VIN / Build Split
VIN pos 4-8 identifies model/trim/engine/restraint. Genesis WMI: KMT. Position 4-5 = model. Position 10 = model year code.
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
DFW Mobile Service
DFW Serving Dallas / Fort Worth
2023 Genesis G80 Supported Services
2023 Genesis G80
ADAS calibration, module programming, and security relearns
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Technical snapshot
- Platform RG3 (Genesis G80 3rd Generation)
- CAN Architecture Hyundai/Genesis CAN FD (HS-CAN FD, MS-CAN, LIN)
- Security Genesis IMMO5 AES-256 - no OBD pin extraction; AKL requires GDS2 + dealer auth
What do you need fixed?
Choose a service to start your quote.
OVERVIEW
Expert ADAS calibration, module programming, and diagnostic recovery for the 2023 Genesis G80. On this vehicle we cover documented systems include Forward Collision-Avoidance Assist (FCA) - Front Camera, Forward Radar (77GHz), and Blind Spot Monitor (BSD), this RG3 (Genesis G80 3rd Generation) platform vehicle, IMMO5 immobilizer support, Genesis ccNC infotainment programming. Mobile across the DFW Metroplex; mail-in module service is available nationwide.
Platform
RG3 (Genesis G80 3rd Generation)
Production
2017-present
Trim Levels
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Drivetrain
RWD / AWD
Engine
-
CAN Speed
Hyundai/Genesis CAN FD (HS-CAN FD, MS-CAN, LIN)
YEAR-SPECIFIC NOTES
Infotainment
Genesis ccNC
Exact-year service summary for 2023 Genesis G80
ADAS coverage
This 2023 Genesis G80 page documents 4 ADAS systems, including Forward Collision-Avoidance Assist (FCA) - Front Camera, Forward Radar (77GHz), Blind Spot Monitor (BSD), and Highway Driving Assist (HDA).
View ADAS dataCalibration triggers
Documented calibration triggers include Windshield Replacement, Front Bumper Repair or Replacement, Rear Bumper Repair or Replacement, and Any Collision. Use the ADAS tab for the full trigger list.
View triggersProgrammable modules
This page indexes 46 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and IPC coverage.
View modulesGateway and security
This page includes 2 gateway, immobilizer, or key-security records for this 2023 Genesis G80.
View securityCore Auto Logic capability
Core Auto Logic supports exact-year diagnostics, ADAS calibration, module programming, and security-access planning for the 2023 Genesis G80 using the documented systems and module data on this page.
Choose a sectionWhat changes on this exact year
Feature availability
Genesis Advanced Safety Level 2: Forward Collision Alert, Lane Keeping Assist, H - Available; Platform: RG3 (Genesis G80 3rd Generation) - Confirmed
Driver-assist suite
Genesis Advanced Safety Level 2: Forward Collision Alert, Lane Keeping Assist, Highway Driving Assist, Driver Attention Warning, Blind Spot Detection, Rear Cross-Traffic Collision Avoidance, Smart Cruise with Stop-and-Go, Parking Collision Avoidance
VIN and build split
VIN pos 4-8 identifies model/trim/engine/restraint. Genesis WMI: KMT. Position 4-5 = model. Position 10 = model year code.
Infotainment context
Genesis ccNC; Genesis Connected Services; 14.5-inch display; OTA; wireless CarPlay/Android Auto
Network and access
CAN: Hyundai/Genesis CAN FD (HS-CAN FD, MS-CAN, LIN)
Tool access for this exact year
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
Factory scan, coding, and calibration access
Hyundai GDS Mobile / Hyundai KDS
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
ADAS scan, setup, and verification
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Bench cloning and chip-level recovery
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Choose a section to view data
SUPPORTED SYSTEMS
What we service on this vehicle
Documented module coverage for the 2023 Genesis G80. Counts reflect modules our techs have programmed or calibrated on this exact platform.
ADAS Calibration
4 modules documented
Forward camera, radar, surround-view and lane-keep recalibration after windshield, suspension or fascia work.
Open ADAS tabEngine / ECU Programming
2 modules documented
Powertrain reprogramming, calibration updates, replacement ECU configuration and security access.
Open Modules tabBCM / Body Programming
1 module documented
Body control module, gateway and accessory programming. Includes feature-bit reconfiguration.
Open Modules tabTCU / Transmission
2 modules documented
Transmission control module reprogramming, adaptive learning reset and replacement TCM clone.
Open Modules tabSRS / Airbag Reset
34 modules documented
Crash-data clear, hard-code reset and replacement airbag module configuration.
Open Modules tabABS / Brake Module
1 module documented
ABS / EBCM bleed support, replacement module coding and yaw-rate sensor calibration.
Open Modules tabIPC, SAS & Other Modules
3 modules documented
Instrument cluster cloning, steering angle sensor calibration and other supporting modules.
