VIN / Build Split
VIN pos 4-8 identifies model/body/engine. Ferrari WMI: ZFF. Position 4-6 = model code. Position 10 = model year code.
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
DFW Mobile Service
DFW Serving Dallas / Fort Worth
2026 Ferrari Roma Supported Services
2026 Ferrari Roma
ADAS calibration, module programming, and security relearns
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Technical snapshot
- Platform F169 (Ferrari Roma GT platform)
- CAN Architecture Ferrari proprietary multi-CAN architecture; MOST (infotainment); SD3 interface required for full access
- Security Ferrari factory-auth IMMO - SD3 only; no aftermarket key programming; AKL factory-only
What do you need fixed?
Choose a service to start your quote.
OVERVIEW
Expert ADAS calibration, module programming, and diagnostic recovery for the 2026 Ferrari Roma. On this vehicle we cover documented systems include Forward Camera - Ferrari Vision Assist, Forward Radar (77GHz), and Blind Spot Monitor / Rear Lateral Radar, this F169 (Ferrari Roma GT platform) platform vehicle, Ferrari Proxi Alignment immobilizer support, Ferrari Infotainment infotainment programming. Mobile across the DFW Metroplex; mail-in module service is available nationwide.
Platform
F169 (Ferrari Roma GT platform)
Production
2021-present
Trim Levels
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Drivetrain
RWD
Engine
-
CAN Speed
Ferrari proprietary multi-CAN architecture; MOST (infotainment); SD3 interface required for full access
YEAR-SPECIFIC NOTES
Infotainment
Ferrari Infotainment
Wireless Support
CarPlay: Yes / Android Auto: Yes
Exact-year service summary for 2026 Ferrari Roma
ADAS coverage
This 2026 Ferrari Roma page documents 6 ADAS systems, including Forward Camera - Ferrari Vision Assist, Forward Radar (77GHz), Blind Spot Monitor / Rear Lateral Radar, and 360-Degree Surround View Camera System.
View ADAS dataCalibration triggers
Documented calibration triggers include Windshield Replacement, Front Bumper Repair, Rear Bumper Repair, and Any Collision. Use the ADAS tab for the full trigger list.
View triggersProgrammable modules
This page indexes 13 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and IPC coverage.
View modulesGateway and security
This page includes 2 gateway, immobilizer, or key-security records for this 2026 Ferrari Roma.
View securityCore Auto Logic capability
Core Auto Logic supports exact-year diagnostics, ADAS calibration, module programming, and security-access planning for the 2026 Ferrari Roma using the documented systems and module data on this page.
Choose a sectionWhat changes on this exact year
Feature availability
Ferrari Vision Assist: Adaptive Cruise Control, Automatic Emergency Braking, Lan - Available; Platform: F169 (Ferrari Roma GT platform) - Confirmed
Driver-assist suite
Ferrari Vision Assist: Adaptive Cruise Control, Automatic Emergency Braking, Lane Keeping, Traffic Sign, Blind Spot Detection, Park Distance Control; Rear Camera
VIN and build split
VIN pos 4-8 identifies model/body/engine. Ferrari WMI: ZFF. Position 4-6 = model code. Position 10 = model year code.
Infotainment context
Ferrari Infotainment; Ferrari Digital Interface: 8.4-inch touchscreen; Apple CarPlay; eManettino steering wheel controls
Connectivity notes
Wireless CarPlay: Yes; Wireless Android Auto: Yes
Network and access
CAN: Ferrari proprietary multi-CAN architecture; MOST (infotainment); SD3 interface required for full access
Tool access for this exact year
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
ADAS scan, setup, and verification
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Bench cloning and chip-level recovery
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Choose a section to view data
SUPPORTED SYSTEMS
What we service on this vehicle
Documented module coverage for the 2026 Ferrari Roma. Counts reflect modules our techs have programmed or calibrated on this exact platform.
ADAS Calibration
6 modules documented
Forward camera, radar, surround-view and lane-keep recalibration after windshield, suspension or fascia work.
Open ADAS tabEngine / ECU Programming
2 modules documented
Powertrain reprogramming, calibration updates, replacement ECU configuration and security access.
Open Modules tabBCM / Body Programming
2 modules documented
Body control module, gateway and accessory programming. Includes feature-bit reconfiguration.
Open Modules tabTCU / Transmission
1 module documented
Transmission control module reprogramming, adaptive learning reset and replacement TCM clone.
Open Modules tabSRS / Airbag Reset
2 modules documented
Crash-data clear, hard-code reset and replacement airbag module configuration.
Open Modules tabABS / Brake Module
1 module documented
ABS / EBCM bleed support, replacement module coding and yaw-rate sensor calibration.
