Immobilizer: Toyota Smart Key / Transponder
StandardKey programming requires manufacturer-level tool access. Add key supported. All keys lost (AKL) supported.
Use vehicle lookup when you know the year, make, and model. Use quote when the car is in front of you and the symptom matters more than the catalog page.
Check coverage by vehicle, or start with the VIN and symptoms.
Call dispatch: (945) 382-4065Covers model years 2007-2021 - one service guide for the whole generation.
Full ADAS calibration, module programming, and key security work for every Toyota Tundra built on this platform. Same-day mobile service across the Dallas/Fort Worth metroplex; mail-in accepted nationwide.
The ADAS, module, and security rows below are consolidated across the full 2007-2021 generation. A year badge marks rows that apply only to part of the span; rows without a badge apply to every year. Year-specific differences are summarized under “What changes across 2007-2021”.
Expert ADAS calibration, module programming, and diagnostic recovery for the 2018 Toyota Tundra. On this vehicle we cover documented systems include Rear View Camera, Forward Camera (Monocular), and Forward Radar (77GHz), this XK50 (2nd Gen Tundra, verify by VIN) platform vehicle, Toyota Smart Key / Transponder immobilizer support. Mobile across the DFW Metroplex, mail-in nationwide for module-bench work.
Key programming requires manufacturer-level tool access. Add key supported. All keys lost (AKL) supported.
Verify platform code matches when cross-referencing part numbers across model years.
Availability varies by trim and market. Verify rear camera, BSM/RCTA, parking sonar, and any PCS/DRCC/LDA/AHB equipment by VIN in Toyota TIS.
Verify platform code and part compatibility by VIN in Toyota TIS before cross-referencing across generations.
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
Toyota Techstream / Toyota GTS+
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
OEM subscription required
Make-level OEM tool map plus exact-year gateway and ADAS fields.
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Tool subscription required
Service-level scanner-vendor source packet plus exact-year ADAS records.
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Bench programmer source packet plus exact-year module/security records.
This platform uses Toyota multi-CAN/LIN body and powertrain network; OBD2 DLC pins 6/14 CAN. Verify exact topology by VIN in Toyota TIS. with ISO 15765-4 CAN (500 kbps).
This page consolidates Toyota Tundra service data for 2007-2021 across 15 model years; 15 years have merged CCT data.
Choose a yearMerged ADAS coverage includes 31 system records, including Rear View Camera (2007), Rear View Camera (2008-2009), Rear View Camera (2010-2011), and Rear View Camera (2012-2014). Year-marked systems apply only to the shown range.
View ADAS dataThis generation has 40 merged calibration trigger records. Trigger applicability can vary by year - verify by VIN before setup.
View triggersThe merged generation page indexes 132 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, IPC coverage. Part numbers are confirmed for the exact year/VIN.
View modulesGateway, immobilizer, and key-security coverage includes 15 merged records. Security procedures vary by year - verify by VIN.
View securityCore Auto Logic supports generation-level diagnostics, ADAS calibration, module programming, security-access planning, and mail-in bench work for the Toyota Tundra 2007-2021 span, with exact-year validation before service.
Get a quoteYes
Techstream VIN learning + IMMO registration.
required
Techstream VIN registration, IMMO coding, injector compensation entry, throttle zero-point required. Confirm engine code (4.6L vs 5.7L) before ordering ECM. No hybrid - no HV protocols required on XK50 Tundra.
required
Techstream VIN registration, IMMO coding, injector compensation entry, throttle zero-point required. Confirm engine code (4.6L vs 5.7L) before ordering ECM. No hybrid - no HV protocols required on XK50 Tundra.
required
Techstream VIN registration, IMMO coding, injector compensation, throttle zero-point. Confirm engine code before ordering.
required
Techstream VIN registration, IMMO coding, injector compensation, throttle zero-point. Confirm engine code before ordering.
required
Techstream VIN registration, IMMO coding, injector compensation, throttle zero-point. Confirm 4.6L vs 5.7L before ordering. No HV protocols on XK50.
required
Techstream VIN registration, IMMO coding, injector compensation, throttle zero-point. Confirm 4.6L vs 5.7L before ordering. No HV protocols on XK50.
Yes
Techstream zero-point calibration (yaw sensor + steering angle).
required
Verify equipment by VIN. If a forward camera is equipped or disturbed, follow Toyota TIS static calibration for this exact VIN and model year on a level surface.
required
Static camera calibration required via our Techstream diagnostic software. Use XK50 WSM target specifications (truck geometry - verify via TIS). Do not apply XK70 (2022+) specs. Level surface, target at specified distance from vehicle front. Clear all TSS-P DTC before road test.
required
Static camera calibration required via our Techstream diagnostic software. Use XK50 WSM target specifications (truck geometry - verify via TIS). Do not apply XK70 (2022+) specs. Level surface, target at specified distance from vehicle front. Clear all TSS-P DTC before road test.
required
Static camera calibration required via our Techstream diagnostic software. Use XK50 WSM target specifications (truck geometry - verify via TIS). Do not apply XK70 (2022+) specs. Level surface, target at specified distance from vehicle front. Clear all TSS-P DTC before road test.
required
Static camera calibration required via our Techstream diagnostic software. Use XK50 WSM target specifications (truck geometry - verify via TIS). Do not apply XK70 (2022+) specs. Level surface, target at specified distance from vehicle front. Clear all TSS-P DTC before road test.
required
Static camera calibration via our Techstream diagnostic software. XK50 truck-geometry WSM specs. Do not use XK70 2022+ specs. Level surface, target at specified distance. Clear DTC before road test.
required
Static camera calibration via our Techstream diagnostic software. XK50 truck-geometry WSM specs. Do not use XK70 2022+ specs. Level surface, target at specified distance. Clear DTC before road test.
required
Static camera calibration via our Techstream diagnostic software. XK50 truck-geometry WSM specs. Do not use XK70 2022+ specs. Level surface, target at specified distance. Clear DTC before road test.
