Skip to main content
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
Same-Day Mobile Service
DFW Serving Dallas / Fort Worth
2015-2024 Nissan Murano Generation Guide

Nissan Murano 3rd Gen Z52 (2015-2024) ADAS Calibration & Module Programming

Covers model years 2015-2024 - one service guide for the whole generation.

Full ADAS calibration, module programming, and key security work for every Nissan Murano built on this platform. Same-day mobile service across the Dallas/Fort Worth metroplex; mail-in accepted nationwide.

  • Platform Nissan D-platform (3rd gen, 2015 redesign)
  • CAN Architecture HS-CAN (500 kbps); Nissan CAN; OBD2 DLC Pin 6/14
  • Security Nissan Intelligent Key (PEPS); rolling code transponder; CONSULT III Plus programmed

The ADAS, module, and security rows below are consolidated across the full 2015-2024 generation. A year badge marks rows that apply only to part of the span; rows without a badge apply to every year. Year-specific differences are summarized under “What changes across 2015-2024”.

OVERVIEW

Expert ADAS calibration, module programming, and diagnostic recovery for the 2024 Nissan Murano. On this vehicle we cover documented systems include Safety Shield 360 Forward Camera (Mobileye EyeQ4), Forward Radar (77GHz) - ACC / AEB, and Blind Spot Monitor Sensor - Left (BSM), this Nissan D-platform (3rd gen, 2015 redesign) platform vehicle, Nissan IMMU Gen 3; BCM rolling code immobilizer support. Mobile across the DFW Metroplex, mail-in nationwide for module-bench work.

Platform
Nissan D-platform (3rd gen, 2015 redesign)
Production
2015-present
Trim Levels
S, SV, SL, Platinum trims. Z52 platform. 3.5L V6, Xtronic CVT, FWD or AWD.
Drivetrain
FWD / AWD
Engine
-
CAN Speed
HS-CAN (500 kbps); Nissan CAN; OBD2 DLC Pin 6/14
Feature availability 4

Basic ADAS: Rear Cross Traffic Alert, Around View Monitor (on equipped trims)

Available

Calibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.

Immobilizer: Nissan IMMU Gen 3

Standard

Key programming requires manufacturer-level tool access. Add key supported. All keys lost (AKL) supported.

Platform: Nissan D-platform (3rd gen, 2015 redesign)

Confirmed

Verify platform code matches when cross-referencing part numbers across model years.

Nissan Safety Shield 360 (2019+): Automatic Emergency Braking with Pedestrian De

Available

Calibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.

TOOL ACCESS MATRIX

Tool access for this exact year

Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.

Factory scan, coding, and calibration access

Nissan CONSULT-III Plus

Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.

OEM subscription required

Make-level OEM tool map plus exact-year gateway and ADAS fields.

ADAS scan, setup, and verification

Autel, Launch Tech, Topdon

Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.

Tool subscription required

Service-level scanner-vendor source packet plus exact-year ADAS records.

Bench cloning and chip-level recovery

Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog

Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.

Bench/chip-level only

Bench programmer source packet plus exact-year module/security records.

PLATFORM

Know this platform

This platform uses HS-CAN (500 kbps); Nissan CAN; OBD2 DLC Pin 6/14 with ISO 15765-4 CAN (500 kbps).

CAN
HS-CAN (500 kbps); Nissan CAN; OBD2 DLC Pin 6/14
OBD
ISO 15765-4 CAN (500 kbps)
OPENPILOT / COMMA.AI

Openpilot Compatibility

Not Supported

Not supported - not in openpilot tree

Not in openpilot support tree as of April 2026. Murano not ported.

GENERATION SERVICE SNAPSHOT

Generation service summary for Nissan Murano 3rd Gen Z52 (2015-2024)

Generation coverage

This page consolidates Nissan Murano service data for 2015-2024 across 10 model years; 10 years have merged CCT data.

Choose a year

ADAS coverage

Merged ADAS coverage includes 70 system records, including Safety Shield 360 Forward Camera (Mobileye EyeQ4) (2015), Forward Radar (77GHz) - ACC / AEB (2015), Blind Spot Monitor Sensor - Left (BSM) (2015), and Blind Spot Monitor Sensor - Right (BSM) (2015). Year-marked systems apply only to the shown range.

View ADAS data

Calibration triggers

This generation has 11 merged calibration trigger records. Trigger applicability can vary by year - verify by VIN before setup.

View triggers

Programmable modules

The merged generation page indexes 58 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, IPC coverage. Part numbers are confirmed for the exact year/VIN.

View modules

Gateway and security

Gateway, immobilizer, and key-security coverage includes 3 merged records. Security procedures vary by year - verify by VIN.

View security

Core Auto Logic capability

Core Auto Logic supports generation-level diagnostics, ADAS calibration, module programming, security-access planning, and mail-in bench work for the Nissan Murano 2015-2024 span, with exact-year validation before service.

Get a quote
CALIBRATION

Do I need calibration?

ECM Replacement 2
2015-2019

Yes

CONSULT immobilizer work support + throttle position relearn.

2020-2024

Yes

CONSULT immobilizer work support + throttle position relearn.

ABS/VDC Module Replacement 2
2015-2019

Yes

CONSULT ABS bleed + VDC sensor reset.

2020-2024

Yes

CONSULT ABS bleed + VDC sensor reset.

Around View Monitor Camera Replacement 1
2015-2018

Conditional

If equipped: Around View Monitor (AVM) surround cameras require recalibration after replacement via CONSULT-III+.

Windshield Replacement 2
2019

Yes

Safety Shield 360 forward collision warning camera (windshield-mounted) requires recalibration via CONSULT-III+.

2020-2024

Yes

Safety Shield 360 forward collision warning camera (windshield-mounted) requires recalibration via CONSULT-III+.

Front Bumper/Radar Service 2
2019

Yes

Front radar module recalibration required after front bumper removal or radar replacement.

2020-2024

Yes

Front radar module recalibration required after front bumper removal or radar replacement.

Rear Bumper/Radar Service 2
2019

Yes

Rear cross-traffic radar recalibration after rear bumper work.

2020-2024

Yes

Rear cross-traffic radar recalibration after rear bumper work.

