3,200+ Vehicles Supported

1-Year Unlimited Guarantee

DFW Mobile Service

DFW Serving Dallas / Fort Worth

2021 Ram 1500 Supported Services

2021 Ram 1500

ADAS calibration, module programming, and security relearns

Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.

Technical snapshot

Platform RAM DT (5th Gen, 2021)
CAN Architecture CAN-C (500kbps HS-CAN) + CAN-IHS + LIN bus; OBD2 DLC Pin 6/14 CAN-C 500kbps
Security Chrysler RFHUB/SKREEM - 128-bit rolling code, 315MHz RF (US); PEM on Laramie+; no OBD PIN extraction; AKL via wiTECH + DealerConnect

Get a Quote See Supported Modules

What do you need fixed?

Choose a service to start your quote.

Fix my ECUEngine computer Fix my TCMTransmission computer Repair my BCMBody electronics Code my vehicleCustom coding Repair a moduleElectronic module repair

OVERVIEW

Expert ADAS calibration, module programming, and diagnostic recovery for the 2021 RAM 1500. On this vehicle we cover documented systems include Forward Camera (Monocular), Forward Radar (77GHz), and Blind Spot Monitor Sensor - Left (BSM), this RAM DT (5th Gen, 2021) platform vehicle, Chrysler SKREEM/RFHUB Gen 3 (128-bit rolling code) immobilizer support, Uconnect 4C infotainment programming. Mobile across the DFW Metroplex; mail-in module service is available nationwide.

Platform

RAM DT (5th Gen, 2021)

Production

2011-present

Trim Levels

Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.

Drivetrain

RWD / 4WD

Engine

CAN Speed

CAN-C (500kbps HS-CAN) + CAN-IHS + LIN bus; OBD2 DLC Pin 6/14 CAN-C 500kbps

YEAR-SPECIFIC NOTES

VIN / Build Split

VIN pos 4-8 identifies model/engine/restraint. Ram WMI: 1C6, 3C6 (Ram truck). Position 4-5 = model. Position 10 = model year code.

Infotainment

Uconnect 4C

SERVICE SNAPSHOT

Exact-year service summary for 2021 RAM 1500

ADAS coverage

This 2021 RAM 1500 page documents 7 ADAS systems, including Forward Camera (Monocular), Forward Radar (77GHz), Blind Spot Monitor Sensor - Left (BSM), and Blind Spot Monitor Sensor - Right (BSM).

View ADAS data

Calibration triggers

Documented calibration triggers include Windshield Replacement (ADAS Equipped), Forward Camera Replacement, Forward Radar Replacement, and BSM Sensor Replacement (either side). Use the ADAS tab for the full trigger list.

View triggers

Programmable modules

This page indexes 32 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and IPC coverage.

View modules

Gateway and security

This page includes 6 gateway, immobilizer, or key-security records for this 2021 RAM 1500.

View security

Core Auto Logic capability

Core Auto Logic supports exact-year diagnostics, ADAS calibration, module programming, and security-access planning for the 2021 RAM 1500 using the documented systems and module data on this page.

Choose a section

EXACT-YEAR DIFFERENTIATORS

What changes on this exact year

Feature availability

DT SafetyTec: Forward Collision Alert + Automatic Emergency Braking, Blind Spot - Available; Platform: RAM DT (5th Gen, 2021) - Confirmed; Cylinder Deactivation Delete - Available

Driver-assist suite

DT SafetyTec: Forward Collision Alert + Automatic Emergency Braking, Blind Spot Detection, Rear Cross Path Detection, Adaptive Cruise, Lane Departure Warning; Surround View 4-camera available (Laramie+, Uconnect 12" required); ParkSense ultrasonic

VIN and build split

VIN pos 4-8 identifies model/engine/restraint. Ram WMI: 1C6, 3C6 (Ram truck). Position 4-5 = model. Position 10 = model year code.

Infotainment context

Uconnect 4C; Uconnect 5 available 2021 on Laramie+ (12" or 10.1"); Uconnect 4 on lower trims; Apple CarPlay + Android Auto standard

Network and access

CAN: CAN-C (500kbps HS-CAN) + CAN-IHS + LIN bus; OBD2 DLC Pin 6/14 CAN-C 500kbps

TOOL ACCESS MATRIX

Tool access for this exact year

Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.

Factory scan, coding, and calibration access

Stellantis wiTECH 2.0

Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.

ADAS scan, setup, and verification

Autel, Launch Tech, Topdon

Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.

Bench cloning and chip-level recovery

Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog

Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.

