VIN / Build Split
VIN pos 4-8 identifies model/body/engine. Toyota WMI: 2T1 (Camry), 4T1 (Corolla/RAV4), 5TD (Highlander). Position 7 = engine. Position 10 = model year code.
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
DFW Mobile Service
DFW Serving Dallas / Fort Worth
2018 Toyota Tacoma Supported Services
2018 Toyota Tacoma
ADAS calibration, module programming, and security relearns
Trims: SR, SR5, TRD Sport, TRD Off-Road, Limited, TRD Pro. TSS standard on SR5+ (2018+).
Technical snapshot
- Platform AN120 (3rd Gen, pre-TNGA)
- CAN Architecture Multi-CAN bus (PT-CAN, Body-CAN, AVC-LAN); OBD2 DLC Pin 6/14 CAN 500kbps
- Security Toyota Smart Entry - AES-128 DST-AES; no OBD pin extraction; AKL requires TIS dealer authorization; max 8 keys
What do you need fixed?
Choose a service to start your quote.
OVERVIEW
Expert ADAS calibration, module programming, and diagnostic recovery for the 2018 Toyota Tacoma. On this vehicle we cover documented systems include Forward Camera (Monocular), Forward Radar (77GHz), and Pre-Collision System / AEB, this AN120 (3rd Gen, pre-TNGA) platform vehicle, Toyota Immobilizer Gen 4 (AES-128) immobilizer support. Mobile across the DFW Metroplex; mail-in module service is available nationwide.
Platform
AN120 (3rd Gen, pre-TNGA)
Production
2005-present
Trim Levels
Trims: SR, SR5, TRD Sport, TRD Off-Road, Limited, TRD Pro. TSS standard on SR5+ (2018+).
Drivetrain
RWD / 4WD
Engine
-
CAN Speed
Multi-CAN bus (PT-CAN, Body-CAN, AVC-LAN); OBD2 DLC Pin 6/14 CAN 500kbps
YEAR-SPECIFIC NOTES
Exact-year service summary for 2018 Toyota Tacoma
ADAS coverage
This 2018 Toyota Tacoma page documents 5 ADAS systems, including Forward Camera (Monocular), Forward Radar (77GHz), Pre-Collision System / AEB, and Lane Keep Assist / Lane Departure Warning (LKA/LDW).
View ADAS dataCalibration triggers
Documented calibration triggers include Windshield Replacement (TSS-P Equipped), Forward Camera Replacement, Skid Control ECU Replacement, and ECM Replacement. Use the ADAS tab for the full trigger list.
View triggersProgrammable modules
This page indexes 25 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and IPC coverage.
View modulesGateway and security
This page includes 5 gateway, immobilizer, or key-security records for this 2018 Toyota Tacoma.
View securityCore Auto Logic capability
Core Auto Logic supports exact-year diagnostics, ADAS calibration, module programming, and security-access planning for the 2018 Toyota Tacoma using the documented systems and module data on this page.
Choose a sectionWhat changes on this exact year
Feature availability
Toyota Safety Sense P (TSS-P) optional on SR5+ and Limited: Pre-Collision System - Available; Platform: AN120 (3rd Gen, pre-TNGA) - Confirmed
Driver-assist suite
Toyota Safety Sense P (TSS-P) optional on SR5+ and Limited: Pre-Collision System/Automatic Emergency Braking, Lane Departure Alert, Radar Cruise, Automatic High Beams. Verify trim and option packages before ADAS work.
VIN and build split
VIN pos 4-8 identifies model/body/engine. Toyota WMI: 2T1 (Camry), 4T1 (Corolla/RAV4), 5TD (Highlander). Position 7 = engine. Position 10 = model year code.
Infotainment context
Entune (7" standard on SR5+). USB/Bluetooth. No wireless CarPlay.
Network and access
CAN: Multi-CAN bus (PT-CAN, Body-CAN, AVC-LAN); OBD2 DLC Pin 6/14 CAN 500kbps
Tool access for this exact year
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
Factory scan, coding, and calibration access
Toyota Techstream / Toyota GTS+
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
ADAS scan, setup, and verification
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Bench cloning and chip-level recovery
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Choose a section to view data
SUPPORTED SYSTEMS
What we service on this vehicle
Documented module coverage for the 2018 Toyota Tacoma. Counts reflect modules our techs have programmed or calibrated on this exact platform.
ADAS Calibration
5 modules documented
Forward camera, radar, surround-view and lane-keep recalibration after windshield, suspension or fascia work.
