Skip to main content
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
DFW Mobile Service
DFW Serving Dallas / Fort Worth
2015 Nissan Murano Supported Services

2015 Nissan Murano

ADAS calibration, module programming, and security relearns

S, SV, SL, Platinum trims. Z52 platform. 3.5L V6, Xtronic CVT, FWD or AWD.

Technical snapshot
  • Platform Nissan D-platform (3rd gen, 2015 redesign)
  • CAN Architecture HS-CAN (500 kbps); Nissan CAN; OBD2 DLC Pin 6/14
  • Security Nissan Intelligent Key (PEPS); rolling code transponder; CONSULT III Plus programmed

What do you need fixed?

Choose a service to start your quote.

SERVICE SNAPSHOT

Exact-year service summary for 2015 Nissan Murano

ADAS coverage

This 2015 Nissan Murano page documents 7 ADAS systems, including Safety Shield 360 Forward Camera (Mobileye EyeQ4), Forward Radar (77GHz) - ACC / AEB, Blind Spot Monitor Sensor - Left (BSM), and Blind Spot Monitor Sensor - Right (BSM).

View ADAS data

Calibration triggers

Documented calibration triggers include ECM Replacement, ABS/VDC Module Replacement, and Around View Monitor Camera Replacement. Use the ADAS tab for the full trigger list.

View triggers

Programmable modules

This page indexes 20 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and IPC coverage.

View modules

Gateway and security

This page includes 2 gateway, immobilizer, or key-security records for this 2015 Nissan Murano.

View security

Core Auto Logic capability

Core Auto Logic supports exact-year diagnostics, ADAS calibration, module programming, and security-access planning for the 2015 Nissan Murano using the documented systems and module data on this page.

Choose a section

VIN and build details determine exact service eligibility. A missing record does not mean we cannot help; ask about your vehicle.

Vehicle specifications & technical reference
OVERVIEW
Platform
Nissan D-platform (3rd gen, 2015 redesign)
Production
2010-present
Trim Levels
S, SV, SL, Platinum trims. Z52 platform. 3.5L V6, Xtronic CVT, FWD or AWD.
Drivetrain
FWD / AWD
CAN Speed
HS-CAN (500 kbps); Nissan CAN; OBD2 DLC Pin 6/14
EXACT-YEAR DIFFERENTIATORS

What changes on this exact year

Feature availability

Basic ADAS: Rear Cross Traffic Alert, Around View Monitor (on equipped trims) - Available; Platform: Nissan D-platform (3rd gen, 2015 redesign) - Confirmed

Driver-assist suite

Basic ADAS: Rear Cross Traffic Alert, Around View Monitor (on equipped trims); pre-Safety Shield 360

Infotainment context

8" NissanConnect touchscreen; Apple CarPlay/Android Auto (2019+)

Network and access

CAN: HS-CAN (500 kbps); Nissan CAN; OBD2 DLC Pin 6/14

TOOL ACCESS MATRIX

Tool access for this exact year

Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.

Factory scan, coding, and calibration access

Nissan CONSULT-III Plus

Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.

ADAS scan, setup, and verification

Autel, Launch Tech, Topdon

Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.

Bench cloning and chip-level recovery

Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog

Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.

Bench/chip-level only

Choose a section to view data

SUPPORTED SYSTEMS

What we service on this vehicle

Documented module coverage for the 2015 Nissan Murano. Counts reflect modules our techs have programmed or calibrated on this exact platform.

Need something not listed? Most undocumented modules can still be programmed.

Get a Quote
Feature availability 2

Basic ADAS: Rear Cross Traffic Alert, Around View Monitor (on equipped trims)

Available

Calibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.

Platform: Nissan D-platform (3rd gen, 2015 redesign)

Confirmed

Verify platform code matches when cross-referencing part numbers across model years.

WHAT WE RESOLVE

Common issues on this vehicle

Common Nissan Murano issues we resolve on this platform: Safety Shield 360 Forward Camera (Mobileye EyeQ4), Forward Radar (77GHz) - ACC / AEB, Blind Spot Monitor Sensor - Left (BSM), and Blind Spot Monitor Sensor - Right (BSM) recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - Nissan D-platform (3rd gen, 2015 redesign) platform uses HS-CAN (500 kbps); Nissan CAN; OBD2 DLC Pin 6/14.

