Genesis Advanced Safety Level 2: Forward Collision Alert, Lane Keeping Assist, H
AvailableCalibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
Same-Day Mobile Service
DFW Serving Dallas / Fort Worth
2017-2020 Genesis G80 Generation Guide
Genesis G80 1st Gen (2017-2020) ADAS Calibration & Module Programming
Covers model years 2017-2020 - one service guide for the whole generation.
Full ADAS calibration, module programming, and key security work for every Genesis G80 built on this platform. Same-day mobile service across the Dallas/Fort Worth metroplex; mail-in accepted nationwide.
- Platform RG (Genesis G80 3rd generation - pre-2021 redesign)
- CAN Architecture Hyundai/Genesis CAN bus (HS-CAN, MS-CAN, LIN for body subsystems)
- Security Genesis IMMO4 - pin extraction available via GDS2 dealer auth; AKL supported
The ADAS, module, and security rows below are consolidated across the full 2017-2020 generation. A year badge marks rows that apply only to part of the span; rows without a badge apply to every year. Year-specific differences are summarized under “What changes across 2017-2020”.
OVERVIEW
Expert ADAS calibration, module programming, and diagnostic recovery for the 2020 Genesis G80. On this vehicle we cover documented systems include Forward Collision-Avoidance Assist (FCA) - Forward Camera, Forward Radar (77GHz), and Blind Spot Detection (BSD) - Rear Radar, this RG (Genesis G80 3rd generation - pre-2021 redesign) platform vehicle, IMMO4 immobilizer support, Genesis Connected Services infotainment programming. Mobile across the DFW Metroplex, mail-in nationwide for module-bench work.
Platform
RG (Genesis G80 3rd generation - pre-2021 redesign)
Production
2017-present
Trim Levels
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Drivetrain
RWD / AWD
Engine
-
CAN Speed
Hyundai/Genesis CAN bus (HS-CAN, MS-CAN, LIN for body subsystems)
Feature availability 4
Immobilizer: SMARTRA / Smart Key
StandardKey programming requires manufacturer-level tool access. Add key supported. All keys lost (AKL) supported.
Platform: RG3 (Genesis G80 3rd Generation)
ConfirmedVerify platform code matches when cross-referencing part numbers across model years.
Genesis SmartSense: Forward Collision Alert, Lane Keeping Assist, Driver Attenti
AvailableCalibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.
Tool access for this exact year
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
Factory scan, coding, and calibration access
Hyundai GDS Mobile / Hyundai KDS
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
OEM subscription required
Make-level OEM tool map plus exact-year gateway and ADAS fields.
ADAS scan, setup, and verification
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Tool subscription required
Service-level scanner-vendor source packet plus exact-year ADAS records.
Bench cloning and chip-level recovery
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Bench programmer source packet plus exact-year module/security records.
Know this platform
This platform uses Hyundai/Genesis CAN bus (HS-CAN, MS-CAN, LIN for body subsystems) with ISO 15765-4 CAN (500 kbps); UDS (ISO 14229).
- CAN
- Hyundai/Genesis CAN bus (HS-CAN, MS-CAN, LIN for body subsystems)
- OBD
- ISO 15765-4 CAN (500 kbps); UDS (ISO 14229)
can_architecture obd_protocol
OPENPILOT / COMMA.AI
Openpilot Compatibility
Not Supported
Officially supported (openpilot master)
- Package
- SCC + LFA / HDA II
- Hardware
- Comma 3X + Hyundai J/H/P harness
- Harness
- Hyundai J/H/P Harness
2024 2.5T Advanced uses HDA II / Can-FD via Hyundai P harness.
Generation service summary for Genesis G80 1st Gen (2017-2020)
Generation coverage
This page consolidates Genesis G80 service data for 2017-2020 across 4 model years; 4 years have merged CCT data.
Choose a yearADAS coverage
Merged ADAS coverage includes 17 system records, including Forward Collision-Avoidance Assist (FCA) - Front Camera (2017), Forward Radar (77GHz) (2017), Highway Driving Assist (HDA) (2017), and Blind Spot Detection (BSD) - Left Rear Radar (2017). Year-marked systems apply only to the shown range.
View ADAS dataCalibration triggers
This generation has 18 merged calibration trigger records. Trigger applicability can vary by year - verify by VIN before setup.
View triggersProgrammable modules
The merged generation page indexes 35 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, IPC coverage. Part numbers are confirmed for the exact year/VIN.
View modulesGateway and security
Gateway, immobilizer, and key-security coverage includes 5 merged records. Security procedures vary by year - verify by VIN.
View securityCore Auto Logic capability
Core Auto Logic supports generation-level diagnostics, ADAS calibration, module programming, security-access planning, and mail-in bench work for the Genesis G80 2017-2020 span, with exact-year validation before service.
Get a quoteDo I need calibration?
Windshield Replacement 7
FCA Camera
2017-2018required
GDS2 static calibration. OEM glass. Target at approx. 2.5m.
LKA
2017-2018required
GDS2 static calibration. OEM glass. Target at approx. 2.5m.
HDA/HDA 2
2017-2018required
GDS2 static calibration. OEM glass. Target at approx. 2.5m.
