VIN / Build Split
VIN pos 4-8 identifies model/engine/restraint. Ram WMI: 1C6, 3C6 (Ram truck). Position 4-5 = model. Position 10 = model year code.
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
DFW Mobile Service
DFW Serving Dallas / Fort Worth
2019 Ram 1500 Supported Services
2019 Ram 1500
ADAS calibration, module programming, and security relearns
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Technical snapshot
- Platform RAM DT (5th Gen, 2019)
- CAN Architecture CAN-C (500kbps HS-CAN) + CAN-IHS (Interior High Speed) + LIN bus; OBD2 DLC Pin 6/14 CAN-C 500kbps
- Security Chrysler RFHUB/SKREEM - 128-bit rolling code, 315MHz RF (US); Proximity Entry Module (PEM) on equipped trims; no OBD PIN extraction; AKL via wiTECH 2.0 + DealerConnect dealer authorization
What do you need fixed?
Choose a service to start your quote.
OVERVIEW
Expert ADAS calibration, module programming, and diagnostic recovery for the 2019 RAM 1500. On this vehicle we cover documented systems include Forward Camera (Monocular), Forward Radar (77GHz), and Blind Spot Monitor Sensor - Left (BSM), this RAM DT (5th Gen, 2019) platform vehicle, Chrysler SKREEM/RFHUB Gen 3 (128-bit rolling code) immobilizer support, Uconnect 4C infotainment programming. Mobile across the DFW Metroplex; mail-in module service is available nationwide.
Platform
RAM DT (5th Gen, 2019)
Production
2011-present
Trim Levels
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Drivetrain
RWD / 4WD
Engine
-
CAN Speed
CAN-C (500kbps HS-CAN) + CAN-IHS (Interior High Speed) + LIN bus; OBD2 DLC Pin 6/14 CAN-C 500kbps
YEAR-SPECIFIC NOTES
Infotainment
Uconnect 4C
Exact-year service summary for 2019 RAM 1500
ADAS coverage
This 2019 RAM 1500 page documents 6 ADAS systems, including Forward Camera (Monocular), Forward Radar (77GHz), Blind Spot Monitor Sensor - Left (BSM), and Blind Spot Monitor Sensor - Right (BSM).
View ADAS dataCalibration triggers
Documented calibration triggers include Windshield Replacement (if ADAS Camera Equipped), Forward Camera Replacement, Forward Radar Replacement, and BSD Rear Sensor Replacement (either side). Use the ADAS tab for the full trigger list.
View triggersProgrammable modules
This page indexes 24 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and IPC coverage.
View modulesGateway and security
This page includes 6 gateway, immobilizer, or key-security records for this 2019 RAM 1500.
View securityCore Auto Logic capability
Core Auto Logic supports exact-year diagnostics, ADAS calibration, module programming, and security-access planning for the 2019 RAM 1500 using the documented systems and module data on this page.
Choose a sectionWhat changes on this exact year
Feature availability
Available DT SafetyTec: Forward Collision Warning + Automatic Emergency Braking, - Available; Platform: RAM DT (5th Gen, 2019) - Confirmed
Driver-assist suite
Available DT SafetyTec: Forward Collision Warning + Automatic Emergency Braking, Blind Spot Detection, Rear Cross Path Detection, Adaptive Cruise, Lane Departure Warning; ParkSense front/rear ultrasonic; 360-degree surround NOT yet available 2019
VIN and build split
VIN pos 4-8 identifies model/engine/restraint. Ram WMI: 1C6, 3C6 (Ram truck). Position 4-5 = model. Position 10 = model year code.
Infotainment context
Uconnect 4C; Uconnect 4 (8.4" or 12" optional on Laramie+), Apple CarPlay + Android Auto; Ram Box and off-road screens available on TRX/Sport
Network and access
CAN: CAN-C (500kbps HS-CAN) + CAN-IHS (Interior High Speed) + LIN bus; OBD2 DLC Pin 6/14 CAN-C 500kbps
Tool access for this exact year
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
Factory scan, coding, and calibration access
Stellantis wiTECH 2.0
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
ADAS scan, setup, and verification
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Bench cloning and chip-level recovery
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Choose a section to view data
SUPPORTED SYSTEMS
What we service on this vehicle
Documented module coverage for the 2019 Ram 1500. Counts reflect modules our techs have programmed or calibrated on this exact platform.
ADAS Calibration
6 modules documented
Forward camera, radar, surround-view and lane-keep recalibration after windshield, suspension or fascia work.