MODEL YEARS

Year-by-year details

YearTrim notes
2015S, SV, SL, Platinum trims. Z52 platform. 3.5L V6, Xtronic CVT, FWD or AWD.
2016S, SV, SL, Platinum trims. Z52 platform. 3.5L V6, Xtronic CVT, FWD or AWD.
2017S, SV, SL, Platinum trims. Z52 platform. 3.5L V6, Xtronic CVT, FWD or AWD.
2018S, SV, SL, Platinum trims. Z52 platform. 3.5L V6, Xtronic CVT, FWD or AWD.
2019S, SV, SL, Platinum trims. Z52 platform. 3.5L V6, Xtronic CVT, FWD or AWD.
2020S, SV, SL, Platinum trims. Z52 platform. 3.5L V6, Xtronic CVT, FWD or AWD.
2021S, SV, SL, Platinum trims. Z52 platform. 3.5L V6, Xtronic CVT, FWD or AWD.
2022S, SV, SL, Platinum trims. Z52 platform. 3.5L V6, Xtronic CVT, FWD or AWD.
2023S, SV, SL, Platinum trims. Z52 platform. 3.5L V6, Xtronic CVT, FWD or AWD.
2024S, SV, SL, Platinum trims. Z52 platform. 3.5L V6, Xtronic CVT, FWD or AWD.

70 ADAS systems documented across 2015-2024. Rows that apply to only part of the generation carry a year badge.

Filter by year
ADAS CALIBRATION MATRIX

ADAS systems on this vehicle

Nissan Safety Shield 360 (2019+): Automatic Emergency Braking with Pedestrian Detection, Blind Spot Warning, Rear Cross Traffic Alert, High Beam Assist, Lane Departure Warning/Prevention; ProPilot Assist (2021+): Adaptive Cruise with Lane Centering

Scroll for part numbers and Details
SystemTypeCategoryCal. TypeSupportedPart #Actions
Safety Shield 360 Forward Camera (Mobileye EyeQ4) 2015Forward CameraCameraStatic YES-
Forward Radar (77GHz) - ACC / AEB 2015Front RadarRadarStatic + Dynamic YES-
Blind Spot Monitor Sensor - Left (BSM) 2015Side RadarRadarStatic + Dynamic YES-
Blind Spot Monitor Sensor - Right (BSM) 2015Side RadarRadarStatic + Dynamic YES-
Rear View Camera (RVC) 2015Rear CameraCameraStatic YES-
Intelligent Around View Monitor (AVM) - 360° Surround 2015Surround CameraCameraStatic YES-
Park Distance Control (PDC) - Ultrasonic Sensors 2015Parking SensorUltrasonicNone YES-
Safety Shield 360 Forward Camera (Mobileye EyeQ4) 2016Forward CameraCameraStatic YES-
Forward Radar (77GHz) - ACC / AEB 2016Front RadarRadarStatic + Dynamic YES-
Blind Spot Monitor Sensor - Left (BSM) 2016Side RadarRadarStatic + Dynamic YES-
Blind Spot Monitor Sensor - Right (BSM) 2016Side RadarRadarStatic + Dynamic YES-
Rear View Camera (RVC) 2016Rear CameraCameraStatic YES-
Intelligent Around View Monitor (AVM) - 360° Surround 2016Surround CameraCameraStatic YES-
Park Distance Control (PDC) - Ultrasonic Sensors 2016Parking SensorUltrasonicNone YES-
Safety Shield 360 Forward Camera (Mobileye EyeQ4) 2017Forward CameraCameraStatic YES-
Forward Radar (77GHz) - ACC / AEB 2017Front RadarRadarStatic + Dynamic YES-
Blind Spot Monitor Sensor - Left (BSM) 2017Side RadarRadarStatic + Dynamic YES-
Blind Spot Monitor Sensor - Right (BSM) 2017Side RadarRadarStatic + Dynamic YES-
Rear View Camera (RVC) 2017Rear CameraCameraStatic YES-
Intelligent Around View Monitor (AVM) - 360° Surround 2017Surround CameraCameraStatic YES-
Park Distance Control (PDC) - Ultrasonic Sensors 2017Parking SensorUltrasonicNone YES-
Safety Shield 360 Forward Camera (Mobileye EyeQ4) 2018Forward CameraCameraStatic YES-
Forward Radar (77GHz) - ACC / AEB 2018Front RadarRadarStatic + Dynamic YES-
Blind Spot Monitor Sensor - Left (BSM) 2018Side RadarRadarStatic + Dynamic YES-
Blind Spot Monitor Sensor - Right (BSM) 2018Side RadarRadarStatic + Dynamic YES-
Rear View Camera (RVC) 2018Rear CameraCameraStatic YES-
Intelligent Around View Monitor (AVM) - 360° Surround 2018Surround CameraCameraStatic YES-
Park Distance Control (PDC) - Ultrasonic Sensors 2018Parking SensorUltrasonicNone YES-
Safety Shield 360 Forward Camera (Mobileye EyeQ4) 2019Forward CameraCameraStatic YES-
Forward Radar (77GHz) - ACC / AEB 2019Front RadarRadarStatic + Dynamic YES-
Blind Spot Monitor Sensor - Left (BSM) 2019Side RadarRadarStatic + Dynamic YES-
Blind Spot Monitor Sensor - Right (BSM) 2019Side RadarRadarStatic + Dynamic YES-
Rear View Camera (RVC) 2019Rear CameraCameraStatic YES-
Intelligent Around View Monitor (AVM) - 360° Surround 2019Surround CameraCameraStatic YES-
Park Distance Control (PDC) - Ultrasonic Sensors 2019Parking SensorUltrasonicNone YES-
Safety Shield 360 Forward Camera (Mobileye EyeQ4) 2020Forward CameraCameraStatic YES-
Forward Radar (77GHz) - ACC / AEB 2020Front RadarRadarStatic + Dynamic YES-
Blind Spot Monitor Sensor - Left (BSM) 2020Side RadarRadarStatic + Dynamic YES-
Blind Spot Monitor Sensor - Right (BSM) 2020Side RadarRadarStatic + Dynamic YES-
Rear View Camera (RVC) 2020Rear CameraCameraStatic YES-
Intelligent Around View Monitor (AVM) - 360° Surround 2020Surround CameraCameraStatic YES-
Park Distance Control (PDC) - Ultrasonic Sensors 2020Parking SensorUltrasonicNone YES-
Safety Shield 360 Forward Camera (Mobileye EyeQ4) 2021Forward CameraCameraStatic YES-
Forward Radar (77GHz) - ACC / AEB 2021Front RadarRadarStatic + Dynamic YES-
Blind Spot Monitor Sensor - Left (BSM) 2021Side RadarRadarStatic + Dynamic YES-
Blind Spot Monitor Sensor - Right (BSM) 2021Side RadarRadarStatic + Dynamic YES-
Rear View Camera (RVC) 2021Rear CameraCameraStatic YES-
Intelligent Around View Monitor (AVM) - 360° Surround 2021Surround CameraCameraStatic YES-
Park Distance Control (PDC) - Ultrasonic Sensors 2021Parking SensorUltrasonicNone YES-
Safety Shield 360 Forward Camera (Mobileye EyeQ4) 2022Forward CameraCameraStatic YES-
Forward Radar (77GHz) - ACC / AEB 2022Front RadarRadarStatic + Dynamic YES-
Blind Spot Monitor Sensor - Left (BSM) 2022Side RadarRadarStatic + Dynamic YES-
Blind Spot Monitor Sensor - Right (BSM) 2022Side RadarRadarStatic + Dynamic YES-
Rear View Camera (RVC) 2022Rear CameraCameraStatic YES-
Intelligent Around View Monitor (AVM) - 360° Surround 2022Surround CameraCameraStatic YES-
Park Distance Control (PDC) - Ultrasonic Sensors 2022Parking SensorUltrasonicNone YES-
Safety Shield 360 Forward Camera (Mobileye EyeQ4) 2023Forward CameraCameraStatic YES-
Forward Radar (77GHz) - ACC / AEB 2023Front RadarRadarStatic + Dynamic YES-
Blind Spot Monitor Sensor - Left (BSM) 2023Side RadarRadarStatic + Dynamic YES-
Blind Spot Monitor Sensor - Right (BSM) 2023Side RadarRadarStatic + Dynamic YES-
Rear View Camera (RVC) 2023Rear CameraCameraStatic YES-
Intelligent Around View Monitor (AVM) - 360° Surround 2023Surround CameraCameraStatic YES-
Park Distance Control (PDC) - Ultrasonic Sensors 2023Parking SensorUltrasonicNone YES-
Safety Shield 360 Forward Camera (Mobileye EyeQ4) 2024Forward CameraCameraStatic YES-
Forward Radar (77GHz) - ACC / AEB 2024Front RadarRadarStatic + Dynamic YES-
Blind Spot Monitor Sensor - Left (BSM) 2024Side RadarRadarStatic + Dynamic YES-
Blind Spot Monitor Sensor - Right (BSM) 2024Side RadarRadarStatic + Dynamic YES-
Rear View Camera (RVC) 2024Rear CameraCameraStatic YES-
Intelligent Around View Monitor (AVM) - 360° Surround 2024Surround CameraCameraStatic YES-
Park Distance Control (PDC) - Ultrasonic Sensors 2024Parking SensorUltrasonicNone YES-
WHEN IS CALIBRATION REQUIRED?

