We provide the software and equipment for the agreed work. The exact tool and procedure depend on your year, VIN and module.
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
DFW Mobile Service
DFW Serving Dallas / Fort Worth
4th Gen Z53 - 2025-2026 generation coverage
2025-2026 Nissan Murano service guide ADAS Calibration & Module Programming
Choose a repair service below or find your module by part number. Onsite help is available in Dallas-Fort Worth, with mail-in module service nationwide.
What do you need fixed?
Choose a service to start your quote.
Find your module
24 documented Nissan Murano module records across the 2025-2026 generation. Search by module name or part number, then open a result for requirements and repair options.
No matching records. Try a shorter part number or clear the filters. You can still request help if your module is not listed.
ECU / Engine
Engine Control Module (ECM) Dealer security required
Module information indicates immobilizer or VIN security.
Coverage and replacement notes
Documented years: 2025, 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Protocol / method
- OBD
- Security
- NATS 7 / AES-128
- Coding required
- Yes
- Cloning supported
- No
- Notes
- ECM programming requires VIN encoding and security seed/key exchange via our diagnostic software. Online server authentication required. Cloning not supported on 2018+ VIN-locked units.
Transmission Control Module (TCM) OBD coding supported
Module information indicates programming or coding through the OBD port.
Coverage and replacement notes
Documented years: 2025, 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Protocol / method
- OBD
- Security
- NATS 7 / AES-128
- Coding required
- Yes
- Cloning supported
- No
- Notes
- TCM requires shift-point calibration and VIN adaptation after replacement via our diagnostic software. Cloning not supported.
Body Control Module (BCM) OBD coding supported
Module information indicates programming or coding through the OBD port.
Coverage and replacement notes
Documented years: 2025, 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Protocol / method
- OBD
- Security
- NATS 7 / AES-128
- Coding required
- Yes
- Cloning supported
- No
- Notes
- BCM requires coding to vehicle VIN after replacement. Security gateway access required on 2018+ models. All comfort/convenience modules must be re-synced via our diagnostic software.
TCM / Transmission
TCU - CVT8 Continuously Variable Transmission Verify by VIN 31036
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2025, 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 31036
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Renesas SH72543
- Notes
- Requires CVT relearn procedure via CONSULT III+. NS-3 CVT fluid specification. VIN coding mandatory for proper shift mapping.
BCM / Body electronics
Body Control Module (BCM) Verify by VIN 2025 ~(VERIFY VIA CONSULT FOR MURANO 2025)
Documented for 2025 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2025
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- ~(VERIFY VIA CONSULT FOR MURANO 2025)
- Notes
- CONSULT-III Plus required for BCM programming and VIN registration after replacement. MURANO BCM controls lighting, door locks, windows, TPMS display, wipers, horn, and remote start logic. Program all option codes per VIN via CONSULT. Verify all body functions and NATS sync after replacement.
Intelligent Key ECU Verify by VIN 2025 ~(VERIFY VIA CONSULT FOR MURANO 2025)
Documented for 2025 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2025
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- ~(VERIFY VIA CONSULT FOR MURANO 2025)
- Notes
- CONSULT-III Plus + ASIST authorization required for Intelligent Key replacement. All registered keys are erased upon ECU replacement. Maximum 4 Intelligent Keys. Register all customer keys via CONSULT key registration procedure. Verify push-button start and all remote functions after programming.
Power Window Module / Door Modules Verify by VIN
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2025, 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Notes
- CONSULT body systems check after window regulator or motor replacement. Perform window learning/initialization sequence via CONSULT if auto-up/down function is lost.
Body Control Module (BCM) Verify by VIN 2026 ~(VERIFY VIA CONSULT FOR MURANO 2026)
Documented for 2026 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- ~(VERIFY VIA CONSULT FOR MURANO 2026)
- Notes
- CONSULT-III Plus required for BCM programming and VIN registration after replacement. MURANO BCM controls lighting, door locks, windows, TPMS display, wipers, horn, and remote start logic. Program all option codes per VIN via CONSULT. Verify all body functions and NATS sync after replacement.
