Immobilizer: NATS / I-Key
StandardKey programming requires manufacturer-level tool access. Add key supported. All keys lost (AKL) supported.
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
Same-Day Mobile Service
DFW Serving Dallas / Fort Worth
2013-2019 Nissan Sentra Generation Guide
Nissan Sentra 7th Gen B17 (2013-2019) ADAS Calibration & Module Programming
Covers model years 2013-2019 - one service guide for the whole generation.
Full ADAS calibration, module programming, and key security work for every Nissan Sentra built on this platform. Same-day mobile service across the Dallas/Fort Worth metroplex; mail-in accepted nationwide.
- Platform Sentra B17 generation; verify exact build by VIN
- CAN Architecture Nissan multi-CAN (AV-CAN / MS-CAN); OBD2 DLC ISO 15765-4 CAN 500kbps
- Security Nissan NVIS IMMO3 (NATS Gen3); no OBD pin extraction; AKL via CONSULT-III Plus + ASIST; max 4 I-Keys
The ADAS, module, and security rows below are consolidated across the full 2013-2019 generation. A year badge marks rows that apply only to part of the span; rows without a badge apply to every year. Year-specific differences are summarized under “What changes across 2013-2019”.
OVERVIEW
Expert ADAS calibration, module programming, and diagnostic recovery for the 2015 Nissan Sentra. On this vehicle we cover documented systems include Forward camera / lane camera - if equipped, Forward radar / distance sensor - if equipped, and Blind-spot, sonar, around-view, and parking-camera systems - if equipped, this Sentra B17 generation; verify exact build by VIN platform vehicle, NATS / I-Key immobilizer support. Mobile across the DFW Metroplex, mail-in nationwide for module-bench work.
Platform
Sentra B17 generation; verify exact build by VIN
Production
2007-present
Trim Levels
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Drivetrain
FWD
Engine
-
CAN Speed
Nissan multi-CAN (AV-CAN / MS-CAN); OBD2 DLC ISO 15765-4 CAN 500kbps
Feature availability 4
Platform: B17 (7th Gen, 2013-2019)
ConfirmedVerify platform code matches when cross-referencing part numbers across model years.
Platform: Sentra B17 generation; verify exact build by VIN
Verify by VINUse model-year and VIN-specific Nissan service information when cross-referencing parts.
NATS/NVIS / Intelligent Key equipment
Verify by VINUse CONSULT/ASIST security and option-configuration procedures for module or key replacement.
Tool access for this exact year
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
Factory scan, coding, and calibration access
Nissan CONSULT-III Plus
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
OEM subscription required
Make-level OEM tool map plus exact-year gateway and ADAS fields.
ADAS scan, setup, and verification
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Tool subscription required
Service-level scanner-vendor source packet plus exact-year ADAS records.
Bench cloning and chip-level recovery
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Bench programmer source packet plus exact-year module/security records.
Know this platform
This platform uses Nissan multi-CAN (AV-CAN / MS-CAN); OBD2 DLC ISO 15765-4 CAN 500kbps with ISO 15765-4 CAN (500 kbps).
- CAN
- Nissan multi-CAN (AV-CAN / MS-CAN); OBD2 DLC ISO 15765-4 CAN 500kbps
- OBD
- ISO 15765-4 CAN (500 kbps)
can_architecture
Generation service summary for Nissan Sentra 7th Gen B17 (2013-2019)
Generation coverage
This page consolidates Nissan Sentra service data for 2013-2019 across 7 model years; 7 years have merged CCT data.
Choose a yearADAS coverage
Merged ADAS coverage includes 6 system records, including Rear View Camera (2013-2014), Blind Spot Monitoring (2013-2014), Forward Collision Warning / AEB (2013-2014), and Forward camera / lane camera - if equipped (2015-2019). Year-marked systems apply only to the shown range.
View ADAS dataCalibration triggers
This generation has 6 merged calibration trigger records. Trigger applicability can vary by year - verify by VIN before setup.
View triggersProgrammable modules
The merged generation page indexes 28 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, IPC coverage. Part numbers are confirmed for the exact year/VIN.
