VIN / Build Split
VIN pos 4-8 identifies model/trim/engine/restraint. Hyundai WMI: 5NP, KMH, 5NM. Position 4-5 = model. Position 10 = model year code.
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
DFW Mobile Service
DFW Serving Dallas / Fort Worth
2022 Hyundai Santa-Fe Supported Services
2022 Hyundai Santa-Fe
ADAS calibration, module programming, and security relearns
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Technical snapshot
- Platform TM (4th Gen) - Hyundai N3 Unibody FWD/AWD; PHEV variant (1.6T + motor)
- CAN Architecture Hyundai CAN architecture; OBD2 DLC ISO 15765-4 CAN
- Security Hyundai TIM (Transponder Immobilizer) AES-128; no OBD pin extraction; AKL requires GDS + Hyundai dealer authorization
What do you need fixed?
Choose a service to start your quote.
OVERVIEW
Expert ADAS calibration, module programming, and diagnostic recovery for the 2022 Hyundai Santa-Fe. On this vehicle we cover documented systems include Forward Camera (Monocular), Forward Radar (77GHz), and Blind Spot Monitor Sensor - Left (BSM), this TM (4th Gen) - Hyundai N3 Unibody FWD/AWD; PHEV variant (1.6T + motor) platform vehicle, Hyundai TIM (Transponder Immobilizer) AES-128 immobilizer support, Hyundai BlueLink infotainment programming. Mobile across the DFW Metroplex; mail-in module service is available nationwide.
Platform
TM (4th Gen) - Hyundai N3 Unibody FWD/AWD; PHEV variant (1.6T + motor)
Production
2007-present
Trim Levels
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Drivetrain
FWD / AWD
Engine
-
CAN Speed
Hyundai CAN architecture; OBD2 DLC ISO 15765-4 CAN
YEAR-SPECIFIC NOTES
Infotainment
Hyundai BlueLink
Exact-year service summary for 2022 Hyundai Santa-Fe
ADAS coverage
This 2022 Hyundai Santa-Fe page documents 6 ADAS systems, including Forward Camera (Monocular), Forward Radar (77GHz), Blind Spot Monitor Sensor - Left (BSM), and Blind Spot Monitor Sensor - Right (BSM).
View ADAS dataCalibration triggers
Documented calibration triggers include Windshield Replacement, Forward Camera Replacement, Front Bumper / Radar Repair or Replacement, and Rear Bumper / BSM Sensor Replacement. Use the ADAS tab for the full trigger list.
View triggersProgrammable modules
This page indexes 38 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and IPC coverage.
View modulesGateway and security
This page includes 5 gateway, immobilizer, or key-security records for this 2022 Hyundai Santa-Fe.
View securityCore Auto Logic capability
Core Auto Logic supports exact-year diagnostics, ADAS calibration, module programming, and security-access planning for the 2022 Hyundai Santa-Fe using the documented systems and module data on this page.
Choose a sectionWhat changes on this exact year
Feature availability
Hyundai SmartSense (SEL Plus and above): Forward Collision Alert/Automatic Emerg - Available; Platform: TM (4th Gen) - Confirmed
Driver-assist suite
Hyundai SmartSense (SEL Plus and above): Forward Collision Alert/Automatic Emergency Braking, Lane Keeping Assist, Lane Following Assist (upper trims), Highway Driving Assist (higher trims, 2022 expanded), Smart Cruise Stop & Go, Blind-Spot Collision Warning, Rear Cross-Traffic Collision Avoidance, Driver Attention Warning, Safe Exit Assist added 2022
VIN and build split
VIN pos 4-8 identifies model/trim/engine/restraint. Hyundai WMI: 5NP, KMH, 5NM. Position 4-5 = model. Position 10 = model year code.
Infotainment context
Hyundai BlueLink; 8" (SE/SEL) or 10.25" (SEL Plus/Limited/Calligraphy); Hyundai Blue Link with expanded OTA (2022+); Apple CarPlay / Android Auto; PHEV: digital instrument cluster on PHEV trims
Network and access
CAN: Hyundai CAN architecture; OBD2 DLC ISO 15765-4 CAN
Tool access for this exact year
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
Factory scan, coding, and calibration access
Hyundai GDS Mobile / Hyundai KDS
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
ADAS scan, setup, and verification
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Bench cloning and chip-level recovery
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Choose a section to view data
SUPPORTED SYSTEMS
What we service on this vehicle
Documented module coverage for the 2022 Hyundai Santa-Fe. Counts reflect modules our techs have programmed or calibrated on this exact platform.