required
Static camera calibration via our Techstream diagnostic software. XK50 truck-geometry WSM specs. Do not use XK70 2022+ specs. Level surface, target at specified distance. Clear DTC before road test.
required
Static camera calibration via our Techstream diagnostic software. Use XK50 WSM target specs - do not use XK70 2022+ specs. Level surface, target at specified distance. Clear all TSS-P DTC before road test.
required
Static camera calibration via our Techstream diagnostic software. Use XK50 WSM target specs - do not use XK70 2022+ specs. Level surface, target at specified distance. Clear all TSS-P DTC before road test.
required
Static camera calibration via our Techstream diagnostic software. Use XK50 WSM target specs - do not use XK70 2022+ specs. Level surface, target at specified distance. Clear all TSS-P DTC before road test.
required
Static camera calibration via our Techstream diagnostic software. Use XK50 WSM target specs - do not use XK70 2022+ specs. Level surface, target at specified distance. Clear all TSS-P DTC before road test.
required
Camera module replacement requires initialization and calibration using Toyota TIS/Techstream when equipped. Use the exact repair-manual target and setup for the VIN.
Yes
Camera module replacement requires full recalibration using Techstream.
Yes
Camera module replacement requires full recalibration using Techstream.
required
Inspect brackets and mounting points before calibration. If radar or parking sensors are equipped or disturbed, follow Toyota TIS initialization/calibration and verify DTC clear status.
required
Confirm trim equipment by VIN. If blind-spot sensors are disturbed, initialize/calibrate through Techstream/TIS and road-verify BSM/RCTA operation.
required
Use Toyota TIS and Techstream for VIN registration, immobilizer synchronization as equipped, ECM/TCM initialization, and calibration or adaptive relearn after replacement.
required
Use Toyota TIS and Techstream for VIN registration, immobilizer synchronization as equipped, ECM/TCM initialization, and calibration or adaptive relearn after replacement.
required
Use Toyota TIS and Techstream for VIN registration, immobilizer synchronization as equipped, ECM/TCM initialization, and calibration or adaptive relearn after replacement.
required
Perform Techstream ABS/VSC initialization, required brake bleed, steering-angle zero-point calibration, and road-test verification when required by Toyota TIS.
required
Perform Techstream ABS/VSC initialization, required brake bleed, steering-angle zero-point calibration, and road-test verification when required by Toyota TIS.
required
TIS authorization and Techstream key/body ECU registration may be required. Have all customer keys present and verify Smart Entry/start authorization after replacement.
required
TIS authorization and Techstream key/body ECU registration may be required. Have all customer keys present and verify Smart Entry/start authorization after replacement.
required
Perform steering-angle zero-point calibration when required after alignment, steering, or suspension work. Verify road-test operation and DTC clear status.
required
Perform steering-angle zero-point calibration when required after alignment, steering, or suspension work. Verify road-test operation and DTC clear status.
required
Perform steering-angle zero-point calibration when required after alignment, steering, or suspension work. Verify road-test operation and DTC clear status.
required
SAS zero-point calibration via Techstream after any alignment, suspension, or lift kit work. If lift kit installed, radar aim must also be verified - even modest lift heights shift radar aim angle beyond TSS-P tolerance. Vehicle must be at final ride height before calibration.
required
SAS zero-point calibration via Techstream after any alignment, suspension, or lift kit work. If lift kit installed, radar aim must also be verified - even modest lift heights shift radar aim angle beyond TSS-P tolerance. Vehicle must be at final ride height before calibration.
recommended
Perform Techstream or vehicle-specific TPMS registration after sensor, wheel, or tire changes when required.
required
Radar Techstream initialization required. Combine with camera calibration if both disturbed. No physical aiming - replace if mechanically deformed. Front bumper fully reinstalled before calibration.
required
Radar Techstream initialization required. Combine with camera calibration if both disturbed. No physical aiming - replace if mechanically deformed. Front bumper fully reinstalled before calibration.
required
Radar Techstream initialization required. Combine with camera calibration if both disturbed. No physical aiming - replace if mechanically deformed. Front bumper fully reinstalled before calibration.
required
Radar Techstream initialization. Combine with camera cal if both disturbed.
required
Radar Techstream init. Combine with camera cal if both disturbed. Replace if deformed. Front bumper fully installed before calibration.
required
BSM Techstream initialization for any disturbed sensor. Fixed mount. Road verify at 20+ mph. Not all XK50 trims have BSM - confirm before quoting.
required
BSM Techstream initialization for any disturbed sensor. Fixed mount. Road verify at 20+ mph. Not all XK50 trims have BSM - confirm before quoting.
required
BSM Techstream initialization for any disturbed sensor. Confirm trim has BSM before quoting.
required
BSM Techstream initialization for any disturbed sensor. Confirm trim has BSM before quoting.
required
BSM initialization via Techstream. Verify trim before quoting. Road verify 20+ mph.
required
BSM initialization via Techstream. Verify trim before quoting. Road verify 20+ mph.
required
Full Techstream module scan. SRS ECU: replace if DTC 51-xx present - no crash clear available. All disturbed ADAS sensors calibrated before delivery.
required
Full Techstream module scan. SRS ECU: replace if DTC 51-xx present - no crash clear available. All disturbed ADAS sensors calibrated before delivery.
required
Full Techstream module scan. SRS ECU: replace if DTC 51-xx present - no crash clear available. All disturbed ADAS sensors calibrated before delivery.
required
Full Techstream scan. SRS: replace if DTC 51-xx present. Calibrate all disturbed ADAS sensors.
required
Full Techstream scan. SRS: replace if DTC 51-xx present. Calibrate all disturbed ADAS sensors.
required
Full Techstream scan. SRS: replace if DTC 51-xx present. Calibrate all disturbed ADAS sensors.
required
Full Techstream scan. SRS: replace if DTC 51-xx present. Calibrate all disturbed ADAS before delivery.
required
Full Techstream scan. SRS: replace if DTC 51-xx present. Calibrate all disturbed ADAS before delivery.
required
Full Techstream scan. SRS: replace if DTC 51-xx present. Calibrate all disturbed ADAS before delivery.
required
All keys erased on replacement. TIS authorization required. All customer keys must be present for Techstream re-registration. Verify max 8 key limit.
required
All keys erased. TIS authorization. All keys present for re-registration. Max 8 keys.
required
All keys erased. TIS authorization. All keys present for Techstream re-registration.