View modulesGateway and security
Gateway, immobilizer, and key-security coverage includes 6 merged records. Security procedures vary by year - verify by VIN.
View securityCore Auto Logic capability
Core Auto Logic supports generation-level diagnostics, ADAS calibration, module programming, security-access planning, and mail-in bench work for the Nissan Sentra 2013-2019 span, with exact-year validation before service.
Get a quoteDo I need calibration?
ECM Replacement 1
2013-2014
Yes
CONSULT immobilizer work support + throttle position relearn.
ABS/VDC Module Replacement 1
2013-2014
Yes
CONSULT ABS bleed + VDC sensor reset.
Windshield or forward-camera replacement 2
Forward camera/lane camera
2015-2019Verify camera presence and run the Nissan alignment routine for the exact VIN after glass, camera, bracket, or related trim work.
AEB/LDW/ICC systems if equipped
2015-2019Verify camera presence and run the Nissan alignment routine for the exact VIN after glass, camera, bracket, or related trim work.
Front bumper, grille, or radar service 4
Forward radar
2015-2019Inspect bracket condition, confirm model-year sensor aim specification, and perform required radar/sonar initialization.
ICC/AEB
2015-2019Inspect bracket condition, confirm model-year sensor aim specification, and perform required radar/sonar initialization.
sonar
2015-2019Inspect bracket condition, confirm model-year sensor aim specification, and perform required radar/sonar initialization.
parking sensors if equipped
2015-2019Inspect bracket condition, confirm model-year sensor aim specification, and perform required radar/sonar initialization.
BCM/IPDM, key, or immobilizer module replacement 6
BCM
2015-2019Use security access and Nissan service procedures for VIN registration, option configuration, key registration, and DTC checks.
IPDM
2015-2019Use security access and Nissan service procedures for VIN registration, option configuration, key registration, and DTC checks.
NATS/NVIS
2015-2019Use security access and Nissan service procedures for VIN registration, option configuration, key registration, and DTC checks.
Intelligent Key
2015-2019Use security access and Nissan service procedures for VIN registration, option configuration, key registration, and DTC checks.
RKE
2015-2019Use security access and Nissan service procedures for VIN registration, option configuration, key registration, and DTC checks.
alarm
2015-2019Use security access and Nissan service procedures for VIN registration, option configuration, key registration, and DTC checks.
ABS/VDC, steering-angle, or suspension service 4
ABS/VDC
2015-2019Run required zero-point, bleed, alignment, calibration, and road test routines after module, chassis, or suspension work.
steering angle
2015-2019Run required zero-point, bleed, alignment, calibration, and road test routines after module, chassis, or suspension work.
yaw/lateral sensors
2015-2019Run required zero-point, bleed, alignment, calibration, and road test routines after module, chassis, or suspension work.
ADAS aim if equipped
2015-2019Run required zero-point, bleed, alignment, calibration, and road test routines after module, chassis, or suspension work.
Year-by-year details
| Year | VIN split | Trim notes |
|---|---|---|
| 2013 | VIN pos 4-8 identifies model/body/engine. Nissan WMI: 1N4, 5N1, JN1. Position 4-5 = model. Position 10 = model year code. | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. |
| 2014 | VIN pos 4-8 identifies model/body/engine. Nissan WMI: 1N4, 5N1, JN1. Position 4-5 = model. Position 10 = model year code. | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. |
| 2015 | VIN pos 4-8 identifies model/body/engine. Nissan WMI: 1N4, 5N1, JN1. Position 4-5 = model. Position 10 = model year code. | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. |
| 2016 | VIN pos 4-8 identifies model/body/engine. Nissan WMI: 1N4, 5N1, JN1. Position 4-5 = model. Position 10 = model year code. | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. |
| 2017 | VIN pos 4-8 identifies model/body/engine. Nissan WMI: 1N4, 5N1, JN1. Position 4-5 = model. Position 10 = model year code. | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. |
| 2018 | VIN pos 4-8 identifies model/body/engine. Nissan WMI: 1N4, 5N1, JN1. Position 4-5 = model. Position 10 = model year code. | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. |
| 2019 | VIN pos 4-8 identifies model/body/engine. Nissan WMI: 1N4, 5N1, JN1. Position 4-5 = model. Position 10 = model year code. | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. |
6 ADAS systems documented across 2013-2019. Rows that apply to only part of the generation carry a year badge.
Filter by year
ADAS CALIBRATION MATRIX
ADAS systems on this vehicle
Driver-assist equipment varies by year, trim, package, and build. Verify forward camera, radar, sonar, blind-spot, and parking-camera hardware by VIN before calibration. Do not apply newer-generation Nissan ProPILOT/Safety Shield package procedures unless the VIN confirms that equipment.