Intelligent Key ECU Verify by VIN 2026 ~(VERIFY VIA CONSULT FOR MURANO 2026)
Documented for 2026 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- ~(VERIFY VIA CONSULT FOR MURANO 2026)
- Notes
- CONSULT-III Plus + ASIST authorization required for Intelligent Key replacement. All registered keys are erased upon ECU replacement. Maximum 4 Intelligent Keys. Register all customer keys via CONSULT key registration procedure. Verify push-button start and all remote functions after programming.
SRS / Airbag
SRS Control Unit Verify by VIN 985P19UA9A
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2025, 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 985P19UA9A
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
SRS Control Unit Verify by VIN 985R09UF8B
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2025, 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 985R09UF8B
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
SRS Control Unit Verify by VIN 985R09UF9A
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2025, 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 985R09UF9A
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
SRS Control Unit Verify by VIN 985105AA8A
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2025, 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 985105AA8A
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
SRS Control Unit Verify by VIN 985P09UA9A
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2025, 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 985P09UA9A
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
ABS / Brakes
ABS Actuator and Electric Unit (Control Unit) Verify by VIN
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2025, 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Notes
- Nissan ABS/VDC. CONSULT-III+ self-diagnosis + air bleeding work support.
Wheel Speed Sensor - Front (each) Verify by VIN
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2025, 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Notes
- Active sensor. DTC C1101/C1102 series.
Wheel Speed Sensor - Rear (each) Verify by VIN
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2025, 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Notes
- Active sensor.
Other modules
Instrument Panel Cluster (IPC) Verify by VIN 2025 24810-5AA1A
Documented for 2025 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2025
Donor must match part family 24810-5AA1A - requires cloning
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 24810-5AA1A
- Cloning supported
- Yes
- Notes
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Instrument Panel Cluster (IPC) Verify by VIN 2026 24810-9MU0A
Documented for 2026 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2026
Donor must match part family 24810-9MU0A - requires cloning
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 24810-9MU0A
- Cloning supported
- Yes
- Notes
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Instrument Panel Cluster (IPC) Verify by VIN 2026 24810-9MU1A
Documented for 2026 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2026
Donor must match part family 24810-9MU1A - requires cloning
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 24810-9MU1A
- Cloning supported
- Yes
- Notes
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Steering Angle Sensor (SAS) Verify by VIN
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2025, 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Coding required
- Yes
- Notes
- INTEGRATED (spiral cable 25554 family)
Connectivity / Accessories
12.3" NissanConnect touchscreen with dual-zone OTA Verify by VIN
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2025, 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Notes
- Programming required after replacement. Verify software version compatibility before install.
Remote Start Verify by VIN
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2025, 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Notes
- Factory remote start. BCM configuration required after replacement on equipped vehicles.
Reference information for 2025-2026. Coverage can vary by year and equipment. Confirm the VIN and full part number before ordering a replacement.
