3,200+ Vehicles Supported

1-Year Unlimited Guarantee

Same-Day Mobile Service

DFW Serving Dallas / Fort Worth

2007-2018 Mercedes-Benz Sprinter Generation Guide

Mercedes-Benz Sprinter NCV3 (2007-2018) ADAS Calibration & Module Programming

Covers model years 2007-2018 - one service guide for the whole generation.

Full ADAS calibration, module programming, and key security work for every Mercedes-Benz Sprinter built on this platform. Same-day mobile service across the Dallas/Fort Worth metroplex; mail-in accepted nationwide.

Platform W907
CAN Architecture MB CAN-C (powertrain), CAN-B (body/VEM), CAN-B2 (MBUX/telematics if equipped)
Security MB EIS + ISM + ECM triad - dealer network SCN authorization; fleet key management via XENTRY

Get a Quote See Supported Modules

The ADAS, module, and security rows below are consolidated across the full 2007-2018 generation. A year badge marks rows that apply only to part of the span; rows without a badge apply to every year. Year-specific differences are summarized under “What changes across 2007-2018”.

OVERVIEW

Expert ADAS calibration, module programming, and diagnostic recovery for the 2018 Mercedes Benz Sprinter. On this vehicle we cover documented systems include Forward Camera (Monocular) - MFC / Distronic Steering Assist, Forward Radar (77GHz) - Distronic Plus / AEB, and Active Lane Keep Assist / LDW (LKA/LDW), this W907 platform vehicle, EIS/EZS immobilizer support. Mobile across the DFW Metroplex, mail-in nationwide for module-bench work.

Platform

W907

Production

2007-present

Trim Levels

Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.

Drivetrain

RWD / AWD

Engine

CAN Speed

MB CAN-C (powertrain), CAN-B (body/VEM), CAN-B2 (MBUX/telematics if equipped)

Feature availability 4

Immobilizer: FBS3

Standard

Key programming requires manufacturer-level tool access. Add key supported.

Platform: NCV3 / W906 (2nd Gen, 2006-2013)

Confirmed

Verify platform code matches when cross-referencing part numbers across model years.

Platform: NCV3/W906 (2nd Gen, 2006-2018)

Confirmed

Verify platform code matches when cross-referencing part numbers across model years.

Driver Assistance Package (optional)

Standard

Calibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.

TOOL ACCESS MATRIX

Tool access for this exact year

Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.

Factory scan, coding, and calibration access

Mercedes XENTRY Diagnosis / Mercedes DAS

Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.

OEM subscription required

Make-level OEM tool map plus exact-year gateway and ADAS fields.

ADAS scan, setup, and verification

Autel, Launch Tech, Topdon

Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.

Tool subscription required

Service-level scanner-vendor source packet plus exact-year ADAS records.

Bench cloning and chip-level recovery

Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog

Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.

Bench/chip-level only

Bench programmer source packet plus exact-year module/security records.

PLATFORM

Know this platform

This platform uses MB CAN-C (powertrain), CAN-B (body/VEM), CAN-B2 (MBUX/telematics if equipped) with ISO 15765-4 CAN / MB XENTRY proprietary extensions.

CAN: MB CAN-C (powertrain), CAN-B (body/VEM), CAN-B2 (MBUX/telematics if equipped)
OBD: ISO 15765-4 CAN / MB XENTRY proprietary extensions

can_architecture obd_protocol

GENERATION SERVICE SNAPSHOT

Generation service summary for Mercedes-Benz Sprinter NCV3 (2007-2018)

Generation coverage

This page consolidates Mercedes-Benz Sprinter service data for 2007-2018 across 12 model years; 12 years have merged CCT data.

Choose a year

ADAS coverage

Merged ADAS coverage includes 17 system records, including No Factory ADAS Systems (2007), Adaptive Cruise Control Sensor (2008-2009), Rear View Camera (2009), and Rear View Camera (2010-2014). Year-marked systems apply only to the shown range.

View ADAS data

Calibration triggers

This generation has 15 merged calibration trigger records. Trigger applicability can vary by year - verify by VIN before setup.

View triggers

Programmable modules

The merged generation page indexes 72 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, IPC coverage. Part numbers are confirmed for the exact year/VIN.

View modules

Gateway and security

Gateway, immobilizer, and key-security coverage includes 15 merged records. Security procedures vary by year - verify by VIN.

View security

Core Auto Logic capability

Core Auto Logic supports generation-level diagnostics, ADAS calibration, module programming, security-access planning, and mail-in bench work for the Mercedes-Benz Sprinter 2007-2018 span, with exact-year validation before service.

Get a quote

CALIBRATION

Do I need calibration?

ECM/ME Replacement 1

2007-2014

Yes

XENTRY SCN coding mandatory. VIN tie.

ABS/ESP Module Replacement 1

2007-2014

Yes

XENTRY variant coding + ESP reset function.