Scroll for part numbers and Details
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Rear View Camera 2013-2014 | Rear Camera | Camera | None | YES | - | |
| Blind Spot Monitoring 2013-2014 | Radar | ADAS | Static | Conditional | - | |
| Forward Collision Warning / AEB 2013-2014 | Camera | ADAS | Static | Conditional | - | |
| Forward camera / lane camera - if equipped 2015-2019 | Forward Camera | - | Static or dynamic per Nissan service information | YES | - | |
| Forward radar / distance sensor - if equipped 2015-2019 | Radar | - | Static or dynamic per Nissan service information | YES | - | |
| Blind-spot, sonar, around-view, and parking-camera systems - if equipped 2015-2019 | Parking / Blind Spot / Camera | - | Initialization and calibration per Nissan service information | YES | - |
ADAS SYSTEM
YES Supported
Identification
- System type
- Module category
- Sensor location
Part Numbers
- OEM
- Alternative
Calibration & Triggers
- Calibration type
- Programming approach
- Requires PMI
- Trigger events
Technical Notes
- Chip / MCU
- Service notes
Need this calibrated?
Get a quote for ADAS calibration WHEN IS CALIBRATION REQUIRED?
Triggers for ADAS recalibration
ECM Replacement 2013-2014
CONSULT immobilizer work support + throttle position relearn.
ABS/VDC Module Replacement 2013-2014
CONSULT ABS bleed + VDC sensor reset.
Windshield or forward-camera replacement 2015-2019 Affected: Forward camera/lane camera, AEB/LDW/ICC systems if equipped
Verify camera presence and run the Nissan alignment routine for the exact VIN after glass, camera, bracket, or related trim work.
Front bumper, grille, or radar service 2015-2019 Affected: Forward radar, ICC/AEB, sonar, parking sensors if equipped
Inspect bracket condition, confirm model-year sensor aim specification, and perform required radar/sonar initialization.
BCM/IPDM, key, or immobilizer module replacement 2015-2019 Affected: BCM, IPDM, NATS/NVIS, Intelligent Key, RKE, alarm
Use security access and Nissan service procedures for VIN registration, option configuration, key registration, and DTC checks.
ABS/VDC, steering-angle, or suspension service 2015-2019 Affected: ABS/VDC, steering angle, yaw/lateral sensors, ADAS aim if equipped
Run required zero-point, bleed, alignment, calibration, and road test routines after module, chassis, or suspension work.
Modules we program on this generation
28 documented Nissan Sentra modules across 2013-2019. Open a group for part numbers, programming protocol, security notes, and clone support.
SRS MODULES
SRS Modules
SRS Control Unit Verify by VIN 2013-2016 98510ZT78C
_years covers only 2013-2016 for this generation
Used/donor module guide
Compatible donor years: 2013, 2014, 2015, 2016
Always match the full part number before buying a used module.
- PART
- 98510ZT78C
- LOCATION
- Under center console
- MFG
- Continental
- NOTES
- Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
SRS Control Unit Verify by VIN 2013-2016 98820ZT90A
_years covers only 2013-2016 for this generation
Used/donor module guide
Compatible donor years: 2013, 2014, 2015, 2016
Always match the full part number before buying a used module.
- PART
- 98820ZT90A
- LOCATION
- Under center console
- MFG
- Continental
- NOTES
- Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
SRS Control Unit Verify by VIN 2017-2019 985P16LB8A
_years covers only 2017-2019 for this generation
Used/donor module guide
Compatible donor years: 2017, 2018, 2019
Always match the full part number before buying a used module.
