Electronic systems coverage
This 2008 Nissan Sentra page does not list sensor-system records yet; module, security, and programming support is confirmed by VIN before service.
View systems 3,200+ Vehicles Supported
1-Year Unlimited Guarantee
DFW Mobile Service
DFW Serving Dallas / Fort Worth
No ADAS systems detected on this vehicle. Want to switch to Onsite Diagnostics? Most non-ADAS issues are diagnosed and resolved in a single visit.
2008 Nissan Sentra Supported Services
2008 Nissan Sentra
ADAS calibration, module programming, and security relearns
Full ADAS calibration, module programming, and key security work for the 2008 Nissan Sentra. Mail-in module service is available nationwide. Exact service eligibility is confirmed from the year, VIN, module, and requested scope.
Technical snapshot
- Platform B16 (6th Gen, 2007-2012)
- CAN Architecture HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
- Security Nissan NATS5 (ID46 Philips transponder); traditional key or Intelligent Key (FOBIK); PIN extraction via CONSULT-III+ possible; AKL requires CONSULT + PIN code + NATS ECM registration
What do you need fixed?
Choose a service to start your quote.
OVERVIEW
Expert ADAS calibration, module programming, and diagnostic recovery for the 2008 Nissan Sentra. On this vehicle we cover documented systems include Rear View Camera, this B16 (6th Gen, 2007-2012) platform vehicle, NATS / I-Key immobilizer support. Mobile across the DFW Metroplex; mail-in module service is available nationwide.
Platform
B16 (6th Gen, 2007-2012)
Production
2007-present
Trim Levels
-
Drivetrain
FWD
Engine
-
CAN Speed
HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
Exact-year service summary for 2008 Nissan Sentra
Programmable modules
This page indexes 16 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and SAS coverage.
View modulesGateway and security
This page includes 4 gateway, immobilizer, or key-security records for this 2008 Nissan Sentra.
View securityCore Auto Logic capability
Core Auto Logic supports exact-year diagnostics, module programming, and security-access planning for the 2008 Nissan Sentra using the documented module data on this page.
Choose a sectionWhat changes on this exact year
Feature availability
Basic: Rear view camera only (2011-2018) - Available; Platform: B16 (6th Gen, 2007-2012) - Confirmed
Driver-assist suite
Basic: Rear view camera only (2011-2018)
Infotainment context
Nissan AM/FM stereo; CD player; Bluetooth (select trims); Aux input
Network and access
CAN: HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
Tool access for this exact year
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
Factory scan, coding, and calibration access
Nissan CONSULT-III Plus
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
ADAS scan, setup, and verification
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Bench cloning and chip-level recovery
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Choose a section to view data
SUPPORTED SYSTEMS
What we service on this vehicle
Documented module coverage for the 2008 Nissan Sentra. Counts reflect modules our techs have programmed or calibrated on this exact platform.
Engine / ECU Programming
4 modules documented
Powertrain reprogramming, calibration updates, replacement ECU configuration and security access.
Open Modules tabBCM / Body Programming
1 module documented
Body control module, gateway and accessory programming. Includes feature-bit reconfiguration.
Open Modules tabGateway / Security Access
1 module documented
Secure gateway module identification, bypass workflow and security-access planning before programming.
Open Security tabTCU / Transmission
1 module documented
Transmission control module reprogramming, adaptive learning reset and replacement TCM clone.
Open Modules tabSRS / Airbag Reset
3 modules documented
Crash-data clear, hard-code reset and replacement airbag module configuration.
Open Modules tabABS / Brake Module
3 modules documented
ABS / EBCM bleed support, replacement module coding and yaw-rate sensor calibration.
Open Modules tabIPC, SAS & Other Modules
2 modules documented
Instrument cluster cloning, steering angle sensor calibration and other supporting modules.
Open Modules tabConnectivity & Accessories
2 modules documented
Infotainment radio, surround view, remote start, trailer brake controller and other equipped systems.
Open Modules tabNeed something not listed? Most undocumented modules can still be programmed.
Feature availability 2
Basic: Rear view camera only (2011-2018)
AvailableCalibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.
