VIN / Build Split
VIN pos 4-8 identifies series/body/engine. GM WMI: 1G1 (Chevy car), 1GC (Chevy truck), 3GN (Chevy SUV). Position 8 = engine code. Position 10 = model year code.
Choose year/make/model, or paste a VIN to start a quote.
ADAS calibration, module programming, and security relearns
Standard trim configurations for 2015 Chevrolet Colorado; verify trim-specific options before ordering modules.
Expert ADAS calibration, module programming, and diagnostic recovery for the 2015 Chevrolet Colorado. On this vehicle we cover documented systems include Forward camera / lane or collision camera - if equipped, Forward radar / adaptive cruise - if equipped, and Parking, blind-zone, rear camera, or surround-view sensors - if equipped, this Second-generation Chevrolet Colorado midsize pickup platform; verify exact build by VIN platform vehicle, PK3/PK3+ / PEPS immobilizer support. Mobile across the DFW Metroplex; mail-in module work is temporarily unavailable.
VIN pos 4-8 identifies series/body/engine. GM WMI: 1G1 (Chevy car), 1GC (Chevy truck), 3GN (Chevy SUV). Position 8 = engine code. Position 10 = model year code.
This 2015 Chevrolet Colorado page documents 3 ADAS systems, including Forward camera / lane or collision camera - if equipped, Forward radar / adaptive cruise - if equipped, and Parking, blind-zone, rear camera, or surround-view sensors - if equipped.
View ADAS dataDocumented calibration triggers include Windshield, camera, radar, bumper, or body repair, BCM, ECM, EBCM, gateway, infotainment, or security module replacement, and Suspension, alignment, steering, brake, or chassis service. Use the ADAS tab for the full trigger list.
View triggersThis page indexes 17 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and IPC coverage.
View modulesThis page includes 8 gateway, immobilizer, or key-security records for this 2015 Chevrolet Colorado.
View securityCore Auto Logic supports exact-year diagnostics, ADAS calibration, module programming, and security-access planning for the 2015 Chevrolet Colorado using the documented systems and module data on this page.
Choose a sectionVIN-specific GM diagnostics and programming - Supported; ADAS and camera systems - if equipped - Conditional
Standard/available: Automatic Emergency Braking, Lane Change Alert, Following Distance Indicator, Front Pedestrian Braking, HD Rear Camera, Multi-Pro Camera System (available), Rear Cross Traffic Alert, Blind Spot Monitoring
VIN pos 4-8 identifies series/body/engine. GM WMI: 1G1 (Chevy car), 1GC (Chevy truck), 3GN (Chevy SUV). Position 8 = engine code. Position 10 = model year code.
11.3" diagonal touchscreen, Google built-in, Apple CarPlay + Android Auto, OTA capable via OnStar
CAN: GMLAN (HS-CAN + MS-CAN) with Ethernet backbone; OBD2 DLC Pin 6/14 HS-CAN 500 kbps
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
GM GDS2 / GM Tech2Win / GM MDI 2
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
OEM subscription required
Make-level OEM tool map plus exact-year gateway and ADAS fields.
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Tool subscription required
Service-level scanner-vendor source packet plus exact-year ADAS records.
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Bench programmer source packet plus exact-year module/security records.
Choose a section to view data
Documented module coverage for the 2015 Chevrolet Colorado. Counts reflect modules our techs have programmed or calibrated on this exact platform.
Forward camera, radar, surround-view and lane-keep recalibration after windshield, suspension or fascia work.
Open ADAS tabPowertrain reprogramming, calibration updates, replacement ECU configuration and security access.
Open Modules tabBody control module, gateway and accessory programming. Includes feature-bit reconfiguration.
Open Modules tabSecure gateway module identification, bypass workflow and security-access planning before programming.
Open Security tabTransmission control module reprogramming, adaptive learning reset and replacement TCM clone.
Open Modules tabCrash-data clear, hard-code reset and replacement airbag module configuration.
Open Modules tabABS / EBCM bleed support, replacement module coding and yaw-rate sensor calibration.
Open Modules tabImmobilizer modules, key/fob types, add-key + all-keys-lost (AKL) capability and security overview.
Open Security tabInstrument cluster cloning, steering angle sensor calibration and other supporting modules.
Open Modules tabInfotainment radio, surround view, remote start, trailer brake controller and other equipped systems.
Open Modules tabService events that require ADAS recalibration on this vehicle. Tap to see what triggers what.
Open ADAS tabNeed something not listed? Most undocumented modules can still be programmed.