Open Modules tabIPC, SAS & Other Modules
2 modules documented
Instrument cluster cloning, steering angle sensor calibration and other supporting modules.
Open Modules tabConnectivity & Accessories
3 modules documented
Infotainment radio, surround view, remote start, trailer brake controller and other equipped systems.
Open Modules tabRecalibration Triggers
9 modules documented
Service events that require ADAS recalibration on this vehicle. Tap to see what triggers what.
Open ADAS tabNeed something not listed? Most undocumented modules can still be programmed.
Get a QuoteFeature availability 2
Ferrari Vision Assist: Adaptive Cruise Control, Automatic Emergency Braking, Lan
AvailableCalibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.
Platform: F169 (Ferrari Roma GT platform)
ConfirmedVerify platform code matches when cross-referencing part numbers across model years.
WHAT WE RESOLVE
Common issues on this vehicle
Common Ferrari Roma issues we resolve on this platform: Forward Camera - Ferrari Vision Assist, Forward Radar (77GHz), Blind Spot Monitor / Rear Lateral Radar, and 360-Degree Surround View Camera System recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - F169 (Ferrari Roma GT platform) platform uses Ferrari proprietary multi-CAN architecture; MOST (infotainment); SD3 interface required for full access.
ADAS CALIBRATION MATRIX
ADAS systems on this vehicle
Ferrari Vision Assist: Adaptive Cruise Control, Automatic Emergency Braking, Lane Keeping, Traffic Sign, Blind Spot Detection, Park Distance Control; Rear Camera
Scroll for part numbers and Details
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Forward Camera - Ferrari Vision Assist | Forward Camera | Camera | Static | YES | - | |
| Forward Radar (77GHz) | Front Radar | Radar | Static | YES | - | |
| Blind Spot Monitor / Rear Lateral Radar | Side Radar | Radar | Static + Dynamic | YES | - | |
| 360-Degree Surround View Camera System | Forward Camera | Camera | Static | YES | - | |
| Park Distance Control (PDC) | Ultrasonic | Ultrasonic | None | YES | - | |
| Rear-Wheel Steering System | Other | Other | Static | YES | - |
ADAS SYSTEM
YES Supported
Identification
- System type
- Module category
- Sensor location
Part Numbers
- OEM
- Alternative
Calibration & Triggers
- Calibration type
- Programming approach
- Requires PMI
- Trigger events
Technical Notes
- Chip / MCU
- Service notes
Need this calibrated?
Get a quote for ADAS calibration WHEN IS CALIBRATION REQUIRED?
Triggers for ADAS recalibration
Windshield Replacement Affected: Forward Camera (Vision Assist, AEB, Lane Keeping)
Ferrari SD3 guided static calibration required. OEM Ferrari Roma windshield only - very steep rake. SD3 calibration target per Roma WSM. Windshield R&R on Roma requires Ferrari tooling for trim removal.
Front Bumper Repair Affected: Front Radar (ACC, AEB), Front PDC
Ferrari SD3 radar alignment. Composite bumper - inspect radar bracket. Vehicle at curb weight. SD3 guided.
Rear Bumper Repair Affected: BSD Rear Radars, Rear PDC, Rear Camera
Ferrari SD3 BSD initialization. Rear camera calibration if license plate surround disturbed. PDC coding if sensors replaced.
Any Collision Affected: ACM, all ADAS sensors, deployed airbags (including door-bolster bags)
Full Ferrari SD3 scan. ACM crash clear or replace with factory authorization. Inspect door airbag routing. All ADAS recalibrate. Factory-only replacement parts.
Any Module Replacement Affected: All modules
Ferrari SD3 factory authorization required. No clone. Battery tender mandatory.
Forward Camera Replacement
Camera module replacement requires full recalibration using OEM scan tool.
Forward Radar Replacement
Radar module replacement requires alignment/calibration using OEM scan tool.
BSM Sensor Replacement
Blind spot monitoring sensor replacement requires calibration using OEM scan tool.
Mirror Replacement
Surround view mirror camera recalibration required after mirror R&R. Use OEM scan tool.
SRS Modules
Airbag Control Module (ACM)
- Location
- Under center console, floor tunnel
- Manufacturer
- Continental / Autoliv
- Chip / MCU
- Continental SRS ECU
- Notes
- Ferrari SD3 crash clear and DTC reset. Hard deployment: physical inspection mandatory before crash clear - replace if deformed. New ACM: Ferrari SD3 VIN coding and factory authorization. Factory-only parts. Roma side-bolster airbags are door-integrated - verify door airbag mounting after any door panel removal.