Front Bumper Repair or Replacement 1

2010-2014

Yes

Forward radar angular alignment required after front bumper R&R. Use XENTRY.

Forward Radar Replacement 1

2010-2018

Yes

Radar module replacement requires alignment/calibration using XENTRY.

Any Front-End Collision 1

2010-2014

Yes

Inspect and recalibrate forward radar after any front-end collision using XENTRY.

Windshield Replacement (LKA equipped) 2

Front Camera

2015-2018

required

XENTRY static calibration with W907-specific MB target board. MB-approved glass. Non-LKA vehicles: no calibration required.

Lane Keeping Assist

2015-2018

required

XENTRY static calibration with W907-specific MB target board. MB-approved glass. Non-LKA vehicles: no calibration required.

Front Bumper Repair (ABA equipped) 2

Front Radar

2015-2018

required

Radar static alignment via XENTRY. Curb weight, level surface. Inspect bracket. Verify ABA option code.

ABA with pedestrian/cyclist detection

2015-2018

required

Radar static alignment via XENTRY. Curb weight, level surface. Inspect bracket. Verify ABA option code.

Rear Panel or Door Repair (Camera equipped) 1

Rear View Camera

2015-2018

required

Rear camera guideline re-calibration via XENTRY. Camera location varies by body style.

Any Collision 3

ACU

2015-2018

required

Full XENTRY scan mandatory. ACU replace-only. Verify cargo vs passenger airbag config. ICE W907 only - eSprinter is a separate platform.

camera/radar if equipped

2015-2018

required

Full XENTRY scan mandatory. ACU replace-only. Verify cargo vs passenger airbag config. ICE W907 only - eSprinter is a separate platform.

deployed airbag circuits

2015-2018

required

Full XENTRY scan mandatory. ACU replace-only. Verify cargo vs passenger airbag config. ICE W907 only - eSprinter is a separate platform.

Diesel Emission Service (OM654 / OM642) 4

ECM

2015-2018

required

XENTRY required for DPF forced regen, AdBlue level reset, SCR dosing adaptation, EGR adaptation. Any diesel emission component replacement requires ECM adaptation reset.

DPF

2015-2018

required

XENTRY required for DPF forced regen, AdBlue level reset, SCR dosing adaptation, EGR adaptation. Any diesel emission component replacement requires ECM adaptation reset.

SCR/AdBlue

2015-2018

required

XENTRY required for DPF forced regen, AdBlue level reset, SCR dosing adaptation, EGR adaptation. Any diesel emission component replacement requires ECM adaptation reset.

EGR

2015-2018

required

XENTRY required for DPF forced regen, AdBlue level reset, SCR dosing adaptation, EGR adaptation. Any diesel emission component replacement requires ECM adaptation reset.

Any Module Replacement 9

VEM

2015-2018

required

SCN online coding via XENTRY for all modules. MB server authorization mandatory. EIS triggers EIS/ISM/ECM synchronization. VEM requires VIN-specific body type configuration. Fleet telematics re-pairing required after telematics module replacement.

FSAM

2015-2018

required

EIS

2015-2018

required

ISM

2015-2018

required

ECM

2015-2018

required

TCM

2015-2018

required

ACU

2015-2018

required

Telematics

2015-2018

required

PTO

2015-2018

required

Forward Camera Replacement 1

2018

Yes

Camera module replacement requires full recalibration using XENTRY.

Rear Bumper Repair or Replacement 1

2018

Yes

BSD radar alignment required after rear bumper R&R. Use XENTRY.

BSM Sensor Replacement 1

2018

Yes

Blind spot monitoring sensor replacement requires calibration using XENTRY.

Mirror Replacement 1

2018

Conditional

If BSD sensor is mirror-integrated, recalibration required. Verify sensor location; use XENTRY if applicable.