Open ADAS tabEngine / ECU Programming
5 modules documented
Powertrain reprogramming, calibration updates, replacement ECU configuration and security access.
Open Modules tabBCM / Body Programming
3 modules documented
Body control module, gateway and accessory programming. Includes feature-bit reconfiguration.
Open Modules tabTCU / Transmission
3 modules documented
Transmission control module reprogramming, adaptive learning reset and replacement TCM clone.
Open Modules tabSRS / Airbag Reset
1 module documented
Crash-data clear, hard-code reset and replacement airbag module configuration.
Open Modules tabABS / Brake Module
6 modules documented
ABS / EBCM bleed support, replacement module coding and yaw-rate sensor calibration.
Open Modules tabIPC, SAS & Other Modules
4 modules documented
Instrument cluster cloning, steering angle sensor calibration and other supporting modules.
Open Modules tabConnectivity & Accessories
3 modules documented
Infotainment radio, surround view, remote start, trailer brake controller and other equipped systems.
Open Modules tabRecalibration Triggers
12 modules documented
Service events that require ADAS recalibration on this vehicle. Tap to see what triggers what.
Open ADAS tabNeed something not listed? Most undocumented modules can still be programmed.
Get a QuoteFeature availability 2
Toyota Safety Sense P (TSS-P) optional on SR5+ and Limited: Pre-Collision System
AvailableCalibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.
Platform: AN120 (3rd Gen, pre-TNGA)
ConfirmedVerify platform code matches when cross-referencing part numbers across model years.
WHAT WE RESOLVE
Common issues on this vehicle
Common Toyota Tacoma issues we resolve on this platform: Forward Camera (Monocular), Forward Radar (77GHz), Pre-Collision System / AEB, and Lane Keep Assist / Lane Departure Warning (LKA/LDW) recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - AN120 (3rd Gen, pre-TNGA) platform uses Multi-CAN bus (PT-CAN, Body-CAN, AVC-LAN); OBD2 DLC Pin 6/14 CAN 500kbps.
ADAS CALIBRATION MATRIX
ADAS systems on this vehicle
Toyota Safety Sense P (TSS-P) optional on SR5+ and Limited: Pre-Collision System/Automatic Emergency Braking, Lane Departure Alert, Radar Cruise, Automatic High Beams. Verify trim and option packages before ADAS work.
Scroll for part numbers and Details
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Forward Camera (Monocular) | Camera | ADAS | Static | YES | ~86790-04040 (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Forward Radar (77GHz) | Radar | ADAS | Static + Dynamic | YES | ~88210-04020 (GAS - (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Pre-Collision System / AEB | Software | ADAS | None | YES | - | |
| Lane Keep Assist / Lane Departure Warning (LKA/LDW) | Camera | ADAS | None | YES | - | |
| BSM (Blind Spot Monitor) | Radar | ADAS | Static + Dynamic | YES | - |
ADAS SYSTEM
YES Supported
Identification
- System type
- Module category
- Sensor location
Part Numbers
- OEM
- Alternative
Calibration & Triggers
- Calibration type
- Programming approach
- Requires PMI
- Trigger events
Technical Notes
- Chip / MCU
- Service notes
Need this calibrated?
Get a quote for ADAS calibration WHEN IS CALIBRATION REQUIRED?
Triggers for ADAS recalibration
Windshield Replacement (TSS-P Equipped)
Forward camera static cal: Techstream, AN120 target ~3.0m (confirm WSM - verify via TIS). Level surface. No cross-platform specs.
Forward Camera Replacement
Techstream init + static cal.
Skid Control ECU Replacement
Techstream ABS/VSC init + SAS zero-point. Drive 35+ mph level road.
ECM Replacement
Techstream prog + VIN reg + IMMO + throttle zero-point.
Smart Key ECU / Body ECU Replacement
TIS auth. All keys present.
Wheel Alignment / Suspension Work
SAS zero-point via Techstream. Drive 35+ mph.
Any Front-End Collision
Inspect and recalibrate forward camera after any front-end collision using Techstream.
Front Bumper Repair or Replacement
Forward radar angular alignment required after front bumper R&R. Use Techstream.
Forward Radar Replacement
Radar module replacement requires alignment/calibration using Techstream.
Rear Bumper Repair or Replacement
BSD radar alignment required after rear bumper R&R. Use Techstream.
BSM Sensor Replacement
Blind spot monitoring sensor replacement requires calibration using Techstream.
Mirror Replacement
If BSD sensor is mirror-integrated, recalibration required. Verify sensor location; use Techstream if applicable.