AEB
2017-2018required
GDS2 static calibration. OEM glass. Target at approx. 2.5m.
FCA Forward Camera
2019-2020required
GDS2 ADAS static calibration required. Level surface, calibration target at approx. 2.5m. OEM-equivalent glass only. Verify all SmartSense DTCs clear post-calibration.
Lane Keeping Assist
2019-2020required
GDS2 ADAS static calibration required. Level surface, calibration target at approx. 2.5m. OEM-equivalent glass only. Verify all SmartSense DTCs clear post-calibration.
AEB
2019-2020required
GDS2 ADAS static calibration required. Level surface, calibration target at approx. 2.5m. OEM-equivalent glass only. Verify all SmartSense DTCs clear post-calibration.
Front Bumper Repair or Replacement 3
Front Radar
2017-2018required
GDS2 radar alignment.
Smart Cruise
2017-2018required
GDS2 radar alignment.
AEB
2017-2018required
GDS2 radar alignment.
Rear Bumper Repair or Replacement 2
BSD Radars
2017-2018required
GDS2 BSD initialization. Functional test.
RCCA
2017-2018required
GDS2 BSD initialization. Functional test.
Any Collision 7
ACM
2017-2018required
Full GDS2 scan. ACM clear or replace. Recalibrate ADAS. Dealer auth for IMMO5.
all ADAS
2017-2018required
Full GDS2 scan. ACM clear or replace. Recalibrate ADAS. Dealer auth for IMMO5.
ACM
2019-2020required
Full GDS2 scan. ACM crash clear or replace. All ADAS sensors inspect and recalibrate. Verify knee airbag and curtain bag squib connectors after front interior work.
Forward Camera
2019-2020required
Full GDS2 scan. ACM crash clear or replace. All ADAS sensors inspect and recalibrate. Verify knee airbag and curtain bag squib connectors after front interior work.
Front Radar
2019-2020required
Full GDS2 scan. ACM crash clear or replace. All ADAS sensors inspect and recalibrate. Verify knee airbag and curtain bag squib connectors after front interior work.
BSD Radars
2019-2020required
Full GDS2 scan. ACM crash clear or replace. All ADAS sensors inspect and recalibrate. Verify knee airbag and curtain bag squib connectors after front interior work.
all deployed airbags
2019-2020required
Full GDS2 scan. ACM crash clear or replace. All ADAS sensors inspect and recalibrate. Verify knee airbag and curtain bag squib connectors after front interior work.
Any Module Replacement 10
BCM
2017-2018required
GDS2 + dealer auth for IMMO5. GDS2 coding for all others.
ECM
2017-2018required
GDS2 + dealer auth for IMMO5. GDS2 coding for all others.
ACM
2017-2018required
GDS2 + dealer auth for IMMO5. GDS2 coding for all others.
ABS
2017-2018required
GDS2 + dealer auth for IMMO5. GDS2 coding for all others.
BCM
2019-2020required
GDS2 VIN coding and IMMO4 adaptation for all security-relevant modules. Battery SOC >80% before programming.
ECM
2019-2020required
GDS2 VIN coding and IMMO4 adaptation for all security-relevant modules. Battery SOC >80% before programming.
ACM
2019-2020required
GDS2 VIN coding and IMMO4 adaptation for all security-relevant modules. Battery SOC >80% before programming.
ABS
2019-2020required
GDS2 VIN coding and IMMO4 adaptation for all security-relevant modules. Battery SOC >80% before programming.
AVN
2019-2020required
GDS2 VIN coding and IMMO4 adaptation for all security-relevant modules. Battery SOC >80% before programming.
Cluster
2019-2020required
GDS2 VIN coding and IMMO4 adaptation for all security-relevant modules. Battery SOC >80% before programming.
Forward Radar Replacement 2
2017-2019
Yes
Radar module replacement requires alignment/calibration using GDS Mobile.
2020
Yes
Radar module replacement requires alignment/calibration using GDS Mobile.
BSM Sensor Replacement 2
2017-2019
Yes
Blind spot monitoring sensor replacement requires calibration using GDS Mobile.
2020
Yes
Blind spot monitoring sensor replacement requires calibration using GDS Mobile.
Mirror Replacement 2
2017-2018
Yes
Surround view mirror camera recalibration required after mirror R&R. Use GDS Mobile.
AVM Side Cameras (L/R)
2019-2020required
GDS2 AVM calibration if mirror assembly with integrated camera was replaced. Calibration mat procedure.
Front Bumper Repair 3
Front Radar (Smart Cruise
2019-2020required
GDS2 radar alignment after front bumper work. Vehicle at curb weight. Inspect mounting bracket.
AEB)
2019-2020required
GDS2 radar alignment after front bumper work. Vehicle at curb weight. Inspect mounting bracket.
Front Park Sensors
2019-2020required
GDS2 radar alignment after front bumper work. Vehicle at curb weight. Inspect mounting bracket.
Rear Bumper Repair 2
BSD Rear Radars
2019-2020required
GDS2 BSD initialization. Functional test required. Rear park sensor adaptation via GDS2 if replaced.
Rear Park Sensors
2019-2020required
GDS2 BSD initialization. Functional test required. Rear park sensor adaptation via GDS2 if replaced.