MODEL YEARS

Year-by-year details

Year	VIN split	Trim notes
2007
2008
2009	VIN pos 4-9 identifies model/engine. Mercedes WMI: W1K, W1N, WDD, WDC. Position 4-6 = model code (e.g., 205 = C-Class, 213 = E-Class). Position 10 = model year code.	Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
2010	VIN pos 4-9 identifies model/engine. Mercedes WMI: W1K, W1N, WDD, WDC. Position 4-6 = model code (e.g., 205 = C-Class, 213 = E-Class). Position 10 = model year code.	Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
2011	VIN pos 4-9 identifies model/engine. Mercedes WMI: W1K, W1N, WDD, WDC. Position 4-6 = model code (e.g., 205 = C-Class, 213 = E-Class). Position 10 = model year code.	Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
2012	VIN pos 4-9 identifies model/engine. Mercedes WMI: W1K, W1N, WDD, WDC. Position 4-6 = model code (e.g., 205 = C-Class, 213 = E-Class). Position 10 = model year code.	Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
2013	VIN pos 4-9 identifies model/engine. Mercedes WMI: W1K, W1N, WDD, WDC. Position 4-6 = model code (e.g., 205 = C-Class, 213 = E-Class). Position 10 = model year code.	Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
2014	VIN pos 4-9 identifies model/engine. Mercedes WMI: W1K, W1N, WDD, WDC. Position 4-6 = model code (e.g., 205 = C-Class, 213 = E-Class). Position 10 = model year code.	Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
2015	VIN pos 4-9 identifies model/engine. Mercedes WMI: W1K, W1N, WDD, WDC. Position 4-6 = model code (e.g., 205 = C-Class, 213 = E-Class). Position 10 = model year code.	Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
2016	VIN pos 4-9 identifies model/engine. Mercedes WMI: W1K, W1N, WDD, WDC. Position 4-6 = model code (e.g., 205 = C-Class, 213 = E-Class). Position 10 = model year code.	Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
2017	VIN pos 4-9 identifies model/engine. Mercedes WMI: W1K, W1N, WDD, WDC. Position 4-6 = model code (e.g., 205 = C-Class, 213 = E-Class). Position 10 = model year code.	Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
2018	VIN pos 4-9 identifies model/engine. Mercedes WMI: W1K, W1N, WDD, WDC. Position 4-6 = model code (e.g., 205 = C-Class, 213 = E-Class). Position 10 = model year code.	Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.

17 ADAS systems documented across 2007-2018. Rows that apply to only part of the generation carry a year badge.

Filter by year

ADAS CALIBRATION MATRIX

ADAS systems on this vehicle

Driver Assistance Package (optional) - ABA with pedestrian/cyclist detection, Lane Keeping, Blind Spot, Rear Camera; Attention Assist standard

Scroll for part numbers and Details

System	Type	Category	Cal. Type	Supported	Part #
No Factory ADAS Systems 2007	None	None	None	No	-
Adaptive Cruise Control Sensor 2008-2009	Radar	ADAS	Static	Conditional	-
Rear View Camera 2009	Rear Camera	Camera	None	Conditional	-
Rear View Camera 2010-2014	Rear Camera	Camera	None	YES	-
Forward Collision Warning / AEB 2010-2014	Camera	ADAS	Static	Conditional	-
Adaptive Cruise Control Radar 2010-2014	Radar	ADAS	Static	Conditional	-
Attention Assist (Drowsiness Detection) 2015	Internal Sensor	Other	None	YES	-
Forward Radar (77GHz) - Distronic ACC (optional) 2015-2017	Front Radar	Radar	Static	YES	000-900-26-00
Rear View Camera 2015-2017	Rear Camera	Camera	Static	YES	-
Attention Assist (Drowsiness Detection) 2016	Internal Sensor	Other	None	YES	-
Attention Assist (Drowsiness Detection) 2017	Internal Sensor	Other	None	YES	-
Forward Camera (Monocular) - MFC / Distronic Steering Assist 2018	Forward Camera	Camera	Static	YES	000-900-97-12
Forward Radar (77GHz) - Distronic Plus / AEB 2018	Front Radar	Radar	Static	YES	000-900-26-00
Active Lane Keep Assist / LDW (LKA/LDW) 2018	Forward Camera	Camera	Static	YES	000-900-97-12
Blind Spot Assist / Rear Cross-Traffic Alert 2018	Side Radar	Radar	Static + Dynamic	YES	000-900-36-00 (L), 000-900-37-00 (R)
Active Parking Assist / Parktronic (PDC) 2018	Ultrasonic	Ultrasonic	None	YES	-
Rear View Camera 2018	Rear Camera	Camera	Static	YES	-

WHEN IS CALIBRATION REQUIRED?

Triggers for ADAS recalibration

ECM/ME Replacement 2007-2014

XENTRY SCN coding mandatory. VIN tie.

ABS/ESP Module Replacement 2007-2014

XENTRY variant coding + ESP reset function.

Front Bumper Repair or Replacement 2010-2014

Forward radar angular alignment required after front bumper R&R. Use XENTRY.

Forward Radar Replacement 2010-2018

Radar module replacement requires alignment/calibration using XENTRY.

Any Front-End Collision 2010-2014

Inspect and recalibrate forward radar after any front-end collision using XENTRY.

Windshield Replacement (LKA equipped) 2015-2018 Affected: Front Camera, Lane Keeping Assist

XENTRY static calibration with W907-specific MB target board. MB-approved glass. Non-LKA vehicles: no calibration required.

Front Bumper Repair (ABA equipped) 2015-2018 Affected: Front Radar, ABA with pedestrian/cyclist detection

Radar static alignment via XENTRY. Curb weight, level surface. Inspect bracket. Verify ABA option code.

Rear Panel or Door Repair (Camera equipped) 2015-2018 Affected: Rear View Camera

Rear camera guideline re-calibration via XENTRY. Camera location varies by body style.