Open Modules tabConnectivity & Accessories
3 modules documented
Infotainment radio, surround view, remote start, trailer brake controller and other equipped systems.
Open Modules tabRecalibration Triggers
8 modules documented
Service events that require ADAS recalibration on this vehicle. Tap to see what triggers what.
Open ADAS tabNeed something not listed? Most undocumented modules can still be programmed.
Get a QuoteFeature availability 2
Genesis Advanced Safety Level 2: Forward Collision Alert, Lane Keeping Assist, H
AvailableCalibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.
Platform: RG3 (Genesis G80 3rd Generation)
ConfirmedVerify platform code matches when cross-referencing part numbers across model years.
WHAT WE RESOLVE
Common issues on this vehicle
Common Genesis G80 issues we resolve on this platform: Forward Collision-Avoidance Assist (FCA) - Front Camera, Forward Radar (77GHz), Blind Spot Monitor (BSD), and Highway Driving Assist (HDA) recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - RG3 (Genesis G80 3rd Generation) platform uses Hyundai/Genesis CAN FD (HS-CAN FD, MS-CAN, LIN).
ADAS CALIBRATION MATRIX
ADAS systems on this vehicle
Genesis Advanced Safety Level 2: Forward Collision Alert, Lane Keeping Assist, Highway Driving Assist, Driver Attention Warning, Blind Spot Detection, Rear Cross-Traffic Collision Avoidance, Smart Cruise with Stop-and-Go, Parking Collision Avoidance
Scroll for part numbers and Details
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Forward Collision-Avoidance Assist (FCA) - Front Camera | Forward Camera | Camera | Static | YES | ~99210-T1 (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Forward Radar (77GHz) | Front Radar | Radar | Static | YES | ~99110-T1 (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Blind Spot Monitor (BSD) | Side Radar | Radar | Static + Dynamic | YES | ~99140-T1 (L), 99150-T1 (R) | |
| Highway Driving Assist (HDA) | Forward Camera | Camera | Static | YES | - |
ADAS SYSTEM
YES Supported
Identification
- System type
- Module category
- Sensor location
Part Numbers
- OEM
- Alternative
Calibration & Triggers
- Calibration type
- Programming approach
- Requires PMI
- Trigger events
Technical Notes
- Chip / MCU
- Service notes
Need this calibrated?
Get a quote for ADAS calibration WHEN IS CALIBRATION REQUIRED?
Triggers for ADAS recalibration
Windshield Replacement Affected: FCA Camera, LKA, HDA, AEB
GDS2 static calibration. OEM glass. Target at approx. 2.5m.
Front Bumper Repair or Replacement Affected: Front Radar, Smart Cruise, AEB
GDS2 radar alignment.
Rear Bumper Repair or Replacement Affected: BSD Radars, RCCA
GDS2 BSD initialization. Functional test.
Any Collision Affected: ACM, all ADAS
Full GDS2 scan. ACM clear or replace. Recalibrate ADAS. Dealer auth for IMMO5.
Any Module Replacement Affected: BCM, ECM, ACM, ABS
GDS2 + dealer auth for IMMO5. GDS2 VIN coding for all others.
Forward Radar Replacement
Radar module replacement requires alignment/calibration using GDS Mobile.
BSM Sensor Replacement
Blind spot monitoring sensor replacement requires calibration using GDS Mobile.
Mirror Replacement
If BSD sensor is mirror-integrated, recalibration required. Verify sensor location; use GDS Mobile if applicable.
SRS Modules
SRS Control Module (SRSCM) 34 records
Under center console
- Part number
- 80310-JI000
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
Under center console
- Part number
- 11256-08201
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
Under center console
- Part number
- 11254-06201
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
Under center console
- Part number
- 80410-T1000
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
Under center console
- Part number
- 80420-T1000
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
Under center console
- Part number
- 80100-T1000-GLW
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
Under center console
- Part number
- 80100-T1000-NNB
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
Under center console
- Part number
- 80100-T1000-OWN
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
Under center console
- Part number
- 13395-06001
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
Under center console
- Part number
- 13395-08001
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
Under center console
- Part number
- 80310-T1000
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
Under center console
- Part number
- 80100-T1000-DUE
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
Under center console
- Part number
- 80100-T1000-IDG
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
Under center console
- Part number
- 80100-T1000-NGR
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
Under center console
- Part number
- 80100-T1000-NS8
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
Under center console
- Part number
- 80100-T1000-NSS
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
Under center console
- Part number
- 80100-T1000-RE1
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
Under center console
- Part number
- 80100-T1000-VNB
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
Under center console
- Part number
- 80100-T1300-DUE
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
Under center console
- Part number
- 80100-T1300-IDG
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
Under center console
- Part number
- 80100-T1300-NGR
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
Under center console
- Part number
- 80100-T1300-NNB
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
Under center console
- Part number
- 80100-T1300-NS8
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
Under center console
- Part number
- 80100-T1300-NSS
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
Under center console
- Part number
- 80100-T1300-OWN
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
Under center console
- Part number
- 80100-T1300-VNB
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
Under center console
- Part number
- 80100-T1AA0-DUE
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
Under center console
- Part number
- 80100-T1AA0-IDG
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
Under center console
- Part number
- 80100-T1AA0-NGR
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
Under center console
- Part number
- 80100-T1AA0-NNB
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
Under center console
- Part number
- 80100-T1AA0-NS8
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
Under center console
- Part number
- 80100-T1AA0-NSS
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
Under center console
- Part number
- 80100-T1AA0-OWN
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
Under center console
- Part number
- 80100-T1AA0-VNB
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
ECU Modules
ECM - 2.5T Smartstream G4KH (224hp) ~39130-3MN (VERIFY VIA GDS2)
- Part number
- ~39130-3MN (VERIFY VIA GDS2)
- Protocol / method
- OBD Programming Port
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Bosch MED17 / Continental
- Notes
- GDS2 + Programming Port. IMMO5 - dealer auth. Throttle body adaptation.