Open ADAS tabEngine / ECU Programming
5 modules documented
Powertrain reprogramming, calibration updates, replacement ECU configuration and security access.
Open Modules tabBCM / Body Programming
3 modules documented
Body control module, gateway and accessory programming. Includes feature-bit reconfiguration.
Open Modules tabTCU / Transmission
1 module documented
Transmission control module reprogramming, adaptive learning reset and replacement TCM clone.
Open Modules tabSRS / Airbag Reset
3 modules documented
Crash-data clear, hard-code reset and replacement airbag module configuration.
Open Modules tabABS / Brake Module
4 modules documented
ABS / EBCM bleed support, replacement module coding and yaw-rate sensor calibration.
Open Modules tabIPC, SAS & Other Modules
4 modules documented
Instrument cluster cloning, steering angle sensor calibration and other supporting modules.
Open Modules tabConnectivity & Accessories
4 modules documented
Infotainment radio, surround view, remote start, trailer brake controller and other equipped systems.
Open Modules tabRecalibration Triggers
15 modules documented
Service events that require ADAS recalibration on this vehicle. Tap to see what triggers what.
Open ADAS tabNeed something not listed? Most undocumented modules can still be programmed.
Get a QuoteFeature availability 2
Available DT SafetyTec: Forward Collision Warning + Automatic Emergency Braking
AvailableCalibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.
Platform: RAM DT (5th Gen, 2019)
ConfirmedVerify platform code matches when cross-referencing part numbers across model years.
WHAT WE RESOLVE
Common issues on this vehicle
Common RAM 1500 issues we resolve on this platform: Forward Camera (Monocular), Forward Radar (77GHz), Blind Spot Monitor Sensor - Left (BSM), and Blind Spot Monitor Sensor - Right (BSM) recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - RAM DT (5th Gen, 2019) platform uses CAN-C (500kbps HS-CAN) + CAN-IHS (Interior High Speed) + LIN bus; OBD2 DLC Pin 6/14 CAN-C 500kbps.
ADAS CALIBRATION MATRIX
ADAS systems on this vehicle
Available DT SafetyTec: Forward Collision Warning + Automatic Emergency Braking, Blind Spot Detection, Rear Cross Path Detection, Adaptive Cruise, Lane Departure Warning; ParkSense front/rear ultrasonic; 360-degree surround NOT yet available 2019
Scroll for part numbers and Details
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Forward Camera (Monocular) | Camera | ADAS | Static | YES | ~68382478 (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Forward Radar (77GHz) | Radar | ADAS | Static + Dynamic | YES | ~68437880 (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Blind Spot Monitor Sensor - Left (BSM) | Radar | ADAS | Static + Dynamic | YES | ~68394883 (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Blind Spot Monitor Sensor - Right (BSM) | Radar | ADAS | Static + Dynamic | YES | ~68394884 (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| ParkSense Ultrasonic Sensors (Front/Rear) | Ultrasonic | ADAS | None | YES | - | |
| Rear View Camera | Camera | ADAS | Static | YES | - |
ADAS SYSTEM
YES Supported
Identification
- System type
- Module category
- Sensor location
Part Numbers
- OEM
- Alternative
Calibration & Triggers
- Calibration type
- Programming approach
- Requires PMI
- Trigger events
Technical Notes
- Chip / MCU
- Service notes
Need this calibrated?
Get a quote for ADAS calibration WHEN IS CALIBRATION REQUIRED?
Triggers for ADAS recalibration
Windshield Replacement (if ADAS Camera Equipped)
Forward camera static calibration required via wiTECH ADAS module. Vehicle on level surface. ~25 ft forward target placement per wiTECH procedure. No obstructions in front of vehicle. Calibration takes ~5-10 min. Verify Forward Collision Warning and LDW function post-calibration.
Forward Camera Replacement
wiTECH ADAS camera initialization + static calibration. Same procedure as windshield R&R. Verify camera bracket not damaged during windshield work.
Forward Radar Replacement
wiTECH ADAS radar alignment procedure. Level surface, no metallic obstructions in FOV. Bumper R&I may be required for access. (verify via wiTECH/DealerConnect)
BSD Rear Sensor Replacement (either side)
wiTECH BSD module initialization. Fixed mount - no physical aiming required. DTC clear. Road verify BSD and RCPD at 20+ mph.
BCM or TIPM Replacement
wiTECH flash programming + PROXI alignment mandatory. VIN tie + all vehicle options configured via PROXI. Remote start, heated seats, PEM, trailer all reconfigured. Key re-registration if PEM-related.
