2)
- Part number
- ~95760-B1 (VERIFY VIA GDS2)
- Notes
- GDS2 AVM calibration after controller replacement. Calibration mat required.
ARCHITECTURE & CONNECTIVITY
Architecture & Connectivity
- Body Construction
- Steel unibody; high-strength steel front and rear subframes
- OBD Protocol
- ISO 15765-4 CAN (500 kbps); UDS (ISO 14229)
- CAN Architecture
- Hyundai/Genesis CAN bus (HS-CAN, MS-CAN, LIN for body subsystems)
- Infotainment
- Genesis Connected Services AVN; 9.2-inch display; Apple CarPlay / Android Auto
- OTA Capable
- No
- Infotainment Name
- Genesis Connected Services
- ECU/TCM Unlocking
- Contact us
- ECU/TCM Flashing
- Contact us
OPENPILOT / COMMA.AI
Openpilot Compatibility
Not Supported
Officially supported (openpilot master)
- Package
- SCC + LFA / HDA II
- Hardware
- Comma 3X + Hyundai J/H/P harness
- Harness
- Hyundai J/H/P Harness
2024 2.5T Advanced uses HDA II / Can-FD via Hyundai P harness.
FREQUENTLY ASKED QUESTIONS
FAQ
How much does ADAS calibration cost for a 2020 Genesis G80?
ADAS calibration pricing for a 2020 Genesis G80 depends on which of its 5 documented systems need work after a repair. This vehicle is documented with Forward Collision-Avoidance Assist (FCA) - Forward Camera, Forward Radar (77GHz), Blind Spot Detection (BSD) - Rear Radar, Lane Keeping Assist (LKA) - Forward Camera (shared), and Around View Monitor (AVM) - Surround View. We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.
Can you reset the airbag light on a 2020 Genesis G80?
Yes. The 2020 Genesis G80 uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: 84530-B1500. Mobile diagnosis and programming are available in DFW, and mail-in module service is available nationwide. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.
What is needed after replacing the windshield on a 2020 Genesis G80?
After windshield replacement on a 2020 Genesis G80, Forward Collision-Avoidance Assist (FCA) - Forward Camera, Forward Radar (77GHz), and Lane Keeping Assist (LKA) - Forward Camera (shared) rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in module service is available nationwide for eligible module work.
How long does a 2020 Genesis G80 module service take?
Most 2020 Genesis G80 onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 13 programmable modules documented in our database (2 ECU, 1 BCM, 2 TCU, 1 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module service is available nationwide.
Do you cover the 2020 Genesis G80 on-site, or is this mail-in only?
We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, post-repair recoding, and supported module work). Mail-in module service is available nationwide. Quote the work and we will confirm the active service path for the 2020 Genesis G80. Do not ship a module unless support confirms next steps.
What kind of warranty do you offer on 2020 Genesis G80 programming?
Every programming, cloning, and calibration job on the 2020 Genesis G80 is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
Which modules on a 2020 Genesis G80 can you actually service?
We program, clone, repair, or replace the full programmable-module stack on a 2020 Genesis G80. For this vehicle our database documents:
- 2 engine control (ECU/PCM)
- 2 transmission control (TCU/TCM)
- 1 body control (BCM and related)
- 1 ABS / brake control (EBCM)
- 1 immobilizer / security
- 1 key & fob
- 2 instrument cluster (IPC)
- 1 steering angle sensor (SAS)
- 5 ADAS module
Infotainment on this platform: Genesis Connected Services. Send the VIN and the operations performed and we will confirm support and pricing.
Additional Module Part Numbers
Additional OEM-sourced part numbers for the 2020 Genesis G80 covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.
- ADAS Module Part Numbers
- 2020 DH GEN PREDATES RG3 SMARTSENSE SUITE, CAMERA HARDWARE DIFFERENT FROM 2021
- ECU / PCM Part Numbers
- 39110-3FEN2, 39110-3FDN0, 3.8L LAMBDA II
- BCM / Body Module Part Numbers
- ~95400-B1 (VERIFY VIA GDS2 VIN)
- TCU / TCM Part Numbers
- 95440-G9
- SRS / Airbag Module Part Numbers
- 84530-B1500, 11251-08201, 11254-06201, 85010-B1300, 85020-B1300, 56900-B1200-RRY, 56900-B1200-RNB, 56900-B1450-RNB, 56900-B1450-RRY, 13395-08001
- ABS / EBCM Part Numbers
- 58920-T1, CONTINENTAL ESC (G80 RG 3RD GEN PRE-REDESIGN)
- Instrument Cluster (IPC) Part Numbers
- 94013-B1010, 94013-B1020
- Transmission Control Module (TCM) Part Numbers
- 95440-G9
Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.
Different trim or build?
Send your VIN and we'll confirm exact module support and pricing in the quote response.
Hit a security wall? We've got the keys.
1-year unlimited warranty on every flash and calibration.
Shared module fitment
Vehicles sharing modules with the 2020 Genesis G80
These vehicles use one or more of the same replacement modules indexed for this vehicle.
Finish the repair
Need help finishing this repair?
Get onsite help in Dallas-Fort Worth. Ask about same-day availability or a one-time remote session for eligible non-VSP work.
Factory programming software Explore one-time factory coding and programming. We confirm the software and procedure for your vehicle. Module programming & recovery Replacing a module or dealing with a failed programming attempt? Send the part numbers and fault scan for review. Onsite tools & equipment Bring in a technician or ask about hourly, daily and weekly rentals where licensing and equipment availability allow.