VIN / Build Split
VIN pos 4-8 identifies model/body/engine. Nissan WMI: 1N4, 5N1, JN1. Position 4-5 = model. Position 10 = model year code.
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
DFW Mobile Service
DFW Serving Dallas / Fort Worth
2019 Nissan Sentra Supported Services
2019 Nissan Sentra
ADAS calibration, module programming, and security relearns
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Technical snapshot
- Platform Sentra B17 generation; verify exact build by VIN
- CAN Architecture Nissan multi-CAN (AV-CAN / MS-CAN); OBD2 DLC ISO 15765-4 CAN 500kbps
- Security Nissan NVIS IMMO3 (NATS Gen3); no OBD pin extraction; AKL via CONSULT-III Plus + ASIST; max 4 I-Keys
What do you need fixed?
Choose a service to start your quote.
OVERVIEW
Expert ADAS calibration, module programming, and diagnostic recovery for the 2019 Nissan Sentra. On this vehicle we cover documented systems include Forward camera / lane camera - if equipped, Forward radar / distance sensor - if equipped, and Blind-spot, sonar, around-view, and parking-camera systems - if equipped, this Sentra B17 generation; verify exact build by VIN platform vehicle, NATS / I-Key immobilizer support. Mobile across the DFW Metroplex; mail-in module service is available nationwide.
Platform
Sentra B17 generation; verify exact build by VIN
Production
2007-present
Trim Levels
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Drivetrain
FWD
Engine
-
CAN Speed
Nissan multi-CAN (AV-CAN / MS-CAN); OBD2 DLC ISO 15765-4 CAN 500kbps
YEAR-SPECIFIC NOTES
Exact-year service summary for 2019 Nissan Sentra
ADAS coverage
This 2019 Nissan Sentra page documents 3 ADAS systems, including Forward camera / lane camera - if equipped, Forward radar / distance sensor - if equipped, and Blind-spot, sonar, around-view, and parking-camera systems - if equipped.
View ADAS dataCalibration triggers
Documented calibration triggers include Windshield or forward-camera replacement, Front bumper, grille, or radar service, BCM/IPDM, key, or immobilizer module replacement, and ABS/VDC, steering-angle, or suspension service. Use the ADAS tab for the full trigger list.
View triggersProgrammable modules
This page indexes 11 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and IPC coverage.
View modulesGateway and security
This page includes 3 gateway, immobilizer, or key-security records for this 2019 Nissan Sentra.
View securityCore Auto Logic capability
Core Auto Logic supports exact-year diagnostics, ADAS calibration, module programming, and security-access planning for the 2019 Nissan Sentra using the documented systems and module data on this page.
Choose a sectionWhat changes on this exact year
Feature availability
Platform: Sentra B17 generation; verify exact build by VIN - Verify by VIN; NATS/NVIS / Intelligent Key equipment - Verify by VIN; Driver-assist and camera systems - if equipped - Verify by VIN
Driver-assist suite
Driver-assist equipment varies by year, trim, package, and build. Verify forward camera, radar, sonar, blind-spot, and parking-camera hardware by VIN before calibration. Do not apply newer-generation Nissan ProPILOT/Safety Shield package procedures unless the VIN confirms that equipment.
VIN and build split
VIN pos 4-8 identifies model/body/engine. Nissan WMI: 1N4, 5N1, JN1. Position 4-5 = model. Position 10 = model year code.
Infotainment context
8" NissanConnect; Apple CarPlay + Android Auto standard; wireless CarPlay on equipped trims
Network and access
CAN: Nissan multi-CAN (AV-CAN / MS-CAN); OBD2 DLC ISO 15765-4 CAN 500kbps
Tool access for this exact year
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
Factory scan, coding, and calibration access
Nissan CONSULT-III Plus
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
ADAS scan, setup, and verification
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Bench cloning and chip-level recovery
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Choose a section to view data
SUPPORTED SYSTEMS
What we service on this vehicle
Documented module coverage for the 2019 Nissan Sentra. Counts reflect modules our techs have programmed or calibrated on this exact platform.
ADAS Calibration
3 modules documented
Forward camera, radar, surround-view and lane-keep recalibration after windshield, suspension or fascia work.
Open ADAS tabEngine / ECU Programming
1 module documented
Powertrain reprogramming, calibration updates, replacement ECU configuration and security access.
Open Modules tabBCM / Body Programming
1 module documented
Body control module, gateway and accessory programming. Includes feature-bit reconfiguration.
Open Modules tabGateway / Security Access
1 module documented
Secure gateway module identification, bypass workflow and security-access planning before programming.
Open Security tabTCU / Transmission
1 module documented
Transmission control module reprogramming, adaptive learning reset and replacement TCM clone.
Open Modules tabSRS / Airbag Reset
2 modules documented
Crash-data clear, hard-code reset and replacement airbag module configuration.
Open Modules tabABS / Brake Module
1 module documented
ABS / EBCM bleed support, replacement module coding and yaw-rate sensor calibration.
