Choose a make, model and year, or start with a VIN.
ADAS calibration, module programming, and security relearns
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Choose a service to start your quote.
This 2019 Genesis G80 page documents 5 ADAS systems, including Forward Collision-Avoidance Assist (FCA) - Forward Camera, Forward Radar (77GHz), Blind Spot Detection (BSD) - Rear Radar, and Lane Keeping Assist (LKA) - Forward Camera (shared).
View ADAS dataDocumented calibration triggers include Windshield Replacement, Front Bumper Repair, Rear Bumper Repair, and Mirror Replacement. Use the ADAS tab for the full trigger list.
View triggersThis page indexes 23 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and IPC coverage.
View modulesThis page includes 2 gateway, immobilizer, or key-security records for this 2019 Genesis G80.
View securityCore Auto Logic supports exact-year diagnostics, ADAS calibration, module programming, and security-access planning for the 2019 Genesis G80 using the documented systems and module data on this page.
Choose a sectionVIN and build details determine exact service eligibility. A missing record does not mean we cannot help; ask about your vehicle.
VIN pos 4-8 identifies model/trim/engine/restraint. Genesis WMI: KMT. Position 4-5 = model. Position 10 = model year code.
Genesis Connected Services
Genesis SmartSense: Forward Collision Alert, Lane Keeping Assist, Driver Attenti - Available; Platform: RG (Genesis G80 3rd generation - Confirmed
Genesis SmartSense: Forward Collision Alert, Lane Keeping Assist, Driver Attention Warning, Blind Spot Detection, Smart Cruise Control, Rear Cross-Traffic Alert, Around View Monitor (premium trims)
VIN pos 4-8 identifies model/trim/engine/restraint. Genesis WMI: KMT. Position 4-5 = model. Position 10 = model year code.
Genesis Connected Services; Genesis Connected Services AVN; 9.2-inch display; Apple CarPlay / Android Auto
CAN: Hyundai/Genesis CAN bus (HS-CAN, MS-CAN, LIN for body subsystems)
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
Hyundai GDS Mobile / Hyundai KDS
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Choose a section to view data
Documented module coverage for the 2019 Genesis G80. Counts reflect modules our techs have programmed or calibrated on this exact platform.
Forward camera, radar, surround-view and lane-keep recalibration after windshield, suspension or fascia work.
Open ADAS tabPowertrain reprogramming, calibration updates, replacement ECU configuration and security access.
Open Modules tabBody control module, gateway and accessory programming. Includes feature-bit reconfiguration.
Open Modules tabTransmission control module reprogramming, adaptive learning reset and replacement TCM clone.
Open Modules tabCrash-data clear, hard-code reset and replacement airbag module configuration.
Open Modules tabABS / EBCM bleed support, replacement module coding and yaw-rate sensor calibration.
Open Modules tabInstrument cluster cloning, steering angle sensor calibration and other supporting modules.
Open Modules tabInfotainment radio, surround view, remote start, trailer brake controller and other equipped systems.
Open Modules tabService events that require ADAS recalibration on this vehicle. Tap to see what triggers what.
Open ADAS tabNeed something not listed? Most undocumented modules can still be programmed.
Get a QuoteCalibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.
Verify platform code matches when cross-referencing part numbers across model years.
Common Genesis G80 issues we resolve on this platform: Forward Collision-Avoidance Assist (FCA) - Forward Camera, Forward Radar (77GHz), Blind Spot Detection (BSD) - Rear Radar, and Lane Keeping Assist (LKA) - Forward Camera (shared) recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - RG (Genesis G80 3rd generation - pre-2021 redesign) platform uses Hyundai/Genesis CAN bus (HS-CAN, MS-CAN, LIN for body subsystems).