Yes
Radar module replacement requires alignment/calibration using Techstream.
Yes
Radar module replacement requires alignment/calibration using Techstream.
Yes
Blind spot monitoring sensor replacement requires calibration using Techstream.
Yes
Blind spot monitoring sensor replacement requires calibration using Techstream.
Conditional
If BSD sensor is mirror-integrated, recalibration required. Verify sensor location; use Techstream if applicable.
Conditional
If BSD sensor is mirror-integrated, recalibration required. Verify sensor location; use Techstream if applicable.
required
SAS zero-point via Techstream. Radar aim must be verified after any lift - even modest height change shifts aim beyond TSS-P tolerance. Calibrate at final ride height.
required
SAS zero-point via Techstream. Radar aim must be verified after any lift - even modest height change shifts aim beyond TSS-P tolerance. Calibrate at final ride height.
required
SAS zero-point via Techstream. Radar aim verification required after any lift - calibrate at final ride height.
required
SAS zero-point via Techstream. Radar aim verification required after any lift - calibrate at final ride height.
| Year | VIN split | Infotainment | Trim notes |
|---|---|---|---|
| 2007 | |||
| 2008 | |||
| 2009 | VIN pos 4-8 identifies model/body/engine. Toyota WMI: 2T1 (Camry), 4T1 (Corolla/RAV4), 5TD (Highlander). Position 7 = engine. Position 10 = model year code. | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. | |
| 2010 | VIN pos 4-8 identifies model/body/engine. Toyota WMI: 2T1 (Camry), 4T1 (Corolla/RAV4), 5TD (Highlander). Position 7 = engine. Position 10 = model year code. | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. | |
| 2011 | VIN pos 4-8 identifies model/body/engine. Toyota WMI: 2T1 (Camry), 4T1 (Corolla/RAV4), 5TD (Highlander). Position 7 = engine. Position 10 = model year code. | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. | |
| 2012 | VIN pos 4-8 identifies model/body/engine. Toyota WMI: 2T1 (Camry), 4T1 (Corolla/RAV4), 5TD (Highlander). Position 7 = engine. Position 10 = model year code. | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. | |
| 2013 | VIN pos 4-8 identifies model/body/engine. Toyota WMI: 2T1 (Camry), 4T1 (Corolla/RAV4), 5TD (Highlander). Position 7 = engine. Position 10 = model year code. | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. | |
| 2014 | VIN pos 4-8 identifies model/body/engine. Toyota WMI: 2T1 (Camry), 4T1 (Corolla/RAV4), 5TD (Highlander). Position 7 = engine. Position 10 = model year code. | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. | |
| 2015 | VIN pos 4-8 identifies model/body/engine. Toyota WMI: 2T1 (Camry), 4T1 (Corolla/RAV4), 5TD (Highlander). Position 7 = engine. Position 10 = model year code. | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. | |
| 2016 | VIN pos 4-8 identifies model/body/engine. Toyota WMI: 2T1 (Camry), 4T1 (Corolla/RAV4), 5TD (Highlander). Position 7 = engine. Position 10 = model year code. | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. | |
| 2017 | VIN pos 4-8 identifies model/body/engine. Toyota WMI: 2T1 (Camry), 4T1 (Corolla/RAV4), 5TD (Highlander). Position 7 = engine. Position 10 = model year code. | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. | |
| 2018 | VIN pos 4-8 identifies model/body/engine. Toyota WMI: 2T1 (Camry), 4T1 (Corolla/RAV4), 5TD (Highlander). Position 7 = engine. Position 10 = model year code. | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. | |
| 2019 | VIN pos 4-8 identifies model/body/engine. Toyota WMI: 2T1 (Camry), 4T1 (Corolla/RAV4), 5TD (Highlander). Position 7 = engine. Position 10 = model year code. | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. | |
| 2020 | VIN pos 4-8 identifies model/body/engine. Toyota WMI: 2T1 (Camry), 4T1 (Corolla/RAV4), 5TD (Highlander). Position 7 = engine. Position 10 = model year code. | Toyota Entune 3.0 | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. |
| 2021 | VIN pos 4-8 identifies model/body/engine. Toyota WMI: 2T1 (Camry), 4T1 (Corolla/RAV4), 5TD (Highlander). Position 7 = engine. Position 10 = model year code. | Toyota Entune 3.0 | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. |
Differences versus the generation reference year. Years not listed here match the shared platform data on this page.
31 ADAS systems documented across 2007-2021. Rows that apply to only part of the generation carry a year badge.
Toyota Safety Sense P and other driver-assist equipment should be verified by VIN. Calibrate equipped PCS/LDA/AHB/DRCC camera and radar systems using Toyota TIS after glass, bumper, sensor, or collision work; BSM/RCTA and parking sonar vary by trim.