Triggers for ADAS recalibration

ECM Replacement 2015-2019

CONSULT immobilizer work support + throttle position relearn.

ABS/VDC Module Replacement 2015-2019

CONSULT ABS bleed + VDC sensor reset.

Around View Monitor Camera Replacement 2015-2018

If equipped: Around View Monitor (AVM) surround cameras require recalibration after replacement via CONSULT-III+.

Windshield Replacement 2019

Safety Shield 360 forward collision warning camera (windshield-mounted) requires recalibration via CONSULT-III+.

Front Bumper/Radar Service 2019

Front radar module recalibration required after front bumper removal or radar replacement.

Rear Bumper/Radar Service 2019

Rear cross-traffic radar recalibration after rear bumper work.

ECM Replacement 2020-2024

CONSULT immobilizer work support + throttle position relearn.

ABS/VDC Module Replacement 2020-2024

CONSULT ABS bleed + VDC sensor reset.

Windshield Replacement 2020-2024

Safety Shield 360 forward collision warning camera (windshield-mounted) requires recalibration via CONSULT-III+.

Front Bumper/Radar Service 2020-2024

Front radar module recalibration required after front bumper removal or radar replacement.

Rear Bumper/Radar Service 2020-2024

Rear cross-traffic radar recalibration after rear bumper work.

MODULE COVERAGE

Modules we program on this generation

58 documented Nissan Murano modules across 2015-2024. Open a group for part numbers, programming protocol, security notes, and clone support.

SRS MODULES

SRS Modules

SRS Control Unit x10
876505AC9A Verify by VIN 2015-2016, 2018-2019 Under center console

_years covers only 2015-2016, 2018-2019 for this generation

Used/donor module guide

Compatible donor years: 2015, 2016, 2018, 2019

Always match the full part number before buying a used module.

PART
876505AC9A
LOCATION
Under center console
MFG
Continental
NOTES
Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
876005AB6A Verify by VIN 2015-2016, 2018-2019 Under center console

_years covers only 2015-2016, 2018-2019 for this generation

Used/donor module guide

Compatible donor years: 2015, 2016, 2018, 2019

Always match the full part number before buying a used module.

PART
876005AB6A
LOCATION
Under center console
MFG
Continental
NOTES
Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
87650-5AC9A Verify by VIN 2017 Under center console

_years covers only 2017 for this generation

Used/donor module guide

Compatible donor years: 2017

Always match the full part number before buying a used module.

PART
87650-5AC9A
LOCATION
Under center console
MFG
Continental
NOTES
Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
87600-5AB6A Verify by VIN 2017 Under center console

_years covers only 2017 for this generation

Used/donor module guide

Compatible donor years: 2017

Always match the full part number before buying a used module.