Any Collision 2015-2018 Affected: ACU, camera/radar if equipped, deployed airbag circuits

Full XENTRY scan mandatory. ACU replace-only. Verify cargo vs passenger airbag config. ICE W907 only - eSprinter is a separate platform.

Diesel Emission Service (OM654 / OM642) 2015-2018 Affected: ECM, DPF, SCR/AdBlue, EGR

XENTRY required for DPF forced regen, AdBlue level reset, SCR dosing adaptation, EGR adaptation. Any diesel emission component replacement requires ECM adaptation reset.

Any Module Replacement 2015-2018 Affected: VEM, FSAM, EIS, ISM, ECM, TCM, ACU, Telematics, PTO

Forward Camera Replacement 2018

Camera module replacement requires full recalibration using XENTRY.

Rear Bumper Repair or Replacement 2018

BSD radar alignment required after rear bumper R&R. Use XENTRY.

BSM Sensor Replacement 2018

Blind spot monitoring sensor replacement requires calibration using XENTRY.

Mirror Replacement 2018

If BSD sensor is mirror-integrated, recalibration required. Verify sensor location; use XENTRY if applicable.

MODULE COVERAGE

Modules we program on this generation

72 documented Mercedes-Benz Sprinter modules across 2007-2018. Open a group for part numbers, programming protocol, security notes, and clone support.

SRS MODULES

SRS Modules

Airbag Control Module (ACM) x2

Part 1 Verify by VIN 2007 Bench

_years covers only 2007 for this generation

Used/donor module guide

Compatible donor years: 2007

Always match the full part number before buying a used module.

PROTOCOL: Bench
CLONE: true
NOTES: After any airbag deployment, the ACM stores crash data (hard codes). The module must be reset or replaced before the SRS system will function. Our equipment supports hard code clearing on most makes and models without dealer involvement.

Part 2 Verify by VIN 2008 OBD

_years covers only 2008 for this generation

Used/donor module guide

Compatible donor years: 2008

Always match the full part number before buying a used module.

PROTOCOL: OBD
CLONE: true
NOTES: After any airbag deployment, the ACM stores crash data (hard codes). The module must be reset or replaced before the SRS system will function. Our equipment supports hard code clearing on most makes and models without dealer involvement.

Driver Airbag Module Verify by VIN 2007-2008 x1

_years covers only 2007-2008 for this generation

Used/donor module guide

Compatible donor years: 2007, 2008

Always match the full part number before buying a used module.

PROTOCOL: None
CLONE: false
NOTES: Steering wheel airbag must be replaced after deployment. Clock spring (spiral cable) must also be inspected and replaced if damaged. Confirm correct resistance before reconnecting.

Passenger Airbag Module Verify by VIN 2007-2008 x1

_years covers only 2007-2008 for this generation

Used/donor module guide

Compatible donor years: 2007, 2008

Always match the full part number before buying a used module.

PROTOCOL: None
CLONE: false
NOTES: Dashboard passenger airbag must be replaced after deployment. Dashboard assembly typically requires removal for access. Confirm OEM part number matches vehicle build date.

SRS Control Unit x12

A9069005701(0285011400) Verify by VIN 2009 Under center console

_years covers only 2009 for this generation

Used/donor module guide

Compatible donor years: 2009

Always match the full part number before buying a used module.

PART: A9069005701(0285011400)
LOCATION: Under center console
MFG: Bosch
NOTES: Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.

0285010349 Verify by VIN 2009 Under center console

_years covers only 2009 for this generation

Used/donor module guide

Compatible donor years: 2009

Always match the full part number before buying a used module.

PART: 0285010349
LOCATION: Under center console
MFG: Bosch
NOTES: Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.

A9064460542(0285010054) Verify by VIN 2009 Under center console

_years covers only 2009 for this generation

Used/donor module guide

Compatible donor years: 2009

Always match the full part number before buying a used module.

PART: A9064460542(0285010054)
LOCATION: Under center console
MFG: Bosch
NOTES: Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.

A9064461442(0285010349) Verify by VIN 2009 Under center console

_years covers only 2009 for this generation

Used/donor module guide

Compatible donor years: 2009

Always match the full part number before buying a used module.

PART: A9064461442(0285010349)
LOCATION: Under center console
MFG: Bosch
NOTES: Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.

A9069014700(0285011060) Verify by VIN 2009 Under center console

_years covers only 2009 for this generation

Used/donor module guide

Compatible donor years: 2009

Always match the full part number before buying a used module.

PART: A9069014700(0285011060)
LOCATION: Under center console
MFG: Bosch
NOTES: Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.

0285010054 Verify by VIN 2009 Under center console

_years covers only 2009 for this generation

Used/donor module guide

Compatible donor years: 2009

Always match the full part number before buying a used module.

PART: 0285010054
LOCATION: Under center console
MFG: Bosch
NOTES: Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.