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Rear View Camera 2007 | Rear Camera | Camera | None | Conditional | - | |
| Rear View Camera 2008-2009 | Rear Camera | Camera | None | Conditional | - | |
| Rear View Camera 2010-2011 | Rear Camera | Camera | None | YES | - | |
| Rear View Camera 2012-2014 | Rear Camera | Camera | None | YES | - | |
| Rear View Camera 2015-2018 | Rear Camera | Camera | Static | YES | - | |
| Forward Camera (Monocular) 2015-2018 | Forward Camera | Camera | Static | YES | - | |
| Forward Radar (77GHz) 2015-2018 | Front Radar | Radar | Static | YES | - | |
| Lane Keep Assist / Lane Departure Warning (LKA/LDW) 2015-2018 | Forward Camera | Camera | Static | YES | - | |
| Adaptive Cruise Control (ACC) 2015-2018 | Front Radar | Radar | Static | YES | - | |
| Automatic Emergency Braking (AEB) 2015-2018 | Forward Camera | Camera | Static | YES | - | |
| Blind Spot Monitor Sensor - Left (BSM) 2015-2018 | Blind Spot Monitor | Radar | Static + Dynamic | YES | - | |
| Blind Spot Monitor Sensor - Right (BSM) 2015-2018 | Blind Spot Monitor | Radar | Static + Dynamic | YES | - | |
| Rear Cross Traffic Alert (RCTA) 2015-2018 | Blind Spot Monitor | Radar | None | YES | - | |
| Forward Camera (Monocular) 2019 | Forward Camera | Camera | Static | YES | ~86790-0C020 (VERIFY SUFFIX VIA TIS - XK50 TUNDRA SPECIFIC) | |
| Forward Radar (77GHz) 2019 | Front Radar | Radar | Static | YES | ~88210-0C020 (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Blind Spot Monitor Sensor - Left (BSM) 2019 | Side Radar | Radar | Static + Dynamic | YES | ~88162-0C010 (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Blind Spot Monitor Sensor - Right (BSM) 2019 | Side Radar | Radar | Static + Dynamic | YES | ~88161-0C010 (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Rear Cross Traffic Alert (RCTA) 2019 | Side Radar | Radar | None | YES | - | |
| Automatic High Beams (AHB) 2019 | Forward Camera | Camera | Static | YES | - | |
| Rear View Camera 2019 | Rear Camera | Camera | Static | YES | ~87806-0C020 (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Forward Camera (Monocular) 2020 | Forward Camera | Camera | Static | YES | ~86790-0C020 (VERIFY 2020 SUFFIX VIA TIS) | |
| Forward Radar (77GHz) 2020 | Front Radar | Radar | Static | YES | ~88210-0C020 (VERIFY 2020 SUFFIX VIA TIS) | |
| Blind Spot Monitor Sensor - Left (BSM) 2020 | Side Radar | Radar | Static + Dynamic | YES | ~88162-0C010 (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Blind Spot Monitor Sensor - Right (BSM) 2020-2021 | Side Radar | Radar | Static + Dynamic | YES | ~88161-0C010 (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Rear Cross Traffic Alert (RCTA) 2020-2021 | Side Radar | Radar | None | YES | - | |
| Automatic High Beams (AHB) 2020-2021 | Forward Camera | Camera | Static | YES | - | |
| Rear View Camera 2020 | Rear Camera | Camera | Static | YES | ~87806-0C020 (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Pre-Collision System Forward Camera (TSS-P - XK50 Final Year) 2021 | Forward Camera | Camera | Static | YES | ~86790-0C020 (VERIFY 2021 SUFFIX VIA TIS) | |
| Forward Radar (77GHz) 2021 | Front Radar | Radar | Static | YES | ~88210-0C020 (VERIFY 2021 SUFFIX VIA TIS) | |
| Blind Spot Monitor Sensor - Left (BSM) 2021 | Side Radar | Radar | Static + Dynamic | YES | ~88162-0C010 (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Rear View Camera 2021 | Rear Camera | Camera | Static | YES | ~87806-0C020 (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) |
ADAS SYSTEM
Need this calibrated?
Get a quote for ADAS calibrationTechstream VIN learning + IMMO registration.
Techstream zero-point calibration (yaw sensor + steering angle).
Verify equipment by VIN. If a forward camera is equipped or disturbed, follow Toyota TIS static calibration for this exact VIN and model year on a level surface.
Camera module replacement requires initialization and calibration using Toyota TIS/Techstream when equipped. Use the exact repair-manual target and setup for the VIN.
Inspect brackets and mounting points before calibration. If radar or parking sensors are equipped or disturbed, follow Toyota TIS initialization/calibration and verify DTC clear status.
Confirm trim equipment by VIN. If blind-spot sensors are disturbed, initialize/calibrate through Techstream/TIS and road-verify BSM/RCTA operation.
Use Toyota TIS and Techstream for VIN registration, immobilizer synchronization as equipped, ECM/TCM initialization, and calibration or adaptive relearn after replacement.
Perform Techstream ABS/VSC initialization, required brake bleed, steering-angle zero-point calibration, and road-test verification when required by Toyota TIS.
TIS authorization and Techstream key/body ECU registration may be required. Have all customer keys present and verify Smart Entry/start authorization after replacement.
Perform steering-angle zero-point calibration when required after alignment, steering, or suspension work. Verify road-test operation and DTC clear status.
Perform Techstream or vehicle-specific TPMS registration after sensor, wheel, or tire changes when required.
Static camera calibration required via our Techstream diagnostic software. Use XK50 WSM target specifications (truck geometry - verify via TIS). Do not apply XK70 (2022+) specs. Level surface, target at specified distance from vehicle front. Clear all TSS-P DTC before road test.
Radar Techstream initialization required. Combine with camera calibration if both disturbed. No physical aiming - replace if mechanically deformed. Front bumper fully reinstalled before calibration.
BSM Techstream initialization for any disturbed sensor. Fixed mount. Road verify at 20+ mph. Not all XK50 trims have BSM - confirm before quoting.
Full Techstream module scan. SRS ECU: replace if DTC 51-xx present - no crash clear available. All disturbed ADAS sensors calibrated before delivery.
Techstream VIN registration, IMMO coding, injector compensation entry, throttle zero-point required. Confirm engine code (4.6L vs 5.7L) before ordering ECM. No hybrid - no HV protocols required on XK50 Tundra.
All keys erased on replacement. TIS authorization required. All customer keys must be present for Techstream re-registration. Verify max 8 key limit.