Integrated SRS / No standalone ACM
- Location
- Under center console, floor tunnel
- Notes
- OEM part INTEGRATED (verify fitment via VIN).
ECU Modules
ECU - 3.9L twin-turbo V8 F154 (612hp) ~313930 (VERIFY VIA FERRARI SD3 VIN)
- Part number
- ~313930 (VERIFY VIA FERRARI SD3 VIN)
- Protocol / method
- Professional Diagnostic Tool
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Bosch MED17 (Ferrari F154 variant)
- Notes
- Ferrari SD3 required for ECU flash. Factory authorization mandatory. No clone. Battery tender at 14.4V throughout. F154 twin-turbo V8: throttle adaptation, fuel trim adaptation, and turbo actuator calibration required post-programming. SD3 programming session 60-120 minutes.
DCT - 8-speed Dual-Clutch Transmission Control ~313931 (VERIFY VIA FERRARI SD3 VIN)
- Part number
- ~313931 (VERIFY VIA FERRARI SD3 VIN)
- Protocol / method
- Professional Diagnostic Tool
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Getrag / Ferrari DCT TCU
- Notes
- Ferrari SD3 TCU flash and DCT clutch learning at operating temperature. Factory authorization. Not interchangeable with Purosangue TCU (AWD vs RWD spec).
BCM Modules
Central Electronic Module (CEM) ~313928 (VERIFY VIA FERRARI SD3 VIN)
- Part number
- ~313928 (VERIFY VIA FERRARI SD3 VIN)
- Security
- ferrari_crypto
- Coding required
- Yes
- Cloning supported
- No
- Notes
- Ferrari SD3 VIN coding. No clone. Factory-only. Online factory authorization session. 60-120 min programming.
Door Control Module (L/R) ~313929 (VERIFY VIA FERRARI SD3 VIN)
- Part number
- ~313929 (VERIFY VIA FERRARI SD3 VIN)
- Security
- ferrari_crypto
- Coding required
- Yes
- Cloning supported
- No
- Notes
- Ferrari SD3 coding required. Window normalization and door-integrated airbag coding post-replacement.
TCU / TCM Transmission Modules
TCU - F1 DCT 8-Speed Auto 311055
- Part number
- 311055
- Protocol / method
- Bench
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Infineon Tricore TC297
- Notes
- Ferrari SD3 required for programming. TCU bench access via JTAG. VIN-locked. Dealer-only service.
ABS / Brake Modules
ABS/ESC Module (Bosch - Ferrari integration) ~313932 (VERIFY VIA FERRARI SD3 VIN)
- Part number
- ~313932 (VERIFY VIA FERRARI SD3 VIN)
- Cloning supported
- No
- Notes
- Ferrari SD3 coding and automated bleed required. No clone. Steering angle sensor recalibration via SD3. MR damper system integrates with ESC on Roma - verify damper control post-replacement if equipped.
Other Modules (IPC, SAS)
Instrument Panel Cluster (IPC) FERRARI F169 PROPRIETARY IPC
- Part number
- FERRARI F169 PROPRIETARY IPC
- Cloning supported
- Yes
- Notes
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Steering Angle Sensor (SAS)
- Coding required
- Yes
- Notes
- - PN not in Mopar catalog
Connectivity & Accessories
Ferrari Infotainment (Roma 8.4-inch touchscreen) ~313933 (VERIFY VIA FERRARI SD3 VIN)
- Part number
- ~313933 (VERIFY VIA FERRARI SD3 VIN)
- Notes
- Ferrari SD3 coding and SVM required after replacement. Roma 8.4-inch display. Apple CarPlay standard. Factory authorization.
Instrument Cluster - Ferrari eManettino System ~313934 (VERIFY VIA FERRARI SD3 VIN)
- Part number
- ~313934 (VERIFY VIA FERRARI SD3 VIN)
- Notes
- Ferrari SD3 VIN coding. Mileage via SD3. Roma has a distinctive eManettino control on steering wheel - cluster coding must restore manettino settings.
Magnetorheological Adaptive Dampers (if equipped) ~313935 (VERIFY VIA FERRARI SD3 VIN)
- Part number
- ~313935 (VERIFY VIA FERRARI SD3 VIN)
- Notes
- Ferrari SD3 damper calibration after module replacement. OEM Ferrari MR dampers only. Available on Sport trim and above.