0 285 010 054 Verify by VIN 2010-2018 Under center console

_years covers only 2010-2018 for this generation

Used/donor module guide

Compatible donor years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018

Always match the full part number before buying a used module.

PART: 0 285 010 054
LOCATION: Under center console
MFG: Bosch
CHIP/MCU: 95320
NOTES: Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.

0 285 010 349 Verify by VIN 2010-2018 Under center console

_years covers only 2010-2018 for this generation

Used/donor module guide

Compatible donor years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018

Always match the full part number before buying a used module.

PART: 0 285 010 349
LOCATION: Under center console
MFG: Bosch
CHIP/MCU: 95320
NOTES: Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.

A906 446 05 42 (0 285 010 054) Verify by VIN 2010-2018 Under center console

_years covers only 2010-2018 for this generation

Used/donor module guide

Compatible donor years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018

Always match the full part number before buying a used module.

PART: A906 446 05 42 (0 285 010 054)
LOCATION: Under center console
MFG: Bosch
CHIP/MCU: 95320
NOTES: Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.

A906 446 14 42 (0 285 010 349) Verify by VIN 2010-2018 Under center console

_years covers only 2010-2018 for this generation

Used/donor module guide

Compatible donor years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018

Always match the full part number before buying a used module.

PART: A906 446 14 42 (0 285 010 349)
LOCATION: Under center console
MFG: Bosch
CHIP/MCU: 95320
NOTES: Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.

A906 901 47 00 (0 285 011 060) Verify by VIN 2010-2018 Under center console

_years covers only 2010-2018 for this generation

Used/donor module guide

Compatible donor years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018

Always match the full part number before buying a used module.

PART: A906 901 47 00 (0 285 011 060)
LOCATION: Under center console
MFG: Bosch
CHIP/MCU: 95320
NOTES: Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.

A906-900-57-01-(0 285 011 400) Verify by VIN 2010-2018 Under center console

_years covers only 2010-2018 for this generation

Used/donor module guide

Compatible donor years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018

Always match the full part number before buying a used module.

PART: A906-900-57-01-(0 285 011 400)
LOCATION: Under center console
MFG: Bosch
CHIP/MCU: 95320
NOTES: Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.

ECU MODULES

ECU Modules

Engine Control Module (EDC16CP31) - OM642 3.0L V6 Turbo Diesel x3

A 642 150 23 30 Verify by VIN 2007 J2534

_years covers only 2007 for this generation

Used/donor module guide

Compatible donor years: 2007

Always match the full part number before buying a used module.

PART: A 642 150 23 30
PROTOCOL: J2534
CODING: Yes
CLONE: No
CHIP/MCU: Bosch EDC16CP31 (Motorola MPC555)
NOTES: 2007 W906 NCV3 Sprinter 2500/3500 OM642 3.0L V6 turbodiesel EDC16CP31 ECM (NCV3 launched US as 2007MY badged Dodge Sprinter; Mercedes-Benz Sprinter US re-badge from 2010MY). Compatible PNs documented by Precision ECU 2007-2019 W906 NCV3: A6421502330, A6421504341, A6421505372, A6421509500, A6421507679, A6429000001, A6429007100. EDC16CP31 used 2007-2009; EDC17CP46 from 2010+. Sold as Dodge Sprinter 2007-2009, then Freightliner/Mercedes from 2010. Bosch hardware family 0281013xxx. | Sources: https://www.precisionecu.com/products/2007-2019-mercedes-sprinter-2500-and-3500-freightliner-dodge-ram-truck-w906-ncv3-remanufactured-edc16cp31-and-edc17cp46-plug-n-drive-or-unlocked | Alt PN: 6421502330

A 642 150 23 30 Verify by VIN 2008 J2534

_years covers only 2008 for this generation

Used/donor module guide

Compatible donor years: 2008

Always match the full part number before buying a used module.

PART: A 642 150 23 30
PROTOCOL: J2534
CODING: Yes
CLONE: No
CHIP/MCU: Bosch EDC16CP31 (Motorola MPC555)
NOTES: 2008 W906 NCV3 Sprinter OM642 EDC16CP31. Same PN family as 2007 (A6421502330/A6421504341/A6429007100). Sold as Dodge Sprinter for 2008MY in US. | Sources: https://www.precisionecu.com/products/2007-2019-mercedes-sprinter-2500-and-3500-freightliner-dodge-ram-truck-w906-ncv3-remanufactured-edc16cp31-and-edc17cp46-plug-n-drive-or-unlocked | Alt PN: 6421502330

A 642 150 23 30 Verify by VIN 2009 J2534

_years covers only 2009 for this generation

Used/donor module guide

Compatible donor years: 2009

Always match the full part number before buying a used module.