SAS zero-point calibration via Techstream after any alignment, suspension, or lift kit work. If lift kit installed, radar aim must also be verified - even modest lift heights shift radar aim angle beyond TSS-P tolerance. Vehicle must be at final ride height before calibration.
Camera module replacement requires full recalibration using Techstream.
Radar module replacement requires alignment/calibration using Techstream.
Blind spot monitoring sensor replacement requires calibration using Techstream.
If BSD sensor is mirror-integrated, recalibration required. Verify sensor location; use Techstream if applicable.
Static camera calibration via our Techstream diagnostic software. XK50 truck-geometry WSM specs. Do not use XK70 2022+ specs. Level surface, target at specified distance. Clear DTC before road test.
Radar Techstream initialization. Combine with camera cal if both disturbed.
BSM Techstream initialization for any disturbed sensor. Confirm trim has BSM before quoting.
Full Techstream scan. SRS: replace if DTC 51-xx present. Calibrate all disturbed ADAS sensors.
Techstream VIN registration, IMMO coding, injector compensation, throttle zero-point. Confirm engine code before ordering.
All keys erased. TIS authorization. All keys present for re-registration. Max 8 keys.
SAS zero-point via Techstream. Radar aim must be verified after any lift - even modest height change shifts aim beyond TSS-P tolerance. Calibrate at final ride height.
Camera module replacement requires full recalibration using Techstream.
Radar module replacement requires alignment/calibration using Techstream.
Blind spot monitoring sensor replacement requires calibration using Techstream.
If BSD sensor is mirror-integrated, recalibration required. Verify sensor location; use Techstream if applicable.
Static camera calibration via our Techstream diagnostic software. Use XK50 WSM target specs - do not use XK70 2022+ specs. Level surface, target at specified distance. Clear all TSS-P DTC before road test.
Radar Techstream init. Combine with camera cal if both disturbed. Replace if deformed. Front bumper fully installed before calibration.
BSM initialization via Techstream. Verify trim before quoting. Road verify 20+ mph.
Full Techstream scan. SRS: replace if DTC 51-xx present. Calibrate all disturbed ADAS before delivery.
Techstream VIN registration, IMMO coding, injector compensation, throttle zero-point. Confirm 4.6L vs 5.7L before ordering. No HV protocols on XK50.
All keys erased. TIS authorization. All keys present for Techstream re-registration.
SAS zero-point via Techstream. Radar aim verification required after any lift - calibrate at final ride height.
132 documented Toyota Tundra modules across 2007-2021. Open a group for part numbers, programming protocol, security notes, and clone support.
_years covers only 2007 for this generation
Compatible donor years: 2007
Always match the full part number before buying a used module.
_years covers only 2009-2012 for this generation
Compatible donor years: 2009, 2010, 2011, 2012
Always match the full part number before buying a used module.
_years covers only 2009-2013 for this generation
Compatible donor years: 2009, 2010, 2011, 2012, 2013
Always match the full part number before buying a used module.
_years covers only 2009-2013 for this generation
Compatible donor years: 2009, 2010, 2011, 2012, 2013
Always match the full part number before buying a used module.
_years covers only 2009-2010 for this generation
Compatible donor years: 2009, 2010
Always match the full part number before buying a used module.
_years covers only 2009-2010 for this generation
Compatible donor years: 2009, 2010
Always match the full part number before buying a used module.
_years covers only 2009-2010 for this generation
Compatible donor years: 2009, 2010
Always match the full part number before buying a used module.
_years covers only 2011-2013 for this generation
Compatible donor years: 2011, 2012, 2013
Always match the full part number before buying a used module.
_years covers only 2012-2013 for this generation
Compatible donor years: 2012, 2013
Always match the full part number before buying a used module.
_years covers only 2012-2013 for this generation
Compatible donor years: 2012, 2013
Always match the full part number before buying a used module.
_years covers only 2012-2013 for this generation
Compatible donor years: 2012, 2013
Always match the full part number before buying a used module.
_years covers only 2012-2013 for this generation
Compatible donor years: 2012, 2013
Always match the full part number before buying a used module.
_years covers only 2012-2013 for this generation
Compatible donor years: 2012, 2013
Always match the full part number before buying a used module.
_years covers only 2012-2013 for this generation
Compatible donor years: 2012, 2013
Always match the full part number before buying a used module.
_years covers only 2012-2013 for this generation
Compatible donor years: 2012, 2013
Always match the full part number before buying a used module.
_years covers only 2012-2013 for this generation
Compatible donor years: 2012, 2013
Always match the full part number before buying a used module.
_years covers only 2013, 2015 for this generation
Compatible donor years: 2013, 2015
Always match the full part number before buying a used module.
_years covers only 2013, 2015 for this generation
Compatible donor years: 2013, 2015
Always match the full part number before buying a used module.
_years covers only 2013, 2015 for this generation
Compatible donor years: 2013, 2015
Always match the full part number before buying a used module.
_years covers only 2014 for this generation
Compatible donor years: 2014
Always match the full part number before buying a used module.
_years covers only 2015, 2017-2018 for this generation
Compatible donor years: 2015, 2017, 2018
Always match the full part number before buying a used module.
_years covers only 2015, 2017-2018 for this generation
Compatible donor years: 2015, 2017, 2018
Always match the full part number before buying a used module.
_years covers only 2015, 2017-2018 for this generation
Compatible donor years: 2015, 2017, 2018
Always match the full part number before buying a used module.
_years covers only 2016 for this generation
Compatible donor years: 2016
Always match the full part number before buying a used module.
_years covers only 2017-2018 for this generation
Compatible donor years: 2017, 2018
Always match the full part number before buying a used module.
_years covers only 2017-2018 for this generation
Compatible donor years: 2017, 2018
Always match the full part number before buying a used module.
_years covers only 2017-2018 for this generation
Compatible donor years: 2017, 2018
Always match the full part number before buying a used module.
_years covers only 2017-2018 for this generation
Compatible donor years: 2017, 2018
Always match the full part number before buying a used module.