- PART
- 985P16LB8A
- LOCATION
- Under center console
- MFG
- Continental
- NOTES
- Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
SRS Control Unit Verify by VIN 2017-2019 985P06LB8A
_years covers only 2017-2019 for this generation
Used/donor module guide
Compatible donor years: 2017, 2018, 2019
Always match the full part number before buying a used module.
- PART
- 985P06LB8A
- LOCATION
- Under center console
- MFG
- Continental
- NOTES
- Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
ECU MODULES
ECU Modules
ECM - 1.8L MR18DE I4 / 2.0L MR20DE I4 / 1.6L HR16DE I4 (2013+) Verify by VIN 2013-2014
_years covers only 2013-2014 for this generation
Used/donor module guide
Compatible donor years: 2013, 2014
Always match the full part number before buying a used module.
- NOTES
- Nissan Sentra ECM. CONSULT-III+ IMMO registration.
ECM / PCM - Nissan powertrain, VIN-specific Verify by VIN 2015-2019
_years covers only 2015-2019 for this generation
Used/donor module guide
Compatible donor years: 2015, 2016, 2017, 2018, 2019
Always match the full part number before buying a used module.
- PROTOCOL
- CONSULT/ASIST programming per service information
- CODING
- Yes
- CLONE
- Yes
- NOTES
- Verify engine, transmission, emissions calibration, and module suffix by VIN. Perform VIN registration, idle/throttle learns, and NATS/NVIS sync as required.
BCM MODULES
BCM Modules
BCM (Body Control Module) Verify by VIN 2013-2014
_years covers only 2013-2014 for this generation
Used/donor module guide
Compatible donor years: 2013, 2014
Always match the full part number before buying a used module.
- NOTES
- Nissan BCM. CONSULT-III+ work support for key registration + module ID.
TCU / TCM TRANSMISSION MODULES
TCU / TCM Transmission Modules
TCU - CVT8 RE0F11A Verify by VIN 2013-2016 31036-3JZ
_years covers only 2013-2016 for this generation
Used/donor module guide
Compatible donor years: 2013, 2014, 2015, 2016
Always match the full part number before buying a used module.
- PART
- 31036-3JZ
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- No
- CHIP/MCU
- Renesas SH7058
- NOTES
- Jatco CVT8 relearn required via Consult III+, use NS-3 CVT fluid, TCU/ECM marriage procedure mandatory, valve body relearn needed
TCU - CVT8 RE0F11A Verify by VIN 2017-2019 31036-3JZ
_years covers only 2017-2019 for this generation
Used/donor module guide
Compatible donor years: 2017, 2018, 2019
Always match the full part number before buying a used module.
- PART
- 31036-3JZ
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- No
- CHIP/MCU
- Renesas SH7059
- NOTES
- Jatco CVT8 relearn via Consult III+, NS-3 CVT fluid specification, TCU/ECM marriage required, belt ratio relearn mandatory
ABS / BRAKE MODULES
ABS / Brake Modules
ABS Actuator and Electric Unit (Control Unit) Verify by VIN 2013-2014
_years covers only 2013-2014 for this generation
Used/donor module guide
Compatible donor years: 2013, 2014
Always match the full part number before buying a used module.
- NOTES
- Nissan ABS/VDC. CONSULT-III+ self-diagnosis + air bleeding work support.
Wheel Speed Sensor - Front (each) Verify by VIN 2013-2014
_years covers only 2013-2014 for this generation
Used/donor module guide
Compatible donor years: 2013, 2014
Always match the full part number before buying a used module.
- NOTES
- Active sensor. DTC C1101/C1102 series.
Wheel Speed Sensor - Rear (each) Verify by VIN 2013-2014
_years covers only 2013-2014 for this generation
Used/donor module guide
Compatible donor years: 2013, 2014
Always match the full part number before buying a used module.
- NOTES
- Active sensor.
ABS/VDC/ESC Module - VIN-specific Verify by VIN 2015-2019
_years covers only 2015-2019 for this generation
Used/donor module guide
Compatible donor years: 2015, 2016, 2017, 2018, 2019
Always match the full part number before buying a used module.