Open Modules tabIPC, SAS & Other Modules
3 modules documented
Instrument cluster cloning, steering angle sensor calibration and other supporting modules.
Open Modules tabConnectivity & Accessories
2 modules documented
Infotainment radio, surround view, remote start, trailer brake controller and other equipped systems.
Open Modules tabRecalibration Triggers
4 modules documented
Service events that require ADAS recalibration on this vehicle. Tap to see what triggers what.
Open ADAS tabNeed something not listed? Most undocumented modules can still be programmed.
Get a QuoteFeature availability 3
Platform: Sentra B17 generation; verify exact build by VIN
Verify by VINUse model-year and VIN-specific Nissan service information when cross-referencing parts.
NATS/NVIS / Intelligent Key equipment
Verify by VINUse CONSULT/ASIST security and option-configuration procedures for module or key replacement.
Driver-assist and camera systems - if equipped
Verify by VINCalibrate only with the procedure and targets for the exact model year, trim, and build.
WHAT WE RESOLVE
Common issues on this vehicle
Common Nissan Sentra issues we resolve on this platform: Forward camera / lane camera - if equipped, Forward radar / distance sensor - if equipped, and Blind-spot, sonar, around-view, and parking-camera systems - if equipped recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - Sentra B17 generation; verify exact build by VIN platform uses Nissan multi-CAN (AV-CAN / MS-CAN); OBD2 DLC ISO 15765-4 CAN 500kbps.
ADAS CALIBRATION MATRIX
ADAS systems on this vehicle
Driver-assist equipment varies by year, trim, package, and build. Verify forward camera, radar, sonar, blind-spot, and parking-camera hardware by VIN before calibration. Do not apply newer-generation Nissan ProPILOT/Safety Shield package procedures unless the VIN confirms that equipment.
Scroll for part numbers and Details
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Forward camera / lane camera - if equipped | Forward Camera | - | Static or dynamic per Nissan service information | YES | - | |
| Forward radar / distance sensor - if equipped | Radar | - | Static or dynamic per Nissan service information | YES | - | |
| Blind-spot, sonar, around-view, and parking-camera systems - if equipped | Parking / Blind Spot / Camera | - | Initialization and calibration per Nissan service information | YES | - |
ADAS SYSTEM
YES Supported
Identification
- System type
- Module category
- Sensor location
Part Numbers
- OEM
- Alternative
Calibration & Triggers
- Calibration type
- Programming approach
- Requires PMI
- Trigger events
Technical Notes
- Chip / MCU
- Service notes
Need this calibrated?
Get a quote for ADAS calibration WHEN IS CALIBRATION REQUIRED?
Triggers for ADAS recalibration
Windshield or forward-camera replacement Affected: Forward camera/lane camera, AEB/LDW/ICC systems if equipped
Verify camera presence and run the Nissan alignment routine for the exact VIN after glass, camera, bracket, or related trim work.
Front bumper, grille, or radar service Affected: Forward radar, ICC/AEB, sonar, parking sensors if equipped
Inspect bracket condition, confirm model-year sensor aim specification, and perform required radar/sonar initialization.
BCM/IPDM, key, or immobilizer module replacement Affected: BCM, IPDM, NATS/NVIS, Intelligent Key, RKE, alarm
Use security access and Nissan service procedures for VIN registration, option configuration, key registration, and DTC checks.
ABS/VDC, steering-angle, or suspension service Affected: ABS/VDC, steering angle, yaw/lateral sensors, ADAS aim if equipped
Run required zero-point, bleed, alignment, calibration, and road test routines after module, chassis, or suspension work.
SRS Modules
SRS Control Unit 985P06LB8A
- Part number
- 985P06LB8A
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
SRS Control Unit 985P16LB8A
- Part number
- 985P16LB8A
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
ECU Modules
ECM / PCM - Nissan powertrain, VIN-specific
- Protocol / method
- CONSULT/ASIST programming per service information
- Coding required
- Yes
- Cloning supported
- Yes
- Notes
- Verify engine, transmission, emissions calibration, and module suffix by VIN. Perform VIN registration, idle/throttle learns, and NATS/NVIS sync as required.
BCM Modules
TCU / TCM Transmission Modules
TCU - CVT8 RE0F11A 31036-3JZ
- Part number
- 31036-3JZ
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Renesas SH7059
- Notes
- Jatco CVT8 relearn via Consult III+, NS-3 CVT fluid specification, TCU/ECM marriage required, belt ratio relearn mandatory
ABS / Brake Modules
ABS/VDC/ESC Module - VIN-specific
- Cloning supported
- Yes
- Notes
- Run CONSULT initialization, steering-angle/yaw zero-point, brake bleed, and road-test steps required by the exact build.
Other Modules (IPC, SAS)
Instrument Panel Cluster (IPC) 24810-3JZ4A
- Part number
- 24810-3JZ4A
- Cloning supported
- Yes
- Notes
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Steering Angle Sensor (SAS)
- Coding required
- Yes
- Notes
- INTEGRATED (clock spring / steering column module
Steering Angle Sensor (SAS)
- Coding required
- Yes
- Notes
- cross-year extension)
Connectivity & Accessories
RKE, Intelligent Key, sonar, camera, and convenience options - if equipped
- Notes
- Convenience equipment is package-dependent. Use Nissan service information for module replacement, option configuration, DTC checks, and subscription-dependent feature verification.