ECM - 3.5T Lambda III V6 Bi-Turbo (375hp) ~39130-3M (VERIFY VIA GDS2)
- Part number
- ~39130-3M (VERIFY VIA GDS2)
- Protocol / method
- OBD Programming Port
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Bosch MED17 / Continental
- Notes
- GDS2 + Programming Port. IMMO5 - dealer auth.
BCM Modules
Body Control Module (BCM) ~95400-T1 (VERIFY VIA GDS2)
- Part number
- ~95400-T1 (VERIFY VIA GDS2)
- Security
- IMMO5
- Coding required
- Yes
- Cloning supported
- No
- Notes
- IMMO5 AES-256. GDS2 + Genesis dealer authorization. No aftermarket tool support.
TCU / TCM Transmission Modules
TCU - 8AT 8-Speed Automatic 95440-L1
- Part number
- 95440-L1
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Continental TC1797
- Notes
- Requires VIN coding and TCU relearn via GDS2. Use Hyundai ATF SP-IV-RR fluid. Shift adaptation required after installation.
TCU - 8DCT 8-Speed Dual Clutch 95440-L2
- Part number
- 95440-L2
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Hyundai Kefico TC1797
- Notes
- Original TCU required for dual clutch variants. Complex calibration with clutch adaptation. Requires GDS2 for programming and actuator learn procedures.
ABS / Brake Modules
ABS/ESC Module ~58920-T1 (VERIFY VIA GDS2)
- Part number
- ~58920-T1 (VERIFY VIA GDS2)
- Cloning supported
- No
- Notes
- GDS2 adaptation, automated bleed, steering angle sensor recalibration.
Other Modules (IPC, SAS)
Instrument Panel Cluster (IPC) 94013-T1010
- Part number
- 94013-T1010
- Cloning supported
- Yes
- Notes
- RG3 G80 IPC 14.5" digital cluster standard
Instrument Panel Cluster (IPC) 94013-T1020
- Part number
- 94013-T1020
- Cloning supported
- Yes
- Notes
- RG3 G80 IPC 14.5" digital cluster Premium
Connectivity & Accessories
14.5-inch Infotainment Head Unit ~96560-T1
- Part number
- ~96560-T1
- Notes
- GDS2 coding after replacement.
Digital Instrument Cluster ~94013-T1
- Part number
- ~94013-T1
- Notes
- GDS2 VIN coding.
Head-Up Display (HUD) ~62100-T1
- Part number
- ~62100-T1
- Notes
- GDS2 coding and angle calibration.
ARCHITECTURE & CONNECTIVITY
Architecture & Connectivity
- Body Construction
- Steel unibody; Genesis high-strength steel and aluminum composite
- OBD Protocol
- ISO 15765-4 CAN FD; UDS (ISO 14229)
- CAN Architecture
- Hyundai/Genesis CAN FD (HS-CAN FD, MS-CAN, LIN)
- Infotainment
- Genesis Connected Services; 14.5-inch display; OTA; wireless CarPlay/Android Auto
- OTA Capable
- Yes
- Infotainment Name
- Genesis ccNC
- ECU/TCM Unlocking
- Contact us
- ECU/TCM Flashing
- Contact us
OPENPILOT / COMMA.AI
Openpilot Compatibility
Not Supported
Officially supported (openpilot master)
- Package
- SCC + LFA / HDA II
- Hardware
- Comma 3X + Hyundai J/H/P harness
- Harness
- Hyundai J/H/P Harness
2024 2.5T Advanced uses HDA II / Can-FD via Hyundai P harness.
