3,200+ Vehicles Supported

1-Year Unlimited Guarantee

DFW Mobile Service

DFW Serving Dallas / Fort Worth

2021 Ferrari Roma Supported Services

2021 Ferrari Roma

ADAS calibration, module programming, and security relearns

Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.

Technical snapshot

Platform F169 (Ferrari Roma GT platform)
CAN Architecture Ferrari proprietary multi-CAN architecture; MOST (infotainment); SD3 interface required for full access
Security Ferrari factory-auth IMMO - SD3 only; no aftermarket key programming; AKL factory-only

Get a Quote See Supported Modules

What do you need fixed?

Choose a service to start your quote.

Fix my ECUEngine computer Fix my TCMTransmission computer Repair my BCMBody electronics Code my vehicleCustom coding Repair a moduleElectronic module repair

OVERVIEW

Expert ADAS calibration, module programming, and diagnostic recovery for the 2021 Ferrari Roma. On this vehicle we cover documented systems include Forward Camera - Ferrari Vision Assist (Lane Keeping, Traffic Sign, AEB), Forward Radar (77GHz), and Blind Spot Monitor (BSD - Rear Radars), this F169 (Ferrari Roma GT platform) platform vehicle, Ferrari factory-auth IMMO (SD3) immobilizer support, Ferrari Infotainment infotainment programming. Mobile across the DFW Metroplex; mail-in module service is available nationwide.

Platform

F169 (Ferrari Roma GT platform)

Production

2021-present

Trim Levels

Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.

Drivetrain

RWD

Engine

CAN Speed

Ferrari proprietary multi-CAN architecture; MOST (infotainment); SD3 interface required for full access

YEAR-SPECIFIC NOTES

VIN / Build Split

VIN pos 4-8 identifies model/body/engine. Ferrari WMI: ZFF. Position 4-6 = model code. Position 10 = model year code.

Infotainment

Ferrari Infotainment

Wireless Support

CarPlay: Yes

SERVICE SNAPSHOT

Exact-year service summary for 2021 Ferrari Roma

ADAS coverage

This 2021 Ferrari Roma page documents 5 ADAS systems, including Forward Camera - Ferrari Vision Assist (Lane Keeping, Traffic Sign, AEB), Forward Radar (77GHz), Blind Spot Monitor (BSD - Rear Radars), and Park Distance Control (PDC).

View ADAS data

Calibration triggers

Documented calibration triggers include Windshield Replacement, Front Bumper Repair, Rear Bumper Repair, and Any Collision. Use the ADAS tab for the full trigger list.

View triggers

Programmable modules

This page indexes 12 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and IPC coverage.

View modules

Gateway and security

This page includes 2 gateway, immobilizer, or key-security records for this 2021 Ferrari Roma.

View security

Core Auto Logic capability

Core Auto Logic supports exact-year diagnostics, ADAS calibration, module programming, and security-access planning for the 2021 Ferrari Roma using the documented systems and module data on this page.

Choose a section

EXACT-YEAR DIFFERENTIATORS

What changes on this exact year

Feature availability

Ferrari Vision Assist: Adaptive Cruise Control, Automatic Emergency Braking, Lan - Available; Platform: F169 (Ferrari Roma GT platform) - Confirmed

Driver-assist suite

Ferrari Vision Assist: Adaptive Cruise Control, Automatic Emergency Braking, Lane Keeping, Traffic Sign, Blind Spot Detection, Park Distance Control; Rear Camera

VIN and build split

VIN pos 4-8 identifies model/body/engine. Ferrari WMI: ZFF. Position 4-6 = model code. Position 10 = model year code.

Infotainment context

Ferrari Infotainment; Ferrari Digital Interface: 8.4-inch touchscreen; Apple CarPlay; eManettino steering wheel controls

Connectivity notes

Wireless CarPlay: Yes

Network and access

CAN: Ferrari proprietary multi-CAN architecture; MOST (infotainment); SD3 interface required for full access

TOOL ACCESS MATRIX

Tool access for this exact year

Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.

ADAS scan, setup, and verification

Autel, Launch Tech, Topdon

Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.

Bench cloning and chip-level recovery

Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog

Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.

Bench/chip-level only

Choose a section to view data

SUPPORTED SYSTEMS

What we service on this vehicle

Documented module coverage for the 2021 Ferrari Roma. Counts reflect modules our techs have programmed or calibrated on this exact platform.

ADAS Calibration

5 modules documented

Forward camera, radar, surround-view and lane-keep recalibration after windshield, suspension or fascia work.

Open ADAS tab

Engine / ECU Programming

2 modules documented

Powertrain reprogramming, calibration updates, replacement ECU configuration and security access.

Open Modules tab

BCM / Body Programming

2 modules documented

Body control module, gateway and accessory programming. Includes feature-bit reconfiguration.