Bench/chip-level only

Choose a section to view data

SUPPORTED SYSTEMS

What we service on this vehicle

Documented module coverage for the 2021 Ram 1500. Counts reflect modules our techs have programmed or calibrated on this exact platform.

ADAS Calibration

7 modules documented

Forward camera, radar, surround-view and lane-keep recalibration after windshield, suspension or fascia work.

Open ADAS tab

Engine / ECU Programming

7 modules documented

Powertrain reprogramming, calibration updates, replacement ECU configuration and security access.

Open Modules tab

BCM / Body Programming

3 modules documented

Body control module, gateway and accessory programming. Includes feature-bit reconfiguration.

Open Modules tab

TCU / Transmission

1 module documented

Transmission control module reprogramming, adaptive learning reset and replacement TCM clone.

Open Modules tab

SRS / Airbag Reset

4 modules documented

Crash-data clear, hard-code reset and replacement airbag module configuration.

Open Modules tab

ABS / Brake Module

4 modules documented

ABS / EBCM bleed support, replacement module coding and yaw-rate sensor calibration.

Open Modules tab

IPC, SAS & Other Modules

9 modules documented

Instrument cluster cloning, steering angle sensor calibration and other supporting modules.

Open Modules tab

Connectivity & Accessories

4 modules documented

Infotainment radio, surround view, remote start, trailer brake controller and other equipped systems.

Open Modules tab

Recalibration Triggers

15 modules documented

Service events that require ADAS recalibration on this vehicle. Tap to see what triggers what.

Open ADAS tab

Need something not listed? Most undocumented modules can still be programmed.

Get a Quote

Feature availability 3

DT SafetyTec: Forward Collision Alert + Automatic Emergency Braking, Blind Spot

Available

Calibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.

Platform: RAM DT (5th Gen, 2021)

Confirmed

Verify platform code matches when cross-referencing part numbers across model years.

Cylinder Deactivation Delete

Available

Applicable to 5.7L HEMI V8. Also called MDS Delete.

WHAT WE RESOLVE

Common issues on this vehicle

Common RAM 1500 issues we resolve on this platform: Forward Camera (Monocular), Forward Radar (77GHz), Blind Spot Monitor Sensor - Left (BSM), and Blind Spot Monitor Sensor - Right (BSM) recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - RAM DT (5th Gen, 2021) platform uses CAN-C (500kbps HS-CAN) + CAN-IHS + LIN bus; OBD2 DLC Pin 6/14 CAN-C 500kbps.

ADAS CALIBRATION MATRIX

ADAS systems on this vehicle

Scroll for part numbers and Details

System	Type	Category	Cal. Type	Supported	Part #
Forward Camera (Monocular)	Camera	ADAS	Static	YES	~68382478 (VERIFY VIA OUR DIAGNOSTIC SOFTWARE)
Forward Radar (77GHz)	Radar	ADAS	Static + Dynamic	YES	~68437880 (VERIFY VIA OUR DIAGNOSTIC SOFTWARE)
Blind Spot Monitor Sensor - Left (BSM)	Radar	ADAS	Static + Dynamic	YES	~68394883 (VERIFY VIA OUR DIAGNOSTIC SOFTWARE)
Blind Spot Monitor Sensor - Right (BSM)	Radar	ADAS	Static + Dynamic	YES	~68394884 (VERIFY VIA OUR DIAGNOSTIC SOFTWARE)
Surround View Camera System (NEW 2021, if equipped)	Camera	ADAS	Static	YES	-
ParkSense Ultrasonic Sensors	Ultrasonic	ADAS	None	YES	-
Rear View Camera	Camera	ADAS	Static	YES	-

WHEN IS CALIBRATION REQUIRED?

Triggers for ADAS recalibration

Windshield Replacement (ADAS Equipped)

Forward camera static cal via wiTECH. Level surface, ~25 ft target. FCA and LDW function verify.

Forward Camera Replacement

wiTECH ADAS init + static cal. Same as windshield R&R procedure.

Forward Radar Replacement

wiTECH radar alignment. Level, no obstructions. Bumper R&I as needed.

BSM Sensor Replacement (either side)

wiTECH BSD init. Fixed mount. DTC clear. Road verify 20+ mph.

Surround View Camera Replacement (if equipped)

wiTECH surround view system init + camera-specific calibration. Requires Uconnect 12" active. Verify all 4 views display correctly.

BCM or TIPM Replacement

wiTECH flash + PROXI alignment. All options reconfigured including Surround View, eTorque, remote start, PEM.