SRS Modules
SRS Control Unit 45130-04140-C0
- Part number
- 45130-04140-C0
- Location
- Under center console
- Manufacturer
- Denso
- Notes
- Requires Techstream or J2534 for SRS reset. DTC B1650 common post-crash. Battery disconnect and 90-second wait before removal.
ECU Modules
ECM - 2.7L 2TR-FE ~89661-04 (VERIFY VIA TIS)
- Part number
- ~89661-04 (VERIFY VIA TIS)
- Notes
- Techstream ECM prog + VIN reg + IMMO coding + throttle zero-point.
ECM - 3.5L 2GR-FKS ~89661-35 (VERIFY VIA TIS)
- Part number
- ~89661-35 (VERIFY VIA TIS)
- Notes
- V6. Techstream ECM prog + IMMO + throttle. Verify 4WD config.
TCM - 6-speed Auto ~89535-04 (VERIFY VIA TIS)
- Part number
- ~89535-04 (VERIFY VIA TIS)
- Notes
- Techstream init. Adaptive relearn 100+ miles.
BCM Modules
Body ECU ~89220-04060 (VERIFY VIA TIS)
- Part number
- ~89220-04060 (VERIFY VIA TIS)
- Notes
- Techstream init after replacement. Smart Key re-reg required.
Smart Key ECU ~89990-04060 (VERIFY VIA TIS)
- Part number
- ~89990-04060 (VERIFY VIA TIS)
- Notes
- TIS auth + Techstream. All keys erased. Max 8.
TCU / TCM Transmission Modules
TCU - A750F 6-Speed Auto 89530-04
- Part number
- 89530-04
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Renesas SH72543
- Notes
- Requires Toyota Techstream for initialization and adaptive learn. ATF WS spec. Shift relearn procedure via 10-mile drive cycle.
TCU - iMT 6-Speed Manual 89530-04
- Part number
- 89530-04
- Protocol / method
- Virgin Flash
- Coding required
- No
- Cloning supported
- No
- Chip / MCU
- Toyota Proprietary
- Notes
- Intelligent Manual Transmission control module. No programming required for clutch engagement control system.
TCU - iMT 6-Speed Manual 89530-04
- Part number
- 89530-04
- Protocol / method
- Virgin
- Coding required
- No
- Cloning supported
- No
- Chip / MCU
- Toyota Proprietary
- Notes
- Intelligent Manual Transmission control module. No programming required for clutch engagement control system.
ABS / Brake Modules
Skid Control ECU (ABS/VSC/TRAC) ~89540-04 (VERIFY VIA TIS)
- Part number
- ~89540-04 (VERIFY VIA TIS)
- Notes
- Techstream ABS/VSC init + SAS zero-point. Drive 35+ mph.
Wheel Speed Sensor - Front Left ~89542-04 (VERIFY VIA TIS)
- Part number
- ~89542-04 (VERIFY VIA TIS)
- Notes
- Active magnetic. DTC clear + road verify.
Wheel Speed Sensor - Front Right ~89543-04 (VERIFY VIA TIS)
- Part number
- ~89543-04 (VERIFY VIA TIS)
- Notes
- Same.
Wheel Speed Sensor - Rear Left ~89546-04 (VERIFY VIA TIS)
- Part number
- ~89546-04 (VERIFY VIA TIS)
- Notes
- Same.
Wheel Speed Sensor - Rear Right ~89545-04 (VERIFY VIA TIS)
- Part number
- ~89545-04 (VERIFY VIA TIS)
- Notes
- Same.
Other Modules (IPC, SAS)
Instrument Panel Cluster (IPC) 83800-04F00
- Part number
- 83800-04F00
- Cloning supported
- Yes
- Notes
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Instrument Panel Cluster (IPC) 83800-04F10
- Part number
- 83800-04F10
- Cloning supported
- Yes
- Notes
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Steering Angle Sensor (SAS)
- Coding required
- Yes
- Notes
- INTEGRATED (clock spring / steering column module
Steering Angle Sensor (SAS)
- Coding required
- Yes
- Notes
- cross-year extension)
Connectivity & Accessories
Backup Camera
- Notes
- Standard on higher trims. Techstream reg if replaced.
ARCHITECTURE & CONNECTIVITY
Architecture & Connectivity
- Body Construction
- Body-on-frame; high-strength steel ladder frame
- OBD Protocol
- ISO 15765-4 CAN (500 kbps)
- CAN Architecture
- Multi-CAN bus (PT-CAN, Body-CAN, AVC-LAN); OBD2 DLC Pin 6/14 CAN 500kbps
- Infotainment
- Entune (7" standard on SR5+). USB/Bluetooth. No wireless CarPlay.