_years covers only 2018, 2020 for this generation
Compatible donor years: 2018, 2020
Always match the full part number before buying a used module.
_years covers only 2018 for this generation
Compatible donor years: 2018
Always match the full part number before buying a used module.
_years covers only 2018, 2020 for this generation
Compatible donor years: 2018, 2020
Always match the full part number before buying a used module.
_years covers only 2018 for this generation
Compatible donor years: 2018
Always match the full part number before buying a used module.
_years covers only 2019 for this generation
Compatible donor years: 2019
Always match the full part number before buying a used module.
_years covers only 2020-2021 for this generation
Compatible donor years: 2020, 2021
Always match the full part number before buying a used module.
_years covers only 2020-2021 for this generation
Compatible donor years: 2020, 2021
Always match the full part number before buying a used module.
_years covers only 2021 for this generation
Compatible donor years: 2021
Always match the full part number before buying a used module.
_years covers only 2021 for this generation
Compatible donor years: 2021
Always match the full part number before buying a used module.
_years covers only 2008 for this generation
Compatible donor years: 2008
Always match the full part number before buying a used module.
_years covers only 2008 for this generation
Compatible donor years: 2008
Always match the full part number before buying a used module.
_years covers only 2008 for this generation
Compatible donor years: 2008
Always match the full part number before buying a used module.
_years covers only 2007 for this generation
Compatible donor years: 2007
Always match the full part number before buying a used module.
_years covers only 2008 for this generation
Compatible donor years: 2008
Always match the full part number before buying a used module.
_years covers only 2009 for this generation
Compatible donor years: 2009
Always match the full part number before buying a used module.
_years covers only 2007 for this generation
Compatible donor years: 2007
Always match the full part number before buying a used module.
_years covers only 2008 for this generation
Compatible donor years: 2008
Always match the full part number before buying a used module.
_years covers only 2009 for this generation
Compatible donor years: 2009
Always match the full part number before buying a used module.
_years covers only 2007 for this generation
Compatible donor years: 2007
Always match the full part number before buying a used module.
_years covers only 2008 for this generation
Compatible donor years: 2008
Always match the full part number before buying a used module.
_years covers only 2009 for this generation
Compatible donor years: 2009
Always match the full part number before buying a used module.
_years covers only 2010-2014 for this generation
Compatible donor years: 2010, 2011, 2012, 2013, 2014
Always match the full part number before buying a used module.
_years covers only 2015-2017 for this generation
Compatible donor years: 2015, 2016, 2017
Donor must match part family 89661-0C050 (5.7L 3UR-FE V8; VIN-locked
Always match the full part number before buying a used module.
_years covers only 2018 for this generation
Compatible donor years: 2018
Donor must match part family 89661-0C070 (5.7L 3UR-FE V8; VIN-locked
Always match the full part number before buying a used module.
_years covers only 2015-2017 for this generation
Compatible donor years: 2015, 2016, 2017
Donor must match part family 89661-0C060 (4.6L 1UR-FE V8); VIN-locked
Always match the full part number before buying a used module.
_years covers only 2018 for this generation
Compatible donor years: 2018
Donor must match part family 89661-0C080 (4.6L 1UR-FE V8); VIN-locked
Always match the full part number before buying a used module.
_years covers only 2015-2018 for this generation
Compatible donor years: 2015, 2016, 2017, 2018
Always match the full part number before buying a used module.
_years covers only 2015-2018 for this generation
Compatible donor years: 2015, 2016, 2017, 2018
Always match the full part number before buying a used module.
_years covers only 2019 for this generation
Compatible donor years: 2019
Always match the full part number before buying a used module.
_years covers only 2020 for this generation
Compatible donor years: 2020
Always match the full part number before buying a used module.
_years covers only 2021 for this generation
Compatible donor years: 2021
Always match the full part number before buying a used module.
_years covers only 2019 for this generation
Compatible donor years: 2019
Always match the full part number before buying a used module.
_years covers only 2020 for this generation
Compatible donor years: 2020
Always match the full part number before buying a used module.
_years covers only 2021 for this generation
Compatible donor years: 2021
Always match the full part number before buying a used module.
_years covers only 2019 for this generation
Compatible donor years: 2019
Always match the full part number before buying a used module.
_years covers only 2019 for this generation
Compatible donor years: 2019
Always match the full part number before buying a used module.
_years covers only 2019 for this generation
Compatible donor years: 2019
Always match the full part number before buying a used module.
_years covers only 2020 for this generation
Compatible donor years: 2020
Always match the full part number before buying a used module.
_years covers only 2021 for this generation
Compatible donor years: 2021
Always match the full part number before buying a used module.
_years covers only 2007-2014 for this generation
Compatible donor years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Always match the full part number before buying a used module.
_years covers only 2019-2020 for this generation
Compatible donor years: 2019, 2020
Always match the full part number before buying a used module.
_years covers only 2021 for this generation
Compatible donor years: 2021
Always match the full part number before buying a used module.
_years covers only 2015-2018 for this generation
Compatible donor years: 2015, 2016, 2017, 2018
Always match the full part number before buying a used module.
_years covers only 2015-2018 for this generation
Compatible donor years: 2015, 2016, 2017, 2018
Always match the full part number before buying a used module.
_years covers only 2019-2020 for this generation
Compatible donor years: 2019, 2020
Always match the full part number before buying a used module.
_years covers only 2021 for this generation
Compatible donor years: 2021
Always match the full part number before buying a used module.
_years covers only 2015-2018 for this generation
Compatible donor years: 2015, 2016, 2017, 2018
Always match the full part number before buying a used module.
_years covers only 2015-2018 for this generation
Compatible donor years: 2015, 2016, 2017, 2018
Always match the full part number before buying a used module.
_years covers only 2019-2020 for this generation
Compatible donor years: 2019, 2020
Always match the full part number before buying a used module.