ECM Replacement

wiTECH flash + DealerConnect calibration + PROXI VIN tie. Engine-specific: MDS (5.7L), TRX supercharger cal, diesel IQA, eTorque BSG. TRX: use TRX-specific calibration only.

TCM Replacement

wiTECH flash + PROXI + adaptive reset. TRX TR-9070: separate TRX-specific procedure.

ORC Replacement

wiTECH ORC init. REPLACE ONLY. All SRS DTC clear.

ABS / ESC Module Replacement

wiTECH init + 4-wheel bleed + SAS zero-point. Drive 25+ mph straight.

Wheel Alignment / Steering Component

SAS zero-point via wiTECH. Drive straight 25+ mph.

Any Front-End Collision

Inspect and recalibrate forward camera after any front-end collision using wiTECH2.

Front Bumper Repair or Replacement

Forward radar angular alignment required after front bumper R&R. Use wiTECH2.

Rear Bumper Repair or Replacement

BSD radar alignment required after rear bumper R&R. Use wiTECH2.

Mirror Replacement

Surround view mirror camera recalibration required after mirror R&R. Use wiTECH2.

SRS Modules

Occupant Restraint Controller (ORC) 68473844AB

Part number: 68473844AB
Location: Under center console
Manufacturer: Continental
Notes: Requires Witech or compatible J2534 tool. ProxyAlignment may be required after module replacement. ORC VIN programming required.

Request help with this module

Occupant Restraint Controller (ORC) 68500728AA

Part number: 68500728AA
Location: Under center console
Manufacturer: Continental
Notes: Requires Witech or compatible J2534 tool. ProxyAlignment may be required after module replacement. ORC VIN programming required.

Request help with this module

Occupant Restraint Controller (ORC) 6505190AA

Part number: 6505190AA
Location: Under center console
Manufacturer: Continental
Notes: Requires Witech or compatible J2534 tool. ProxyAlignment may be required after module replacement. ORC VIN programming required.

Request help with this module

Occupant Restraint Controller (ORC) 68311393AA

Part number: 68311393AA
Location: Under center console
Manufacturer: Continental
Notes: Requires Witech or compatible J2534 tool. ProxyAlignment may be required after module replacement. ORC VIN programming required.

Request help with this module

ECU Modules

ECM - 3.6L Pentastar V6 (2019-2021) 1 record

Part number: ~68381 (VERIFY VIA DEALERCONNECT)
Notes: wiTECH flash + PROXI. Throttle adaptation reset. eTorque BSG reset if equipped. Final year of this ECM variant - 2022 uses updated part.

Request help with this module

ECM - 5.7L HEMI V8 1 record

Part number: ~68439 (VERIFY VIA DEALERCONNECT)
Notes: wiTECH flash + PROXI. MDS adaptation reset. eTorque BSG reset if equipped.

Request help with this module

ECM - 6.4L HEMI TRX (NEW 2021 - supercharged) 1 record

Part number: ~68480 (VERIFY VIA DEALERCONNECT - TRX SPECIFIC)
Notes: TRX supercharged 6.4L HEMI. Separate ECM calibration - DO NOT use standard 5.7L or 6.4L Hellcat files. wiTECH TRX-specific calibration download + PROXI alignment. TREMEC TR-9070 10-speed DCT paired TCM also requires programming. (verify via wiTECH/DealerConnect)

Request help with this module

ECM - 3.0L EcoDiesel V6 1 record

Part number: ~68491 (VERIFY VIA DEALERCONNECT)
Notes: wiTECH flash + PROXI. Diesel IQA injector data entry. DPF regeneration enable. Glow plug check.

Request help with this module

eTorque BSG Module (48V, if equipped) 1 record

Part number: ~68484 (VERIFY VIA DEALERCONNECT)
Notes: 48V system. High-voltage precautions. Disconnect 48V battery before service. wiTECH BSG programming + adaptation reset.

Request help with this module

TCM - 8HP75 (standard non-TRX) 1 record

Part number: ~68436 (VERIFY VIA DEALERCONNECT)
Notes: wiTECH flash + PROXI + adaptive data reset. 500-mile relearn.

Request help with this module

TCM - TREMEC TR-9070 (TRX only) 1 record

Notes: 10-speed DCT for TRX. wiTECH TRX-specific TCM programming. Separate shift adaptation reset procedure. (verify via wiTECH/DealerConnect)

Request help with this module

BCM Modules

Body Control Module (BCM) ~68414 (VERIFY VIA DEALERCONNECT)

Part number: ~68414 (VERIFY VIA DEALERCONNECT)
Notes: wiTECH flash + PROXI alignment. VIN tie. All options including Surround View, eTorque config. Not plug and play.