ADAS Calibration
6 modules documented
Forward camera, radar, surround-view and lane-keep recalibration after windshield, suspension or fascia work.
Open ADAS tabEngine / ECU Programming
7 modules documented
Powertrain reprogramming, calibration updates, replacement ECU configuration and security access.
Open Modules tabBCM / Body Programming
3 modules documented
Body control module, gateway and accessory programming. Includes feature-bit reconfiguration.
Open Modules tabTCU / Transmission
2 modules documented
Transmission control module reprogramming, adaptive learning reset and replacement TCM clone.
Open Modules tabSRS / Airbag Reset
12 modules documented
Crash-data clear, hard-code reset and replacement airbag module configuration.
Open Modules tabABS / Brake Module
5 modules documented
ABS / EBCM bleed support, replacement module coding and yaw-rate sensor calibration.
Open Modules tabIPC, SAS & Other Modules
4 modules documented
Instrument cluster cloning, steering angle sensor calibration and other supporting modules.
Open Modules tabConnectivity & Accessories
5 modules documented
Infotainment radio, surround view, remote start, trailer brake controller and other equipped systems.
Open Modules tabRecalibration Triggers
14 modules documented
Service events that require ADAS recalibration on this vehicle. Tap to see what triggers what.
Open ADAS tabNeed something not listed? Most undocumented modules can still be programmed.
Get a QuoteFeature availability 2
Hyundai SmartSense (SEL Plus and above): Forward Collision Alert/Automatic Emerg
AvailableCalibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.
Platform: TM (4th Gen)
ConfirmedVerify platform code matches when cross-referencing part numbers across model years.
WHAT WE RESOLVE
Common issues on this vehicle
Common Hyundai Santa-Fe issues we resolve on this platform: Forward Camera (Monocular), Forward Radar (77GHz), Blind Spot Monitor Sensor - Left (BSM), and Blind Spot Monitor Sensor - Right (BSM) recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - TM (4th Gen) - Hyundai N3 Unibody FWD/AWD; PHEV variant (1.6T + motor) platform uses Hyundai CAN architecture; OBD2 DLC ISO 15765-4 CAN.
ADAS CALIBRATION MATRIX
ADAS systems on this vehicle
Hyundai SmartSense (SEL Plus and above): Forward Collision Alert/Automatic Emergency Braking, Lane Keeping Assist, Lane Following Assist (upper trims), Highway Driving Assist (higher trims, 2022 expanded), Smart Cruise Stop & Go, Blind-Spot Collision Warning, Rear Cross-Traffic Collision Avoidance, Driver Attention Warning, Safe Exit Assist added 2022
Scroll for part numbers and Details
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Forward Camera (Monocular) | Camera | ADAS | Static | YES | ~99211-S1 (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Forward Radar (77GHz) | Radar | ADAS | Static + Dynamic | YES | ~99110-S1 (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Blind Spot Monitor Sensor - Left (BSM) | Radar | ADAS | Static + Dynamic | YES | ~99140-S1 (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Blind Spot Monitor Sensor - Right (BSM) | Radar | ADAS | Static + Dynamic | YES | ~99150-S1 (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Highway Driving Assist (HDA) | Software | ADAS | None | YES | - | |
| Park Distance Control (PDC) | Ultrasonic | ADAS | None | YES | - |
ADAS SYSTEM
YES Supported
Identification
- System type
- Module category
- Sensor location
Part Numbers
- OEM
- Alternative
Calibration & Triggers
- Calibration type
- Programming approach
- Requires PMI
- Trigger events
Technical Notes
- Chip / MCU
- Service notes
Need this calibrated?
Get a quote for ADAS calibration WHEN IS CALIBRATION REQUIRED?
Triggers for ADAS recalibration
Windshield Replacement
SmartSense camera static calibration required. GDS ADAS guided menu. Level surface. Target approx. 2.5m (verify in GDS). DTC-free verify. If HDA equipped: verify HDA function post-calibration.
Forward Camera Replacement
GDS ADAS guided static calibration. Camera init + calibration. FCA/AEB, LKA, HDA (if equipped) DTC-free.
Front Bumper / Radar Repair or Replacement
GDS ADAS calibration + radar alignment. Inspect bracket. Smart Cruise, AEB, HDA (if equipped) DTC-free verify.
Rear Bumper / BSM Sensor Replacement
GDS BSD initialization. BCW and RCCA function verify. DTC clear. Road verify 20+ mph.