ADAS CALIBRATION MATRIX

ADAS systems on this vehicle

Basic ADAS: Rear Cross Traffic Alert, Around View Monitor (on equipped trims); pre-Safety Shield 360

Scroll for part numbers and Details
SystemTypeCategoryCal. TypeSupportedPart #Actions
Safety Shield 360 Forward Camera (Mobileye EyeQ4)Forward CameraCameraStatic YES-
Forward Radar (77GHz) - ACC / AEBFront RadarRadarStatic + Dynamic YES-
Blind Spot Monitor Sensor - Left (BSM)Side RadarRadarStatic + Dynamic YES-
Blind Spot Monitor Sensor - Right (BSM)Side RadarRadarStatic + Dynamic YES-
Rear View Camera (RVC)Rear CameraCameraStatic YES-
Intelligent Around View Monitor (AVM) - 360° SurroundSurround CameraCameraStatic YES-
Park Distance Control (PDC) - Ultrasonic SensorsParking SensorUltrasonicNone YES-
WHEN IS CALIBRATION REQUIRED?

Triggers for ADAS recalibration

ECM Replacement

CONSULT immobilizer work support + throttle position relearn.

ABS/VDC Module Replacement

CONSULT ABS bleed + VDC sensor reset.

Around View Monitor Camera Replacement

If equipped: Around View Monitor (AVM) surround cameras require recalibration after replacement via CONSULT-III+.

SRS - Airbag Modules

SRS Control Unit 876505AC9A
Part number
876505AC9A
Location
Under center console
Manufacturer
Continental
Notes
Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
SRS Control Unit 876005AB6A
Part number
876005AB6A
Location
Under center console
Manufacturer
Continental
Notes
Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.

ECU - Engine Computer

Engine Control Module (ECM)
Protocol / method
OBD
Security
NATS 7 / AES-128
Coding required
Yes
Cloning supported
Yes
Notes
ECM programming requires VIN encoding and security seed/key exchange via our diagnostic software. Cloning supported on pre-2018 units.
Transmission Control Module (TCM)
Protocol / method
OBD
Security
NATS 7 / AES-128
Coding required
Yes
Cloning supported
Yes
Notes
TCM requires shift-point calibration and VIN adaptation after replacement via our diagnostic software. Cloning supported on pre-2018 automatic units.
Body Control Module (BCM)
Protocol / method
OBD
Security
NATS 7 / AES-128
Coding required
Yes
Cloning supported
Yes
Notes
BCM requires coding to vehicle VIN after replacement. Door/window and lighting modules re-sync recommended after BCM swap.

BCM - Body Electronics

Body Control Module (BCM) ~(VERIFY VIA CONSULT FOR MURANO 2015)
Part number
~(VERIFY VIA CONSULT FOR MURANO 2015)
Notes
CONSULT-III Plus required for BCM programming and VIN registration after replacement. MURANO BCM controls lighting, door locks, windows, TPMS display, wipers, horn, and remote start logic. Program all option codes per VIN via CONSULT. Verify all body functions and NATS sync after replacement.
Intelligent Key ECU ~(VERIFY VIA CONSULT FOR MURANO 2015)
Part number
~(VERIFY VIA CONSULT FOR MURANO 2015)
Notes
CONSULT-III Plus + ASIST authorization required for Intelligent Key replacement. All registered keys are erased upon ECU replacement. Maximum 4 Intelligent Keys. Register all customer keys via CONSULT key registration procedure. Verify push-button start and all remote functions after programming.
Power Window Module / Door Modules
Notes
CONSULT body systems check after window regulator or motor replacement. Perform window learning/initialization sequence via CONSULT if auto-up/down function is lost.
Body control module (BCM) - 2015 Murano restricted bulletin service unit 284B2-9UE0A
Part number
284B2-9UE0A
Notes
Historical Nissan North America physical service reference: NTB17-081A, March 17, 2021, lists body control module 284B2-9UE0A, quantity 1, for 2015 Murano (Z52). All VINs and production dates within this listed model-year; the diagnostic gate still applies. Applies only when intermittent theft alarm activation (horn and flashing lights) occurs during Intelligent Key lock, unlock or trunk operation, door or trunk handle request-switch operation, or opening a door or trunk while unlocked, AND diagnostic alarm history identifies BATTERY as the last alarm trigger: BATTERY On is required; BATTERY Off excludes this bulletin. This is a complete physical BCM service unit, not software, a calibration number or an established ECU family. This is not a current replacement selection; vehicle VIN, build, equipment and emissions require OEM catalog validation before ordering. Current ordering, supersession, interchange, precise engine/equipment allocation, cloning, immobilizer and programming/repair capability remain unverified. No other year, model or variant is asserted. Existing records are retained without retrospective validation.