Open Modules tab

TCU / Transmission

1 module documented

Transmission control module reprogramming, adaptive learning reset and replacement TCM clone.

Open Modules tab

SRS / Airbag Reset

1 module documented

Crash-data clear, hard-code reset and replacement airbag module configuration.

Open Modules tab

ABS / Brake Module

1 module documented

ABS / EBCM bleed support, replacement module coding and yaw-rate sensor calibration.

Open Modules tab

IPC, SAS & Other Modules

2 modules documented

Instrument cluster cloning, steering angle sensor calibration and other supporting modules.

Open Modules tab

Connectivity & Accessories

3 modules documented

Infotainment radio, surround view, remote start, trailer brake controller and other equipped systems.

Open Modules tab

Recalibration Triggers

9 modules documented

Service events that require ADAS recalibration on this vehicle. Tap to see what triggers what.

Open ADAS tab

Need something not listed? Most undocumented modules can still be programmed.

Get a Quote

Feature availability 2

Ferrari Vision Assist: Adaptive Cruise Control, Automatic Emergency Braking, Lan

Available

Calibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.

Platform: F169 (Ferrari Roma GT platform)

Confirmed

Verify platform code matches when cross-referencing part numbers across model years.

WHAT WE RESOLVE

Common issues on this vehicle

Common Ferrari Roma issues we resolve on this platform: Forward Camera - Ferrari Vision Assist (Lane Keeping, Traffic Sign, AEB), Forward Radar (77GHz), Blind Spot Monitor (BSD - Rear Radars), and Park Distance Control (PDC) recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - F169 (Ferrari Roma GT platform) platform uses Ferrari proprietary multi-CAN architecture; MOST (infotainment); SD3 interface required for full access.

ADAS CALIBRATION MATRIX

ADAS systems on this vehicle

Ferrari Vision Assist: Adaptive Cruise Control, Automatic Emergency Braking, Lane Keeping, Traffic Sign, Blind Spot Detection, Park Distance Control; Rear Camera

Scroll for part numbers and Details

System	Type	Category	Cal. Type	Supported	Part #
Forward Camera - Ferrari Vision Assist (Lane Keeping, Traffic Sign, AEB)	Forward Camera	Camera	Static	YES	~313920 (VERIFY VIA OUR DIAGNOSTIC SOFTWARE)
Forward Radar (77GHz)	Front Radar	Radar	Static	YES	~313921 (VERIFY VIA OUR DIAGNOSTIC SOFTWARE)
Blind Spot Monitor (BSD - Rear Radars)	Side Radar	Radar	Static + Dynamic	YES	~313922 (L), 313923 (R) (VERIFY VIA OUR DIAGNOSTIC SOFTWARE)
Park Distance Control (PDC)	Ultrasonic	Ultrasonic	None	YES	~313924 (VERIFY VIA OUR DIAGNOSTIC SOFTWARE)
Surround View / Camera Reversing Aid	Rear Camera	Camera	Static	YES	~313925 (VERIFY VIA OUR DIAGNOSTIC SOFTWARE)

WHEN IS CALIBRATION REQUIRED?

Triggers for ADAS recalibration

Windshield Replacement Affected: Forward Camera (Vision Assist, AEB, Lane Keeping)

Ferrari SD3 guided static calibration required. OEM Ferrari Roma windshield only - very steep rake. SD3 calibration target per Roma WSM. Windshield R&R on Roma requires Ferrari tooling for trim removal.

Front Bumper Repair Affected: Front Radar (ACC, AEB), Front PDC

Ferrari SD3 radar alignment. Composite bumper - inspect radar bracket. Vehicle at curb weight. SD3 guided.

Rear Bumper Repair Affected: BSD Rear Radars, Rear PDC, Rear Camera

Ferrari SD3 BSD initialization. Rear camera calibration if license plate surround disturbed. PDC coding if sensors replaced.

Any Collision Affected: ACM, all ADAS sensors, deployed airbags (including door-bolster bags)

Full Ferrari SD3 scan. ACM crash clear or replace with factory authorization. Inspect door airbag routing. All ADAS recalibrate. Factory-only replacement parts.

Any Module Replacement Affected: All modules

Ferrari SD3 factory authorization required. No clone. Battery tender mandatory.

Forward Camera Replacement

Camera module replacement requires full recalibration using OEM scan tool.

Forward Radar Replacement

Radar module replacement requires alignment/calibration using OEM scan tool.

BSM Sensor Replacement

Blind spot monitoring sensor replacement requires calibration using OEM scan tool.

Mirror Replacement

Surround view mirror camera recalibration required after mirror R&R. Use OEM scan tool.