ECM Replacement
wiTECH flash + DealerConnect calibration download + PROXI alignment (VIN tie). MDS/eTorque adaptation reset (if equipped). Throttle body adaptation reset. Diesel: IQA injector data entry.
TCM Replacement
wiTECH flash + PROXI alignment. Adaptive data reset - 500-mile normal driving relearn recommended. Verify no harsh shift complaints after adaptive reset.
ORC (SRS ECU) Replacement
wiTECH ORC initialization after installation. Hard deployment = REPLACE ONLY - no crash data clear. Verify all SRS DTC clear before delivery. Torque ORC mounting bolts per WSM.
ABS / ESC Module Replacement
wiTECH ABS initialization + 4-wheel brake bleed + SAS zero-point calibration. Drive 25+ mph straight on level surface for SAS learning. Verify ESC and ABS warning lamps extinguish.
Wheel Alignment / Steering Component R&R
SAS (Steering Angle Sensor) zero-point calibration via wiTECH after any alignment or steering component replacement. Drive straight at 25+ mph to complete.
Any Front-End Collision
Inspect and recalibrate forward camera after any front-end collision using wiTECH2.
Front Bumper Repair or Replacement
Forward radar angular alignment required after front bumper R&R. Use wiTECH2.
Rear Bumper Repair or Replacement
BSD radar alignment required after rear bumper R&R. Use wiTECH2.
BSM Sensor Replacement
Blind spot monitoring sensor replacement requires calibration using wiTECH2.
Mirror Replacement
If BSD sensor is mirror-integrated, recalibration required. Verify sensor location; use wiTECH2 if applicable.
SRS Modules
Occupant Restraint Controller (ORC) 68441329AB
- Part number
- 68441329AB
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires Witech or compatible J2534 tool. ProxyAlignment may be required after module replacement. ORC VIN programming required.
Occupant Restraint Controller (ORC) 6505190AA
- Part number
- 6505190AA
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires Witech or compatible J2534 tool. ProxyAlignment may be required after module replacement. ORC VIN programming required.
Occupant Restraint Controller (ORC) 68311393AA
- Part number
- 68311393AA
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires Witech or compatible J2534 tool. ProxyAlignment may be required after module replacement. ORC VIN programming required.
ECU Modules
ECM - 3.6L Pentastar V6 (2019-2021) ~68381 (VERIFY VIA DEALERCONNECT)
- Part number
- ~68381 (VERIFY VIA DEALERCONNECT)
- Notes
- wiTECH 2.0 flash programming via Programming Port + DealerConnect calibration download. PROXI alignment after replacement (VIN tie). Throttle body adaptation reset via wiTECH. If eTorque equipped: BSG module adaptation also requires reset. (verify via wiTECH/DealerConnect)
ECM - 5.7L HEMI V8 ~68439 (VERIFY VIA DEALERCONNECT)
- Part number
- ~68439 (VERIFY VIA DEALERCONNECT)
- Notes
- wiTECH flash programming + PROXI VIN tie. MDS (Multi-Displacement System) adaptation reset required after ECM replacement - wiTECH MDS adaptation procedure. If eTorque equipped: BSG coordination module reset also required. (verify via wiTECH/DealerConnect)
ECM - 3.0L EcoDiesel V6 (if equipped) ~68491 (VERIFY VIA DEALERCONNECT)
- Part number
- ~68491 (VERIFY VIA DEALERCONNECT)
- Notes
- Diesel-specific: wiTECH flash + DealerConnect calibration. PROXI VIN tie. Diesel injector adaptation data (IQA codes) must be entered post-replacement. DPF regeneration enable via wiTECH. Glow plug module check. (verify via wiTECH/DealerConnect)
eTorque BSG Module (48V mild hybrid, if equipped) ~68484 (VERIFY VIA DEALERCONNECT)
- Part number
- ~68484 (VERIFY VIA DEALERCONNECT)
- Notes
- Belt Starter-Generator on 3.6L and 5.7L eTorque variants. 48V system - high-voltage safety precautions required (disconnect 48V battery before service). wiTECH BSG programming + adaptation reset. (verify via wiTECH/DealerConnect)
TCM - 8HP75 8-Speed Automatic ~68436 (VERIFY VIA DEALERCONNECT)
- Part number
- ~68436 (VERIFY VIA DEALERCONNECT)
- Notes
- ZF 8HP75. wiTECH TCM flash programming + PROXI alignment. Transmission adaptive data reset required after TCM replacement - wiTECH adaptive reset procedure. 500-mile adaptive relearn cycle recommended post-reset. (verify via wiTECH/DealerConnect)
BCM Modules
Body Control Module (BCM) ~68414 (VERIFY VIA DEALERCONNECT)
- Part number
- ~68414 (VERIFY VIA DEALERCONNECT)
- Notes
- wiTECH flash programming + PROXI alignment after replacement. All vehicle options (heated seats, remote start, trailer, PEM) must be configured in BCM via wiTECH PROXI alignment. Coding required - NOT plug and play.