TCM - Transmission Computer

TCU - CVT8 Continuously Variable Transmission 31036-5AA0
Part number
31036-5AA0
Protocol / method
J2534
Coding required
Yes
Cloning supported
No
Chip / MCU
Renesas SH7058
Notes
CVT relearn via CONSULT III+, NS-3 CVT fluid spec, VIN coding mandatory

ABS - Brake Modules

ABS Actuator and Electric Unit (Control Unit)
Notes
Nissan ABS/VDC. CONSULT-III+ self-diagnosis + air bleeding work support.
Wheel Speed Sensor - Front (each)
Notes
Active sensor. DTC C1101/C1102 series.
Wheel Speed Sensor - Rear (each)
Notes
Active sensor.
ABS actuator assembly - historical recalled hardware identification 47660-9UD6D
Part number
47660-9UD6D
Notes
Parts reference: 2015 Nissan Murano, AWD, excluding Hybrid, built August 22, 2014 through May 31, 2018; historical recalled ABS actuator assembly 47660-9UD6D, identified in Nissan recall 19V-807 (November 22, 2019 amended filing), page 2. This is an involved assembly identifier, not a current remedy replacement or a bare ABS electronic controller. Individual VIN campaign involvement must be checked through Nissan. Use the current OEM recall remedy and VIN-specific catalog for replacement selection. No current orderability, supersession, universal interchange or repair capability is established. No other model year, drivetrain or build interval is established by this page entry.
ABS actuator assembly - historical recalled hardware identification 47660-9UD6C
Part number
47660-9UD6C
Notes
Parts reference: 2015 Nissan Murano, FWD, excluding Hybrid, built August 22, 2014 through May 31, 2018; historical recalled ABS actuator assembly 47660-9UD6C, identified in Nissan recall 19V-807 (November 22, 2019 amended filing), page 2. This is an involved assembly identifier, not a current remedy replacement or a bare ABS electronic controller. Individual VIN campaign involvement must be checked through Nissan. Use the current OEM recall remedy and VIN-specific catalog for replacement selection. No current orderability, supersession, universal interchange or repair capability is established. No other model year, drivetrain or build interval is established by this page entry.

Instrument Cluster & Steering Angle Modules

Instrument Panel Cluster (IPC) 24810-5AA0A
Part number
24810-5AA0A
Cloning supported
Yes
Notes
IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Steering Angle Sensor (SAS)
Coding required
Yes
Notes
INTEGRATED (clock spring / steering column module
Steering Angle Sensor (SAS)
Coding required
Yes
Notes
cross-year extension)

Connectivity & Accessories

8" NissanConnect touchscreen
Notes
Programming required after replacement. Verify software version compatibility before install.
Remote Start
Notes
Factory remote start. BCM configuration required after replacement on equipped vehicles.
ARCHITECTURE & CONNECTIVITY

Architecture & Connectivity

Body Construction
High-strength steel unibody; aluminum hood
OBD Protocol
ISO 15765-4 CAN (500 kbps)
CAN Architecture
HS-CAN (500 kbps); Nissan CAN; OBD2 DLC Pin 6/14
Infotainment
8" NissanConnect touchscreen; Apple CarPlay/Android Auto (2019+)
OTA Capable
No
ECU/TCM Unlocking
Contact us
ECU/TCM Flashing
Confirmed
Reviewed coverage: 2015 - 2.5L dCi (YD25DDTi).
Confirm the exact engine, ECU, and any prerequisite access method before service.
FREQUENTLY ASKED QUESTIONS

FAQ

How much does ADAS calibration cost for a 2015 Nissan Murano?