Forward Camera Replacement 2
2019
Yes
Camera module replacement requires full recalibration using GDS Mobile.
2020
Yes
Camera module replacement requires full recalibration using GDS Mobile.
Year-by-year details
| Year | VIN split | Infotainment | Trim notes |
|---|---|---|---|
| 2017 | VIN pos 4-8 identifies model/trim/engine/restraint. Genesis WMI: KMT. Position 4-5 = model. Position 10 = model year code. | Genesis Connected Services | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. |
| 2018 | VIN pos 4-8 identifies model/trim/engine/restraint. Genesis WMI: KMT. Position 4-5 = model. Position 10 = model year code. | Genesis Connected Services | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. |
| 2019 | VIN pos 4-8 identifies model/trim/engine/restraint. Genesis WMI: KMT. Position 4-5 = model. Position 10 = model year code. | Genesis Connected Services | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. |
| 2020 | VIN pos 4-8 identifies model/trim/engine/restraint. Genesis WMI: KMT. Position 4-5 = model. Position 10 = model year code. | Genesis Connected Services | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. |
17 ADAS systems documented across 2017-2020. Rows that apply to only part of the generation carry a year badge.
Filter by year
ADAS CALIBRATION MATRIX
ADAS systems on this vehicle
Genesis SmartSense: Forward Collision Alert, Lane Keeping Assist, Driver Attention Warning, Blind Spot Detection, Smart Cruise Control, Rear Cross-Traffic Alert, Around View Monitor (premium trims)
Scroll for part numbers and Details
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Forward Collision-Avoidance Assist (FCA) - Front Camera 2017 | Forward Camera | Camera | Static | YES | ~(VERIFY VIA OUR DIAGNOSTIC SOFTWARE)(G80 CODE) | |
| Forward Radar (77GHz) 2017 | Front Radar | Radar | Static | YES | ~(VERIFY VIA OUR DIAGNOSTIC SOFTWARE)(G80 CODE) | |
| Highway Driving Assist (HDA) 2017 | Highway Driving Assist | Camera | Static + Dynamic | YES | - | |
| Blind Spot Detection (BSD) - Left Rear Radar 2017 | Side Radar | Radar | Static + Dynamic | YES | - | |
| Blind Spot Detection (BSD) - Right Rear Radar 2017-2018 | Side Radar | Radar | Static + Dynamic | YES | - | |
| Around View Monitor (AVM) - Surround View 2017 | Surround Camera | Camera | Static | YES | - | |
| Park Distance Control (PDC) - Ultrasonic 2017-2018 | Ultrasonic | Ultrasonic | None | YES | - | |
| Forward Collision-Avoidance Assist (FCA) - Front Camera 2018 | Forward Camera | Camera | Static | YES | ~(VERIFY VIA OUR DIAGNOSTIC SOFTWARE)(G80 CODE) | |
| Forward Radar (77GHz) 2018 | Front Radar | Radar | Static | YES | ~(VERIFY VIA OUR DIAGNOSTIC SOFTWARE)(G80 CODE) | |
| Highway Driving Assist (HDA) 2018 | Highway Driving Assist | Camera | Static + Dynamic | YES | - | |
| Blind Spot Detection (BSD) - Left Rear Radar 2018 | Side Radar | Radar | Static + Dynamic | YES | - | |
| Around View Monitor (AVM) - Surround View 2018 | Surround Camera | Camera | Static | YES | - | |
| Forward Collision-Avoidance Assist (FCA) - Forward Camera 2019-2020 | Forward Camera | Camera | Static | YES | ~99210-B1100 (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Forward Radar (77GHz) 2019-2020 | Front Radar | Radar | Static | YES | ~99110-B1100 (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Blind Spot Detection (BSD) - Rear Radar 2019-2020 | Side Radar | Radar | Static + Dynamic | YES | ~99140-B1000 (L), 99150-B1000 (R) (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Lane Keeping Assist (LKA) - Forward Camera (shared) 2019-2020 | Forward Camera | Camera | Static | YES | - | |
| Around View Monitor (AVM) - Surround View 2019-2020 | Forward Camera | Camera | Static | YES | ~95760-B1 (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) |
ADAS SYSTEM
YES Supported
Identification
- System type
- Module category
- Sensor location
Part Numbers
- OEM
- Alternative
Calibration & Triggers
- Calibration type
- Programming approach
- Requires PMI
- Trigger events
Technical Notes
- Chip / MCU
- Service notes
Need this calibrated?
Get a quote for ADAS calibration WHEN IS CALIBRATION REQUIRED?
Triggers for ADAS recalibration
Windshield Replacement 2017-2018 Affected: FCA Camera, LKA, HDA/HDA 2, AEB
GDS2 static calibration. OEM glass. Target at approx. 2.5m.
Front Bumper Repair or Replacement 2017-2018 Affected: Front Radar, Smart Cruise, AEB
GDS2 radar alignment.
Rear Bumper Repair or Replacement 2017-2018 Affected: BSD Radars, RCCA
GDS2 BSD initialization. Functional test.
Any Collision 2017-2018 Affected: ACM, all ADAS
Full GDS2 scan. ACM clear or replace. Recalibrate ADAS. Dealer auth for IMMO5.
