Choose a make, model and year, or start with a VIN.
ADAS calibration, module programming, and security relearns
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Choose a service to start your quote.
This 2026 Porsche Macan page documents 4 ADAS systems, including Porsche Active Safe (PAS) - Front Radar, Lane Change Assist (LCA) / BSD - Rear Corner Radar, Front Camera - Lane Keep Assist / AEB, and Surround View Camera System.
View ADAS dataDocumented calibration triggers include Windshield Replacement, Front Bumper Repair or Replacement, Rear Bumper Repair, and Any Collision. Use the ADAS tab for the full trigger list.
View triggersThis page indexes 13 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and IPC coverage.
View modulesThis page includes 2 gateway, immobilizer, or key-security records for this 2026 Porsche Macan.
View securityCore Auto Logic supports exact-year diagnostics, ADAS calibration, module programming, and security-access planning for the 2026 Porsche Macan using the documented systems and module data on this page.
Choose a sectionVIN and build details determine exact service eligibility. A missing record does not mean we cannot help; ask about your vehicle.
VIN pos 4-8 identifies model/body/engine. Porsche WMI: WP0, WP1. Position 4-6 = model code. Position 10 = model year code.
Porsche PCM 6.0
CarPlay: Yes / Android Auto: Yes
Porsche Active Safe, Adaptive Cruise Control, Lane Keep Assist, Lane Change Assi - Standard; Platform: J1A (PPE - Confirmed
Porsche Active Safe, Adaptive Cruise Control, Lane Keep Assist, Lane Change Assist, Surround View standard, Park Assist, Night Vision (optional)
VIN pos 4-8 identifies model/body/engine. Porsche WMI: WP0, WP1. Position 4-6 = model code. Position 10 = model year code.
Porsche PCM 6.0; PCM 6.0 curved 12.9-inch display; Porsche Connect; OTA; Apple CarPlay / Android Auto; Porsche Digital Key
Wireless CarPlay: Yes; Wireless Android Auto: Yes
CAN: Porsche CAN FD; FlexRay (ADAS); LIN; Ethernet (gateway/PCM); 800V HV CAN bus
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
Porsche PIWIS 3 / Porsche PIWIS 4
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Choose a section to view data
Documented module coverage for the 2026 Porsche Macan. Counts reflect modules our techs have programmed or calibrated on this exact platform.
Forward camera, radar, surround-view and lane-keep recalibration after windshield, suspension or fascia work.
Open ADAS tabPowertrain reprogramming, calibration updates, replacement ECU configuration and security access.
Open Modules tabBody control module, gateway and accessory programming. Includes feature-bit reconfiguration.
Open Modules tabTransmission control module reprogramming, adaptive learning reset and replacement TCM clone.
Open Modules tabCrash-data clear, hard-code reset and replacement airbag module configuration.
Open Modules tabABS / EBCM bleed support, replacement module coding and yaw-rate sensor calibration.
Open Modules tabInstrument cluster cloning, steering angle sensor calibration and other supporting modules.
Open Modules tabInfotainment radio, surround view, remote start, trailer brake controller and other equipped systems.
Open Modules tabService events that require ADAS recalibration on this vehicle. Tap to see what triggers what.
Open ADAS tabNeed something not listed? Most undocumented modules can still be programmed.
Get a QuoteCalibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.
Verify platform code matches when cross-referencing part numbers across model years.
Common Porsche Macan issues we resolve on this platform: Porsche Active Safe (PAS) - Front Radar, Lane Change Assist (LCA) / BSD - Rear Corner Radar, Front Camera - Lane Keep Assist / AEB, and Surround View Camera System recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - J1A (PPE - Premium Platform Electric; 2nd Gen Macan BEV; NOT related to 95B ICE) platform uses Porsche CAN FD; FlexRay (ADAS); LIN; Ethernet (gateway/PCM); 800V HV CAN bus.