_years covers only 2007-2008 for this generation
Compatible donor years: 2007, 2008
Always match the full part number before buying a used module.
_years covers only 2013-2014 for this generation
Compatible donor years: 2013, 2014
Always match the full part number before buying a used module.
_years covers only 2009-2010 for this generation
Compatible donor years: 2009, 2010
Always match the full part number before buying a used module.
_years covers only 2011-2012 for this generation
Compatible donor years: 2011, 2012
Donor must match part family 89530-0C0 - requires cloning
Always match the full part number before buying a used module.
_years covers only 2015-2016 for this generation
Compatible donor years: 2015, 2016
Always match the full part number before buying a used module.
_years covers only 2017-2018 for this generation
Compatible donor years: 2017, 2018
Donor must match part family 89530-0C0 - requires cloning
Always match the full part number before buying a used module.
_years covers only 2019-2020 for this generation
Compatible donor years: 2019, 2020
Donor must match part family 89530-0C - requires cloning
Always match the full part number before buying a used module.
_years covers only 2021 for this generation
Compatible donor years: 2021
Donor must match part family 89530-0C2 - requires cloning
Always match the full part number before buying a used module.
_years covers only 2007-2014 for this generation
Compatible donor years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Always match the full part number before buying a used module.
_years covers only 2015-2018 for this generation
Compatible donor years: 2015, 2016, 2017, 2018
Always match the full part number before buying a used module.
_years covers only 2019 for this generation
Compatible donor years: 2019
Always match the full part number before buying a used module.
_years covers only 2020 for this generation
Compatible donor years: 2020
Always match the full part number before buying a used module.
_years covers only 2021 for this generation
Compatible donor years: 2021
Always match the full part number before buying a used module.
_years covers only 2007-2014 for this generation
Compatible donor years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Always match the full part number before buying a used module.
_years covers only 2007-2014 for this generation
Compatible donor years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Always match the full part number before buying a used module.
_years covers only 2015-2018 for this generation
Compatible donor years: 2015, 2016, 2017, 2018
Always match the full part number before buying a used module.
_years covers only 2015-2018 for this generation
Compatible donor years: 2015, 2016, 2017, 2018
Always match the full part number before buying a used module.
_years covers only 2019 for this generation
Compatible donor years: 2019
Always match the full part number before buying a used module.
_years covers only 2020-2021 for this generation
Compatible donor years: 2020, 2021
Always match the full part number before buying a used module.
_years covers only 2019-2021 for this generation
Compatible donor years: 2019, 2020, 2021
Always match the full part number before buying a used module.
_years covers only 2019 for this generation
Compatible donor years: 2019
Always match the full part number before buying a used module.
_years covers only 2020-2021 for this generation
Compatible donor years: 2020, 2021
Always match the full part number before buying a used module.
_years covers only 2019 for this generation
Compatible donor years: 2019
Always match the full part number before buying a used module.
_years covers only 2020-2021 for this generation
Compatible donor years: 2020, 2021
Always match the full part number before buying a used module.
_years covers only 2010 for this generation
Compatible donor years: 2010
Donor must match part family 83800-0C270 - requires cloning
Always match the full part number before buying a used module.
_years covers only 2011 for this generation
Compatible donor years: 2011
Donor must match part family 83800-0C280 - requires cloning
Always match the full part number before buying a used module.
_years covers only 2012 for this generation
Compatible donor years: 2012
Donor must match part family 83800-0C290 - requires cloning
Always match the full part number before buying a used module.
_years covers only 2013 for this generation
Compatible donor years: 2013
Donor must match part family 83800-0C300 - requires cloning
Always match the full part number before buying a used module.
_years covers only 2014-2017 for this generation
Compatible donor years: 2014, 2015, 2016, 2017
Donor must match part family 83800-0C310 - requires cloning
Always match the full part number before buying a used module.
_years covers only 2015-2017 for this generation
Compatible donor years: 2015, 2016, 2017
Donor must match part family 83800-0C320 - requires cloning
Always match the full part number before buying a used module.
_years covers only 2018-2019 for this generation
Compatible donor years: 2018, 2019
Donor must match part family 83800-0C330 - requires cloning
Always match the full part number before buying a used module.
_years covers only 2018-2019 for this generation
Compatible donor years: 2018, 2019
Donor must match part family 83800-0C340 - requires cloning
Always match the full part number before buying a used module.
_years covers only 2020-2021 for this generation
Compatible donor years: 2020, 2021
Donor must match part family 83800-0CQ91 - requires cloning
Always match the full part number before buying a used module.
_years covers only 2007-2019 for this generation
Compatible donor years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Always match the full part number before buying a used module.
_years covers only 2007-2019 for this generation
Compatible donor years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Always match the full part number before buying a used module.
_years covers only 2020-2021 for this generation
Compatible donor years: 2020, 2021
Always match the full part number before buying a used module.
_years covers only 2007-2014 for this generation
Compatible donor years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Always match the full part number before buying a used module.
_years covers only 2007-2014 for this generation
Compatible donor years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Always match the full part number before buying a used module.
_years covers only 2007-2014 for this generation
Compatible donor years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Always match the full part number before buying a used module.
_years covers only 2007-2014 for this generation
Compatible donor years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Always match the full part number before buying a used module.
_years covers only 2007-2014 for this generation
Compatible donor years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Always match the full part number before buying a used module.
_years covers only 2015-2018 for this generation
Compatible donor years: 2015, 2016, 2017, 2018
Always match the full part number before buying a used module.
_years covers only 2015-2018 for this generation
Compatible donor years: 2015, 2016, 2017, 2018
Always match the full part number before buying a used module.
_years covers only 2015-2018 for this generation
Compatible donor years: 2015, 2016, 2017, 2018
Always match the full part number before buying a used module.
_years covers only 2015-2018 for this generation
Compatible donor years: 2015, 2016, 2017, 2018
Always match the full part number before buying a used module.