PART
87600-5AB6A
LOCATION
Under center console
MFG
Continental
NOTES
Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
985R0-9UF9A Verify by VIN 2020, 2024 Under center console

_years covers only 2020, 2024 for this generation

Used/donor module guide

Compatible donor years: 2020, 2024

Always match the full part number before buying a used module.

PART
985R0-9UF9A
LOCATION
Under center console
MFG
Continental
NOTES
Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
985R09UF9A Verify by VIN 2021-2023 Under center console

_years covers only 2021-2023 for this generation

Used/donor module guide

Compatible donor years: 2021, 2022, 2023

Always match the full part number before buying a used module.

PART
985R09UF9A
LOCATION
Under center console
MFG
Continental
NOTES
Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
98510-5AA8A Verify by VIN 2024 Under center console

_years covers only 2024 for this generation

Used/donor module guide

Compatible donor years: 2024

Always match the full part number before buying a used module.

PART
98510-5AA8A
LOCATION
Under center console
MFG
Continental
NOTES
Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
985P0-9UA9A Verify by VIN 2024 Under center console

_years covers only 2024 for this generation

Used/donor module guide

Compatible donor years: 2024

Always match the full part number before buying a used module.

PART
985P0-9UA9A
LOCATION
Under center console
MFG
Continental
NOTES
Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
985P1-9UA9A Verify by VIN 2024 Under center console

_years covers only 2024 for this generation

Used/donor module guide

Compatible donor years: 2024

Always match the full part number before buying a used module.

PART
985P1-9UA9A
LOCATION
Under center console
MFG
Continental
NOTES
Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
985R0-9UF8B Verify by VIN 2024 Under center console

_years covers only 2024 for this generation

Used/donor module guide

Compatible donor years: 2024

Always match the full part number before buying a used module.

PART
985R0-9UF8B
LOCATION
Under center console
MFG
Continental
NOTES
Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
ECU MODULES

ECU Modules

Engine Control Module (ECM) Verify by VIN 2015-2017

_years covers only 2015-2017 for this generation

Used/donor module guide

Compatible donor years: 2015, 2016, 2017

Always match the full part number before buying a used module.

PROTOCOL
OBD
SECURITY
NATS 7 / AES-128
CODING
Yes
CLONE
Yes
NOTES
ECM programming requires VIN encoding and security seed/key exchange via our diagnostic software. Cloning supported on pre-2018 units.
Transmission Control Module (TCM) Verify by VIN 2015-2017

_years covers only 2015-2017 for this generation

Used/donor module guide

Compatible donor years: 2015, 2016, 2017

Always match the full part number before buying a used module.

PROTOCOL
OBD
SECURITY
NATS 7 / AES-128
CODING
Yes
CLONE
Yes
NOTES
TCM requires shift-point calibration and VIN adaptation after replacement via our diagnostic software. Cloning supported on pre-2018 automatic units.
Body Control Module (BCM) Verify by VIN 2015-2017

_years covers only 2015-2017 for this generation

Used/donor module guide

Compatible donor years: 2015, 2016, 2017

Always match the full part number before buying a used module.

PROTOCOL
OBD
SECURITY
NATS 7 / AES-128
CODING
Yes
CLONE
Yes
NOTES
BCM requires coding to vehicle VIN after replacement. Door/window and lighting modules re-sync recommended after BCM swap.
Engine Control Module (ECM) Verify by VIN 2018-2024

_years covers only 2018-2024 for this generation

Used/donor module guide

Compatible donor years: 2018, 2019, 2020, 2021, 2022, 2023, 2024

Always match the full part number before buying a used module.

PROTOCOL
OBD
SECURITY
NATS 7 / AES-128
CODING
Yes
CLONE
No
NOTES
ECM programming requires VIN encoding and security seed/key exchange via our diagnostic software. Online server authentication required. Cloning not supported on 2018+ VIN-locked units.
Transmission Control Module (TCM) Verify by VIN 2018-2024

_years covers only 2018-2024 for this generation

Used/donor module guide

Compatible donor years: 2018, 2019, 2020, 2021, 2022, 2023, 2024

Always match the full part number before buying a used module.

PROTOCOL
OBD
SECURITY
NATS 7 / AES-128
CODING
Yes
CLONE
No
NOTES
TCM requires shift-point calibration and VIN adaptation after replacement via our diagnostic software. Cloning not supported.
Body Control Module (BCM) Verify by VIN 2018-2024

_years covers only 2018-2024 for this generation

Used/donor module guide

Compatible donor years: 2018, 2019, 2020, 2021, 2022, 2023, 2024

Always match the full part number before buying a used module.

PROTOCOL
OBD
SECURITY
NATS 7 / AES-128
CODING
Yes
CLONE
No
NOTES
BCM requires coding to vehicle VIN after replacement. Security gateway access required on 2018+ models. All comfort/convenience modules must be re-synced via our diagnostic software.
BCM MODULES

BCM Modules

Body Control Module (BCM) x10
~(VERIFY VIA CONSULT FOR MURANO 2015) Verify by VIN 2015

_years covers only 2015 for this generation

Used/donor module guide

Compatible donor years: 2015

Always match the full part number before buying a used module.

PART
~(VERIFY VIA CONSULT FOR MURANO 2015)
NOTES
CONSULT-III Plus required for BCM programming and VIN registration after replacement. MURANO BCM controls lighting, door locks, windows, TPMS display, wipers, horn, and remote start logic. Program all option codes per VIN via CONSULT. Verify all body functions and NATS sync after replacement.
~(VERIFY VIA CONSULT FOR MURANO 2016) Verify by VIN 2016

_years covers only 2016 for this generation

Used/donor module guide

Compatible donor years: 2016

Always match the full part number before buying a used module.

PART
~(VERIFY VIA CONSULT FOR MURANO 2016)
NOTES
CONSULT-III Plus required for BCM programming and VIN registration after replacement. MURANO BCM controls lighting, door locks, windows, TPMS display, wipers, horn, and remote start logic. Program all option codes per VIN via CONSULT. Verify all body functions and NATS sync after replacement.
~(VERIFY VIA CONSULT FOR MURANO 2017) Verify by VIN 2017

_years covers only 2017 for this generation

Used/donor module guide

Compatible donor years: 2017

Always match the full part number before buying a used module.