- CLONE
- Yes
- NOTES
- Run CONSULT initialization, steering-angle/yaw zero-point, brake bleed, and road-test steps required by the exact build.
OTHER MODULES (IPC, SAS)
Other Modules (IPC, SAS)
Instrument Panel Cluster (IPC) x7
24810-3SG0A Verify by VIN 2013
_years covers only 2013 for this generation
Used/donor module guide
Compatible donor years: 2013
Donor must match part family 24810-3SG0A - requires cloning
Always match the full part number before buying a used module.
- PART
- 24810-3SG0A
- CLONE
- Yes
- NOTES
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
24810-3SG1A Verify by VIN 2014
_years covers only 2014 for this generation
Used/donor module guide
Compatible donor years: 2014
Donor must match part family 24810-3SG1A - requires cloning
Always match the full part number before buying a used module.
- PART
- 24810-3SG1A
- CLONE
- Yes
- NOTES
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
24810-3JZ0A Verify by VIN 2015
_years covers only 2015 for this generation
Used/donor module guide
Compatible donor years: 2015
Donor must match part family 24810-3JZ0A - requires cloning
Always match the full part number before buying a used module.
- PART
- 24810-3JZ0A
- CLONE
- Yes
- NOTES
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
24810-3JZ1A Verify by VIN 2016
_years covers only 2016 for this generation
Used/donor module guide
Compatible donor years: 2016
Donor must match part family 24810-3JZ1A - requires cloning
Always match the full part number before buying a used module.
- PART
- 24810-3JZ1A
- CLONE
- Yes
- NOTES
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
24810-3JZ2A Verify by VIN 2017
_years covers only 2017 for this generation
Used/donor module guide
Compatible donor years: 2017
Donor must match part family 24810-3JZ2A - requires cloning
Always match the full part number before buying a used module.
- PART
- 24810-3JZ2A
- CLONE
- Yes
- NOTES
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
24810-3JZ3A Verify by VIN 2018
_years covers only 2018 for this generation
Used/donor module guide
Compatible donor years: 2018
Donor must match part family 24810-3JZ3A - requires cloning
Always match the full part number before buying a used module.
- PART
- 24810-3JZ3A
- CLONE
- Yes
- NOTES
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
24810-3JZ4A Verify by VIN 2019
_years covers only 2019 for this generation
Used/donor module guide
Compatible donor years: 2019
Donor must match part family 24810-3JZ4A - requires cloning
Always match the full part number before buying a used module.
- PART
- 24810-3JZ4A
- CLONE
- Yes
- NOTES
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Steering Angle Sensor (SAS) x2
Part 1 Verify by VIN
coding and programming fields are absent or ambiguous
Used/donor module guide
Compatible donor years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Always match the full part number before buying a used module.
- CODING
- Yes
- NOTES
- INTEGRATED (clock spring / steering column module
Part 2 Verify by VIN
coding and programming fields are absent or ambiguous
Used/donor module guide
Compatible donor years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Always match the full part number before buying a used module.
- CODING
- Yes
- NOTES
- cross-year extension)
CONNECTIVITY & ACCESSORIES
Connectivity & Accessories
NissanConnect 8" Display Audio Verify by VIN 2013-2014 ASIST - B18)
_years covers only 2013-2014 for this generation
Used/donor module guide
Compatible donor years: 2013, 2014
Always match the full part number before buying a used module.
- PART
- ASIST - B18)
- NOTES
- Apple CarPlay and Android Auto standard on B18. CONSULT connectivity system check after replacement. USB software update via Nissan AV update process. Verify CarPlay/AA post-swap. No dealer coding required for base unit swap - confirm DTC clear via CONSULT.
7" Display Audio (S trim base) Verify by VIN 2013-2014 ASIST - B18 S TRIM)
_years covers only 2013-2014 for this generation
Used/donor module guide
Compatible donor years: 2013, 2014
Always match the full part number before buying a used module.
- PART
- ASIST - B18 S TRIM)
- NOTES
- Base S trim variant. Same replacement procedure as 8" unit. Confirm trim level before ordering replacement unit.