Platform: B16 (6th Gen, 2007-2012)
ConfirmedVerify platform code matches when cross-referencing part numbers across model years.
WHAT WE RESOLVE
Common issues on this vehicle
Common Nissan Sentra issues we resolve on this platform: Rear View Camera recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - B16 (6th Gen, 2007-2012) platform uses HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14.
ADAS CALIBRATION MATRIX
ADAS systems on this vehicle
Basic: Rear view camera only (2011-2018)
Scroll for part numbers and Details
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Rear View Camera | Rear Camera | Camera | None | Conditional | - |
ADAS SYSTEM
YES Supported
Identification
- System type
- Module category
- Sensor location
Part Numbers
- OEM
- Alternative
Calibration & Triggers
- Calibration type
- Programming approach
- Requires PMI
- Trigger events
Technical Notes
- Chip / MCU
- Service notes
Need this calibrated?
WHEN IS CALIBRATION REQUIRED?
Triggers for ADAS recalibration
ECM Replacement
CONSULT immobilizer work support + throttle position relearn.
ABS/VDC Module Replacement
CONSULT ABS bleed + VDC sensor reset.
SRS Modules
Airbag Control Module (ACM)
- Protocol / method
- OBD
- Cloning supported
- Yes
- Notes
- After any airbag deployment, the ACM stores crash data (hard codes). The module must be reset or replaced before the SRS system will function. Our equipment supports hard code clearing on most makes and models without dealer involvement.
Driver Airbag Module
- Protocol / method
- None
- Cloning supported
- No
- Notes
- Steering wheel airbag must be replaced after deployment. Clock spring (spiral cable) must also be inspected and replaced if damaged.
Passenger Airbag Module
- Protocol / method
- None
- Cloning supported
- No
- Notes
- Dashboard passenger airbag must be replaced after deployment. Dashboard assembly typically requires removal for access.
ECU Modules
Engine Control Module (ECM) - 2.0L MR20DE I4 23710-ET001
- Part number
- 23710-ET001
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
- Notes
- Additional 2008 MR20DE ET/ZE variants: ET000, ET005, ET007, ZE81A, ZE83A, ZE84A, ZE85A, ZE86A, ZE87A.
Engine Control Module (ECM) - 2.0L MR20DE I4 (ZJ series) 23710-ZJ61A
- Part number
- 23710-ZJ61A
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
- Notes
- 2008-2009 Sentra 2.0L MR20DE; ZJ-series introduced for 2008. Additional 2008 ZJ variants: ZJ62A, ZJ63A, ZJ64A, ZJ72A, ZJ73A, ZJ74A.
Engine Control Module (ECM) - 2.5L QR25DE I4 SE-R Spec V 23710-ZJ68A
- Part number
- 23710-ZJ68A
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
Engine Control Module (ECM) - 2.5L QR25DE I4 SE-R 23710-ZJ69A
- Part number
- 23710-ZJ69A
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
BCM Modules
BCM (Body Control Module)
- Notes
- Nissan BCM. CONSULT-III+ work support for key registration + module ID.
TCU / TCM Transmission Modules
TCU - CVT RE0F10A 31036-ET00X
- Part number
- 31036-ET00X
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Renesas SH7058
- Notes
- CVT relearn required via Consult III, use NS-2 CVT fluid, TCU marriage to ECM required
ABS / Brake Modules
ABS Actuator and Electric Unit (Control Unit)
- Notes
- Nissan ABS/VDC. CONSULT-III+ self-diagnosis + air bleeding work support.
Wheel Speed Sensor - Front (each)
- Notes
- Active sensor. DTC C1101/C1102 series.
Other Modules (IPC, SAS)
Steering Angle Sensor (SAS)
- Coding required
- Yes
- Notes
- INTEGRATED (clock spring / steering column module
Steering Angle Sensor (SAS)
- Coding required
- Yes
- Notes
- cross-year extension)
Connectivity & Accessories
NissanConnect 8" Display Audio ASIST - B18)
- Part number
- ASIST - B18)
- Notes
- Apple CarPlay and Android Auto standard on B18. CONSULT connectivity system check after replacement. USB software update via Nissan AV update process. Verify CarPlay/AA post-swap.