Any Module Replacement 2017-2018 Affected: BCM, ECM, ACM, ABS
GDS2 + dealer auth for IMMO5. GDS2 coding for all others.
Forward Radar Replacement 2017-2019
Radar module replacement requires alignment/calibration using GDS Mobile.
BSM Sensor Replacement 2017-2019
Blind spot monitoring sensor replacement requires calibration using GDS Mobile.
Mirror Replacement 2017-2018
Surround view mirror camera recalibration required after mirror R&R. Use GDS Mobile.
Windshield Replacement 2019-2020 Affected: FCA Forward Camera, Lane Keeping Assist, AEB
GDS2 ADAS static calibration required. Level surface, calibration target at approx. 2.5m. OEM-equivalent glass only. Verify all SmartSense DTCs clear post-calibration.
Front Bumper Repair 2019-2020 Affected: Front Radar (Smart Cruise, AEB), Front Park Sensors
GDS2 radar alignment after front bumper work. Vehicle at curb weight. Inspect mounting bracket.
Rear Bumper Repair 2019-2020 Affected: BSD Rear Radars, Rear Park Sensors
GDS2 BSD initialization. Functional test required. Rear park sensor adaptation via GDS2 if replaced.
Mirror Replacement 2019-2020 Affected: AVM Side Cameras (L/R)
GDS2 AVM calibration if mirror assembly with integrated camera was replaced. Calibration mat procedure.
Any Collision 2019-2020 Affected: ACM, Forward Camera, Front Radar, BSD Radars, all deployed airbags
Full GDS2 scan. ACM crash clear or replace. All ADAS sensors inspect and recalibrate. Verify knee airbag and curtain bag squib connectors after front interior work.
Any Module Replacement 2019-2020 Affected: BCM, ECM, ACM, ABS, AVN, Cluster
GDS2 VIN coding and IMMO4 adaptation for all security-relevant modules. Battery SOC >80% before programming.
Forward Camera Replacement 2019
Camera module replacement requires full recalibration using GDS Mobile.
Forward Camera Replacement 2020
Camera module replacement requires full recalibration using GDS Mobile.
Forward Radar Replacement 2020
Radar module replacement requires alignment/calibration using GDS Mobile.
BSM Sensor Replacement 2020
Blind spot monitoring sensor replacement requires calibration using GDS Mobile.
Modules we program on this generation
35 documented Genesis G80 modules across 2017-2020. Open a group for part numbers, programming protocol, security notes, and clone support.
SRS MODULES
SRS Modules
SRS Control Module (SRSCM) x10
84530-B1500 Verify by VIN Under center console
coding and programming fields are absent or ambiguous
Used/donor module guide
Compatible donor years: 2017, 2018, 2019, 2020
Always match the full part number before buying a used module.
- PART
- 84530-B1500
- LOCATION
- Under center console
- MFG
- Continental
- NOTES
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
11251-08201 Verify by VIN Under center console
coding and programming fields are absent or ambiguous
Used/donor module guide
Compatible donor years: 2017, 2018, 2019, 2020
Always match the full part number before buying a used module.
- PART
- 11251-08201
- LOCATION
- Under center console
- MFG
- Continental
- NOTES
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
11254-06201 Verify by VIN Under center console
coding and programming fields are absent or ambiguous
Used/donor module guide
Compatible donor years: 2017, 2018, 2019, 2020
Always match the full part number before buying a used module.
- PART
- 11254-06201
- LOCATION
- Under center console
- MFG
- Continental
- NOTES
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
85010-B1300 Verify by VIN Under center console
coding and programming fields are absent or ambiguous
Used/donor module guide
Compatible donor years: 2017, 2018, 2019, 2020
Always match the full part number before buying a used module.
- PART
- 85010-B1300
- LOCATION
- Under center console
- MFG
- Continental
- NOTES
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
85020-B1300 Verify by VIN Under center console
coding and programming fields are absent or ambiguous
Used/donor module guide
Compatible donor years: 2017, 2018, 2019, 2020
Always match the full part number before buying a used module.
- PART
- 85020-B1300
- LOCATION
- Under center console
- MFG
- Continental
- NOTES
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
56900-B1200-RRY Verify by VIN Under center console
coding and programming fields are absent or ambiguous
Used/donor module guide
Compatible donor years: 2017, 2018, 2019, 2020
Always match the full part number before buying a used module.
- PART
- 56900-B1200-RRY
- LOCATION
- Under center console
- MFG
- Continental
- NOTES
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
56900-B1200-RNB Verify by VIN Under center console
coding and programming fields are absent or ambiguous
Used/donor module guide
Compatible donor years: 2017, 2018, 2019, 2020
Always match the full part number before buying a used module.
- PART
- 56900-B1200-RNB
- LOCATION
- Under center console
- MFG
- Continental
- NOTES
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
56900-B1450-RNB Verify by VIN Under center console
coding and programming fields are absent or ambiguous
Used/donor module guide
Compatible donor years: 2017, 2018, 2019, 2020
Always match the full part number before buying a used module.