PART
~(VERIFY VIA CONSULT FOR MURANO 2017)
NOTES
CONSULT-III Plus required for BCM programming and VIN registration after replacement. MURANO BCM controls lighting, door locks, windows, TPMS display, wipers, horn, and remote start logic. Program all option codes per VIN via CONSULT. Verify all body functions and NATS sync after replacement.
~(VERIFY VIA CONSULT FOR MURANO 2018) Verify by VIN 2018

_years covers only 2018 for this generation

Used/donor module guide

Compatible donor years: 2018

Always match the full part number before buying a used module.

PART
~(VERIFY VIA CONSULT FOR MURANO 2018)
NOTES
CONSULT-III Plus required for BCM programming and VIN registration after replacement. MURANO BCM controls lighting, door locks, windows, TPMS display, wipers, horn, and remote start logic. Program all option codes per VIN via CONSULT. Verify all body functions and NATS sync after replacement.
~(VERIFY VIA CONSULT FOR MURANO 2019) Verify by VIN 2019

_years covers only 2019 for this generation

Used/donor module guide

Compatible donor years: 2019

Always match the full part number before buying a used module.

PART
~(VERIFY VIA CONSULT FOR MURANO 2019)
NOTES
CONSULT-III Plus required for BCM programming and VIN registration after replacement. MURANO BCM controls lighting, door locks, windows, TPMS display, wipers, horn, and remote start logic. Program all option codes per VIN via CONSULT. Verify all body functions and NATS sync after replacement.
~(VERIFY VIA CONSULT FOR MURANO 2020) Verify by VIN 2020

_years covers only 2020 for this generation

Used/donor module guide

Compatible donor years: 2020

Always match the full part number before buying a used module.

PART
~(VERIFY VIA CONSULT FOR MURANO 2020)
NOTES
CONSULT-III Plus required for BCM programming and VIN registration after replacement. MURANO BCM controls lighting, door locks, windows, TPMS display, wipers, horn, and remote start logic. Program all option codes per VIN via CONSULT. Verify all body functions and NATS sync after replacement.
~(VERIFY VIA CONSULT FOR MURANO 2021) Verify by VIN 2021

_years covers only 2021 for this generation

Used/donor module guide

Compatible donor years: 2021

Always match the full part number before buying a used module.

PART
~(VERIFY VIA CONSULT FOR MURANO 2021)
NOTES
CONSULT-III Plus required for BCM programming and VIN registration after replacement. MURANO BCM controls lighting, door locks, windows, TPMS display, wipers, horn, and remote start logic. Program all option codes per VIN via CONSULT. Verify all body functions and NATS sync after replacement.
~(VERIFY VIA CONSULT FOR MURANO 2022) Verify by VIN 2022

_years covers only 2022 for this generation

Used/donor module guide

Compatible donor years: 2022

Always match the full part number before buying a used module.

PART
~(VERIFY VIA CONSULT FOR MURANO 2022)
NOTES
CONSULT-III Plus required for BCM programming and VIN registration after replacement. MURANO BCM controls lighting, door locks, windows, TPMS display, wipers, horn, and remote start logic. Program all option codes per VIN via CONSULT. Verify all body functions and NATS sync after replacement.
~(VERIFY VIA CONSULT FOR MURANO 2023) Verify by VIN 2023

_years covers only 2023 for this generation

Used/donor module guide

Compatible donor years: 2023

Always match the full part number before buying a used module.

PART
~(VERIFY VIA CONSULT FOR MURANO 2023)
NOTES
CONSULT-III Plus required for BCM programming and VIN registration after replacement. MURANO BCM controls lighting, door locks, windows, TPMS display, wipers, horn, and remote start logic. Program all option codes per VIN via CONSULT. Verify all body functions and NATS sync after replacement.
~(VERIFY VIA CONSULT FOR MURANO 2024) Verify by VIN 2024

_years covers only 2024 for this generation

Used/donor module guide

Compatible donor years: 2024

Always match the full part number before buying a used module.

PART
~(VERIFY VIA CONSULT FOR MURANO 2024)
NOTES
CONSULT-III Plus required for BCM programming and VIN registration after replacement. MURANO BCM controls lighting, door locks, windows, TPMS display, wipers, horn, and remote start logic. Program all option codes per VIN via CONSULT. Verify all body functions and NATS sync after replacement.
Intelligent Key ECU x10
~(VERIFY VIA CONSULT FOR MURANO 2015) Verify by VIN 2015

_years covers only 2015 for this generation

Used/donor module guide

Compatible donor years: 2015

Always match the full part number before buying a used module.

PART
~(VERIFY VIA CONSULT FOR MURANO 2015)
NOTES
CONSULT-III Plus + ASIST authorization required for Intelligent Key replacement. All registered keys are erased upon ECU replacement. Maximum 4 Intelligent Keys. Register all customer keys via CONSULT key registration procedure. Verify push-button start and all remote functions after programming.
~(VERIFY VIA CONSULT FOR MURANO 2016) Verify by VIN 2016

_years covers only 2016 for this generation

Used/donor module guide

Compatible donor years: 2016

Always match the full part number before buying a used module.

PART
~(VERIFY VIA CONSULT FOR MURANO 2016)
NOTES
CONSULT-III Plus + ASIST authorization required for Intelligent Key replacement. All registered keys are erased upon ECU replacement. Maximum 4 Intelligent Keys. Register all customer keys via CONSULT key registration procedure. Verify push-button start and all remote functions after programming.
~(VERIFY VIA CONSULT FOR MURANO 2017) Verify by VIN 2017

_years covers only 2017 for this generation

Used/donor module guide

Compatible donor years: 2017

Always match the full part number before buying a used module.

PART
~(VERIFY VIA CONSULT FOR MURANO 2017)
NOTES
CONSULT-III Plus + ASIST authorization required for Intelligent Key replacement. All registered keys are erased upon ECU replacement. Maximum 4 Intelligent Keys. Register all customer keys via CONSULT key registration procedure. Verify push-button start and all remote functions after programming.
~(VERIFY VIA CONSULT FOR MURANO 2018) Verify by VIN 2018

_years covers only 2018 for this generation

Used/donor module guide

Compatible donor years: 2018

Always match the full part number before buying a used module.

