Use vehicle lookup when you know the year, make, and model. Use quote when the car is in front of you and the symptom matters more than the catalog page.
Covers model years 2007-2012 - one service guide for the whole generation.
Full ADAS calibration, module programming, and key security work for every Nissan Sentra built on this platform. Same-day mobile service across the Dallas/Fort Worth metroplex; mail-in accepted nationwide.
PlatformB16 (6th Gen, 2007-2012)
CAN ArchitectureHS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
SecurityNissan NATS5 (ID46 Philips transponder); traditional key or Intelligent Key (FOBIK); PIN extraction via CONSULT-III+ possible; AKL requires CONSULT + PIN code + NATS ECM registration
The ADAS, module, and security rows below are consolidated across the full 2007-2012 generation. A year badge marks rows that apply only to part of the span; rows without a badge apply to every year. Year-specific differences are summarized under “What changes across 2007-2012”.
OVERVIEW
Expert ADAS calibration, module programming, and diagnostic recovery for the 2007 Nissan Sentra. On this vehicle we cover documented systems include No Factory ADAS Systems, this B16 (6th Gen, 2007-2012) platform vehicle, NATS / I-Key immobilizer support. Mobile across the DFW Metroplex, mail-in nationwide for module-bench work.
Merged ADAS coverage includes 3 system records, including No Factory ADAS Systems (2007), Rear View Camera (2008-2009, 2012), and Rear View Camera (2010-2011). Year-marked systems apply only to the shown range.
The merged generation page indexes 34 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, IPC coverage. Part numbers are confirmed for the exact year/VIN.
Core Auto Logic supports generation-level diagnostics, ADAS calibration, module programming, security-access planning, and mail-in bench work for the Nissan Sentra 2007-2012 span, with exact-year validation before service.
CONSULT immobilizer work support + throttle position relearn.
ABS/VDC Module Replacement
CONSULT ABS bleed + VDC sensor reset.
MODULE COVERAGE
Modules we program on this generation
34 documented Nissan Sentra modules across 2007-2012. Open a group for part numbers, programming protocol, security notes, and clone support.
SRS MODULES
SRS Modules
Airbag Control Module (ACM)x2
Part 1Verify by VIN2007Bench
_years covers only 2007 for this generation
Used/donor module guide
Compatible donor years: 2007
Always match the full part number before buying a used module.
PROTOCOL
Bench
CLONE
true
NOTES
After any airbag deployment, the ACM stores crash data (hard codes). The module must be reset or replaced before the SRS system will function. Our equipment supports hard code clearing on most makes and models without dealer involvement.
Part 2Verify by VIN2008OBD
_years covers only 2008 for this generation
Used/donor module guide
Compatible donor years: 2008
Always match the full part number before buying a used module.
PROTOCOL
OBD
CLONE
true
NOTES
After any airbag deployment, the ACM stores crash data (hard codes). The module must be reset or replaced before the SRS system will function. Our equipment supports hard code clearing on most makes and models without dealer involvement.
Driver Airbag ModuleVerify by VIN2007-2008x1
_years covers only 2007-2008 for this generation
Used/donor module guide
Compatible donor years: 2007, 2008
Always match the full part number before buying a used module.
PROTOCOL
None
CLONE
false
NOTES
Steering wheel airbag must be replaced after deployment. Clock spring (spiral cable) must also be inspected and replaced if damaged. Confirm correct resistance before reconnecting.
Passenger Airbag ModuleVerify by VIN2007-2008x1
_years covers only 2007-2008 for this generation
Used/donor module guide
Compatible donor years: 2007, 2008
Always match the full part number before buying a used module.
PROTOCOL
None
CLONE
false
NOTES
Dashboard passenger airbag must be replaced after deployment. Dashboard assembly typically requires removal for access. Confirm OEM part number matches vehicle build date.
SRS Control Unitx3
98820ZT90AVerify by VIN2009-2012Under center console
_years covers only 2009-2012 for this generation
Used/donor module guide
Compatible donor years: 2009, 2010, 2011, 2012
Always match the full part number before buying a used module.
PART
98820ZT90A
LOCATION
Under center console
MFG
Continental
NOTES
Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
98510ZT78CVerify by VIN2009, 2011-2012Under center console
_years covers only 2009, 2011-2012 for this generation
Used/donor module guide
Compatible donor years: 2009, 2011, 2012
Always match the full part number before buying a used module.
PART
98510ZT78C
LOCATION
Under center console
MFG
Continental
NOTES
Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
98510-ZT78CVerify by VIN2010Under center console
_years covers only 2010 for this generation
Used/donor module guide
Compatible donor years: 2010
Always match the full part number before buying a used module.
PART
98510-ZT78C
LOCATION
Under center console
MFG
Continental
NOTES
Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
ECU MODULES
ECU Modules
Engine Control Module (ECM) - 2.0L MR20DE I4x3
23710-ET001Verify by VIN2007J2534
_years covers only 2007 for this generation
Used/donor module guide
Compatible donor years: 2007
Always match the full part number before buying a used module.