SRS Modules

Airbag Control Module (ACM) ~313926 (VERIFY VIA FERRARI SD3 VIN)

Part number: ~313926 (VERIFY VIA FERRARI SD3 VIN)
Location: Under center console, floor tunnel
Manufacturer: Continental / Autoliv
Chip / MCU: Continental SRS ECU
Notes: Ferrari SD3 crash clear and DTC reset. Hard deployment: physical inspection mandatory before crash clear - replace if deformed. New ACM: Ferrari SD3 VIN coding and factory authorization. Factory-only parts. Roma side-bolster airbags are door-integrated - verify door airbag mounting after any door panel removal.

Request help with this module

ECU Modules

ECU - 3.9L twin-turbo V8 F154 (612hp) ~313930 (VERIFY VIA FERRARI SD3 VIN)

Part number: ~313930 (VERIFY VIA FERRARI SD3 VIN)
Protocol / method: Professional Diagnostic Tool
Coding required: Yes
Cloning supported: No
Chip / MCU: Bosch MED17 (Ferrari F154 variant)
Notes: Ferrari SD3 required for ECU flash. Factory authorization mandatory. No clone. Battery tender at 14.4V throughout. F154 twin-turbo V8: throttle adaptation, fuel trim adaptation, and turbo actuator calibration required post-programming. SD3 programming session 60-120 minutes.

Request help with this module

DCT - 8-speed Dual-Clutch Transmission Control ~313931 (VERIFY VIA FERRARI SD3 VIN)

Part number: ~313931 (VERIFY VIA FERRARI SD3 VIN)
Protocol / method: Professional Diagnostic Tool
Coding required: Yes
Cloning supported: No
Chip / MCU: Getrag / Ferrari DCT TCU
Notes: Ferrari SD3 TCU flash and DCT clutch learning at operating temperature. Factory authorization. Not interchangeable with Purosangue TCU (AWD vs RWD spec).

Request help with this module

BCM Modules

Central Electronic Module (CEM) ~313928 (VERIFY VIA FERRARI SD3 VIN)

Part number: ~313928 (VERIFY VIA FERRARI SD3 VIN)
Security: ferrari_crypto
Coding required: Yes
Cloning supported: No
Notes: Ferrari SD3 VIN coding. No clone. Factory-only. Online factory authorization session. 60-120 min programming.

Request help with this module

Door Control Module (L/R) ~313929 (VERIFY VIA FERRARI SD3 VIN)

Part number: ~313929 (VERIFY VIA FERRARI SD3 VIN)
Security: ferrari_crypto
Coding required: Yes
Cloning supported: No
Notes: Ferrari SD3 coding required. Window normalization and door-integrated airbag coding post-replacement.

Request help with this module

TCU / TCM Transmission Modules

TCU - F1 DCT 8-Speed Auto 311055

Part number: 311055
Protocol / method: Bench
Coding required: Yes
Cloning supported: No
Chip / MCU: Infineon Tricore TC297
Notes: Ferrari F1 dual-clutch 8-speed. Requires Ferrari SD3 diagnostic tool for programming. TCU bench access via JTAG. VIN-locked module. Dealer-only service.

Request help with this module

ABS / Brake Modules

ABS/ESC Module (Bosch - Ferrari integration) ~313932 (VERIFY VIA FERRARI SD3 VIN)

Part number: ~313932 (VERIFY VIA FERRARI SD3 VIN)
Cloning supported: No
Notes: Ferrari SD3 coding and automated bleed required. No clone. Steering angle sensor recalibration via SD3. MR damper system integrates with ESC on Roma - verify damper control post-replacement if equipped.

Request help with this module

Other Modules (IPC, SAS)

Instrument Panel Cluster (IPC) FERRARI F169 PROPRIETARY IPC

Part number: FERRARI F169 PROPRIETARY IPC
Cloning supported: Yes
Notes: IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.

Request help with this module

Steering Angle Sensor (SAS)

Coding required: Yes
Notes: - PN not in Mopar catalog

Request help with this module

Connectivity & Accessories

Ferrari Infotainment (Roma 8.4-inch touchscreen) ~313933 (VERIFY VIA FERRARI SD3 VIN)

Part number: ~313933 (VERIFY VIA FERRARI SD3 VIN)
Notes: Ferrari SD3 coding and SVM required after replacement. Roma 8.4-inch display. Apple CarPlay standard. Factory authorization.

Request help with this module

Instrument Cluster - Ferrari eManettino System ~313934 (VERIFY VIA FERRARI SD3 VIN)

Part number: ~313934 (VERIFY VIA FERRARI SD3 VIN)
Notes: Ferrari SD3 VIN coding. Mileage via SD3. Roma has a distinctive eManettino control on steering wheel - cluster coding must restore manettino settings.