PART
~(VERIFY VIA CONSULT FOR MURANO 2018)
NOTES
CONSULT-III Plus + ASIST authorization required for Intelligent Key replacement. All registered keys are erased upon ECU replacement. Maximum 4 Intelligent Keys. Register all customer keys via CONSULT key registration procedure. Verify push-button start and all remote functions after programming.
~(VERIFY VIA CONSULT FOR MURANO 2019) Verify by VIN 2019

_years covers only 2019 for this generation

Used/donor module guide

Compatible donor years: 2019

Always match the full part number before buying a used module.

PART
~(VERIFY VIA CONSULT FOR MURANO 2019)
NOTES
CONSULT-III Plus + ASIST authorization required for Intelligent Key replacement. All registered keys are erased upon ECU replacement. Maximum 4 Intelligent Keys. Register all customer keys via CONSULT key registration procedure. Verify push-button start and all remote functions after programming.
~(VERIFY VIA CONSULT FOR MURANO 2020) Verify by VIN 2020

_years covers only 2020 for this generation

Used/donor module guide

Compatible donor years: 2020

Always match the full part number before buying a used module.

PART
~(VERIFY VIA CONSULT FOR MURANO 2020)
NOTES
CONSULT-III Plus + ASIST authorization required for Intelligent Key replacement. All registered keys are erased upon ECU replacement. Maximum 4 Intelligent Keys. Register all customer keys via CONSULT key registration procedure. Verify push-button start and all remote functions after programming.
~(VERIFY VIA CONSULT FOR MURANO 2021) Verify by VIN 2021

_years covers only 2021 for this generation

Used/donor module guide

Compatible donor years: 2021

Always match the full part number before buying a used module.

PART
~(VERIFY VIA CONSULT FOR MURANO 2021)
NOTES
CONSULT-III Plus + ASIST authorization required for Intelligent Key replacement. All registered keys are erased upon ECU replacement. Maximum 4 Intelligent Keys. Register all customer keys via CONSULT key registration procedure. Verify push-button start and all remote functions after programming.
~(VERIFY VIA CONSULT FOR MURANO 2022) Verify by VIN 2022

_years covers only 2022 for this generation

Used/donor module guide

Compatible donor years: 2022

Always match the full part number before buying a used module.

PART
~(VERIFY VIA CONSULT FOR MURANO 2022)
NOTES
CONSULT-III Plus + ASIST authorization required for Intelligent Key replacement. All registered keys are erased upon ECU replacement. Maximum 4 Intelligent Keys. Register all customer keys via CONSULT key registration procedure. Verify push-button start and all remote functions after programming.
~(VERIFY VIA CONSULT FOR MURANO 2023) Verify by VIN 2023

_years covers only 2023 for this generation

Used/donor module guide

Compatible donor years: 2023

Always match the full part number before buying a used module.

PART
~(VERIFY VIA CONSULT FOR MURANO 2023)
NOTES
CONSULT-III Plus + ASIST authorization required for Intelligent Key replacement. All registered keys are erased upon ECU replacement. Maximum 4 Intelligent Keys. Register all customer keys via CONSULT key registration procedure. Verify push-button start and all remote functions after programming.
~(VERIFY VIA CONSULT FOR MURANO 2024) Verify by VIN 2024

_years covers only 2024 for this generation

Used/donor module guide

Compatible donor years: 2024

Always match the full part number before buying a used module.

PART
~(VERIFY VIA CONSULT FOR MURANO 2024)
NOTES
CONSULT-III Plus + ASIST authorization required for Intelligent Key replacement. All registered keys are erased upon ECU replacement. Maximum 4 Intelligent Keys. Register all customer keys via CONSULT key registration procedure. Verify push-button start and all remote functions after programming.
Power Window Module / Door Modules Verify by VIN x1

coding and programming fields are absent or ambiguous

Used/donor module guide

Compatible donor years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024

Always match the full part number before buying a used module.

NOTES
CONSULT body systems check after window regulator or motor replacement. Perform window learning/initialization sequence via CONSULT if auto-up/down function is lost.
TCU / TCM TRANSMISSION MODULES

TCU / TCM Transmission Modules

TCU - CVT8 Continuously Variable Transmission Verify by VIN 2015-2016 31036-5AA0

_years covers only 2015-2016 for this generation

Used/donor module guide

Compatible donor years: 2015, 2016

Always match the full part number before buying a used module.

PART
31036-5AA0
PROTOCOL
J2534
CODING
Yes
CLONE
No
CHIP/MCU
Renesas SH7058
NOTES
CVT relearn via CONSULT III+, NS-3 CVT fluid spec, VIN coding mandatory
TCU - CVT8 Continuously Variable Transmission Verify by VIN 2017-2018 31036-5AA0X

_years covers only 2017-2018 for this generation

Used/donor module guide

Compatible donor years: 2017, 2018

Always match the full part number before buying a used module.

PART
31036-5AA0X
PROTOCOL
J2534
CODING
Yes
CLONE
No
CHIP/MCU
Renesas SH72546
NOTES
CVT relearn required via CONSULT III+, NS-3 CVT fluid specification, VIN programming mandatory
TCU - CVT Xtronic Verify by VIN 2019-2020 31036

_years covers only 2019-2020 for this generation

Used/donor module guide

Compatible donor years: 2019, 2020

Donor must match part family 31036 - requires cloning

Always match the full part number before buying a used module.

PART
31036
PROTOCOL
J2534
CODING
Yes
CLONE
Yes
CHIP/MCU
Renesas SH72531
NOTES
CVT fluid NS-3 required, TCU relearn via CONSULT III+, shift point adaptation required
TCU - CVT8 Xtronic CVT Verify by VIN 2021-2022 31036-5AA0X

_years covers only 2021-2022 for this generation

Used/donor module guide

Compatible donor years: 2021, 2022

Always match the full part number before buying a used module.