- PART
- 56900-B1450-RNB
- LOCATION
- Under center console
- MFG
- Continental
- NOTES
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
56900-B1450-RRY Verify by VIN Under center console
coding and programming fields are absent or ambiguous
Used/donor module guide
Compatible donor years: 2017, 2018, 2019, 2020
Always match the full part number before buying a used module.
- PART
- 56900-B1450-RRY
- LOCATION
- Under center console
- MFG
- Continental
- NOTES
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
13395-08001 Verify by VIN Under center console
coding and programming fields are absent or ambiguous
Used/donor module guide
Compatible donor years: 2017, 2018, 2019, 2020
Always match the full part number before buying a used module.
- PART
- 13395-08001
- LOCATION
- Under center console
- MFG
- Continental
- NOTES
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
ECU MODULES
ECU Modules
ECM - 2.5T Smartstream G4KH (224hp) Verify by VIN 2017-2018 ~39130-3MN (VERIFY VIA GDS2)
_years covers only 2017-2018 for this generation
Used/donor module guide
Compatible donor years: 2017, 2018
Always match the full part number before buying a used module.
- PART
- ~39130-3MN (VERIFY VIA GDS2)
- PROTOCOL
- OBD Programming Port
- CODING
- Yes
- CLONE
- No
- CHIP/MCU
- Bosch MED17 / Continental
- NOTES
- GDS2 + Programming Port. IMMO5 - dealer auth. Throttle body adaptation.
ECM - 3.5T Lambda III V6 Bi-Turbo (375hp) Verify by VIN 2017-2018 ~39130-3M (VERIFY VIA GDS2)
_years covers only 2017-2018 for this generation
Used/donor module guide
Compatible donor years: 2017, 2018
Always match the full part number before buying a used module.
- PART
- ~39130-3M (VERIFY VIA GDS2)
- PROTOCOL
- OBD Programming Port
- CODING
- Yes
- CLONE
- No
- CHIP/MCU
- Bosch MED17 / Continental
- NOTES
- GDS2 + Programming Port. IMMO5 - dealer auth.
ECM - 3.3T Lambda II V6 Bi-Turbo (365hp) Verify by VIN 2019-2020 ~39130-3L (VERIFY VIA GDS2 VIN)
_years covers only 2019-2020 for this generation
Used/donor module guide
Compatible donor years: 2019, 2020
Donor must match part family ~39130-3L (VERIFY VIA GDS2 VIN) - requires cloning
Always match the full part number before buying a used module.
- PART
- ~39130-3L (VERIFY VIA GDS2 VIN)
- PROTOCOL
- OBD Programming Port
- CODING
- Yes
- CLONE
- Yes
- CHIP/MCU
- Bosch MED17.9.8
- NOTES
- GDS2 + Programming Port required. IMMO4 adaptation after ECM replacement. Battery SOC >80% before programming. Throttle body adaptation required post-programming.
ECM - 5.0L Tau V8 NA (420hp, 2019-2020 only) Verify by VIN 2019-2020 ~39130-3C (VERIFY VIA GDS2 VIN)
_years covers only 2019-2020 for this generation
Used/donor module guide
Compatible donor years: 2019, 2020
Donor must match part family ~39130-3C (VERIFY VIA GDS2 VIN) - requires cloning
Always match the full part number before buying a used module.
- PART
- ~39130-3C (VERIFY VIA GDS2 VIN)
- PROTOCOL
- OBD Programming Port
- CODING
- Yes
- CLONE
- Yes
- CHIP/MCU
- Bosch MED17
- NOTES
- GDS2 + Programming Port. IMMO4 adaptation. Tau V8 was discontinued on G80 after 2020 - verify engine code via VIN before ordering. Not interchangeable with 3.3T ECM.
BCM MODULES
BCM Modules
Body Control Module (BCM) Verify by VIN 2017-2018 ~95400-T1 (VERIFY VIA GDS2)
_years covers only 2017-2018 for this generation
Used/donor module guide
Compatible donor years: 2017, 2018
Always match the full part number before buying a used module.
- PART
- ~95400-T1 (VERIFY VIA GDS2)
- SECURITY
- IMMO5
- CODING
- Yes
- CLONE
- No
- NOTES
- IMMO5 AES-256. GDS2 + Genesis dealer authorization. No aftermarket tool support.
Body Control Module (BCM) Verify by VIN 2019-2020 ~95400-B1 (VERIFY VIA GDS2 VIN)
_years covers only 2019-2020 for this generation
Used/donor module guide
Compatible donor years: 2019, 2020
Donor must match part family ~95400-B1 (VERIFY VIA GDS2 VIN) - requires cloning
Always match the full part number before buying a used module.
- PART
- ~95400-B1 (VERIFY VIA GDS2 VIN)
- SECURITY
- immo4
- CODING
- Yes
- CLONE
- Yes
- NOTES
- GDS2 VIN coding and IMMO4 adaptation required. Clone supported with Autel IM608 Pro or Launch Tech+. BCM manages IMMO gateway, central locking, windows, and mirrors. Battery disconnect before removal.
TCU / TCM TRANSMISSION MODULES
TCU / TCM Transmission Modules
TCU - 8G80 8-Speed Auto Verify by VIN 2017-2018 95440-B1
_years covers only 2017-2018 for this generation
Used/donor module guide
Compatible donor years: 2017, 2018
Donor must match part family 95440-B1 - requires cloning
Always match the full part number before buying a used module.