PART
23710-ET001
PROTOCOL
J2534
CODING
Yes
CLONE
No
NOTES
2007 Sentra 2.0L MR20DE I4; confirmed at nissanpartsdeal.com 2007 page and fs1inc.com. Also carries to 2008 and select later years. Additional 2007 MR20DE variants: ET000, ET002, ET003, ET004, ET005, ET006, ET007. | Sources: https://www.nissanpartsdeal.com/oem-2007-nissan-sentra-engine_control_module.html
23710-ET001Verify by VIN2008J2534
_years covers only 2008 for this generation
Used/donor module guide
Compatible donor years: 2008
Always match the full part number before buying a used module.
Always match the full part number before buying a used module.
PART
23710-ET83A
PROTOCOL
J2534
CODING
Yes
CLONE
No
NOTES
2007-2008 Sentra SE-R/Spec V 2.5L QR25DE; listed for both 2007 and 2008 at nissanpartsdeal.com. Spec V vs SE-R variant distinction carried into 2008 as ZJ68A/ZJ69A. | Sources: https://www.nissanpartsdeal.com/oem-2007-nissan-sentra-engine_control_module.html | Confidence: medium
23710-ZJ68AVerify by VIN2008J2534
_years covers only 2008 for this generation
Used/donor module guide
Compatible donor years: 2008
Always match the full part number before buying a used module.
PART
23710-ZJ68A
PROTOCOL
J2534
CODING
Yes
CLONE
No
NOTES
2008-2009 Sentra SE-R Spec V 2.5L QR25DE; listed at nissanpartsdeal.com 2008 page with Spec V designation. | Sources: https://www.nissanpartsdeal.com/oem-2008-nissan-sentra-engine_control_module.html
23710-ZJ68AVerify by VIN2009J2534
_years covers only 2009 for this generation
Used/donor module guide
Compatible donor years: 2009
Always match the full part number before buying a used module.
PART
23710-ZJ68A
PROTOCOL
J2534
CODING
Yes
CLONE
No
NOTES
2008-2009 Sentra SE-R Spec V 2.5L QR25DE; confirmed at nissanpartsdeal.com 2009 page. Additional 2009 Spec V variant: ZT60A. | Sources: https://www.nissanpartsdeal.com/oem-2009-nissan-sentra-engine_control_module.html
Engine Control Module (ECM) - 2.0L MR20DE I4 (ZJ series)Verify by VIN2008x1
_years covers only 2008 for this generation
Used/donor module guide
Compatible donor years: 2008
Always match the full part number before buying a used module.
Always match the full part number before buying a used module.
NOTES
Active sensor.
OTHER MODULES (IPC, SAS)
Other Modules (IPC, SAS)
Instrument Panel Cluster (IPC)Verify by VIN201024810-ZE00A
_years covers only 2010 for this generation
Used/donor module guide
Compatible donor years: 2010
Donor must match part family 24810-ZE00A - requires cloning
Always match the full part number before buying a used module.
PART
24810-ZE00A
CLONE
Yes
NOTES
IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Instrument Panel Cluster (IPC)Verify by VIN201124810-ZE10A
_years covers only 2011 for this generation
Used/donor module guide
Compatible donor years: 2011
Donor must match part family 24810-ZE10A - requires cloning
Always match the full part number before buying a used module.
PART
24810-ZE10A
CLONE
Yes
NOTES
IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Instrument Panel Cluster (IPC)Verify by VIN201224810-ZE20A
_years covers only 2012 for this generation
Used/donor module guide
Compatible donor years: 2012
Donor must match part family 24810-ZE20A - requires cloning
Always match the full part number before buying a used module.
PART
24810-ZE20A
CLONE
Yes
NOTES
IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Steering Angle Sensor (SAS)Verify by VIN
coding and programming fields are absent or ambiguous
Always match the full part number before buying a used module.
PART
ASIST - B18)
NOTES
Apple CarPlay and Android Auto standard on B18. CONSULT connectivity system check after replacement. USB software update via Nissan AV update process. Verify CarPlay/AA post-swap. No dealer coding required for base unit swap - confirm DTC clear via CONSULT.
7" Display Audio (S trim base)Verify by VINASIST - B18 S TRIM)
coding and programming fields are absent or ambiguous
Nissan AM/FM stereo; CD player; Bluetooth (select trims); Aux input
OTA Capable
No
ECU Unlock Supported
No
Custom Programming
Yes
WHAT WE RESOLVE
6th Gen B16 (2007-2012) common module and ADAS issues
ADAS calibration driftWatch for calibration needs after windshield, bumper, suspension, camera, or radar work. Documented systems include No Factory ADAS Systems (2007), Rear View Camera (2008-2009, 2012), and Rear View Camera (2010-2011). Year-marked systems apply only to the shown range.
SRS crash-data and warning lightSRS service can involve Airbag Control Module (ACM) (2007), Driver Airbag Module (2007-2008), and Passenger Airbag Module (2007-2008). Part numbers and crash-data workflow are confirmed for the exact year/VIN.