PART
31036-5AA0X
PROTOCOL
J2534
CODING
Yes
CLONE
No
CHIP/MCU
Renesas SH72531
NOTES
CVT relearn via CONSULT III+, NS-3 CVT fluid, VIN coding mandatory, steering angle sensor calibration required
TCU - CVT8 Continuously Variable Transmission Verify by VIN 2023-2024 31036-5AA0

_years covers only 2023-2024 for this generation

Used/donor module guide

Compatible donor years: 2023, 2024

Donor must match part family 31036-5AA0 - requires cloning

Always match the full part number before buying a used module.

PART
31036-5AA0
PROTOCOL
J2534
CODING
Yes
CLONE
Yes
CHIP/MCU
Renesas SH72533
NOTES
Requires CONSULT III+ or equivalent. CVT relearn procedure mandatory after programming. Use Nissan CVT Fluid NS-3 only. VIN coding required.
ABS / BRAKE MODULES

ABS / Brake Modules

ABS Actuator and Electric Unit (Control Unit) Verify by VIN

coding and programming fields are absent or ambiguous

Used/donor module guide

Compatible donor years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024

Always match the full part number before buying a used module.

NOTES
Nissan ABS/VDC. CONSULT-III+ self-diagnosis + air bleeding work support.
Wheel Speed Sensor - Front (each) Verify by VIN

coding and programming fields are absent or ambiguous

Used/donor module guide

Compatible donor years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024

Always match the full part number before buying a used module.

NOTES
Active sensor. DTC C1101/C1102 series.
Wheel Speed Sensor - Rear (each) Verify by VIN

coding and programming fields are absent or ambiguous

Used/donor module guide

Compatible donor years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024

Always match the full part number before buying a used module.

NOTES
Active sensor.
OTHER MODULES (IPC, SAS)

Other Modules (IPC, SAS)

Instrument Panel Cluster (IPC) x5
24810-5AA0A Verify by VIN 2015

_years covers only 2015 for this generation

Used/donor module guide

Compatible donor years: 2015

Donor must match part family 24810-5AA0A - requires cloning

Always match the full part number before buying a used module.

PART
24810-5AA0A
CLONE
Yes
NOTES
IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
24810-5AA1A Verify by VIN 2016, 2020-2024

_years covers only 2016, 2020-2024 for this generation

Used/donor module guide

Compatible donor years: 2016, 2020, 2021, 2022, 2023, 2024

Donor must match part family 24810-5AA1A - requires cloning

Always match the full part number before buying a used module.

PART
24810-5AA1A
CLONE
Yes
NOTES
IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
24810-5AA2A Verify by VIN 2017

_years covers only 2017 for this generation

Used/donor module guide

Compatible donor years: 2017

Donor must match part family 24810-5AA2A - requires cloning

Always match the full part number before buying a used module.

PART
24810-5AA2A
CLONE
Yes
NOTES
IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
24810-5AA3A Verify by VIN 2018

_years covers only 2018 for this generation

Used/donor module guide

Compatible donor years: 2018

Donor must match part family 24810-5AA3A - requires cloning

Always match the full part number before buying a used module.

PART
24810-5AA3A
CLONE
Yes
NOTES
IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
24810-5AA4A Verify by VIN 2019

_years covers only 2019 for this generation

Used/donor module guide

Compatible donor years: 2019

Donor must match part family 24810-5AA4A - requires cloning

Always match the full part number before buying a used module.

PART
24810-5AA4A
CLONE
Yes
NOTES
IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Steering Angle Sensor (SAS) x3
Part 1 Verify by VIN 2015-2019

_years covers only 2015-2019 for this generation

Used/donor module guide

Compatible donor years: 2015, 2016, 2017, 2018, 2019

Always match the full part number before buying a used module.

CODING
Yes
NOTES
INTEGRATED (clock spring / steering column module
Part 2 Verify by VIN 2015-2019

_years covers only 2015-2019 for this generation

Used/donor module guide

Compatible donor years: 2015, 2016, 2017, 2018, 2019

Always match the full part number before buying a used module.

CODING
Yes
NOTES
cross-year extension)
Part 3 Verify by VIN 2020-2024

_years covers only 2020-2024 for this generation

Used/donor module guide

Compatible donor years: 2020, 2021, 2022, 2023, 2024

Always match the full part number before buying a used module.

CODING
Yes
NOTES
INTEGRATED (spiral cable 25554 family)
CONNECTIVITY & ACCESSORIES

Connectivity & Accessories

8" NissanConnect touchscreen Verify by VIN 2015-2022

_years covers only 2015-2022 for this generation

Used/donor module guide

Compatible donor years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022

Always match the full part number before buying a used module.

NOTES
Programming required after replacement. Verify software version compatibility before install.
Remote Start Verify by VIN 2015-2017

_years covers only 2015-2017 for this generation

Used/donor module guide

Compatible donor years: 2015, 2016, 2017

Always match the full part number before buying a used module.

NOTES
Factory remote start. BCM configuration required after replacement on equipped vehicles.
Remote Start Verify by VIN 2018-2024

_years covers only 2018-2024 for this generation

Used/donor module guide

Compatible donor years: 2018, 2019, 2020, 2021, 2022, 2023, 2024

Always match the full part number before buying a used module.

NOTES
Factory remote start. BCM configuration required after replacement on equipped vehicles.
12.3" NissanConnect touchscreen with dual-zone OTA Verify by VIN 2023-2024

_years covers only 2023-2024 for this generation

Used/donor module guide

Compatible donor years: 2023, 2024

Always match the full part number before buying a used module.

NOTES
Programming required after replacement. Verify software version compatibility before install.

3 gateway, immobilizer, and security items documented across 2015-2024.

GATEWAY / SECURITY MODULES

Gateway / Security Modules

Central Gateway Module Dealer security required

vin_locked indicates immobilizer or VIN security

Used/donor module guide

Compatible donor years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024

Always match the full part number before buying a used module.

MFG
NXP / Freescale
SECURITY
VIN-locked (UDS)
VIN LOCKED
Yes
CODING
Yes
CHIP/MCU
MPC5606BK
NOTES
Compatibility label: X-TRAIL. BCM | Notes: Read/Write
KEY SECURITY & IMMOBILIZER

Key Security & Immobilizer

  • System Nissan IMMU Gen 3; BCM rolling code
  • Add Key Yes - CONSULT III Plus
  • All Keys Lost Yes - CONSULT III Plus

Nissan Intelligent Key (PEPS); rolling code transponder; CONSULT III Plus programmed

IMMOBILIZER MODULES

Immobilizer Modules

Module 1 Bench clone required

service_notes indicates cloning or bench work

Used/donor module guide

Compatible donor years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024

Always match the full part number before buying a used module.