Request help with this module

TIPM (Totally Integrated Power Module) ~68437 (VERIFY VIA DEALERCONNECT)

Part number: ~68437 (VERIFY VIA DEALERCONNECT)
Notes: Engine bay. wiTECH flash + PROXI alignment. Verify all circuits.

Request help with this module

PEM (Proximity Entry Module) ~68379 (VERIFY VIA DEALERCONNECT)

Part number: ~68379 (VERIFY VIA DEALERCONNECT)
Notes: wiTECH programming + key re-registration. Laramie+.

Request help with this module

TCU / TCM Transmission Modules

TCU - ZF 8HP75 8-Speed Auto 68366178

Part number: 68366178
Protocol / method: Bench
Coding required: Yes
Cloning supported: Yes
Chip / MCU: Infineon TC1797
Notes: ZF 8HP75. Bench cloning. wiTECH 2.0 programming. ZF LifeGuard 8 ATF. VIN coding required. TRX uses reinforced 8HP95.

Request help with this module

ABS / Brake Modules

ABS/ESC Module (Continental MK100) ~68482 (VERIFY VIA DEALERCONNECT)

Part number: ~68482 (VERIFY VIA DEALERCONNECT)
Notes: wiTECH init + 4-wheel bleed + SAS zero-point calibration. Drive 25+ mph straight. TRX: verify TRX-specific ABS variant part number separately.

Request help with this module

Wheel Speed Sensor - Front (each) ~68330 (VERIFY VIA DEALERCONNECT)

Part number: ~68330 (VERIFY VIA DEALERCONNECT)
Notes: Torque per WSM. wiTECH DTC clear. Road test 15+ mph.

Request help with this module

Wheel Speed Sensor - Rear (each) ~68330 REAR (VERIFY VIA DEALERCONNECT)

Part number: ~68330 REAR (VERIFY VIA DEALERCONNECT)
Notes: Same procedure as front.

Request help with this module

Brake Pressure Modulator (HCU)

Notes: wiTECH automated bleed. Firm pedal verify before road test.

Request help with this module

Other Modules (IPC, SAS)

Instrument Panel Cluster (IPC) 8 records

68492413AB

Part number: 68492413AB
Cloning supported: Yes
Notes: IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.

Request help with this module

68492429AB

Part number: 68492429AB
Cloning supported: Yes
Notes: IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.

Request help with this module

68492410AA

Part number: 68492410AA
Cloning supported: Yes
Notes: IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.

Request help with this module

68492411AA

Part number: 68492411AA
Cloning supported: Yes
Notes: IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.

Request help with this module

68492414AA

Part number: 68492414AA
Cloning supported: Yes
Notes: IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.

Request help with this module

68492417AA

Part number: 68492417AA
Cloning supported: Yes
Notes: IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.

Request help with this module

68492424AA

Part number: 68492424AA
Cloning supported: Yes
Notes: IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.

Request help with this module

68492428AB

Part number: 68492428AB
Cloning supported: Yes
Notes: IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.

Request help with this module

Steering Angle Sensor (SAS) 1 record

Coding required: Yes
Notes: INTEGRATED (SCCM clock spring) - Mopar 68442088AC

Request help with this module

Connectivity & Accessories

Uconnect 5 (12" / 10.1" - Laramie+)

Notes: Uconnect 5 introduced on 2021 Laramie+. wiTECH radio init if replaced. CarPlay/Android Auto re-pair. VIN registration if required. OTA software updates available on Uconnect 5.

Request help with this module

Surround View ECU / Cameras (if equipped) OEM (VERIFY VIA DEALERCONNECT - 4-CAMERA SYSTEM)

Part number: OEM (VERIFY VIA DEALERCONNECT - 4-CAMERA SYSTEM)
Notes: wiTECH surround view system init + individual camera calibration after any camera replacement. Requires Uconnect 12" display.

Request help with this module

Remote Start (OEM RKE-based)

Notes: BCM PROXI enables. wiTECH reconfigure after BCM replacement.

Request help with this module

Trailer Brake Controller

Notes: wiTECH config. Uconnect gain adjust. 7-pin verify.