TIPM (Totally Integrated Power Module) ~68437 (VERIFY VIA DEALERCONNECT)
- Part number
- ~68437 (VERIFY VIA DEALERCONNECT)
- Notes
- Engine bay power distribution module. wiTECH flash programming + PROXI alignment after replacement. Controls fuse/relay functions. Verify all circuits and fuse assignments after replacement. (verify via wiTECH/DealerConnect)
PEM (Proximity Entry Module) ~68379 (VERIFY VIA DEALERCONNECT)
- Part number
- ~68379 (VERIFY VIA DEALERCONNECT)
- Notes
- Passive entry on Laramie+ and equipped trims. wiTECH PEM programming after replacement. Key re-registration via wiTECH + DealerConnect. (verify via wiTECH/DealerConnect)
TCU / TCM Transmission Modules
TCU - ZF 8HP75 8-Speed Auto 68366178
- Part number
- 68366178
- Protocol / method
- Bench
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Infineon TC1797
- Notes
- New DT generation. ZF 8HP75. Bench cloning supported. Requires wiTECH 2.0 for programming. ZF LifeGuard 8 ATF. VIN coding and shift adaptation required. eTorque mild hybrid integration on some models.
ABS / Brake Modules
ABS/ESC Module (Continental MK100) ~68482 (VERIFY VIA DEALERCONNECT)
- Part number
- ~68482 (VERIFY VIA DEALERCONNECT)
- Notes
- Continental MK100 ABS/ESC unit. wiTECH ABS module initialization after replacement. 4-wheel brake bleed (pressure or manual) required. Steering Angle Sensor (SAS) calibration required after replacement or after any wheel alignment - wiTECH SAS zero-point calibration. (verify via wiTECH/DealerConnect)
Wheel Speed Sensor - Front (each) ~68330 (VERIFY VIA DEALERCONNECT)
- Part number
- ~68330 (VERIFY VIA DEALERCONNECT)
- Notes
- Active magnetic WSS. Torque to WSM spec. wiTECH DTC clear + road test at 15+ mph to verify signal. (verify via wiTECH/DealerConnect)
Wheel Speed Sensor - Rear (each) ~68330 REAR VARIANT (VERIFY VIA DEALERCONNECT)
- Part number
- ~68330 REAR VARIANT (VERIFY VIA DEALERCONNECT)
- Notes
- Same procedure as front. Verify rear axle sensor routing - integrated in hub or backing plate depending on axle type.
Brake Pressure Modulator (HCU)
- Notes
- If HCU requires replacement as assembly: wiTECH automated bleed sequence preferred. Verify firm pedal before road test. No spongy pedal allowed.
Other Modules (IPC, SAS)
Instrument Panel Cluster (IPC) 68441320AB
- Part number
- 68441320AB
- Cloning supported
- Yes
- Notes
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Instrument Panel Cluster (IPC) 68441321AB
- Part number
- 68441321AB
- Cloning supported
- Yes
- Notes
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Steering Angle Sensor (SAS)
- Coding required
- Yes
- Notes
- INTEGRATED (clock spring / steering column module
Steering Angle Sensor (SAS)
- Coding required
- Yes
- Notes
- cross-year extension)
Connectivity & Accessories
Remote Start (OEM RKE-based)
- Notes
- Factory remote start via key fob sequence (RKE). BCM PROXI configuration enables/disables. wiTECH PROXI alignment after BCM replacement. Aftermarket remote start may conflict - verify OEM only.
Trailer Brake Controller (if equipped)
- Notes
- wiTECH configuration for trailer brake type. Gain adjustment via Uconnect interface. 7-pin trailer connector wiring verify.
Ram Box Bed Management (if equipped)
- Notes
- Lockable bed storage with power outlets. No calibration - wiTECH DTC check. BCM PROXI configuration for Ram Box option.