NOTES
NATS 7 AES-secured system. Dealer PIN required for all-keys-lost. Add-key with working key via our diagnostic software.
KEY & FOB TYPES

Key & Fob Types

Intelligent Key (Proximity) OBD coding supported

service_notes indicates OBD programming or coding

Used/donor module guide

Compatible donor years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024

Always match the full part number before buying a used module.

NOTES
NATS 7 Intelligent Key. Program via OBD with our key programming equipment. Working key or dealer PIN required for all-keys-lost.

Replacement Notes

Nissan IMMU Gen 3; BCM rolling code system. CONSULT-III Plus required for key programming and module replacement. Pin extraction: limited (aes encryption); akl supported.

ARCHITECTURE & CONNECTIVITY

Architecture & Connectivity

Body Construction
High-strength steel unibody; aluminum hood
OBD Protocol
ISO 15765-4 CAN (500 kbps)
CAN Architecture
HS-CAN (500 kbps); Nissan CAN; OBD2 DLC Pin 6/14
Infotainment
12.3" NissanConnect touchscreen with dual-zone OTA; wireless Apple CarPlay/Android Auto
OTA Capable
Partial
ECU Unlock Supported
No
Custom Programming
Yes
WHAT WE RESOLVE

3rd Gen Z52 (2015-2024) common module and ADAS issues

  • ADAS calibration drift Watch for calibration needs after windshield, bumper, suspension, camera, or radar work. Documented systems include Safety Shield 360 Forward Camera (Mobileye EyeQ4) (2015), Forward Radar (77GHz) - ACC / AEB (2015), Blind Spot Monitor Sensor - Left (BSM) (2015), and Blind Spot Monitor Sensor - Right (BSM) (2015). Year-marked systems apply only to the shown range.
  • SRS crash-data and warning light SRS service can involve SRS Control Unit (2015-2016, 2018-2019), SRS Control Unit (2017), and SRS Control Unit (2020, 2024). Part numbers and crash-data workflow are confirmed for the exact year/VIN.
  • Replacement module setup ECU/PCM replacement programming, BCM configuration, TCU/TCM cloning, ABS/EBCM setup are represented in the merged generation data. Rows with year ranges do not apply to every model year; verify by VIN.
  • Gateway, key, and immobilizer access Gateway, key, and immobilizer procedures are represented by 3 merged security records. Access and all-keys-lost support varies by year - verify by VIN.
FREQUENTLY ASKED QUESTIONS

FAQ

Can you program Nissan Murano (2015-2024) modules?

Yes. Core Auto Logic supports generation-scoped module programming for the Nissan Murano (2015-2024). The merged generation data includes ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS coverage. Rows marked with a year range apply only to that part of the span; unmarked rows are present across the merged generation data.

Which modules are documented for Nissan Murano (2015-2024)?

The Nissan Murano (2015-2024) generation currently shows 45 core module records across ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS groups. SRS examples include SRS Control Unit (2015-2016, 2018-2019), SRS Control Unit (2017), and SRS Control Unit (2020, 2024). Part numbers and module variants must be confirmed for your exact year/VIN. Reference part number: 876505AC9A (2015-2016, 2018-2019) - confirm for your exact year/VIN.

Does Nissan Murano (2015-2024) need ADAS calibration after glass or collision work?

The merged generation data documents 70 ADAS systems, including Safety Shield 360 Forward Camera (Mobileye EyeQ4) (2015), Forward Radar (77GHz) - ACC / AEB (2015), Blind Spot Monitor Sensor - Left (BSM) (2015), Blind Spot Monitor Sensor - Right (BSM) (2015), and Rear View Camera (RVC) (2015). Calibration triggers include ECM Replacement (2015-2019), ABS/VDC Module Replacement (2015-2019), Around View Monitor Camera Replacement (2015-2018), and Windshield Replacement (2019). Procedure type is VIN-specific scan-tool procedure; verify exact requirements by VIN before setup.

Can you reset the airbag module on Nissan Murano (2015-2024)?

Yes. The generation data includes 10 SRS records, including SRS Control Unit (2015-2016, 2018-2019), SRS Control Unit (2017), and SRS Control Unit (2020, 2024). Bench reset, cloning, and replacement setup are handled after part-number review. Any SRS part number shown for this generation is planning data only - confirm for your exact year/VIN. Reference part number: 876505AC9A (2015-2016, 2018-2019) - confirm for your exact year/VIN.

Do all Nissan Murano (2015-2024) years use the same parts?

No assumption should be made across the full span. The generation page merges rows across 2015-2024; any row that does not span all data-bearing years is printed with its year range or treated as varies by year - verify by VIN. Part numbers always require exact year/VIN confirmation before ordering, cloning, or programming.

Can you program keys or immobilizer systems for Nissan Murano (2015-2024)?

Yes, where the VIN and security workflow support it. The generation data includes 3 gateway, immobilizer, or key-security records. Gateway examples include Central Gateway Module. Key records are present in the merged generation data. Security access, all-keys-lost eligibility, and add-key workflows vary by year - verify by VIN.

How long does service take for Nissan Murano (2015-2024)?

Most programming, cloning, SRS, and calibration jobs are quoted after VIN, DTC, part number, and repair-scope review. Labor time varies by year - verify by VIN before scheduling. Mail-in module work typically depends on module condition, donor data, and shipping window.

Is Nissan Murano (2015-2024) service mobile or mail-in?

Both paths are available depending on the job. Mobile service covers DFW on-vehicle diagnostics, ADAS setup, key programming, and post-repair coding. Mail-in service covers ECU, BCM, SRS, TCU, ABS, and other bench module work nationwide. We confirm the correct path for your exact year/VIN before scheduling.

OTHER GENERATIONS

More Murano generations

3rd Gen Z52 2015-2024 You are here 4th Gen Z53 2025-2026