FREQUENTLY ASKED QUESTIONS
FAQ
How much does ADAS calibration cost for a 2023 Genesis G80?
ADAS calibration pricing for a 2023 Genesis G80 depends on which of its 4 documented systems need work after a repair. This vehicle is documented with Forward Collision-Avoidance Assist (FCA) - Front Camera, Forward Radar (77GHz), Blind Spot Monitor (BSD), and Highway Driving Assist (HDA). We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.
Can you reset the airbag light on a 2023 Genesis G80?
Yes. The 2023 Genesis G80 uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: 80310-JI000. Mobile diagnosis and programming are available in DFW, and mail-in module service is available nationwide. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.
What is needed after replacing the windshield on a 2023 Genesis G80?
After windshield replacement on a 2023 Genesis G80, Forward Collision-Avoidance Assist (FCA) - Front Camera and Forward Radar (77GHz) rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in module service is available nationwide for eligible module work.
How long does a 2023 Genesis G80 module service take?
Most 2023 Genesis G80 onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 13 programmable modules documented in our database (2 ECU, 1 BCM, 2 TCU, 1 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module service is available nationwide.
Do you cover the 2023 Genesis G80 on-site, or is this mail-in only?
We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, post-repair recoding, and supported module work). Mail-in module service is available nationwide. Quote the work and we will confirm the active service path for the 2023 Genesis G80. Do not ship a module unless support confirms next steps.
What kind of warranty do you offer on 2023 Genesis G80 programming?
Every programming, cloning, and calibration job on the 2023 Genesis G80 is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
Which modules on a 2023 Genesis G80 can you actually service?
We program, clone, repair, or replace the full programmable-module stack on a 2023 Genesis G80. For this vehicle our database documents:
- 2 engine control (ECU/PCM)
- 2 transmission control (TCU/TCM)
- 1 body control (BCM and related)
- 1 ABS / brake control (EBCM)
- 1 immobilizer / security
- 1 key & fob
- 2 instrument cluster (IPC)
- 1 steering angle sensor (SAS)
- 4 ADAS module
Infotainment on this platform: Genesis ccNC. Send the VIN and the operations performed and we will confirm support and pricing.
Additional Module Part Numbers
Additional OEM-sourced part numbers for the 2023 Genesis G80 covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.
- ADAS Module Part Numbers
- ~99140-T1 (L), 99150-T1 (R)
- ECU / PCM Part Numbers
- 39110-3N388, 39121-2TRN0, 39128-3N021, 39128-3N022
- BCM / Body Module Part Numbers
- ~95400-T1 (VERIFY VIA GDS2)
- TCU / TCM Part Numbers
- 95440-L1, 95440-L2
- SRS / Airbag Module Part Numbers
- 80310-JI000, 11256-08201, 11254-06201, 80410-T1000, 80420-T1000, 80100-T1000-GLW, 80100-T1000-NNB, 80100-T1000-OWN, 13395-06001, 13395-08001, 80310-T1000, 80100-T1000-DUE, 80100-T1000-IDG, 80100-T1000-NGR, 80100-T1000-NS8, 80100-T1000-NSS, 80100-T1000-RE1, 80100-T1000-VNB, 80100-T1300-DUE, 80100-T1300-IDG, 80100-T1300-NGR, 80100-T1300-NNB, 80100-T1300-NS8, 80100-T1300-NSS, 80100-T1300-OWN, 80100-T1300-VNB, 80100-T1AA0-DUE, 80100-T1AA0-IDG, 80100-T1AA0-NGR, 80100-T1AA0-NNB, 80100-T1AA0-NS8, 80100-T1AA0-NSS, 80100-T1AA0-OWN, 80100-T1AA0-VNB
- ABS / EBCM Part Numbers
- 58920-T1, CONTINENTAL ESC (G80 RG3 3RD GEN REDESIGN)
- Instrument Cluster (IPC) Part Numbers
- 94013-T1010, 94013-T1020
- Transmission Control Module (TCM) Part Numbers
- 95440-L1, 95440-L2
Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.
Different trim or build?
Send your VIN and we'll confirm exact module support and pricing in the quote response.
Hit a security wall? We've got the keys.
1-year unlimited warranty on every flash and calibration.
Shared module fitment
Vehicles sharing modules with the 2023 Genesis G80
These vehicles use one or more of the same replacement modules indexed for this vehicle.
Finish the repair
Need help finishing this repair?
Get onsite help in Dallas-Fort Worth. Ask about same-day availability or a one-time remote session for eligible non-VSP work.
Factory programming software Explore one-time factory coding and programming. We confirm the software and procedure for your vehicle. Module programming & recovery Replacing a module or dealing with a failed programming attempt? Send the part numbers and fault scan for review. Onsite tools & equipment Bring in a technician or ask about hourly, daily and weekly rentals where licensing and equipment availability allow.