Request help with this module

ARCHITECTURE & CONNECTIVITY

Architecture & Connectivity

Body Construction: Body-on-frame; high-strength steel ladder frame; aluminum/steel mixed body panels
OBD Protocol: ISO 15765-4 CAN (500 kbps HS-CAN)
CAN Architecture: CAN-C (500kbps HS-CAN) + CAN-IHS + LIN bus; OBD2 DLC Pin 6/14 CAN-C 500kbps
Infotainment: Uconnect 5 available 2021 on Laramie+ (12" or 10.1"); Uconnect 4 on lower trims; Apple CarPlay + Android Auto standard
OTA Capable: No
Infotainment Name: Uconnect 4C
ECU/TCM Unlocking: Contact us
ECU/TCM Flashing: Confirmed
Reviewed coverage: 2021 - 5.7L HEMI V8 e-Torque.
Confirm the exact engine, ECU, and any prerequisite access method before service.
Cylinder Deactivation Delete (MDS Delete): Confirmed
Reviewed coverage: 2021 - 5.7L HEMI V8.
Confirm the 5.7L engine and Fuel Saver or MDS equipment by VIN before service.

OPENPILOT / COMMA.AI

Openpilot Compatibility

Not Supported

Officially supported (openpilot master)

Package: Adaptive Cruise Control
Hardware: Comma 3X + FCA harness
Harness: FCA Harness

5th Gen Ram 1500. 2025+ facelift not yet confirmed.

FREQUENTLY ASKED QUESTIONS

FAQ

How much does ADAS calibration cost for a 2021 RAM 1500?

ADAS calibration pricing for a 2021 RAM 1500 depends on which of its 7 documented systems need work after a repair. This vehicle is documented with Forward Camera (Monocular), Forward Radar (77GHz), Blind Spot Monitor Sensor - Left (BSM), Blind Spot Monitor Sensor - Right (BSM), and Surround View Camera System (NEW 2021, if equipped). We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.

Can you reset the airbag light on a 2021 RAM 1500?

Yes. The 2021 RAM 1500 uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: 68473844AB. Mobile diagnosis and programming are available in DFW, and mail-in module service is available nationwide. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.

What is needed after replacing the windshield on a 2021 RAM 1500?

After windshield replacement on a 2021 RAM 1500, Forward Camera (Monocular), Forward Radar (77GHz), Surround View Camera System (NEW 2021, if equipped), and Rear View Camera rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in module service is available nationwide for eligible module work.

How long does a 2021 RAM 1500 module service take?

Most 2021 RAM 1500 onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 31 programmable modules documented in our database (7 ECU, 3 BCM, 1 TCU, 4 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module service is available nationwide.

Do you cover the 2021 RAM 1500 on-site, or is this mail-in only?

We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, post-repair recoding, and supported module work). Mail-in module service is available nationwide. Quote the work and we will confirm the active service path for the 2021 RAM 1500. Do not ship a module unless support confirms next steps.

What kind of warranty do you offer on 2021 RAM 1500 programming?

Every programming, cloning, and calibration job on the 2021 RAM 1500 is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.

Which modules on a 2021 RAM 1500 can you actually service?

We program, clone, repair, or replace the full programmable-module stack on a 2021 RAM 1500. For this vehicle our database documents:

7 engine control (ECU/PCM)
1 transmission control (TCU/TCM)
3 body control (BCM and related)
4 ABS / brake control (EBCM)
3 immobilizer / security
3 key & fob
8 instrument cluster (IPC)
1 steering angle sensor (SAS)
7 ADAS module

Infotainment on this platform: Uconnect 4C. Send the VIN and the operations performed and we will confirm support and pricing.

OTHER MODEL YEARS

2026 2025 2024 2023 2022 2020 2019 2018 2017 2016 2021

OTHER RAM MODELS

2500 Trx Promaster Promaster-EV 3500

Additional Module Part Numbers

Additional OEM-sourced part numbers for the 2021 Ram 1500 covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.

ADAS Module Part Numbers: 68318033AI
ECU / PCM Part Numbers: 68434932AB, 68434933AB, 68434939AB
BCM / Body Module Part Numbers: ~68414 (VERIFY VIA DEALERCONNECT), ~68437 (VERIFY VIA DEALERCONNECT), ~68379 (VERIFY VIA DEALERCONNECT)
TCU / TCM Part Numbers: 68366178
SRS / Airbag Module Part Numbers: 68473844AB, 68500728AA, 6505190AA, 68311393AA
ABS / EBCM Part Numbers: 68623974AB
Instrument Cluster (IPC) Part Numbers: 68492413AB, 68492429AB, 68492410AA, 68492411AA, 68492414AA, 68492417AA, 68492424AA, 68492428AB
Transmission Control Module (TCM) Part Numbers: 68366178
Steering Angle Sensor (SAS) Part Numbers: INTEGRATED (SCCM CLOCK SPRING) - MOPAR 68442088AC

Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.