PART: A 642 150 23 30
PROTOCOL: J2534
CODING: Yes
CLONE: No
CHIP/MCU: Bosch EDC16CP31 (Motorola MPC555)
NOTES: 2009 W906 NCV3 Sprinter OM642 EDC16CP31 (final year of Dodge Sprinter US badge before Freightliner/Mercedes re-badge for 2010MY). Same EDC16CP31 PN family (A6421502330/A6421504341/A6421505372/A6421509500/A6421507679). Note: For some 2009 production EDC17 family begins to appear; CP31 vs CP46 transition occurred around 2010MY. | Sources: https://www.precisionecu.com/products/2007-2019-mercedes-sprinter-2500-and-3500-freightliner-dodge-ram-truck-w906-ncv3-remanufactured-edc16cp31-and-edc17cp46-plug-n-drive-or-unlocked | Alt PN: 6421502330

Engine Control Module (ME9.7) - M272 3.5L V6 Gas x2

A 272 153 91 79 Verify by VIN 2007 J2534

_years covers only 2007 for this generation

Used/donor module guide

Compatible donor years: 2007

Always match the full part number before buying a used module.

PART: A 272 153 91 79
PROTOCOL: J2534
CODING: Yes
CLONE: No
CHIP/MCU: Bosch ME9.7 (Motorola MPC563)
NOTES: 2007 W906 NCV3 Sprinter gas-variant 3.5L M272 V6 ME9.7 ECM. Compatible PNs documented by Precision ECU 2007-2008 W906 NCV3 ME9.7: A2721539179, A2721534591, A2721536291, A2721531392. Note: Gas-engine Sprinter was relatively rare in US (mostly fleet/commercial sales); diesel OM642 was the dominant US-market Sprinter ECM. | Sources: https://www.precisionecu.com/products/2007-2008-mercedes-sprinter-2500-and-3500-freightliner-dodge-ram-truck-w906-ncv3-remanufactured-me9-7-plug-n-drive-or-unlocked | Alt PN: 2721539179

A 272 153 91 79 Verify by VIN 2008 J2534

_years covers only 2008 for this generation

Used/donor module guide

Compatible donor years: 2008

Always match the full part number before buying a used module.

PART: A 272 153 91 79
PROTOCOL: J2534
CODING: Yes
CLONE: No
CHIP/MCU: Bosch ME9.7 (Motorola MPC563)
NOTES: 2008 W906 NCV3 Sprinter gas 3.5L M272 V6 ME9.7. Same PN family as 2007 (A2721539179/A2721534591/A2721536291/A2721531392). Final year of US gas Sprinter; from 2009MY US Sprinter was diesel-only until 2014MY. | Sources: https://www.precisionecu.com/products/2007-2008-mercedes-sprinter-2500-and-3500-freightliner-dodge-ram-truck-w906-ncv3-remanufactured-me9-7-plug-n-drive-or-unlocked | Alt PN: 2721539179

ECM/CDI - 2.1L OM651 Diesel / 3.0L OM642 Diesel V6 Verify by VIN 2010-2014 x1

_years covers only 2010-2014 for this generation

Used/donor module guide

Compatible donor years: 2010, 2011, 2012, 2013, 2014

Always match the full part number before buying a used module.

NOTES: Mercedes Sprinter ECM. XENTRY SCN/CDI coding required.

ECM - OM654 2.0L Diesel Verify by VIN 2015-2018 x1

_years covers only 2015-2018 for this generation

Used/donor module guide

Compatible donor years: 2015, 2016, 2017, 2018

Always match the full part number before buying a used module.

PART: A654-906-07-05
PROTOCOL: XENTRY SCN Online
CODING: Yes
CLONE: No
CHIP/MCU: Bosch EDC17CP57 (OM654)
NOTES: XENTRY SCN Online. OM654 with SCR/AdBlue and DPF. Synchronize with EIS and ISM. AdBlue system reset after replacement. Battery charger required.

ECM - OM642 3.0L V6 Diesel Verify by VIN 2015-2018 x1

_years covers only 2015-2018 for this generation

Used/donor module guide

Compatible donor years: 2015, 2016, 2017, 2018

Always match the full part number before buying a used module.

PART: A642-906-07-05
PROTOCOL: XENTRY SCN Online
CODING: Yes
CLONE: No
CHIP/MCU: Bosch EDC17CP10 (OM642)
NOTES: XENTRY SCN Online. OM642 with SCR/AdBlue. Synchronize with EIS and ISM.

ECM - M264 2.0L Gas Verify by VIN 2015-2018 x1

_years covers only 2015-2018 for this generation

Used/donor module guide

Compatible donor years: 2015, 2016, 2017, 2018

Always match the full part number before buying a used module.

PART: A264-906-43-05
PROTOCOL: XENTRY SCN Online
CODING: Yes
CLONE: No
CHIP/MCU: Bosch MED17.7.2 (M264 gas)
NOTES: XENTRY SCN Online. Gas Sprinter. No AdBlue. Synchronize with EIS and ISM.