Vehicle overview
- Vehicle
- Nissan Murano
- Model years
- 2025-2026
- Generation
- 4th Gen Z53
- Platform
- Z53 (CMF-D)
Tools we use for this vehicle
Factory scan, coding, and calibration access
Nissan CONSULT-III Plus
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
ADAS scan, setup, and verification
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Bench cloning and chip-level recovery
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Tool requirements
Basic OBD2 scanner
View capabilities and limitations
Supported work
- Read codes on SRS systems (5 documented rows)
- Read codes on ECU systems (3 documented rows)
- Read codes on BCM systems (5 documented rows)
- Read codes on TCU / TCM systems (1 documented row)
- Read codes on ABS systems (3 documented rows)
- Read codes on IPC / SAS systems (4 documented rows)
- Read codes on Gateway systems (1 documented row)
- Read codes on Keys systems (1 documented row)
- Read codes on Immobilizer systems (1 documented row)
- Read codes on Accessory systems (2 documented rows)
Limitations
- ECU programming, coding, cloning, or security work (3 documented rows)
- Gateway programming, coding, cloning, or security work (1 documented row)
- Keys programming, coding, cloning, or security work (1 documented row)
- Immobilizer programming, coding, cloning, or security work (1 documented row)
Professional scan tool
View capabilities and limitations
Supported work
- ECU OBD coding support (2 documented rows)
- Keys OBD coding support (1 documented row)
Limitations
- ECU bench, clone, or dealer security rows (1 documented row)
- Gateway bench, clone, or dealer security rows (1 documented row)
- Immobilizer bench, clone, or dealer security rows (1 documented row)
Factory programming software (J2534)
View capabilities and limitations
Supported work
- Factory scan, coding, and calibration access: Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
Bench programmer
View capabilities and limitations
Supported work
- Immobilizer bench clone rows (1 documented row)
Dealer or specialist
View capabilities and limitations
Supported work
- ECU dealer security rows (1 documented row)
- Gateway dealer security rows (1 documented row)
Dealer security and specialist module work should be scoped by VIN before you buy parts or pay for programming.
Get a QuoteKnow this platform
This platform uses HS-CAN (500 kbps); Nissan CAN; OBD2 DLC Pin 6/14 with ISO 15765-4 CAN (500 kbps).
- CAN
- HS-CAN (500 kbps); Nissan CAN; OBD2 DLC Pin 6/14
- OBD
- ISO 15765-4 CAN (500 kbps)
OPENPILOT / COMMA.AI
Openpilot Compatibility
Not Supported
Not supported - not in openpilot tree
Not in openpilot support tree as of April 2026. Murano not ported.
Generation service summary for Nissan Murano 4th Gen Z53 (2025-2026)
Generation coverage
This page consolidates Nissan Murano service data for 2025-2026 across 2 model years; service information is available for 2 years.
Choose a yearADAS coverage
Merged ADAS coverage includes 14 system records, including Safety Shield 360 Forward Camera (Mobileye EyeQ4) (2025), Forward Radar (77GHz) - ACC / AEB (2025), Blind Spot Monitor Sensor - Left (BSM) (2025), and Blind Spot Monitor Sensor - Right (BSM) (2025). Year-marked systems apply only to the shown range.
View ADAS dataCalibration triggers
This generation has 5 merged calibration trigger records. Trigger applicability can vary by year - verify by VIN before setup.
View triggersProgrammable modules
The merged generation page indexes 24 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, IPC coverage. Part numbers are confirmed for the exact year/VIN.
View modulesCore Auto Logic capability
Core Auto Logic supports generation-level diagnostics, ADAS calibration, module programming, and security-access planning for the Nissan Murano 2025-2026 span, with exact-year validation before service. Mail-in module service is available nationwide.
Get a quoteDo I need calibration?
ECM Replacement 1
2025-2026
Yes
CONSULT immobilizer work support + throttle position relearn.
ABS/VDC Module Replacement 1
2025-2026
Yes
CONSULT ABS bleed + VDC sensor reset.
Windshield Replacement 1
2025-2026
Yes
Safety Shield 360 forward collision warning camera (windshield-mounted) requires recalibration via CONSULT-III+.
Front Bumper/Radar Service 1
2025-2026
Yes
Front radar module recalibration required after front bumper removal or radar replacement.
Rear Bumper/Radar Service 1
2025-2026
Yes
Rear cross-traffic radar recalibration after rear bumper work.
Year-by-year details
14 ADAS systems documented across the 2025-2026 generation. Rows that apply to only part of the generation carries a year badge.