Get a QuoteModule programming, setup, security relearn, and calibration requirements vary by year, trim, and option package. Verify exact equipment by VIN.
Forward camera, radar, parking, blind-zone, and surround-view systems require VIN-specific verification and GM service procedures.
Common Chevrolet Colorado issues we resolve on this platform: Forward camera / lane or collision camera - if equipped, Forward radar / adaptive cruise - if equipped, and Parking, blind-zone, rear camera, or surround-view sensors - if equipped recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - Second-generation Chevrolet Colorado midsize pickup platform; verify exact build by VIN platform uses GMLAN (HS-CAN + MS-CAN) with Ethernet backbone; OBD2 DLC Pin 6/14 HS-CAN 500 kbps. Key programming and immobilizer faults - PK3/PK3+ / PEPS immobilizer; all-keys-lost supported.
Standard/available: Automatic Emergency Braking, Lane Change Alert, Following Distance Indicator, Front Pedestrian Braking, HD Rear Camera, Multi-Pro Camera System (available), Rear Cross Traffic Alert, Blind Spot Monitoring
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Forward camera / lane or collision camera - if equipped | Forward Camera | - | Static or dynamic per GM service information | Conditional | GDS2 WORKFLOW | |
| Forward radar / adaptive cruise - if equipped | Radar | - | Static or dynamic per GM service information | Conditional | GDS2 WORKFLOW | |
| Parking, blind-zone, rear camera, or surround-view sensors - if equipped | Parking / blind-zone / camera | - | Setup or calibration per GM service information | Conditional | GDS2 WORKFLOW |
ADAS SYSTEM
Need this calibrated?
Get a quote for ADAS calibrationVerify installed ADAS equipment by VIN. Follow GM service information for static or dynamic calibration, target setup, sensor aiming, and post-repair DTC checks.
Replacement can require Techline Connect/SPS programming, GDS2/MDI setup, option configuration, immobilizer relearn, and network health checks. Verify the exact procedure by VIN.
Check SAS, yaw/lateral sensors, EBCM, radar/camera aim, and related DTCs after chassis or body work. Use GM service information for the model-year procedure.
GM key/security equipment varies by trim and build. Verify transponder, RKE, passive-entry, BCM/security, and Techline Connect/GDS2 procedure by VIN.
BCM, ECM, key/security, and immobilizer-related replacement procedures vary by trim and build. Verify the exact add-key, all-keys-lost, module setup, VIN learn, and relearn path in GM service information and Techline Connect/GDS2 by VIN.
ADAS calibration pricing for a 2015 Chevrolet Colorado depends on which of its 3 documented systems need work after a repair. This vehicle is documented with Forward camera / lane or collision camera - if equipped, Forward radar / adaptive cruise - if equipped, and Parking, blind-zone, rear camera, or surround-view sensors - if equipped. We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.
Yes. The 2015 Chevrolet Colorado uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: 87824330. Mobile diagnosis and programming are the active service path. Mail-in bench intake is temporarily unavailable. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.
After windshield replacement on a 2015 Chevrolet Colorado, Forward camera / lane or collision camera - if equipped, Forward radar / adaptive cruise - if equipped, and Parking, blind-zone, rear camera, or surround-view sensors - if equipped rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in intake is temporarily unavailable.
Most 2015 Chevrolet Colorado onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 22 programmable modules documented in our database (3 ECU, 2 BCM, 2 TCU, 2 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module intake is temporarily unavailable.
We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, key programming, IMMO pairing, post-repair recoding, and supported module work). Mail-in module intake is temporarily unavailable. Quote the work and we will confirm the active service path for the 2015 Chevrolet Colorado. Do not ship a module unless support confirms next steps.
Every programming, cloning, and calibration job on the 2015 Chevrolet Colorado is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
Yes - all-keys-lost is supported on the 2015 Chevrolet Colorado. Immobilizer generation on this platform: PK3/PK3+ / PEPS. Adding a key (with a working key already in hand) is also supported - typically faster and less expensive than an all-keys-lost reset. Submit the VIN and we will confirm the procedure and quote before scheduling.
We program, clone, repair, or replace the full programmable-module stack on a 2015 Chevrolet Colorado. For this vehicle our database documents:
Send the VIN and the operations performed and we will confirm support and pricing.
Additional OEM-sourced part numbers for the 2015 Chevrolet Colorado covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.
Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.
Send your VIN and we'll confirm exact module support and pricing in the quote response.
1-year unlimited warranty on every flash and calibration.
Shared module fitment
These vehicles use one or more of the same replacement modules indexed for this vehicle.