ADAS calibration pricing for a 2015 Nissan Murano depends on which of its 7 documented systems need work after a repair. This vehicle is documented with Safety Shield 360 Forward Camera (Mobileye EyeQ4), Forward Radar (77GHz) - ACC / AEB, Blind Spot Monitor Sensor - Left (BSM), Blind Spot Monitor Sensor - Right (BSM), and Rear View Camera (RVC). We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.

Can you reset the airbag light on a 2015 Nissan Murano?

Yes. The 2015 Nissan Murano uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: 876505AC9A. Mobile diagnosis and programming are available in DFW, and mail-in module service is available nationwide. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.

What is needed after replacing the windshield on a 2015 Nissan Murano?

After windshield replacement on a 2015 Nissan Murano, Safety Shield 360 Forward Camera (Mobileye EyeQ4), Forward Radar (77GHz) - ACC / AEB, and Rear View Camera (RVC) rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in module service is available nationwide for eligible module work.

How long does a 2015 Nissan Murano module service take?

Most 2015 Nissan Murano onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 19 programmable modules documented in our database (3 ECU, 4 BCM, 1 TCU, 5 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module service is available nationwide.

Do you cover the 2015 Nissan Murano on-site, or is this mail-in only?

We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, post-repair recoding, and supported module work). Mail-in module service is available nationwide. Quote the work and we will confirm the active service path for the 2015 Nissan Murano. Do not ship a module unless support confirms next steps.

What kind of warranty do you offer on 2015 Nissan Murano programming?

Every programming, cloning, and calibration job on the 2015 Nissan Murano is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.

Which modules on a 2015 Nissan Murano can you actually service?

We program, clone, repair, or replace the full programmable-module stack on a 2015 Nissan Murano. For this vehicle our database documents:

  • 3 engine control (ECU/PCM)
  • 1 transmission control (TCU/TCM)
  • 4 body control (BCM and related)
  • 5 ABS / brake control (EBCM)
  • 1 immobilizer / security
  • 1 key & fob
  • 1 instrument cluster (IPC)
  • 2 steering angle sensor (SAS)
  • 7 ADAS module

Send the VIN and the operations performed and we will confirm support and pricing.

Additional Module Part Numbers

Additional OEM-sourced part numbers for the 2015 Nissan Murano covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.

ADAS Module Part Numbers
28438-5AA0A
ECU / PCM Part Numbers
23710-5AA0A, 23710-5AA1A
BCM / Body Module Part Numbers
~(VERIFY VIA CONSULT FOR MURANO 2015), 284B2-9UE0A
TCU / TCM Part Numbers
31036-5AA0
SRS / Airbag Module Part Numbers
876505AC9A, 876005AB6A
ABS / EBCM Part Numbers
47660-5AA0A, 47660-9UD6D, 47660-9UD6C
Instrument Cluster (IPC) Part Numbers
24810-5AA0A
Transmission Control Module (TCM) Part Numbers
31036-5AA0

Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.

Different trim or build?

Send your VIN and we'll confirm exact module support and pricing in the quote response.

Hit a security wall? We've got the keys.

1-year unlimited warranty on every flash and calibration.

(945) 382-4065 Get a Quote

Matching catalog references

Other vehicles with matching part references

These pages list a matching part reference in the same module category. This does not confirm interchangeability. Verify the complete part number, suffix, VIN and build before selecting a replacement.

Finish the repair

Need help finishing this repair?

Factory diagnostic software is available. We confirm the appropriate software and supported procedure for your vehicle.

Get onsite help in Dallas-Fort Worth. Ask about same-day availability or a one-time remote session for eligible work.