Filter by year
ADAS CALIBRATION MATRIX
ADAS systems on this vehicle
Nissan Safety Shield 360 (2019+): Automatic Emergency Braking with Pedestrian Detection, Blind Spot Warning, Rear Cross Traffic Alert, High Beam Assist, Lane Departure Warning/Prevention; ProPilot Assist (2021+): Adaptive Cruise with Lane Centering
Scroll for part numbers and Details
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Safety Shield 360 Forward Camera (Mobileye EyeQ4) 2025 | Forward Camera | Camera | Static | YES | - | |
| Forward Radar (77GHz) - ACC / AEB 2025 | Front Radar | Radar | Static + Dynamic | YES | - | |
| Blind Spot Monitor Sensor - Left (BSM) 2025 | Side Radar | Radar | Static + Dynamic | YES | - | |
| Blind Spot Monitor Sensor - Right (BSM) 2025 | Side Radar | Radar | Static + Dynamic | YES | - | |
| Rear View Camera (RVC) 2025 | Rear Camera | Camera | Static | YES | - | |
| Intelligent Around View Monitor (AVM) - 360° Surround 2025 | Surround Camera | Camera | Static | YES | - | |
| Park Distance Control (PDC) - Ultrasonic Sensors 2025 | Parking Sensor | Ultrasonic | None | YES | - | |
| Safety Shield 360 Forward Camera (Mobileye EyeQ4) 2026 | Forward Camera | Camera | Static | YES | - | |
| Forward Radar (77GHz) - ACC / AEB 2026 | Front Radar | Radar | Static + Dynamic | YES | - | |
| Blind Spot Monitor Sensor - Left (BSM) 2026 | Side Radar | Radar | Static + Dynamic | YES | - | |
| Blind Spot Monitor Sensor - Right (BSM) 2026 | Side Radar | Radar | Static + Dynamic | YES | - | |
| Rear View Camera (RVC) 2026 | Rear Camera | Camera | Static | YES | - | |
| Intelligent Around View Monitor (AVM) - 360° Surround 2026 | Surround Camera | Camera | Static | YES | - | |
| Park Distance Control (PDC) - Ultrasonic Sensors 2026 | Parking Sensor | Ultrasonic | None | YES | - |
ADAS SYSTEM
YES Supported
Identification
- System type
- Module category
- Sensor location
Part Numbers
- OEM
- Alternative
Calibration & Triggers
- Calibration type
- Programming approach
- Requires PMI
- Trigger events
Technical Notes
- Chip / MCU
- Service notes
Need this calibrated?
Get a quote for ADAS calibration WHEN IS CALIBRATION REQUIRED?
Triggers for ADAS recalibration
ECM Replacement
CONSULT immobilizer work support + throttle position relearn.
ABS/VDC Module Replacement
CONSULT ABS bleed + VDC sensor reset.
Windshield Replacement
Safety Shield 360 forward collision warning camera (windshield-mounted) requires recalibration via CONSULT-III+.
Front Bumper/Radar Service
Front radar module recalibration required after front bumper removal or radar replacement.
Rear Bumper/Radar Service
Rear cross-traffic radar recalibration after rear bumper work.
3 gateway, immobilizer, and security items documented across the 2025-2026 generation.
Gateway / Security Modules
Central Gateway Module Dealer security required
Module information indicates immobilizer or VIN security.
Coverage and replacement notes
Documented years: 2025, 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Manufacturer
- NXP / Freescale
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- MPC5606BK
- Notes
- Compatibility label: X-TRAIL. BCM Notes: Read/Write
ARCHITECTURE & CONNECTIVITY
Architecture & Connectivity
- Body Construction
- High-strength steel unibody; aluminum hood
- OBD Protocol
- ISO 15765-4 CAN (500 kbps)
- CAN Architecture
- HS-CAN (500 kbps); Nissan CAN; OBD2 DLC Pin 6/14
- Infotainment
- 12.3" NissanConnect touchscreen with dual-zone OTA; wireless Apple CarPlay/Android Auto
- OTA Capable
- Partial
- ECU/TCM Unlocking
- Contact us
- ECU/TCM Flashing
- Available
Reviewed coverage: 2025-2026 - 2.5L dCi (YD25DDTi).
Confirm the exact engine, ECU, and any prerequisite access method before service.
Confirmation is limited to reviewed year/engine rows; other variants require confirmation.