- PART
- 95440-B1
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- Yes
- CHIP/MCU
- Continental TC1797
- NOTES
- Requires Genesis GDS or compatible J2534 tool for VIN coding. ATF: SP-IV-RR. TCU relearn via test drive 15+ minutes with varied speeds.
TCU - 8G8HP70 8-Speed Auto Verify by VIN 2019-2020 95440-G9
_years covers only 2019-2020 for this generation
Used/donor module guide
Compatible donor years: 2019, 2020
Donor must match part family 95440-G9 - requires cloning
Always match the full part number before buying a used module.
- PART
- 95440-G9
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- Yes
- CHIP/MCU
- Continental TC1797
- NOTES
- ZF 8HP transmission, requires VIN coding and adaptation, SP-IV ATF spec, shift relearn procedure required
TCU - A8LR1 8-Speed Auto Verify by VIN 2019-2020 95440-G9
_years covers only 2019-2020 for this generation
Used/donor module guide
Compatible donor years: 2019, 2020
Donor must match part family 95440-G9 - requires cloning
Always match the full part number before buying a used module.
- PART
- 95440-G9
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- Yes
- CHIP/MCU
- Bosch TC1797
- NOTES
- Hyundai A8LR1 transmission, requires VIN coding and variant selection, SP-IV ATF spec, learning drive cycle needed
ABS / BRAKE MODULES
ABS / Brake Modules
ABS/ESC Module Verify by VIN 2017-2018 ~58920-T1 (VERIFY VIA GDS2)
_years covers only 2017-2018 for this generation
Used/donor module guide
Compatible donor years: 2017, 2018
Always match the full part number before buying a used module.
- PART
- ~58920-T1 (VERIFY VIA GDS2)
- CLONE
- No
- NOTES
- GDS2 adaptation, automated bleed, steering angle sensor recalibration.
ABS/ESC Module (Mando / Continental) Verify by VIN 2019-2020 ~58920-B1 (VERIFY VIA GDS2 VIN)
_years covers only 2019-2020 for this generation
Used/donor module guide
Compatible donor years: 2019, 2020
Donor must match part family ~58920-B1 (VERIFY VIA GDS2 VIN) - requires cloning
Always match the full part number before buying a used module.
- PART
- ~58920-B1 (VERIFY VIA GDS2 VIN)
- CLONE
- Yes
- NOTES
- GDS2 adaptation and automated bleed after replacement. Steering angle sensor recalibration required via GDS2. DTC C1604 common if bleed incomplete.
OTHER MODULES (IPC, SAS)
Other Modules (IPC, SAS)
Instrument Panel Cluster (IPC) x5
94003-B1000 Verify by VIN 2017-2019
_years covers only 2017-2019 for this generation
Used/donor module guide
Compatible donor years: 2017, 2018, 2019
Donor must match part family 94003-B1000 - requires cloning
Always match the full part number before buying a used module.
- PART
- 94003-B1000
- CLONE
- Yes
- NOTES
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
94003-B1010 Verify by VIN 2017-2018
_years covers only 2017-2018 for this generation
Used/donor module guide
Compatible donor years: 2017, 2018
Donor must match part family 94003-B1010 - requires cloning
Always match the full part number before buying a used module.
- PART
- 94003-B1010
- CLONE
- Yes
- NOTES
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
94003-B1050 Verify by VIN 2019
_years covers only 2019 for this generation
Used/donor module guide
Compatible donor years: 2019
Donor must match part family 94003-B1050 - requires cloning
Always match the full part number before buying a used module.
- PART
- 94003-B1050
- CLONE
- Yes
- NOTES
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
94013-B1010 Verify by VIN 2020
_years covers only 2020 for this generation
Used/donor module guide
Compatible donor years: 2020
Donor must match part family 94013-B1010 - requires cloning
Always match the full part number before buying a used module.
- PART
- 94013-B1010
- CLONE
- Yes
- NOTES
- RG G80 3rd gen pre-redesign IPC 12.3" digital cluster
94013-B1020 Verify by VIN 2020
_years covers only 2020 for this generation
Used/donor module guide
Compatible donor years: 2020
Donor must match part family 94013-B1020 - requires cloning
Always match the full part number before buying a used module.
- PART
- 94013-B1020
- CLONE
- Yes
- NOTES
- RG G80 IPC analog-digital combo base
Steering Angle Sensor (SAS) x3
Part 1 Verify by VIN 2017-2019
_years covers only 2017-2019 for this generation
Used/donor module guide
Compatible donor years: 2017, 2018, 2019
Always match the full part number before buying a used module.
- CODING
- Yes
- NOTES
- INTEGRATED (clock spring / steering column module
Part 2 Verify by VIN 2017-2019
_years covers only 2017-2019 for this generation
Used/donor module guide
Compatible donor years: 2017, 2018, 2019
Always match the full part number before buying a used module.
- CODING
- Yes
- NOTES
- cross-year extension)
Part 3 Verify by VIN 2020
_years covers only 2020 for this generation
Used/donor module guide
Compatible donor years: 2020
Always match the full part number before buying a used module.
