Choose a make, model and year, or start with a VIN.
ADAS calibration, module programming, and security relearns
S, SV, SL, Platinum trims. Z52 platform. 3.5L V6, Xtronic CVT, FWD or AWD.
Choose a service to start your quote.
Expert ADAS calibration, module programming, and diagnostic recovery for the 2018 Nissan Murano. On this vehicle we cover documented systems include Safety Shield 360 Forward Camera (Mobileye EyeQ4), Forward Radar (77GHz) - ACC / AEB, and Blind Spot Monitor Sensor - Left (BSM), this Nissan D-platform (3rd gen, 2015 redesign) platform vehicle, Nissan IMMU Gen 3; BCM rolling code immobilizer support. Mobile across the DFW Metroplex; mail-in module service is available nationwide.
This 2018 Nissan Murano page documents 7 ADAS systems, including Safety Shield 360 Forward Camera (Mobileye EyeQ4), Forward Radar (77GHz) - ACC / AEB, Blind Spot Monitor Sensor - Left (BSM), and Blind Spot Monitor Sensor - Right (BSM).
View ADAS dataDocumented calibration triggers include ECM Replacement, ABS/VDC Module Replacement, and Around View Monitor Camera Replacement. Use the ADAS tab for the full trigger list.
View triggersThis page indexes 17 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and IPC coverage.
View modulesThis page includes 3 gateway, immobilizer, or key-security records for this 2018 Nissan Murano.
View securityCore Auto Logic supports exact-year diagnostics, ADAS calibration, module programming, and security-access planning for the 2018 Nissan Murano using the documented systems and module data on this page.
Choose a sectionBasic ADAS: Rear Cross Traffic Alert, Around View Monitor (on equipped trims) - Available; Platform: Nissan D-platform (3rd gen, 2015 redesign) - Confirmed
Basic ADAS: Rear Cross Traffic Alert, Around View Monitor (on equipped trims); pre-Safety Shield 360
8" NissanConnect touchscreen; Apple CarPlay/Android Auto (2019+)
CAN: HS-CAN (500 kbps); Nissan CAN; OBD2 DLC Pin 6/14
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
Nissan CONSULT-III Plus
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Choose a section to view data
Documented module coverage for the 2018 Nissan Murano. Counts reflect modules our techs have programmed or calibrated on this exact platform.
Forward camera, radar, surround-view and lane-keep recalibration after windshield, suspension or fascia work.
Open ADAS tabPowertrain reprogramming, calibration updates, replacement ECU configuration and security access.
Open Modules tabBody control module, gateway and accessory programming. Includes feature-bit reconfiguration.
Open Modules tabSecure gateway module identification, bypass workflow and security-access planning before programming.
Open Security tabTransmission control module reprogramming, adaptive learning reset and replacement TCM clone.
Open Modules tabCrash-data clear, hard-code reset and replacement airbag module configuration.
Open Modules tabABS / EBCM bleed support, replacement module coding and yaw-rate sensor calibration.
Open Modules tabInstrument cluster cloning, steering angle sensor calibration and other supporting modules.
Open Modules tabInfotainment radio, surround view, remote start, trailer brake controller and other equipped systems.
Open Modules tabService events that require ADAS recalibration on this vehicle. Tap to see what triggers what.
Open ADAS tabNeed something not listed? Most undocumented modules can still be programmed.
Get a QuoteCalibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.
Verify platform code matches when cross-referencing part numbers across model years.
Common Nissan Murano issues we resolve on this platform: Safety Shield 360 Forward Camera (Mobileye EyeQ4), Forward Radar (77GHz) - ACC / AEB, Blind Spot Monitor Sensor - Left (BSM), and Blind Spot Monitor Sensor - Right (BSM) recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - Nissan D-platform (3rd gen, 2015 redesign) platform uses HS-CAN (500 kbps); Nissan CAN; OBD2 DLC Pin 6/14.
Basic ADAS: Rear Cross Traffic Alert, Around View Monitor (on equipped trims); pre-Safety Shield 360
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Safety Shield 360 Forward Camera (Mobileye EyeQ4) | Forward Camera | Camera | Static | YES | - | |
| Forward Radar (77GHz) - ACC / AEB | Front Radar | Radar | Static + Dynamic | YES | - | |
| Blind Spot Monitor Sensor - Left (BSM) | Side Radar | Radar | Static + Dynamic | YES | - | |
| Blind Spot Monitor Sensor - Right (BSM) | Side Radar | Radar | Static + Dynamic | YES | - | |
| Rear View Camera (RVC) | Rear Camera | Camera | Static | YES | - | |
| Intelligent Around View Monitor (AVM) - 360° Surround | Surround Camera | Camera | Static | YES | - | |
| Park Distance Control (PDC) - Ultrasonic Sensors | Parking Sensor | Ultrasonic | None | YES | - |
ADAS SYSTEM
Need this calibrated?
Get a quote for ADAS calibrationCONSULT immobilizer work support + throttle position relearn.
CONSULT ABS bleed + VDC sensor reset.
If equipped: Around View Monitor (AVM) surround cameras require recalibration after replacement via CONSULT-III+.
ADAS calibration pricing for a 2018 Nissan Murano depends on which of its 7 documented systems need work after a repair. This vehicle is documented with Safety Shield 360 Forward Camera (Mobileye EyeQ4), Forward Radar (77GHz) - ACC / AEB, Blind Spot Monitor Sensor - Left (BSM), Blind Spot Monitor Sensor - Right (BSM), and Rear View Camera (RVC). We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.
Yes. The 2018 Nissan Murano uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: 876505AC9A. Mobile diagnosis and programming are available in DFW, and mail-in module service is available nationwide. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.
After windshield replacement on a 2018 Nissan Murano, Safety Shield 360 Forward Camera (Mobileye EyeQ4), Forward Radar (77GHz) - ACC / AEB, and Rear View Camera (RVC) rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in module service is available nationwide for eligible module work.
Most 2018 Nissan Murano onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 17 programmable modules documented in our database (3 ECU, 3 BCM, 1 TCU, 3 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module service is available nationwide.
We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, post-repair recoding, and supported module work). Mail-in module service is available nationwide. Quote the work and we will confirm the active service path for the 2018 Nissan Murano. Do not ship a module unless support confirms next steps.
Every programming, cloning, and calibration job on the 2018 Nissan Murano is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
We program, clone, repair, or replace the full programmable-module stack on a 2018 Nissan Murano. For this vehicle our database documents:
Send the VIN and the operations performed and we will confirm support and pricing.
Additional OEM-sourced part numbers for the 2018 Nissan Murano covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.
Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.
Send your VIN and we'll confirm exact module support and pricing in the quote response.
1-year unlimited warranty on every flash and calibration.
Shared module fitment
These vehicles use one or more of the same replacement modules indexed for this vehicle.
Get onsite help in Dallas-Fort Worth. Ask about same-day availability or a one-time remote session for eligible non-VSP work.