RKE, Intelligent Key, sonar, camera, and convenience options - if equipped Verify by VIN 2015-2019
_years covers only 2015-2019 for this generation
Used/donor module guide
Compatible donor years: 2015, 2016, 2017, 2018, 2019
Always match the full part number before buying a used module.
- NOTES
- Convenience equipment is package-dependent. Use Nissan service information for module replacement, option configuration, DTC checks, and subscription-dependent feature verification.
6 gateway, immobilizer, and security items documented across 2013-2019.
GATEWAY / SECURITY MODULES
Gateway / Security Modules
Central Gateway Module Dealer security required
vin_locked indicates immobilizer or VIN security
Used/donor module guide
Compatible donor years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Always match the full part number before buying a used module.
- MFG
- NXP / Freescale
- SECURITY
- VIN-locked (UDS)
- VIN LOCKED
- Yes
- CODING
- Yes
- CHIP/MCU
- MPC5606BK
- NOTES
- Compatibility label: X-TRAIL. BCM | Notes: Read/Write
KEY SECURITY & IMMOBILIZER
Key Security & Immobilizer
- System NATS / I-Key
- Add Key Yes
- All Keys Lost Yes
Nissan NVIS IMMO3 (NATS Gen3); no OBD pin extraction; AKL via CONSULT-III Plus + ASIST; max 4 I-Keys
IMMOBILIZER MODULES
Immobilizer Modules
NATS (Nissan Anti-Theft System) - IPDM/BCM Verify by VIN 2013-2014
_years covers only 2013-2014 for this generation
Used/donor module guide
Compatible donor years: 2013, 2014
Always match the full part number before buying a used module.
- NOTES
- Nissan NATS5/NATS6. CONSULT-III+ IMMO registration. AKL: CONSULT PIN extraction possible pre-2015.
NATS / NVIS / Intelligent Key system - VIN-specific Verify by VIN 2015-2019
_years covers only 2015-2019 for this generation
Used/donor module guide
Compatible donor years: 2015, 2016, 2017, 2018, 2019
Always match the full part number before buying a used module.
- SECURITY
- NATS/NVIS generation varies by build
- NOTES
- Use Nissan security access through CONSULT/ASIST for AKL, key registration, BCM/IPDM, ECM, and immobilizer-related replacement. Confirm key count and module suffix by VIN.
KEY & FOB TYPES
Key & Fob Types
Nissan Transponder Key (ID46 / NATS chip) Verify by VIN 2013-2014
_years covers only 2013-2014 for this generation
Used/donor module guide
Compatible donor years: 2013, 2014
Always match the full part number before buying a used module.
- NOTES
- ID46 Philips. CONSULT-III+ registration or aftermarket (Autel). Max 4 keys (NATS5).
Nissan Intelligent Key (Proximity) Verify by VIN 2013-2014
_years covers only 2013-2014 for this generation
Used/donor module guide
Compatible donor years: 2013, 2014
Always match the full part number before buying a used module.
- NOTES
- Push-to-start. CONSULT registration. Max 4 keys.
Nissan remote, transponder, or Intelligent Key - VIN-specific Verify by VIN 2015-2019
_years covers only 2015-2019 for this generation
Used/donor module guide
Compatible donor years: 2015, 2016, 2017, 2018, 2019
Always match the full part number before buying a used module.
- NOTES
- Add-key and all-keys-lost procedures vary by NATS/NVIS generation. Confirm immobilizer generation, key count, and security access requirements before service.
Replacement Notes
NATS / I-Key system. CONSULT-III Plus required for key programming and module replacement. No obd pin extraction; akl supported.
ARCHITECTURE & CONNECTIVITY
Architecture & Connectivity
- Body Construction
- B17 unibody sedan construction; verify exact trim and build by VIN
- OBD Protocol
- ISO 15765-4 CAN (500 kbps)
- CAN Architecture
- Nissan multi-CAN (AV-CAN / MS-CAN); OBD2 DLC ISO 15765-4 CAN 500kbps
- Infotainment
- 8" NissanConnect; Apple CarPlay + Android Auto standard; wireless CarPlay on equipped trims
- OTA Capable
- No
- ECU Unlock Supported
- Yes
- Custom Programming
- Yes
WHAT WE RESOLVE
7th Gen B17 (2013-2019) common module and ADAS issues
- ADAS calibration drift Watch for calibration needs after windshield, bumper, suspension, camera, or radar work. Documented systems include Rear View Camera (2013-2014), Blind Spot Monitoring (2013-2014), Forward Collision Warning / AEB (2013-2014), and Forward camera / lane camera - if equipped (2015-2019). Year-marked systems apply only to the shown range.