- CODING
- Yes
- NOTES
- INTEGRATED (SCM)
CONNECTIVITY & ACCESSORIES
Connectivity & Accessories
14.5-inch Infotainment Head Unit Verify by VIN 2017-2018 ~96560-T1
_years covers only 2017-2018 for this generation
Used/donor module guide
Compatible donor years: 2017, 2018
Always match the full part number before buying a used module.
- PART
- ~96560-T1
- NOTES
- GDS2 coding. OTA-capable.
Digital Instrument Cluster Verify by VIN 2017-2018 ~94013-T1
_years covers only 2017-2018 for this generation
Used/donor module guide
Compatible donor years: 2017, 2018
Always match the full part number before buying a used module.
- PART
- ~94013-T1
- NOTES
- GDS2 VIN coding.
Head-Up Display (HUD) Verify by VIN 2017-2018 ~62100-T1
_years covers only 2017-2018 for this generation
Used/donor module guide
Compatible donor years: 2017, 2018
Always match the full part number before buying a used module.
- PART
- ~62100-T1
- NOTES
- GDS2 coding and angle calibration.
AVN Head Unit - 9.2-inch (Genesis Connected Services) Verify by VIN 2019-2020 ~96560-B1 (VERIFY VIA GDS2 VIN)
_years covers only 2019-2020 for this generation
Used/donor module guide
Compatible donor years: 2019, 2020
Always match the full part number before buying a used module.
- PART
- ~96560-B1 (VERIFY VIA GDS2 VIN)
- NOTES
- GDS2 coding required after replacement. 9.2-inch display standard on 2019-2020 G80. Confirm trim level before ordering.
Digital Instrument Cluster Verify by VIN 2019-2020 ~94013-B1 (VERIFY VIA GDS2 VIN)
_years covers only 2019-2020 for this generation
Used/donor module guide
Compatible donor years: 2019, 2020
Always match the full part number before buying a used module.
- PART
- ~94013-B1 (VERIFY VIA GDS2 VIN)
- NOTES
- GDS2 VIN coding required. Mileage stored in cluster. Confirm cluster size (7-inch vs 12-inch) by trim level.
Around View Monitor Controller Verify by VIN 2019-2020 ~95760-B1 (VERIFY VIA GDS2)
_years covers only 2019-2020 for this generation
Used/donor module guide
Compatible donor years: 2019, 2020
Always match the full part number before buying a used module.
- PART
- ~95760-B1 (VERIFY VIA GDS2)
- NOTES
- GDS2 AVM calibration after controller replacement. Calibration mat required.
5 gateway, immobilizer, and security items documented across 2017-2020.
KEY SECURITY & IMMOBILIZER
Key Security & Immobilizer
- System IMMO4
- Add Key Yes
- All Keys Lost Yes
Genesis IMMO4 - pin extraction available via GDS2 dealer auth; AKL supported
IMMOBILIZER MODULES
Immobilizer Modules
Genesis IMMO5 (BCM-integrated) Verify by VIN 2017-2018
_years covers only 2017-2018 for this generation
Used/donor module guide
Compatible donor years: 2017, 2018
Always match the full part number before buying a used module.
- SECURITY
- IMMO5
- NOTES
- IMMO5 AES-256. No OBD pin extraction. GDS2 + dealer auth for all key and AKL procedures.
Genesis IMMO4 (BCM-integrated) Verify by VIN 2019-2020 INTEGRATED IN BCM (~95400-B1)
_years covers only 2019-2020 for this generation
Used/donor module guide
Compatible donor years: 2019, 2020
Always match the full part number before buying a used module.
- PART
- INTEGRATED IN BCM (~95400-B1)
- SECURITY
- immo4
- NOTES
- IMMO4. Pin extraction available via GDS2 with dealer authorization, or Autel IM608 Pro. BCM and ECM both require adaptation after any replacement. Aftermarket tools with limited Genesis coverage may fail IMMO4 adaptation - test tool compatibility before starting.
KEY & FOB TYPES
Key & Fob Types
Proximity Smart Key Fob Verify by VIN 2017-2018 ~95440-T1
_years covers only 2017-2018 for this generation
Used/donor module guide
Compatible donor years: 2017, 2018
Always match the full part number before buying a used module.
- PART
- ~95440-T1
- NOTES
- IMMO5. GDS2 + dealer auth. No aftermarket support. Min 2 keys for add-key. AKL requires dealer auth.
Proximity Smart Key Fob Verify by VIN 2019 ~95440-B1 (VERIFY VIA GDS2)
_years covers only 2019 for this generation
Used/donor module guide
Compatible donor years: 2019
Always match the full part number before buying a used module.
- PART
- ~95440-B1 (VERIFY VIA GDS2)
- NOTES
- IMMO4. Key programming via GDS2 or Autel IM608 Pro. Minimum 2 working keys for add-key. AKL requires pin extraction + GDS2 dealer auth. G80 2019-2020 max 8 keys per vehicle.
Proximity Smart Key Fob Verify by VIN 2020 ~95440-B1 (VERIFY VIA GDS2)
_years covers only 2020 for this generation
Used/donor module guide
Compatible donor years: 2020
Always match the full part number before buying a used module.