ABS / ESC Module Replacement
GDS ABS/ESC init + power brake bleed. SAS zero-point reset. Drive 35+ mph straight. PHEV: verify regen braking function after replacement.
Wheel Alignment / Steering Component Work
SAS zero-point reset via GDS. Drive 35+ mph straight. ESC/VSM clears after SAS.
ECM Replacement (non-PHEV)
GDS programming + VIN + IMMO coding. Throttle idle learn. Injector coding if needed. Verify ADAS active.
HEV Control Unit Replacement (PHEV)
GDS HEV ECU programming. HV service disconnect MANDATORY. Verify HV battery SOC and cell balance. No HV DTC. Insulated tools and PPE required.
TCM Replacement
GDS programming + adaptive reset. Drive cycle. Wet DCT: GDS fluid fill. PHEV: verify DCT and HEV integration DTCs.
Smart Key ECU Replacement
GDS + dealer authorization. All customer keys. Register all keys. Verify all start vehicle.
EPB Pad / Caliper Service (if equipped)
GDS EPB service mode retraction. GDS EPB init after. Verify apply/release.
Any Front-End Collision
Inspect and recalibrate forward camera after any front-end collision using GDS Mobile.
Forward Radar Replacement
Radar module replacement requires alignment/calibration using GDS Mobile.
Mirror Replacement
If BSD sensor is mirror-integrated, recalibration required. Verify sensor location; use GDS Mobile if applicable.
SRS Modules
SRS Control Module (SRSCM) 12 records
Under center console
- Part number
- 80310-S2500
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
Under center console
- Part number
- 11256-06161
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
Under center console
- Part number
- 11254-06161
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
Under center console
- Part number
- 11254-06201
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
Under center console
- Part number
- 80410-S2000
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
Under center console
- Part number
- 80420-S2000
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
Under center console
- Part number
- 80100-S2000-NNB
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
Under center console
- Part number
- 13273-06001
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
Under center console
- Part number
- 80410-S1000
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
Under center console
- Part number
- 80420-S1000
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
Under center console
- Part number
- 80100-S1500-NNB
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
Under center console
- Part number
- 80100-S1500-SST
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
ECU Modules
ECM - 2.4L GDI (G4KJ) 1 record
- Part number
- ~39106-2G (VERIFY VIA GDS)
- Notes
- GDS programming + VIN registration + IMMO coding. Injector data coding if required. Throttle idle learn.
ECM - 2.0T GDI (G4NC) 1 record
- Part number
- ~39106-2H (VERIFY VIA GDS)
- Notes
- GDS programming + VIN + IMMO. Boost adaptation reset via GDS. Verify correct calibration file for G4NC.
HEV Control Unit - PHEV (1.6T + motor) 1 record
- Part number
- ~36400-S1 (VERIFY VIA GDS - PHEV ONLY)
- Notes
- PHEV only (US 2022+). GDS HEV ECU programming. HIGH VOLTAGE SYSTEM: disable HV via service disconnect before any HEV ECU work. Verify HV battery SOC and cell balance via GDS after programming. Insulated tools and PPE mandatory. Verify no HV DTC after completion.
HV Battery ECU (PHEV only) 1 record
- Notes
- GDS HV battery ECU programming + cell balance verification. Service disconnect mandatory. Verify no HV DTC after. Authorized Hyundai PHEV service procedure required.
TCM - 8-Speed Wet-DCT (2.0T / PHEV) or 6-Speed Auto (2.4L) 1 record
- Part number
- ~954 (VERIFY VIA GDS - CONFIRM TYPE)
- Notes
- GDS TCM programming + adaptive reset. PHEV uses 6-speed DCT - verify transmission type before ordering. Adaptive reset drive cycle required. Wet DCT: GDS fluid temperature fill procedure.
AWD HTRAC Control Module (if equipped) 1 record
- Notes
- GDS AWD module programming + variant coding. DTC clear verify.
Infotainment Head Unit 1 record
- Notes
- GDS variant configuration. Blue Link OTA (expanded 2022+).
BCM Modules
Body Control Module (BCM) ~95400-S1 (VERIFY VIA GDS)
- Part number
- ~95400-S1 (VERIFY VIA GDS)
- Notes
- GDS programming + variant configuration. Controls lighting, locks, windows, Smart Key, power tailgate, PHEV-specific body functions (if PHEV). All variant codes in GDS to match VIN. VIN-tie verify after programming.
Smart Key ECU ~95480-S1 (VERIFY VIA GDS)
- Part number
- ~95480-S1 (VERIFY VIA GDS)
- Notes
- GDS + dealer authorization. All registered keys erased on replacement. All customer keys required. Verify all keys start vehicle.