ARCHITECTURE & CONNECTIVITY
Architecture & Connectivity
- Body Construction
- Aluminum space frame with aluminum and composite body panels; Ferrari Maranello body shop
- OBD Protocol
- CAN-based (Ferrari proprietary - generic OBD tools cannot access Ferrari modules)
- CAN Architecture
- Ferrari proprietary multi-CAN architecture; MOST (infotainment); SD3 interface required for full access
- Infotainment
- Ferrari Digital Interface: 8.4-inch touchscreen; Apple CarPlay; eManettino steering wheel controls
- OTA Capable
- No
- Infotainment Name
- Ferrari Infotainment
- Wireless CarPlay
- Yes
- Wireless Android Auto
- Yes
- ECU/TCM Unlocking
- Contact us
- ECU/TCM Flashing
- Contact us
OPENPILOT / COMMA.AI
Openpilot Compatibility
Not Supported
Not supported - ferrari not in openpilot support tree
Not in openpilot support tree as of April 2026. Ferrari not in openpilot support tree. Exotic brand not ported.
FREQUENTLY ASKED QUESTIONS
FAQ
How much does ADAS calibration cost for a 2026 Ferrari Roma?
ADAS calibration pricing for a 2026 Ferrari Roma depends on which of its 6 documented systems need work after a repair. This vehicle is documented with Forward Camera - Ferrari Vision Assist, Forward Radar (77GHz), Blind Spot Monitor / Rear Lateral Radar, 360-Degree Surround View Camera System, and Park Distance Control (PDC). We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.
Can you reset the airbag light on a 2026 Ferrari Roma?
Yes. The 2026 Ferrari Roma uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Mobile diagnosis and programming are available in DFW, and mail-in module service is available nationwide. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.
What is needed after replacing the windshield on a 2026 Ferrari Roma?
After windshield replacement on a 2026 Ferrari Roma, Forward Camera - Ferrari Vision Assist, Forward Radar (77GHz), and 360-Degree Surround View Camera System rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in module service is available nationwide for eligible module work.
How long does a 2026 Ferrari Roma module service take?
Most 2026 Ferrari Roma onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 12 programmable modules documented in our database (2 ECU, 2 BCM, 1 TCU, 1 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module service is available nationwide.
Do you cover the 2026 Ferrari Roma on-site, or is this mail-in only?
We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, post-repair recoding, and supported module work). Mail-in module service is available nationwide. Quote the work and we will confirm the active service path for the 2026 Ferrari Roma. Do not ship a module unless support confirms next steps.
What kind of warranty do you offer on 2026 Ferrari Roma programming?
Every programming, cloning, and calibration job on the 2026 Ferrari Roma is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
Which modules on a 2026 Ferrari Roma can you actually service?
We program, clone, repair, or replace the full programmable-module stack on a 2026 Ferrari Roma. For this vehicle our database documents:
- 2 engine control (ECU/PCM)
- 1 transmission control (TCU/TCM)
- 2 body control (BCM and related)
- 1 ABS / brake control (EBCM)
- 1 immobilizer / security
- 1 key & fob
- 1 instrument cluster (IPC)
- 1 steering angle sensor (SAS)
- 6 ADAS module
Infotainment on this platform: Ferrari Infotainment. Send the VIN and the operations performed and we will confirm support and pricing.
Additional Module Part Numbers
Additional OEM-sourced part numbers for the 2026 Ferrari Roma covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.
- ADAS Module Part Numbers
- 313920, 313921, 313922 (L), 313923 (R), 313924, 313925
- ECU / PCM Part Numbers
- 313930, 313931
- BCM / Body Module Part Numbers
- ~313928 (VERIFY VIA FERRARI SD3 VIN), ~313929 (VERIFY VIA FERRARI SD3 VIN)
- TCU / TCM Part Numbers
- 311055
- SRS / Airbag Module Part Numbers
- 797003 (FERRARI F169 ROMA AIRBAG ECU)
- ABS / EBCM Part Numbers
- 313932
- Instrument Cluster (IPC) Part Numbers
- FERRARI F169 PROPRIETARY IPC
- Transmission Control Module (TCM) Part Numbers
- 311055
Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.
Different trim or build?
Send your VIN and we'll confirm exact module support and pricing in the quote response.
Hit a security wall? We've got the keys.
1-year unlimited warranty on every flash and calibration.
Shared module fitment
Vehicles sharing modules with the 2026 Ferrari Roma
These vehicles use one or more of the same replacement modules indexed for this vehicle.
Finish the repair
Need help finishing this repair?
Get onsite help in Dallas-Fort Worth. Ask about same-day availability or a one-time remote session for eligible non-VSP work.
Factory programming software Explore one-time factory coding and programming. We confirm the software and procedure for your vehicle. Module programming & recovery Replacing a module or dealing with a failed programming attempt? Send the part numbers and fault scan for review. Onsite tools & equipment Bring in a technician or ask about hourly, daily and weekly rentals where licensing and equipment availability allow.