TCM - 7G/9G-Tronic Verify by VIN 2015-2018 x1

_years covers only 2015-2018 for this generation

Used/donor module guide

Compatible donor years: 2015, 2016, 2017, 2018

Always match the full part number before buying a used module.

PART: A725-272-01-05
PROTOCOL: XENTRY SCN Online
CODING: Yes
CLONE: No
CHIP/MCU: MB/ZF proprietary
NOTES: XENTRY SCN coding. Shift adaptation reset and drive cycle after programming.

BCM MODULES

BCM Modules

SAM (Signal Acquisition Module) - Front Verify by VIN 2007-2014

_years covers only 2007-2014 for this generation

Used/donor module guide

Compatible donor years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014

Always match the full part number before buying a used module.

NOTES: Mercedes Front SAM. XENTRY coding after replacement.

SAM (Signal Acquisition Module) - Rear Verify by VIN 2007-2014

_years covers only 2007-2014 for this generation

Used/donor module guide

Compatible donor years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014

Always match the full part number before buying a used module.

NOTES: Mercedes Rear SAM. XENTRY coding.

VEM (Van Electronics Module - W907 2024) Verify by VIN 2015-2018 A907-900-14-05

_years covers only 2015-2018 for this generation

Used/donor module guide

Compatible donor years: 2015, 2016, 2017, 2018

Donor must match part family A907-900-14-05 - requires cloning

Always match the full part number before buying a used module.

PART: A907-900-14-05
SECURITY: SCN Coding
CODING: Yes
CLONE: No
NOTES: XENTRY SCN coding mandatory. VEM varies by body type - confirm via VIN. MB server authorization. VIN-coded - no clone supported. 2024 VEM may have revised part suffix - confirm via XENTRY VIN lookup.

Front SAM (W907 2024) Verify by VIN 2015-2018 A907-900-16-05

_years covers only 2015-2018 for this generation

Used/donor module guide

Compatible donor years: 2015, 2016, 2017, 2018

Always match the full part number before buying a used module.

PART: A907-900-16-05
SECURITY: SCN Coding
CODING: Yes
CLONE: No
NOTES: XENTRY SCN coding mandatory. MB server authorization required.

EIS (W907) Verify by VIN 2015-2018 A907-905-26-03

_years covers only 2015-2018 for this generation

Used/donor module guide

Compatible donor years: 2015, 2016, 2017, 2018

Always match the full part number before buying a used module.

PART: A907-905-26-03
SECURITY: mb_eis
CODING: Yes
CLONE: No
NOTES: Replacement requires XENTRY + MB dealer network authorization. Must synchronize with ECM and ISM. Fleet key management - check status before replacement.

TCU / TCM TRANSMISSION MODULES

TCU / TCM Transmission Modules

TCU - 722.6 5-Speed Auto Verify by VIN 2007-2008 x1

_years covers only 2007-2008 for this generation

Used/donor module guide

Compatible donor years: 2007, 2008

Donor must match part family A0335457332 - requires cloning

Always match the full part number before buying a used module.

PART: A0335457332
PROTOCOL: Bench
CODING: Yes
CLONE: Yes
CHIP/MCU: Infineon C167
NOTES: NAG1 transmission, requires SCN coding with DAS/Xentry, ATF spec MB 236.14, adaptation reset required

TCU - G56 6-Speed Manual 2007-2008 x2

Part 1 Verify by VIN Virgin Flash

_years covers only 2007-2008 for this generation

Used/donor module guide

Compatible donor years: 2007, 2008

Always match the full part number before buying a used module.

PROTOCOL: Virgin Flash
CODING: No
CLONE: No
CHIP/MCU: N/A
NOTES: Manual transmission, no TCU present - clutch position sensor integration only

Part 2 Verify by VIN Virgin

_years covers only 2007-2008 for this generation

Used/donor module guide

Compatible donor years: 2007, 2008

Always match the full part number before buying a used module.

PROTOCOL: Virgin
CODING: No
CLONE: No
CHIP/MCU: N/A
NOTES: Manual transmission, no TCU present - clutch position sensor integration only

TCU - 5G-Tronic 722.6 5-Speed Auto Verify by VIN 2009-2010 x1

_years covers only 2009-2010 for this generation

Used/donor module guide

Compatible donor years: 2009, 2010

Donor must match part family A906270 - requires cloning

Always match the full part number before buying a used module.

PART: A906270
PROTOCOL: Bench
CODING: Yes
CLONE: Yes
CHIP/MCU: Infineon C167
NOTES: ATF spec MB 236.14, adaptation via STAR diagnostic required, transmission learning procedure mandatory after installation

TCU - 7G-Tronic 722.9 7-Speed Auto Verify by VIN 2009-2010 x1

_years covers only 2009-2010 for this generation

Used/donor module guide

Compatible donor years: 2009, 2010

Donor must match part family A906270; VIN-locked

Always match the full part number before buying a used module.