Power Tailgate Module (if equipped)
- Notes
- GDS power tailgate initialization. Adjust open/close height via GDS.
TCU / TCM Transmission Modules
TCU - 8AT 8-Speed Automatic 95440-S1
- Part number
- 95440-S1
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Renesas SH72543
- Notes
- Requires DAS/GDS2 programming, TCU adaptation, shift relearn procedure, SP-IV ATF specification
TCU - 6AT 6-Speed Automatic 95440-S2
- Part number
- 95440-S2
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Infineon TC1797
- Notes
- Requires DAS/GDS2 programming, TCU adaptation, shift point calibration, SP-IV ATF specification
ABS / Brake Modules
ABS/ESC Module (HCU + ECU) ~58920-S1 (MANDO - VERIFY VIA GDS)
- Part number
- ~58920-S1 (MANDO - VERIFY VIA GDS)
- Notes
- GDS ABS/ESC initialization + power brake bleed. SAS zero-point calibration required after replacement or alignment. Drive 35+ mph straight on level road for SAS self-cal.
Steering Angle Sensor (SAS)
- Notes
- GDS SAS zero-point reset after alignment, steering work, or ABS/ESC replacement. Drive 35+ mph straight. ESC/VSM clears after SAS learning.
Wheel Speed Sensor - Front (each)
- Notes
- Active magnetic WSS. GDS DTC clear + road test 15+ mph.
Electronic Parking Brake (EPB)
- Notes
- GDS EPB service mode before pad swap. GDS EPB init after reassembly. Verify apply/release.
Other Modules (IPC, SAS)
Instrument Panel Cluster (IPC) 94013-S2010
- Part number
- 94013-S2010
- Cloning supported
- Yes
- Notes
- TM facelift IPC 10.25" digital cluster
Instrument Panel Cluster (IPC) 94013-S2020
- Part number
- 94013-S2020
- Cloning supported
- Yes
- Notes
- TM facelift IPC 12.3" fully digital
Instrument Panel Cluster (IPC) 94013-S2030
- Part number
- 94013-S2030
- Cloning supported
- Yes
- Notes
- TM PHEV IPC variant
Connectivity & Accessories
Hyundai Blue Link (Connected Services - expanded 2022)
- Notes
- Remote start, stolen vehicle locate, OTA software updates (expanded 2022). Active Blue Link subscription required. DCM replacement: GDS network module registration.
PHEV Charging Management (if equipped)
- Notes
- PHEV only. GDS OBC programming after replacement. Verify Level 1 and Level 2 charging function after service. HV safety protocols mandatory.
Rear Cross-Traffic Collision Avoidance (RCCA) (SHARED BSD RADAR ~99140, 99150-S1)
- Part number
- (SHARED BSD RADAR ~99140, 99150-S1)
- Notes
- RCCA via rear BSD radars. BSD procedure covers RCCA. Verify active in reverse with cross-path object.
Backup Camera (Rear View Monitor)
- Notes
- Standard on all Santa Fe 2022. GDS camera registration if replaced. Verify image and guidelines.
Surround View Monitor (SVM) - if equipped
- Notes
- GDS SVM initialization after camera replacement. Verify all four views clear and oriented.
ARCHITECTURE & CONNECTIVITY
Architecture & Connectivity
- Body Construction
- N3 Unibody - Advanced High-Strength Steel (AHSS)
- OBD Protocol
- ISO 15765-4 CAN (500 kbps)
- CAN Architecture
- Hyundai CAN architecture; OBD2 DLC ISO 15765-4 CAN
- Infotainment
- 8" (SE/SEL) or 10.25" (SEL Plus/Limited/Calligraphy); Hyundai Blue Link with expanded OTA (2022+); Apple CarPlay / Android Auto; PHEV: digital instrument cluster on PHEV trims
- OTA Capable
- Yes
- Infotainment Name
- Hyundai BlueLink
- ECU/TCM Unlocking
- Contact us
- ECU/TCM Flashing
- Confirmed
Reviewed coverage: 2022 - 1.6L T-GDi 16v FHEV (G4FT), 2.0L T-GDi 16v (G4KH), 2.2L CRDi (D4HB-4), 2.4L FWD (THETA).
Confirm the exact engine, ECU, and any prerequisite access method before service.