7" Display Audio (S trim base) ASIST - B18 S TRIM)
- Part number
- ASIST - B18 S TRIM)
- Notes
- Base S trim variant. Same replacement procedure as 8" unit.
Gateway / Security Modules
Central Gateway Module
- Manufacturer
- NXP / Freescale
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- MPC5606BK
- Notes
- Compatibility label: X-TRAIL. BCM Notes: Read/Write
ARCHITECTURE & CONNECTIVITY
Architecture & Connectivity
- Body Construction
- B18 Unibody - AHSS, FWD
- OBD Protocol
- ISO 15765-4 CAN (500 kbps)
- CAN Architecture
- HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
- Infotainment
- Nissan AM/FM stereo; CD player; Bluetooth (select trims); Aux input
- OTA Capable
- No
- ECU/TCM Unlocking
- Contact us
- ECU/TCM Flashing
- Contact us
FREQUENTLY ASKED QUESTIONS
FAQ
How much does ADAS calibration cost for a 2008 Nissan Sentra?
ADAS calibration pricing for a 2008 Nissan Sentra depends on which of its 1 documented systems need work after a repair. This vehicle is documented with Rear View Camera. We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.
Can you reset the airbag light on a 2008 Nissan Sentra?
Yes. The 2008 Nissan Sentra uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Mobile diagnosis and programming are available in DFW, and mail-in module service is available nationwide. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.
What is needed after replacing the windshield on a 2008 Nissan Sentra?
After windshield replacement on a 2008 Nissan Sentra, Rear View Camera rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in module service is available nationwide for eligible module work.
How long does a 2008 Nissan Sentra module service take?
Most 2008 Nissan Sentra onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 15 programmable modules documented in our database (4 ECU, 1 BCM, 1 TCU, 3 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module service is available nationwide.
Do you cover the 2008 Nissan Sentra on-site, or is this mail-in only?
We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, post-repair recoding, and supported module work). Mail-in module service is available nationwide. Quote the work and we will confirm the active service path for the 2008 Nissan Sentra. Do not ship a module unless support confirms next steps.
What kind of warranty do you offer on 2008 Nissan Sentra programming?
Every programming, cloning, and calibration job on the 2008 Nissan Sentra is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
Which modules on a 2008 Nissan Sentra can you actually service?
We program, clone, repair, or replace the full programmable-module stack on a 2008 Nissan Sentra. For this vehicle our database documents:
- 4 engine control (ECU/PCM)
- 1 transmission control (TCU/TCM)
- 1 body control (BCM and related)
- 3 ABS / brake control (EBCM)
- 1 immobilizer / security
- 2 key & fob
- 2 steering angle sensor (SAS)
- 1 ADAS module
Send the VIN and the operations performed and we will confirm support and pricing.
Additional Module Part Numbers
Additional OEM-sourced part numbers for the 2008 Nissan Sentra covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.
- ECU / PCM Part Numbers
- 23710-ET001, 23710-ZJ61A, 23710-ZJ68A, 23710-ZJ69A
- TCU / TCM Part Numbers
- 31036-ET00X
- Transmission Control Module (TCM) Part Numbers
- 31036-ET00X
Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.
Different trim or build?
Send your VIN and we'll confirm exact module support and pricing in the quote response.
Hit a security wall? We've got the keys.
1-year unlimited warranty on every flash and calibration.
Shared module fitment
Vehicles sharing modules with the 2008 Nissan Sentra
These vehicles use one or more of the same replacement modules indexed for this vehicle.
Finish the repair
Need help finishing this repair?
Get onsite help in Dallas-Fort Worth. Ask about same-day availability or a one-time remote session for eligible non-VSP work.
CONSULT III / IV Explore one-time factory coding and programming. We confirm the software and procedure for your vehicle. Module programming & recovery Replacing a module or dealing with a failed programming attempt? Send the part numbers and fault scan for review. Onsite tools & equipment Bring in a technician or ask about hourly, daily and weekly rentals where licensing and equipment availability allow.