Genesis SmartSense: Forward Collision Alert, Lane Keeping Assist, Driver Attention Warning, Blind Spot Detection, Smart Cruise Control, Rear Cross-Traffic Alert, Around View Monitor (premium trims)
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Forward Collision-Avoidance Assist (FCA) - Forward Camera | Forward Camera | Camera | Static | YES | ~99210-B1100 (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Forward Radar (77GHz) | Front Radar | Radar | Static | YES | ~99110-B1100 (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Blind Spot Detection (BSD) - Rear Radar | Side Radar | Radar | Static + Dynamic | YES | ~99140-B1000 (L), 99150-B1000 (R) (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Lane Keeping Assist (LKA) - Forward Camera (shared) | Forward Camera | Camera | Static | YES | - | |
| Around View Monitor (AVM) - Surround View | Forward Camera | Camera | Static | YES | ~95760-B1 (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) |
ADAS SYSTEM
Need this calibrated?
Get a quote for ADAS calibrationGDS2 ADAS static calibration required. Level surface, calibration target at approx. 2.5m. OEM-equivalent glass only. Verify all SmartSense DTCs clear post-calibration.
GDS2 radar alignment after front bumper work. Vehicle at curb weight. Inspect mounting bracket.
GDS2 BSD initialization. Functional test required. Rear park sensor adaptation via GDS2 if replaced.
GDS2 AVM calibration if mirror assembly with integrated camera was replaced. Calibration mat procedure.
Full GDS2 scan. ACM crash clear or replace. All ADAS sensors inspect and recalibrate. Verify knee airbag and curtain bag squib connectors after front interior work.
GDS2 VIN coding and IMMO4 adaptation for all security-relevant modules. Battery SOC >80% before programming.
Camera module replacement requires full recalibration using GDS Mobile.
Radar module replacement requires alignment/calibration using GDS Mobile.
Blind spot monitoring sensor replacement requires calibration using GDS Mobile.
No matching records. Try a shorter part number or clear the filters. You can still request help if your module is not listed.
ADAS calibration pricing for a 2019 Genesis G80 depends on which of its 5 documented systems need work after a repair. This vehicle is documented with Forward Collision-Avoidance Assist (FCA) - Forward Camera, Forward Radar (77GHz), Blind Spot Detection (BSD) - Rear Radar, Lane Keeping Assist (LKA) - Forward Camera (shared), and Around View Monitor (AVM) - Surround View. We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.
Yes. The 2019 Genesis G80 uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: 84530-B1500. Mobile diagnosis and programming are available in DFW, and mail-in module service is available nationwide. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.
After windshield replacement on a 2019 Genesis G80, Forward Collision-Avoidance Assist (FCA) - Forward Camera, Forward Radar (77GHz), and Lane Keeping Assist (LKA) - Forward Camera (shared) rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in module service is available nationwide for eligible module work.
Most 2019 Genesis G80 onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 14 programmable modules documented in our database (2 ECU, 1 BCM, 2 TCU, 1 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module service is available nationwide.
We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, post-repair recoding, and supported module work). Mail-in module service is available nationwide. Quote the work and we will confirm the active service path for the 2019 Genesis G80. Do not ship a module unless support confirms next steps.
Every programming, cloning, and calibration job on the 2019 Genesis G80 is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
We program, clone, repair, or replace the full programmable-module stack on a 2019 Genesis G80. For this vehicle our database documents:
Infotainment on this platform: Genesis Connected Services. Send the VIN and the operations performed and we will confirm support and pricing.
Additional OEM-sourced part numbers for the 2019 Genesis G80 covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.
Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.
Send your VIN and we'll confirm exact module support and pricing in the quote response.
1-year unlimited warranty on every flash and calibration.
Matching catalog references
These pages list a matching part reference in the same module category. This does not confirm interchangeability. Verify the complete part number, suffix, VIN and build before selecting a replacement.
Factory diagnostic software is available. We confirm the appropriate software and supported procedure for your vehicle.
Get onsite help in Dallas-Fort Worth. Ask about same-day availability or a one-time remote session for eligible work.