ARCHITECTURE & CONNECTIVITY
Architecture & Connectivity
- Body Construction
- Body-on-frame; high-strength steel ladder frame; aluminum/steel mixed body panels
- OBD Protocol
- ISO 15765-4 CAN (500 kbps HS-CAN)
- CAN Architecture
- CAN-C (500kbps HS-CAN) + CAN-IHS (Interior High Speed) + LIN bus; OBD2 DLC Pin 6/14 CAN-C 500kbps
- Infotainment
- Uconnect 4 (8.4" or 12" optional on Laramie+), Apple CarPlay + Android Auto; Ram Box and off-road screens available on TRX/Sport
- OTA Capable
- No
- Infotainment Name
- Uconnect 4C
- ECU/TCM Unlocking
- Contact us
- ECU/TCM Flashing
- Confirmed
Reviewed coverage: 2019 - 5.7L HEMI V8 e-Torque.
Confirm the exact engine, ECU, and any prerequisite access method before service.
FREQUENTLY ASKED QUESTIONS
FAQ
How much does ADAS calibration cost for a 2019 RAM 1500?
ADAS calibration pricing for a 2019 RAM 1500 depends on which of its 6 documented systems need work after a repair. This vehicle is documented with Forward Camera (Monocular), Forward Radar (77GHz), Blind Spot Monitor Sensor - Left (BSM), Blind Spot Monitor Sensor - Right (BSM), and ParkSense Ultrasonic Sensors (Front/Rear). We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.
Can you reset the airbag light on a 2019 RAM 1500?
Yes. The 2019 RAM 1500 uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: 68441329AB. Mobile diagnosis and programming are available in DFW, and mail-in module service is available nationwide. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.
What is needed after replacing the windshield on a 2019 RAM 1500?
After windshield replacement on a 2019 RAM 1500, Forward Camera (Monocular), Forward Radar (77GHz), and Rear View Camera rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in module service is available nationwide for eligible module work.
How long does a 2019 RAM 1500 module service take?
Most 2019 RAM 1500 onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 24 programmable modules documented in our database (5 ECU, 3 BCM, 1 TCU, 4 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module service is available nationwide.
Do you cover the 2019 RAM 1500 on-site, or is this mail-in only?
We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, post-repair recoding, and supported module work). Mail-in module service is available nationwide. Quote the work and we will confirm the active service path for the 2019 RAM 1500. Do not ship a module unless support confirms next steps.
What kind of warranty do you offer on 2019 RAM 1500 programming?
Every programming, cloning, and calibration job on the 2019 RAM 1500 is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
Which modules on a 2019 RAM 1500 can you actually service?
We program, clone, repair, or replace the full programmable-module stack on a 2019 RAM 1500. For this vehicle our database documents:
- 5 engine control (ECU/PCM)
- 1 transmission control (TCU/TCM)
- 3 body control (BCM and related)
- 4 ABS / brake control (EBCM)
- 3 immobilizer / security
- 3 key & fob
- 2 instrument cluster (IPC)
- 2 steering angle sensor (SAS)
- 6 ADAS module
Infotainment on this platform: Uconnect 4C. Send the VIN and the operations performed and we will confirm support and pricing.
Additional Module Part Numbers
Additional OEM-sourced part numbers for the 2019 Ram 1500 covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.
- ADAS Module Part Numbers
- 68446540AA, 68446541AA
- ECU / PCM Part Numbers
- 68447900AA, 68447901AA
- BCM / Body Module Part Numbers
- ~68414 (VERIFY VIA DEALERCONNECT), ~68437 (VERIFY VIA DEALERCONNECT), ~68379 (VERIFY VIA DEALERCONNECT)
- TCU / TCM Part Numbers
- 68366178
- SRS / Airbag Module Part Numbers
- 68441329AB, 6505190AA, 68311393AA
- ABS / EBCM Part Numbers
- 68441340AB, 68441341AB
- Instrument Cluster (IPC) Part Numbers
- 68441320AB, 68441321AB
- Transmission Control Module (TCM) Part Numbers
- 68366178
Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.
Different trim or build?
Send your VIN and we'll confirm exact module support and pricing in the quote response.
Hit a security wall? We've got the keys.
1-year unlimited warranty on every flash and calibration.
Shared module fitment
Vehicles sharing modules with the 2019 Ram 1500
These vehicles use one or more of the same replacement modules indexed for this vehicle.
Finish the repair
Need help finishing this repair?
Get onsite help in Dallas-Fort Worth. Ask about same-day availability or a one-time remote session for eligible non-VSP work.
wiTECH 2.0 Explore one-time factory coding and programming. We confirm the software and procedure for your vehicle. Module programming & recovery Replacing a module or dealing with a failed programming attempt? Send the part numbers and fault scan for review. Onsite tools & equipment Bring in a technician or ask about hourly, daily and weekly rentals where licensing and equipment availability allow.