OPENPILOT / COMMA.AI
Openpilot Compatibility
Not Supported
Officially supported (openpilot master)
- Package
- SCC + LFA
- Hardware
- Comma 3X + Hyundai D/L harness
- Harness
- Hyundai D/L Harness
Includes Hybrid and PHEV. 2024+ new-gen not yet in tree.
FREQUENTLY ASKED QUESTIONS
FAQ
How much does ADAS calibration cost for a 2022 Hyundai Santa-Fe?
ADAS calibration pricing for a 2022 Hyundai Santa-Fe depends on which of its 6 documented systems need work after a repair. This vehicle is documented with Forward Camera (Monocular), Forward Radar (77GHz), Blind Spot Monitor Sensor - Left (BSM), Blind Spot Monitor Sensor - Right (BSM), and Highway Driving Assist (HDA). We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.
Can you reset the airbag light on a 2022 Hyundai Santa-Fe?
Yes. The 2022 Hyundai Santa-Fe uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: 80310-S2500. Mobile diagnosis and programming are available in DFW, and mail-in module service is available nationwide. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.
What is needed after replacing the windshield on a 2022 Hyundai Santa-Fe?
After windshield replacement on a 2022 Hyundai Santa-Fe, Forward Camera (Monocular) and Forward Radar (77GHz) rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in module service is available nationwide for eligible module work.
How long does a 2022 Hyundai Santa-Fe module service take?
Most 2022 Hyundai Santa-Fe onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 29 programmable modules documented in our database (7 ECU, 3 BCM, 2 TCU, 5 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module service is available nationwide.
Do you cover the 2022 Hyundai Santa-Fe on-site, or is this mail-in only?
We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, post-repair recoding, and supported module work). Mail-in module service is available nationwide. Quote the work and we will confirm the active service path for the 2022 Hyundai Santa-Fe. Do not ship a module unless support confirms next steps.
What kind of warranty do you offer on 2022 Hyundai Santa-Fe programming?
Every programming, cloning, and calibration job on the 2022 Hyundai Santa-Fe is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
Which modules on a 2022 Hyundai Santa-Fe can you actually service?
We program, clone, repair, or replace the full programmable-module stack on a 2022 Hyundai Santa-Fe. For this vehicle our database documents:
- 7 engine control (ECU/PCM)
- 2 transmission control (TCU/TCM)
- 3 body control (BCM and related)
- 5 ABS / brake control (EBCM)
- 3 immobilizer / security
- 2 key & fob
- 3 instrument cluster (IPC)
- 1 steering angle sensor (SAS)
- 6 ADAS module
Infotainment on this platform: Hyundai BlueLink. Send the VIN and the operations performed and we will confirm support and pricing.
Additional Module Part Numbers
Additional OEM-sourced part numbers for the 2022 Hyundai Santa-Fe covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.
- ECU / PCM Part Numbers
- 39171-2GTC0, 39171-2GTC1, 39171-2GTC5, 39171-2GTD0, 39171-2GTD1, 2.0T G4KH VARIANT
- BCM / Body Module Part Numbers
- ~95400-S1 (VERIFY VIA GDS), ~95480-S1 (VERIFY VIA GDS)
- TCU / TCM Part Numbers
- 95440-S1, 95440-S2
- SRS / Airbag Module Part Numbers
- 80310-S2500, 11256-06161, 11254-06161, 11254-06201, 80410-S2000, 80420-S2000, 80100-S2000-NNB, 13273-06001, 80410-S1000, 80420-S1000, 80100-S1500-NNB, 80100-S1500-SST
- ABS / EBCM Part Numbers
- 58920-S1
- Instrument Cluster (IPC) Part Numbers
- 94013-S2010, 94013-S2020, 94013-S2030
- Transmission Control Module (TCM) Part Numbers
- 95440-S1, 95440-S2
Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.
Different trim or build?
Send your VIN and we'll confirm exact module support and pricing in the quote response.
Hit a security wall? We've got the keys.
1-year unlimited warranty on every flash and calibration.
Shared module fitment
Vehicles sharing modules with the 2022 Hyundai Santa Fe
These vehicles use one or more of the same replacement modules indexed for this vehicle.
Finish the repair
Need help finishing this repair?
Get onsite help in Dallas-Fort Worth. Ask about same-day availability or a one-time remote session for eligible non-VSP work.
Factory programming software Explore one-time factory coding and programming. We confirm the software and procedure for your vehicle. Module programming & recovery Replacing a module or dealing with a failed programming attempt? Send the part numbers and fault scan for review. Onsite tools & equipment Bring in a technician or ask about hourly, daily and weekly rentals where licensing and equipment availability allow.