- SRS crash-data and warning light SRS service can involve SRS Control Unit (2013-2016) and SRS Control Unit (2017-2019). Part numbers and crash-data workflow are confirmed for the exact year/VIN.
- Replacement module setup ECU/PCM replacement programming, BCM configuration, TCU/TCM cloning, ABS/EBCM setup are represented in the merged generation data. Rows with year ranges do not apply to every model year; verify by VIN.
- Gateway, key, and immobilizer access Gateway, key, and immobilizer procedures are represented by 6 merged security records. Access and all-keys-lost support varies by year - verify by VIN.
FREQUENTLY ASKED QUESTIONS
FAQ
Can you program Nissan Sentra (2013-2019) modules?
Yes. Core Auto Logic supports generation-scoped module programming for the Nissan Sentra (2013-2019). The merged generation data includes ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS coverage. Rows marked with a year range apply only to that part of the span; unmarked rows are present across the merged generation data.
Which modules are documented for Nissan Sentra (2013-2019)?
The Nissan Sentra (2013-2019) generation currently shows 14 core module records across ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS groups. SRS examples include SRS Control Unit (2013-2016) and SRS Control Unit (2017-2019). Part numbers and module variants must be confirmed for your exact year/VIN. Reference part number: 98510ZT78C (2013-2016) - confirm for your exact year/VIN.
Does Nissan Sentra (2013-2019) need ADAS calibration after glass or collision work?
The merged generation data documents 6 ADAS systems, including Rear View Camera (2013-2014), Blind Spot Monitoring (2013-2014), Forward Collision Warning / AEB (2013-2014), Forward camera / lane camera - if equipped (2015-2019), and Forward radar / distance sensor - if equipped (2015-2019). Calibration triggers include ECM Replacement (2013-2014), ABS/VDC Module Replacement (2013-2014), Windshield or forward-camera replacement (2015-2019), and Front bumper, grille, or radar service (2015-2019). Procedure type is VIN-specific scan-tool procedure; verify exact requirements by VIN before setup.
Can you reset the airbag module on Nissan Sentra (2013-2019)?
Yes. The generation data includes 4 SRS records, including SRS Control Unit (2013-2016) and SRS Control Unit (2017-2019). Bench reset, cloning, and replacement setup are handled after part-number review. Any SRS part number shown for this generation is planning data only - confirm for your exact year/VIN. Reference part number: 98510ZT78C (2013-2016) - confirm for your exact year/VIN.
Do all Nissan Sentra (2013-2019) years use the same parts?
No assumption should be made across the full span. The generation page merges rows across 2013-2019; any row that does not span all data-bearing years is printed with its year range or treated as varies by year - verify by VIN. Part numbers always require exact year/VIN confirmation before ordering, cloning, or programming.
Can you program keys or immobilizer systems for Nissan Sentra (2013-2019)?
Yes, where the VIN and security workflow support it. The generation data includes 6 gateway, immobilizer, or key-security records. Gateway examples include Central Gateway Module. Key records are present in the merged generation data. Security access, all-keys-lost eligibility, and add-key workflows vary by year - verify by VIN.
How long does service take for Nissan Sentra (2013-2019)?
Most programming, cloning, SRS, and calibration jobs are quoted after VIN, DTC, part number, and repair-scope review. Labor time varies by year - verify by VIN before scheduling. Mail-in module work typically depends on module condition, donor data, and shipping window.
Is Nissan Sentra (2013-2019) service mobile or mail-in?
Both paths are available depending on the job. Mobile service covers DFW on-vehicle diagnostics, ADAS setup, key programming, and post-repair coding. Mail-in service covers ECU, BCM, SRS, TCU, ABS, and other bench module work nationwide. We confirm the correct path for your exact year/VIN before scheduling.