Gateway / Security Modules
Central Gateway Module
- Manufacturer
- NXP / Freescale
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- MPC5606BK
- Notes
- Compatibility label: X-TRAIL. BCM Notes: Read/Write
ARCHITECTURE & CONNECTIVITY
Architecture & Connectivity
- Body Construction
- B17 unibody sedan construction; verify exact trim and build by VIN
- OBD Protocol
- ISO 15765-4 CAN (500 kbps)
- CAN Architecture
- Nissan multi-CAN (AV-CAN / MS-CAN); OBD2 DLC ISO 15765-4 CAN 500kbps
- Infotainment
- 8" NissanConnect; Apple CarPlay + Android Auto standard; wireless CarPlay on equipped trims
- OTA Capable
- No
- ECU/TCM Unlocking
- Contact us
- ECU/TCM Flashing
- Confirmed
Reviewed coverage: 2019 - 1.6L DIG-T CVT.
Confirm the exact engine, ECU, and any prerequisite access method before service.
FREQUENTLY ASKED QUESTIONS
FAQ
How much does ADAS calibration cost for a 2019 Nissan Sentra?
ADAS calibration pricing for a 2019 Nissan Sentra depends on which of its 3 documented systems need work after a repair. This vehicle is documented with Forward camera / lane camera - if equipped, Forward radar / distance sensor - if equipped, and Blind-spot, sonar, around-view, and parking-camera systems - if equipped. We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.
Can you reset the airbag light on a 2019 Nissan Sentra?
Yes. The 2019 Nissan Sentra uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: 985P06LB8A. Mobile diagnosis and programming are available in DFW, and mail-in module service is available nationwide. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.
What is needed after replacing the windshield on a 2019 Nissan Sentra?
After windshield replacement on a 2019 Nissan Sentra, Forward camera / lane camera - if equipped, Forward radar / distance sensor - if equipped, and Blind-spot, sonar, around-view, and parking-camera systems - if equipped rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in module service is available nationwide for eligible module work.
How long does a 2019 Nissan Sentra module service take?
Most 2019 Nissan Sentra onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 11 programmable modules documented in our database (1 ECU, 1 BCM, 1 TCU, 1 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module service is available nationwide.
Do you cover the 2019 Nissan Sentra on-site, or is this mail-in only?
We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, post-repair recoding, and supported module work). Mail-in module service is available nationwide. Quote the work and we will confirm the active service path for the 2019 Nissan Sentra. Do not ship a module unless support confirms next steps.
What kind of warranty do you offer on 2019 Nissan Sentra programming?
Every programming, cloning, and calibration job on the 2019 Nissan Sentra is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
Which modules on a 2019 Nissan Sentra can you actually service?
We program, clone, repair, or replace the full programmable-module stack on a 2019 Nissan Sentra. For this vehicle our database documents:
- 1 engine control (ECU/PCM)
- 1 transmission control (TCU/TCM)
- 1 body control (BCM and related)
- 1 ABS / brake control (EBCM)
- 1 immobilizer / security
- 1 key & fob
- 1 instrument cluster (IPC)
- 2 steering angle sensor (SAS)
- 3 ADAS module
Send the VIN and the operations performed and we will confirm support and pricing.
Additional Module Part Numbers
Additional OEM-sourced part numbers for the 2019 Nissan Sentra covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.
- ADAS Module Part Numbers
- 28438-3JZ4A
- ECU / PCM Part Numbers
- 23710-3JZ8A, 23710-3JZ9A
- TCU / TCM Part Numbers
- 31036-3JZ
- SRS / Airbag Module Part Numbers
- 985P06LB8A, 985P16LB8A
- ABS / EBCM Part Numbers
- 47660-3JZ4A
- Instrument Cluster (IPC) Part Numbers
- 24810-3JZ4A
- Transmission Control Module (TCM) Part Numbers
- 31036-3JZ
Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.
Different trim or build?
Send your VIN and we'll confirm exact module support and pricing in the quote response.
Hit a security wall? We've got the keys.
1-year unlimited warranty on every flash and calibration.
Shared module fitment
Vehicles sharing modules with the 2019 Nissan Sentra
These vehicles use one or more of the same replacement modules indexed for this vehicle.
Finish the repair
Need help finishing this repair?
Get onsite help in Dallas-Fort Worth. Ask about same-day availability or a one-time remote session for eligible non-VSP work.
CONSULT III / IV Explore one-time factory coding and programming. We confirm the software and procedure for your vehicle. Module programming & recovery Replacing a module or dealing with a failed programming attempt? Send the part numbers and fault scan for review. Onsite tools & equipment Bring in a technician or ask about hourly, daily and weekly rentals where licensing and equipment availability allow.