Porsche Active Safe, Adaptive Cruise Control, Lane Keep Assist, Lane Change Assist, Surround View standard, Park Assist, Night Vision (optional)
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Porsche Active Safe (PAS) - Front Radar | Front Radar | Radar | Static | YES | ~9YA-907-561-X J1A (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Lane Change Assist (LCA) / BSD - Rear Corner Radar | Side Radar | Radar | Static + Dynamic | YES | ~J1A REAR CORNER RADAR (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Front Camera - Lane Keep Assist / AEB | Forward Camera | Camera | Static | YES | ~J1A FORWARD CAMERA (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Surround View Camera System | Surround Camera | Camera | Static | YES | STANDARD ON MOST J1A TRIMS - (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) |
ADAS SYSTEM
Need this calibrated?
Get a quote for ADAS calibrationPIWIS3 static calibration required. OEM glass only - J1A camera specs differ from 95B. Verify all ADAS DTCs clear before delivery.
PIWIS3 radar alignment. J1A front bumper parts differ significantly from 95B. Inspect radar bracket. Front park sensor adaptation.
PIWIS3 LCA/BSD calibration. Rear camera calibration with targets if camera displaced.
Full PIWIS3 scan. ACU replace-only. HV system inspection mandatory - collision may damage 800V battery or cabling. All ADAS recalibrated. Factory auth for all module replacements.
CRITICAL: 800V HV isolation mandatory. HV-certified technician only. PIWIS3 HV-specific procedures. Minimum 10-minute wait after HV disconnect. BMS recalibration after replacement.
PIWIS3 + factory auth. J1A procedures differ from 95B - do not use 95B guided flows for J1A work.
Blind spot monitoring sensor replacement requires calibration using ODIS-S.
Surround view mirror camera recalibration required after mirror R&R. Use ODIS-S.
No matching records. Try a shorter part number or clear the filters. You can still request help if your module is not listed.
Not supported - porsche not in openpilot support tree
Not in openpilot support tree as of April 2026. Porsche not in openpilot support tree (except Macan pre-2019 which is in VW group values.py - newer Macan unsupported).
ADAS calibration pricing for a 2026 Porsche Macan depends on which of its 4 documented systems need work after a repair. This vehicle is documented with Porsche Active Safe (PAS) - Front Radar, Lane Change Assist (LCA) / BSD - Rear Corner Radar, Front Camera - Lane Keep Assist / AEB, and Surround View Camera System. We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.
Yes. The 2026 Porsche Macan uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: 95B129620. Mobile diagnosis and programming are available in DFW, and mail-in module service is available nationwide. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.
After windshield replacement on a 2026 Porsche Macan, Lane Change Assist (LCA) / BSD - Rear Corner Radar, Front Camera - Lane Keep Assist / AEB, and Surround View Camera System rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in module service is available nationwide for eligible module work.
Most 2026 Porsche Macan onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 11 programmable modules documented in our database (2 ECU, 1 BCM, 1 TCU, 1 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module service is available nationwide.
We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, post-repair recoding, and supported module work). Mail-in module service is available nationwide. Quote the work and we will confirm the active service path for the 2026 Porsche Macan. Do not ship a module unless support confirms next steps.
Every programming, cloning, and calibration job on the 2026 Porsche Macan is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
We program, clone, repair, or replace the full programmable-module stack on a 2026 Porsche Macan. For this vehicle our database documents:
Infotainment on this platform: Porsche PCM 6.0. Send the VIN and the operations performed and we will confirm support and pricing.
Additional OEM-sourced part numbers for the 2026 Porsche Macan covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.
Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.
Send your VIN and we'll confirm exact module support and pricing in the quote response.
1-year unlimited warranty on every flash and calibration.
Matching catalog references
These pages list a matching part reference in the same module category. This does not confirm interchangeability. Verify the complete part number, suffix, VIN and build before selecting a replacement.
Factory diagnostic software is available. We confirm the appropriate software and supported procedure for your vehicle.
Get onsite help in Dallas-Fort Worth. Ask about same-day availability or a one-time remote session for eligible work.