WHAT WE RESOLVE
4th Gen Z53 (2025-2026) common module and ADAS issues
- ADAS calibration drift Watch for calibration needs after windshield, bumper, suspension, camera, or radar work. Documented systems include Safety Shield 360 Forward Camera (Mobileye EyeQ4) (2025), Forward Radar (77GHz) - ACC / AEB (2025), Blind Spot Monitor Sensor - Left (BSM) (2025), and Blind Spot Monitor Sensor - Right (BSM) (2025). Year-marked systems apply only to the shown range.
- SRS crash-data and warning light SRS service can involve SRS Control Unit. Part numbers and crash-data workflow are confirmed for the exact year/VIN.
- Replacement module setup ECU/PCM replacement programming, BCM configuration, TCU/TCM cloning, ABS/EBCM setup are represented in the merged generation data. Rows with year ranges do not apply to every model year; verify by VIN.
FREQUENTLY ASKED QUESTIONS
FAQ
Can you program Nissan Murano (2025-2026) modules?
Yes. Core Auto Logic supports generation-scoped module programming for the Nissan Murano (2025-2026). The merged generation data includes ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS coverage. Rows marked with a year range apply only to that part of the span; unmarked rows are present across the merged generation data.
Which modules are documented for Nissan Murano (2025-2026)?
The Nissan Murano (2025-2026) generation currently shows 17 core module records across ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS groups. SRS modules include SRS Control Unit. Part numbers and module variants must be confirmed for your exact year/VIN. Reference part number: 985P19UA9A - confirm for your exact year/VIN.
Does Nissan Murano (2025-2026) need ADAS calibration after glass or collision work?
The merged generation data documents 14 ADAS systems, including Safety Shield 360 Forward Camera (Mobileye EyeQ4) (2025), Forward Radar (77GHz) - ACC / AEB (2025), Blind Spot Monitor Sensor - Left (BSM) (2025), Blind Spot Monitor Sensor - Right (BSM) (2025), and Rear View Camera (RVC) (2025). Calibration triggers include ECM Replacement, ABS/VDC Module Replacement, Windshield Replacement, and Front Bumper/Radar Service. Procedure type is VIN-specific scan-tool procedure; verify exact requirements by VIN before setup.
Can you reset the airbag module on Nissan Murano (2025-2026)?
Yes. The generation data includes 5 SRS records, including SRS Control Unit. Bench reset, cloning, and replacement setup are handled after part-number review. Any SRS part number shown for this generation is planning data only - confirm for your exact year/VIN. Reference part number: 985P19UA9A - confirm for your exact year/VIN.
Do all Nissan Murano (2025-2026) years use the same parts?
No assumption should be made across the full span. The generation page merges rows across 2025-2026; any row that does not span all data-bearing years is printed with its year range or treated as varies by year - verify by VIN. Part numbers always require exact year/VIN confirmation before ordering, cloning, or programming.
How long does service take for Nissan Murano (2025-2026)?
Most programming, cloning, SRS, and calibration jobs are quoted after VIN, DTC, part number, and repair-scope review. Labor time varies by year - verify by VIN before scheduling. Mail-in module service is available nationwide. Exact service eligibility is confirmed from the year, VIN, module, and requested scope.
Is Nissan Murano (2025-2026) service mobile or mail-in?
Mobile service covers DFW on-vehicle diagnostics, post-repair coding, and supported module work. Mail-in module service is available nationwide. We confirm the active path for your exact year, VIN, module, and requested scope before service.
More Murano generations
3rd Gen Z52 2015-2024 4th Gen Z53 2025-2026 You are here
Finish the repair
Need help finishing this repair?
Get onsite help in Dallas-Fort Worth. Ask about same-day availability or a one-time remote session for eligible non-VSP work.
CONSULT III / IV Explore one-time factory coding and programming. We confirm the software and procedure for your vehicle. Module programming & recovery Replacing a module or dealing with a failed programming attempt? Send the part numbers and fault scan for review. Onsite tools & equipment Bring in a technician or ask about hourly, daily and weekly rentals where licensing and equipment availability allow.