Replacement module setupECU/PCM replacement programming, BCM configuration, TCU/TCM cloning, ABS/EBCM setup are represented in the merged generation data. Rows with year ranges do not apply to every model year; verify by VIN.
Gateway, key, and immobilizer accessGateway, key, and immobilizer procedures are represented by 4 merged security records. Access and all-keys-lost support varies by year - verify by VIN.
Shared module fitment
Vehicles sharing these modules
These vehicles use one or more indexed replacement modules from this generation.
Can you program Nissan Sentra (2007-2012) modules?
Yes. Core Auto Logic supports generation-scoped module programming for the Nissan Sentra (2007-2012). The merged generation data includes ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS coverage. Rows marked with a year range apply only to that part of the span; unmarked rows are present across the merged generation data.
Which modules are documented for Nissan Sentra (2007-2012)?
The Nissan Sentra (2007-2012) generation currently shows 26 core module records across ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS groups. SRS examples include Airbag Control Module (ACM) (2007), Driver Airbag Module (2007-2008), and Passenger Airbag Module (2007-2008). Part numbers and module variants must be confirmed for your exact year/VIN. Reference part number: 98820ZT90A (2009-2012) - confirm for your exact year/VIN.
Does Nissan Sentra (2007-2012) need ADAS calibration after glass or collision work?
The merged generation data documents 3 ADAS systems, including No Factory ADAS Systems (2007), Rear View Camera (2008-2009, 2012), and Rear View Camera (2010-2011). Calibration triggers include ECM Replacement and ABS/VDC Module Replacement. Procedure type is VIN-specific scan-tool procedure; verify exact requirements by VIN before setup.
Can you reset the airbag module on Nissan Sentra (2007-2012)?
Yes. The generation data includes 7 SRS records, including Airbag Control Module (ACM) (2007), Driver Airbag Module (2007-2008), and Passenger Airbag Module (2007-2008). Bench reset, cloning, and replacement setup are handled after part-number review. Any SRS part number shown for this generation is planning data only - confirm for your exact year/VIN. Reference part number: 98820ZT90A (2009-2012) - confirm for your exact year/VIN.
Do all Nissan Sentra (2007-2012) years use the same parts?
No assumption should be made across the full span. The generation page merges rows across 2007-2012; any row that does not span all data-bearing years is printed with its year range or treated as varies by year - verify by VIN. Part numbers always require exact year/VIN confirmation before ordering, cloning, or programming.
Can you program keys or immobilizer systems for Nissan Sentra (2007-2012)?
Yes, where the VIN and security workflow support it. The generation data includes 4 gateway, immobilizer, or key-security records. Gateway examples include Central Gateway Module. Key records are present in the merged generation data. Security access, all-keys-lost eligibility, and add-key workflows vary by year - verify by VIN.
How long does service take for Nissan Sentra (2007-2012)?
Most programming, cloning, SRS, and calibration jobs are quoted after VIN, DTC, part number, and repair-scope review. Labor time varies by year - verify by VIN before scheduling. Mail-in module work typically depends on module condition, donor data, and shipping window.
Is Nissan Sentra (2007-2012) service mobile or mail-in?
Both paths are available depending on the job. Mobile service covers DFW on-vehicle diagnostics, ADAS setup, key programming, and post-repair coding. Mail-in service covers ECU, BCM, SRS, TCU, ABS, and other bench module work nationwide. We confirm the correct path for your exact year/VIN before scheduling.
The Core Auto Logic logo features a stylized circular design combining a mechanical gear with a globe made of interconnected green circuit lines. The circuit pattern represents advanced automotive electronics, diagnostics, and networked vehicle systems. The word "CORE" appears prominently within the circular design, with "AUTO LOGIC" displayed to the right in bold lettering. The overall design reflects expertise in ADAS calibration, ECU programming, and modern vehicle technology services.A compact version of the Core Auto Logic logo featuring a circular gear shape combined with a globe made of interconnected circuit lines, representing automotive electronics and advanced vehicle technology.A compact version of the Core Auto Logic logo featuring a circular gear shape combined with a globe made of interconnected circuit lines, representing automotive electronics and advanced vehicle technology.The CORE Auto Logic logo features a stylized gear partially encircling a globe made of green interconnected circuit lines, representing automotive technology and electronic systems. The word "CORE" appears prominently in bold lettering, followed by "AUTO LOGIC" to the right, conveying a focus on advanced vehicle diagnostics, ADAS calibration, and module programming services.The Core Auto Logic logo features a stylized circular design combining a mechanical gear with a globe made of interconnected green circuit lines. The circuit pattern represents advanced automotive electronics, diagnostics, and networked vehicle systems. The word "CORE" appears prominently within the circular design, with "AUTO LOGIC" displayed to the right in bold lettering. The overall design reflects expertise in ADAS calibration, ECU programming, and modern vehicle technology services.