Use vehicle lookup when you know the year, make, and model. Use quote when the car is in front of you and the symptom matters more than the catalog page.
The advanced Advanced ADAS architecture on the Hyundai Santa Fe leaves absolutely no room for error. From blind-spot radars to forward-facing cameras, our mobile technicians guarantee strict compliance with manufacturer repair procedures. SmartSense system requires static targeting. Rear cross-traffic collision-avoidance assist (RCCA) radars need precise angle setup.
3,200+
Vehicles supported
1-Year
Unlimited warranty
Same-Day
Mobile in DFW
OEM-Grade
Native diagnostics
MODEL SERVICE SNAPSHOT
What Core Auto Logic can do for the Hyundai Santa-Fe
Model coverage
This Hyundai Santa-Fe model page covers 20 indexed years from 2007-2026 with exact-year service pages for module, security, and calibration data.
Across indexed Hyundai Santa-Fe years, documented sensor systems include Forward Camera (Monocular), Forward Radar (77GHz), Blind Spot Monitor Sensor - Left (BSM), Blind Spot Monitor Sensor - Right (BSM), and Highway Driving Assist (HDA 2.0 - MX5 2024); 149 calibration trigger records are indexed across the model line.
Core Auto Logic supports model-line diagnostics, exact-year module programming, security-access planning, and ADAS calibration where equipped for the Hyundai Santa-Fe.
Complete mobile calibration and module programming available. Specific protocols vary by trim and replaced hardware.
[EPA] 3.3L | V6 | Regular | Front-Wheel Drive | Automatic 6-spd | 21 MPG comb.
3
DM/NC third-generation Santa Fe/Santa Fe Sport; verify body length and trim by VIN
2015 - 2018
Hyundai CAN architecture for DM/NC-generation Santa Fe/Santa Fe Sport; OBD-II DL...
ADAS SYSTEMS (7)
Hyundai ADAS equipment - VIN-specificForward Collision-Avoidance Assist (FCA) - Front CameraForward Radar (77GHz)Blind Spot Detection (BSD) - Left Rear RadarBlind Spot Detection (BSD) - Right Rear RadarRear View Camera (RVC)Park Distance Control (PDC) - Ultrasonic
Complete mobile calibration and module programming available. Specific protocols vary by trim and replaced hardware.
[EPA] 3.3L | V6 | Regular | All-Wheel Drive | Automatic (S6) | 20 MPG comb.
4
TM (4th Gen) - Hyundai N3 Unibody FWD/AWD
2019 - 2023
Hyundai CAN architecture; OBD2 DLC ISO 15765-4 CAN
ADAS SYSTEMS (8)
Forward Camera (Monocular)Forward Radar (77GHz)Blind Spot Monitor Sensor - Left (BSM)Blind Spot Monitor Sensor - Right (BSM)Lane Keep Assist / Lane Departure Warning (LKA/LDW)Park Distance Control (PDC)Highway Driving Assist (HDA)Highway Driving Assist (HDA - expanded 2023)
TM 4th Gen Hyundai Santa Fe - launch year 2019. Complete redesign from DM/DMA gen. Hyundai N3 unibody platform; FWD/AWD. Santa Fe XL discontinued - 2019+ is 2-row only (Palisade took over 3-row role)....
Hyundai CAN FD architecture (MX5); OBD2 DLC ISO 15765-4 CAN
ADAS SYSTEMS (7)
Forward Camera (Monocular)Forward Radar (77GHz)Blind Spot Monitor Sensor - Left (BSM)Blind Spot Monitor Sensor - Right (BSM)Highway Driving Assist (HDA 2.0 - MX5 2024)Blind-Spot View Monitor (BVM) - if equippedPark Distance Control (PDC)
MX5 5th Gen Hyundai Santa Fe - major redesign for 2024. Completely new exterior styling; updated interior; revised powertrain lineup. CRITICAL: MX5 uses new ADAS hardware - forward camera (~99211-S8xx...
FREQUENTLY ASKED QUESTIONS
FAQ
Which ADAS systems does the Hyundai Santa FE have, and which require calibration after collision repair?
Hyundai Santa FE coverage includes documented camera/radar ADAS. Forward cameras, radar, blind-spot, and steering-angle sensors usually need calibration after collision or suspension work.
Can you reset the airbag/SRS light on a Hyundai Santa FE?
Yes. We scan the Hyundai Santa FE SRS system, confirm crash data or stored faults, reset serviceable modules, and verify the warning light stays off after repairs.
What's involved in programming a replacement ECU/PCM for the Hyundai Santa FE?
Replacement ECU/PCM work on the CM (2006-2012), DM (2013-2018), TM (2019-2023), MX5 (2024+) platform requires module coding, immobilizer pairing, VIN/configuration setup, and post-programming checks with OE-grade tools.
Do you support all-keys-lost (AKL) on the Hyundai Santa FE?
Yes. AKL support is handled through an authorized locksmith workflow with proof of ownership, immobilizer access, key registration, and start authorization checks.
What's needed after windshield replacement on a Hyundai Santa FE?
After windshield replacement, the Hyundai Santa FE forward camera and any documented camera/radar ADAS lane or braking features should be aimed and calibrated before final road verification.
Can you service a Hyundai Santa FE on-site, mail-in, or both?
We support the Hyundai Santa FE both ways: on-site diagnostics, calibration, and key work when the vehicle is present, plus mail-in module reset or programming when suitable.
Generations
Santa Fe generation guides
Start at the generation guide that matches your build, then drill into the exact model-year page for module, security, and calibration specifics.
Across indexed Hyundai Santa-Fe years, documented sensor systems include Forward Camera (Monocular), Forward Radar (77GHz), Blind Spot Monitor Sensor - Left (BSM), Blind Spot Monitor Sensor - Right (BSM), and Highway Driving Assist (HDA 2.0 - MX5 2024); 149 calibration trigger records are indexed across the model line.
Core Auto Logic supports model-line diagnostics, exact-year module programming, security-access planning, and ADAS calibration where equipped for the Hyundai Santa-Fe.
Start with the model-year page before quoting module, security, or calibration work. Each year page carries the indexed systems and notes for that build.
The Core Auto Logic logo features a stylized circular design combining a mechanical gear with a globe made of interconnected green circuit lines. The circuit pattern represents advanced automotive electronics, diagnostics, and networked vehicle systems. The word "CORE" appears prominently within the circular design, with "AUTO LOGIC" displayed to the right in bold lettering. The overall design reflects expertise in ADAS calibration, ECU programming, and modern vehicle technology services.A compact version of the Core Auto Logic logo featuring a circular gear shape combined with a globe made of interconnected circuit lines, representing automotive electronics and advanced vehicle technology.A compact version of the Core Auto Logic logo featuring a circular gear shape combined with a globe made of interconnected circuit lines, representing automotive electronics and advanced vehicle technology.The CORE Auto Logic logo features a stylized gear partially encircling a globe made of green interconnected circuit lines, representing automotive technology and electronic systems. The word "CORE" appears prominently in bold lettering, followed by "AUTO LOGIC" to the right, conveying a focus on advanced vehicle diagnostics, ADAS calibration, and module programming services.The Core Auto Logic logo features a stylized circular design combining a mechanical gear with a globe made of interconnected green circuit lines. The circuit pattern represents advanced automotive electronics, diagnostics, and networked vehicle systems. The word "CORE" appears prominently within the circular design, with "AUTO LOGIC" displayed to the right in bold lettering. The overall design reflects expertise in ADAS calibration, ECU programming, and modern vehicle technology services.