_years covers only 2015-2018 for this generation
Compatible donor years: 2015, 2016, 2017, 2018
Always match the full part number before buying a used module.
_years covers only 2019 for this generation
Compatible donor years: 2019
Always match the full part number before buying a used module.
_years covers only 2019 for this generation
Compatible donor years: 2019
Always match the full part number before buying a used module.
_years covers only 2019 for this generation
Compatible donor years: 2019
Always match the full part number before buying a used module.
_years covers only 2019 for this generation
Compatible donor years: 2019
Always match the full part number before buying a used module.
_years covers only 2020 for this generation
Compatible donor years: 2020
Always match the full part number before buying a used module.
_years covers only 2020 for this generation
Compatible donor years: 2020
Always match the full part number before buying a used module.
_years covers only 2020 for this generation
Compatible donor years: 2020
Always match the full part number before buying a used module.
_years covers only 2021 for this generation
Compatible donor years: 2021
Always match the full part number before buying a used module.
_years covers only 2021 for this generation
Compatible donor years: 2021
Always match the full part number before buying a used module.
15 gateway, immobilizer, and security items documented across 2007-2021.
Toyota Smart Entry - AES-128 DST-AES; no OBD pin extraction; AKL requires TIS dealer authorization; max 8 keys
_years covers only 2007-2014 for this generation
Compatible donor years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Always match the full part number before buying a used module.
_years covers only 2015-2018 for this generation
Compatible donor years: 2015, 2016, 2017, 2018
Always match the full part number before buying a used module.
_years covers only 2015-2018 for this generation
Compatible donor years: 2015, 2016, 2017, 2018
Always match the full part number before buying a used module.
_years covers only 2015-2018 for this generation
Compatible donor years: 2015, 2016, 2017, 2018
Always match the full part number before buying a used module.
_years covers only 2019 for this generation
Compatible donor years: 2019
Donor must match part family ~89990-0C060 (VERIFY VIA TIS); VIN-locked
Always match the full part number before buying a used module.
_years covers only 2020 for this generation
Compatible donor years: 2020
Donor must match part family ~89990-0C060 (VERIFY 2020 SUFFIX VIA TIS); VIN-locked
Always match the full part number before buying a used module.
_years covers only 2021 for this generation
Compatible donor years: 2021
Donor must match part family ~89990-0C060 (VERIFY 2021 SUFFIX VIA TIS); VIN-locked
Always match the full part number before buying a used module.
_years covers only 2007-2014 for this generation
Compatible donor years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Always match the full part number before buying a used module.
_years covers only 2007-2014 for this generation
Compatible donor years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Always match the full part number before buying a used module.
_years covers only 2015-2018 for this generation
Compatible donor years: 2015, 2016, 2017, 2018
Always match the full part number before buying a used module.
_years covers only 2015-2018 for this generation
Compatible donor years: 2015, 2016, 2017, 2018
Always match the full part number before buying a used module.
_years covers only 2019 for this generation
Compatible donor years: 2019
Always match the full part number before buying a used module.
_years covers only 2019 for this generation
Compatible donor years: 2019
Always match the full part number before buying a used module.
_years covers only 2020 for this generation
Compatible donor years: 2020
Always match the full part number before buying a used module.
_years covers only 2021 for this generation
Compatible donor years: 2021
Always match the full part number before buying a used module.
Use Toyota TIS and Techstream for this VIN. Smart Key ECU and Body ECU replacement may require authorization, all customer keys, key registration, immobilizer synchronization, and post-repair Smart Entry/start checks.
Yes. Core Auto Logic supports generation-scoped module programming for the Toyota Tundra (2007-2021). The merged generation data includes ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS coverage. Rows marked with a year range apply only to that part of the span; unmarked rows are present across the merged generation data.
The Toyota Tundra (2007-2021) generation currently shows 101 core module records across ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS groups. SRS examples include SRS Control Unit (2007), Airbag Control Module (ACM) (2008), and Driver Airbag Module (2008). Part numbers and module variants must be confirmed for your exact year/VIN. Reference part number: 45130-0C070-C0 (2007) - confirm for your exact year/VIN.
The merged generation data documents 31 ADAS systems, including Rear View Camera (2007), Rear View Camera (2008-2009), Rear View Camera (2010-2011), Rear View Camera (2012-2014), and Rear View Camera (2015-2018). Calibration triggers include ECM Replacement (2007-2014), Skid Control ECU Replacement (2007-2014), Windshield Replacement (2015-2018), and Forward Camera Replacement (2015-2018). Procedure type is VIN-specific scan-tool procedure; verify exact requirements by VIN before setup.
Yes. The generation data includes 40 SRS records, including SRS Control Unit (2007), Airbag Control Module (ACM) (2008), and Driver Airbag Module (2008). Bench reset, cloning, and replacement setup are handled after part-number review. Any SRS part number shown for this generation is planning data only - confirm for your exact year/VIN. Reference part number: 45130-0C070-C0 (2007) - confirm for your exact year/VIN.
No assumption should be made across the full span. The generation page merges rows across 2007-2021; any row that does not span all data-bearing years is printed with its year range or treated as varies by year - verify by VIN. Part numbers always require exact year/VIN confirmation before ordering, cloning, or programming.
Yes, where the VIN and security workflow support it. The generation data includes 15 gateway, immobilizer, or key-security records. Key records are present in the merged generation data. Security access, all-keys-lost eligibility, and add-key workflows vary by year - verify by VIN.
Most programming, cloning, SRS, and calibration jobs are quoted after VIN, DTC, part number, and repair-scope review. Labor time varies by year - verify by VIN before scheduling. Mail-in module work typically depends on module condition, donor data, and shipping window.
Both paths are available depending on the job. Mobile service covers DFW on-vehicle diagnostics, ADAS setup, key programming, and post-repair coding. Mail-in service covers ECU, BCM, SRS, TCU, ABS, and other bench module work nationwide. We confirm the correct path for your exact year/VIN before scheduling.