- PART
- ~95440-B1 (VERIFY VIA GDS2)
- NOTES
- IMMO4. Key programming via GDS2 or Autel IM608 Pro. Minimum 2 working keys for add-key. AKL requires pin extraction + GDS2 dealer auth. G80 2019-2020 max 8 keys per vehicle.
Replacement Notes
IMMO4 system. GDS/SmartKey (KDS) required for key programming and module replacement. Pin code extractable via obd; akl supported.
ARCHITECTURE & CONNECTIVITY
Architecture & Connectivity
- Body Construction
- Steel unibody; high-strength steel front and rear subframes
- OBD Protocol
- ISO 15765-4 CAN (500 kbps); UDS (ISO 14229)
- CAN Architecture
- Hyundai/Genesis CAN bus (HS-CAN, MS-CAN, LIN for body subsystems)
- Infotainment
- Genesis Connected Services AVN; 9.2-inch display; Apple CarPlay / Android Auto
- OTA Capable
- No
- Infotainment Name
- Genesis Connected Services
- ECU Unlock Supported
- Yes
- Custom Programming
- Yes
WHAT WE RESOLVE
1st Gen (2017-2020) common module and ADAS issues
- ADAS calibration drift Watch for calibration needs after windshield, bumper, suspension, camera, or radar work. Documented systems include Forward Collision-Avoidance Assist (FCA) - Front Camera (2017), Forward Radar (77GHz) (2017), Highway Driving Assist (HDA) (2017), and Blind Spot Detection (BSD) - Left Rear Radar (2017). Year-marked systems apply only to the shown range.
- SRS crash-data and warning light SRS service can involve SRS Control Module (SRSCM). Part numbers and crash-data workflow are confirmed for the exact year/VIN.
- Replacement module setup ECU/PCM replacement programming, BCM configuration, TCU/TCM cloning, ABS/EBCM setup are represented in the merged generation data. Rows with year ranges do not apply to every model year; verify by VIN.
- Gateway, key, and immobilizer access Gateway, key, and immobilizer procedures are represented by 5 merged security records. Access and all-keys-lost support varies by year - verify by VIN.
FREQUENTLY ASKED QUESTIONS
FAQ
Can you program Genesis G80 (2017-2020) modules?
Yes. Core Auto Logic supports generation-scoped module programming for the Genesis G80 (2017-2020). The merged generation data includes ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS coverage. Rows marked with a year range apply only to that part of the span; unmarked rows are present across the merged generation data.
Which modules are documented for Genesis G80 (2017-2020)?
The Genesis G80 (2017-2020) generation currently shows 21 core module records across ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS groups. SRS examples include SRS Control Module (SRSCM). Part numbers and module variants must be confirmed for your exact year/VIN. Reference part number: 84530-B1500 - confirm for your exact year/VIN.
Does Genesis G80 (2017-2020) need ADAS calibration after glass or collision work?
The merged generation data documents 17 ADAS systems, including Forward Collision-Avoidance Assist (FCA) - Front Camera (2017), Forward Radar (77GHz) (2017), Highway Driving Assist (HDA) (2017), Blind Spot Detection (BSD) - Left Rear Radar (2017), and Blind Spot Detection (BSD) - Right Rear Radar (2017-2018). Calibration triggers include Windshield Replacement (2017-2018), Front Bumper Repair or Replacement (2017-2018), Rear Bumper Repair or Replacement (2017-2018), and Any Collision (2017-2018). Procedure type is VIN-specific scan-tool procedure; verify exact requirements by VIN before setup.
Can you reset the airbag module on Genesis G80 (2017-2020)?
Yes. The generation data includes 10 SRS records, including SRS Control Module (SRSCM). Bench reset, cloning, and replacement setup are handled after part-number review. Any SRS part number shown for this generation is planning data only - confirm for your exact year/VIN. Reference part number: 84530-B1500 - confirm for your exact year/VIN.
Do all Genesis G80 (2017-2020) years use the same parts?
No assumption should be made across the full span. The generation page merges rows across 2017-2020; any row that does not span all data-bearing years is printed with its year range or treated as varies by year - verify by VIN. Part numbers always require exact year/VIN confirmation before ordering, cloning, or programming.
Can you program keys or immobilizer systems for Genesis G80 (2017-2020)?
Yes, where the VIN and security workflow support it. The generation data includes 5 gateway, immobilizer, or key-security records. Key records are present in the merged generation data. Security access, all-keys-lost eligibility, and add-key workflows vary by year - verify by VIN.
How long does service take for Genesis G80 (2017-2020)?
Most programming, cloning, SRS, and calibration jobs are quoted after VIN, DTC, part number, and repair-scope review. Labor time varies by year - verify by VIN before scheduling. Mail-in module work typically depends on module condition, donor data, and shipping window.
Is Genesis G80 (2017-2020) service mobile or mail-in?
Both paths are available depending on the job. Mobile service covers DFW on-vehicle diagnostics, ADAS setup, key programming, and post-repair coding. Mail-in service covers ECU, BCM, SRS, TCU, ABS, and other bench module work nationwide. We confirm the correct path for your exact year/VIN before scheduling.
More G80 generations
1st Gen 2017-2020 You are here 2nd Gen 2021-2026