- OTA Capable
- No
- ECU/TCM Unlocking
- Contact us
- ECU/TCM Flashing
- Confirmed
Reviewed coverage: 2018 - 2.7L (2TRFE), 2.7L 4x4 (2TRFE).
Confirm the exact engine, ECU, and any prerequisite access method before service.
FREQUENTLY ASKED QUESTIONS
FAQ
How much does ADAS calibration cost for a 2018 Toyota Tacoma?
ADAS calibration pricing for a 2018 Toyota Tacoma depends on which of its 5 documented systems need work after a repair. This vehicle is documented with Forward Camera (Monocular), Forward Radar (77GHz), Pre-Collision System / AEB, Lane Keep Assist / Lane Departure Warning (LKA/LDW), and BSM (Blind Spot Monitor). We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.
Can you reset the airbag light on a 2018 Toyota Tacoma?
Yes. The 2018 Toyota Tacoma uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: 45130-04140-C0. Mobile diagnosis and programming are available in DFW, and mail-in module service is available nationwide. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.
What is needed after replacing the windshield on a 2018 Toyota Tacoma?
After windshield replacement on a 2018 Toyota Tacoma, Forward Camera (Monocular), Forward Radar (77GHz), Pre-Collision System / AEB, and Lane Keep Assist / Lane Departure Warning (LKA/LDW) rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in module service is available nationwide for eligible module work.
How long does a 2018 Toyota Tacoma module service take?
Most 2018 Toyota Tacoma onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 26 programmable modules documented in our database (5 ECU, 3 BCM, 2 TCU, 6 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module service is available nationwide.
Do you cover the 2018 Toyota Tacoma on-site, or is this mail-in only?
We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, post-repair recoding, and supported module work). Mail-in module service is available nationwide. Quote the work and we will confirm the active service path for the 2018 Toyota Tacoma. Do not ship a module unless support confirms next steps.
What kind of warranty do you offer on 2018 Toyota Tacoma programming?
Every programming, cloning, and calibration job on the 2018 Toyota Tacoma is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
Which modules on a 2018 Toyota Tacoma can you actually service?
We program, clone, repair, or replace the full programmable-module stack on a 2018 Toyota Tacoma. For this vehicle our database documents:
- 5 engine control (ECU/PCM)
- 2 transmission control (TCU/TCM)
- 3 body control (BCM and related)
- 6 ABS / brake control (EBCM)
- 3 immobilizer / security
- 2 key & fob
- 2 instrument cluster (IPC)
- 2 steering angle sensor (SAS)
- 5 ADAS module
Send the VIN and the operations performed and we will confirm support and pricing.
Additional Module Part Numbers
Additional OEM-sourced part numbers for the 2018 Toyota Tacoma covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.
- ADAS Module Part Numbers
- 88210-04020 (DENSO 77GHZ FWD RADAR, 86790-04020 (DENSO MONO CAMERA PCS)
- ECU / PCM Part Numbers
- 89661-04B00 (2.7L 2TR-FE I4, AN120 TACOMA), 89661-35C00 (3.5L 2GR-FKS V6)
- BCM / Body Module Part Numbers
- ~89220-04060 (VERIFY VIA TIS), ~89990-04060 (VERIFY VIA TIS)
- TCU / TCM Part Numbers
- 89530-04
- SRS / Airbag Module Part Numbers
- 45130-04140-C0
- ABS / EBCM Part Numbers
- 44050-04040 (4WD), 44050-04050 (2WD)
- Instrument Cluster (IPC) Part Numbers
- 83800-04F00, 83800-04F10
- Transmission Control Module (TCM) Part Numbers
- 89530-04
Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.
Different trim or build?
Send your VIN and we'll confirm exact module support and pricing in the quote response.
Hit a security wall? We've got the keys.
1-year unlimited warranty on every flash and calibration.
Shared module fitment
Vehicles sharing modules with the 2018 Toyota Tacoma
These vehicles use one or more of the same replacement modules indexed for this vehicle.
Finish the repair
Need help finishing this repair?
Get onsite help in Dallas-Fort Worth. Ask about same-day availability or a one-time remote session for eligible non-VSP work.
Techstream / GTS+ Explore one-time factory coding and programming. We confirm the software and procedure for your vehicle. Module programming & recovery Replacing a module or dealing with a failed programming attempt? Send the part numbers and fault scan for review. Onsite tools & equipment Bring in a technician or ask about hourly, daily and weekly rentals where licensing and equipment availability allow.