Request help with this module

Magnetorheological Adaptive Dampers (if equipped) ~313935 (VERIFY VIA FERRARI SD3 VIN)

Part number: ~313935 (VERIFY VIA FERRARI SD3 VIN)
Notes: Ferrari SD3 damper calibration after module replacement. OEM Ferrari MR dampers only. Available on Sport trim and above.

Request help with this module

ARCHITECTURE & CONNECTIVITY

Architecture & Connectivity

Body Construction: Aluminum space frame with aluminum and composite body panels; Ferrari Maranello body shop
OBD Protocol: CAN-based (Ferrari proprietary - generic OBD tools cannot access Ferrari modules)
CAN Architecture: Ferrari proprietary multi-CAN architecture; MOST (infotainment); SD3 interface required for full access
Infotainment: Ferrari Digital Interface: 8.4-inch touchscreen; Apple CarPlay; eManettino steering wheel controls
OTA Capable: No
Infotainment Name: Ferrari Infotainment
Wireless CarPlay: Yes
ECU/TCM Unlocking: Contact us
ECU/TCM Flashing: Contact us

OPENPILOT / COMMA.AI

Openpilot Compatibility

Not Supported

Not supported - ferrari not in openpilot support tree

Not in openpilot support tree as of April 2026. Ferrari not in openpilot support tree. Exotic brand not ported.

FREQUENTLY ASKED QUESTIONS

FAQ

How much does ADAS calibration cost for a 2021 Ferrari Roma?

ADAS calibration pricing for a 2021 Ferrari Roma depends on which of its 5 documented systems need work after a repair. This vehicle is documented with Forward Camera - Ferrari Vision Assist (Lane Keeping, Traffic Sign, AEB), Forward Radar (77GHz), Blind Spot Monitor (BSD - Rear Radars), Park Distance Control (PDC), and Surround View / Camera Reversing Aid. We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.

Can you reset the airbag light on a 2021 Ferrari Roma?

Yes. The 2021 Ferrari Roma uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: ~313926 (VERIFY VIA FERRARI SD3 VIN). Mobile diagnosis and programming are available in DFW, and mail-in module service is available nationwide. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.

What is needed after replacing the windshield on a 2021 Ferrari Roma?

After windshield replacement on a 2021 Ferrari Roma, Forward Camera - Ferrari Vision Assist (Lane Keeping, Traffic Sign, AEB), Forward Radar (77GHz), and Surround View / Camera Reversing Aid rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in module service is available nationwide for eligible module work.

How long does a 2021 Ferrari Roma module service take?

Most 2021 Ferrari Roma onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 12 programmable modules documented in our database (2 ECU, 2 BCM, 1 TCU, 1 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module service is available nationwide.

Do you cover the 2021 Ferrari Roma on-site, or is this mail-in only?

We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, post-repair recoding, and supported module work). Mail-in module service is available nationwide. Quote the work and we will confirm the active service path for the 2021 Ferrari Roma. Do not ship a module unless support confirms next steps.

What kind of warranty do you offer on 2021 Ferrari Roma programming?

Every programming, cloning, and calibration job on the 2021 Ferrari Roma is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.

Which modules on a 2021 Ferrari Roma can you actually service?

We program, clone, repair, or replace the full programmable-module stack on a 2021 Ferrari Roma. For this vehicle our database documents:

2 engine control (ECU/PCM)
1 transmission control (TCU/TCM)
2 body control (BCM and related)
1 ABS / brake control (EBCM)
1 immobilizer / security
1 key & fob
1 instrument cluster (IPC)
1 steering angle sensor (SAS)
5 ADAS module

Infotainment on this platform: Ferrari Infotainment. Send the VIN and the operations performed and we will confirm support and pricing.

OTHER MODEL YEARS

2026 2025 2024 2023 2022 2021

OTHER FERRARI MODELS

Purosangue

Additional Module Part Numbers

Additional OEM-sourced part numbers for the 2021 Ferrari Roma covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.

ADAS Module Part Numbers: 313920, 313921, 313922 (L), 313923 (R), 313924, 313925
ECU / PCM Part Numbers: 313930, 313931, NOT INTERCHANGEABLE WITH PUROSANGUE) (VERIFY VIA FERRARI SD3
BCM / Body Module Part Numbers: ~313928 (VERIFY VIA FERRARI SD3 VIN), ~313929 (VERIFY VIA FERRARI SD3 VIN)
TCU / TCM Part Numbers: 311055
SRS / Airbag Module Part Numbers: 313926
ABS / EBCM Part Numbers: 313932
Instrument Cluster (IPC) Part Numbers: FERRARI F169 PROPRIETARY IPC
Transmission Control Module (TCM) Part Numbers: 311055

Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.