PART: A906270
PROTOCOL: J2534
CODING: Yes
CLONE: No
CHIP/MCU: Infineon TC1797
NOTES: ATF spec MB 236.15, requires STAR diagnostic for programming and adaptation, immobilizer sync required

TCU - Manual 6-Speed G56 2009-2010 x2

Part 1 Verify by VIN Virgin Flash

_years covers only 2009-2010 for this generation

Used/donor module guide

Compatible donor years: 2009, 2010

Always match the full part number before buying a used module.

PROTOCOL: Virgin Flash
CODING: No
CLONE: No
CHIP/MCU: N/A
NOTES: Manual transmission - no TCU present, clutch adjustment via engine ECU only

Part 2 Verify by VIN Virgin

_years covers only 2009-2010 for this generation

Used/donor module guide

Compatible donor years: 2009, 2010

Always match the full part number before buying a used module.

PROTOCOL: Virgin
CODING: No
CLONE: No
CHIP/MCU: N/A
NOTES: Manual transmission - no TCU present, clutch adjustment via engine ECU only

TCU - 5G-Tronic 5-Speed Auto x2

A906270 Verify by VIN 2011-2012 J2534

_years covers only 2011-2012 for this generation

Used/donor module guide

Compatible donor years: 2011, 2012

Always match the full part number before buying a used module.

PART: A906270
PROTOCOL: J2534
CODING: Yes
CLONE: No
CHIP/MCU: Bosch TC1797
NOTES: Requires SCN coding via STAR Diagnosis. ATF MB 236.14 spec. Adaptation reset required after installation.

A9069004600 Verify by VIN 2015-2016 OBD

_years covers only 2015-2016 for this generation

Used/donor module guide

Compatible donor years: 2015, 2016

Donor must match part family A9069004600 - requires cloning

Always match the full part number before buying a used module.

PART: A9069004600
PROTOCOL: OBD
CODING: Yes
CLONE: Yes
CHIP/MCU: Bosch TC1766
NOTES: Basic adaptation required, MB ATF 236.10 fluid, older NAG1 based system

TCU - 7G-Tronic Plus 7-Speed Auto x2

A906271 Verify by VIN 2011-2012 J2534

_years covers only 2011-2012 for this generation

Used/donor module guide

Compatible donor years: 2011, 2012

Always match the full part number before buying a used module.

PART: A906271
PROTOCOL: J2534
CODING: Yes
CLONE: No
CHIP/MCU: Bosch TC1797
NOTES: Requires SCN coding via STAR Diagnosis. ATF MB 236.15 spec. Basic adaptation and shift point learning required.

A9069004700 Verify by VIN 2015-2016 J2534

_years covers only 2015-2016 for this generation

Used/donor module guide

Compatible donor years: 2015, 2016

Donor must match part family A9069004700 - requires cloning

Always match the full part number before buying a used module.

PART: A9069004700
PROTOCOL: J2534
CODING: Yes
CLONE: Yes
CHIP/MCU: Continental TC179x
NOTES: Requires SCN coding, gear adaptation procedure, MB ATF 236.14 fluid spec, Star Diagnostic required

TCU - 7G-TRONIC Plus 7-Speed Auto (722.9) Verify by VIN 2013-2014 x1

_years covers only 2013-2014 for this generation

Used/donor module guide

Compatible donor years: 2013, 2014

Donor must match part family A0335457332 - requires cloning

Always match the full part number before buying a used module.

PART: A0335457332
PROTOCOL: J2534
CODING: Yes
CLONE: Yes
CHIP/MCU: Continental MPC5566
NOTES: Requires SCN coding via Xentry/DAS, ATF spec MB 236.14, transmission adaptation required after install

TCU - 5G-TRONIC 5-Speed Auto (722.6) Verify by VIN 2013-2014 x1

_years covers only 2013-2014 for this generation

Used/donor module guide

Compatible donor years: 2013, 2014

Donor must match part family A0335456832 - requires cloning

Always match the full part number before buying a used module.

PART: A0335456832
PROTOCOL: J2534
CODING: Yes
CLONE: Yes
CHIP/MCU: Continental MPC5566
NOTES: Requires SCN coding via Xentry/DAS, ATF spec MB 236.14, basic adaptation procedure via Star Diagnosis

TCU - 7G-TRONIC 7-Speed Auto (722.9) Verify by VIN 2017-2018 x1

_years covers only 2017-2018 for this generation

Used/donor module guide

Compatible donor years: 2017, 2018

Donor must match part family A906270 - requires cloning

Always match the full part number before buying a used module.

PART: A906270
PROTOCOL: J2534
CODING: Yes
CLONE: Yes
CHIP/MCU: Infineon TC1797
NOTES: Requires SCN coding via Xentry/DAS. ATF spec MB 236.14. Adaptive reset required after installation.

TCU - 9G-TRONIC 9-Speed Auto (725.0) Verify by VIN 2017-2018 x1

_years covers only 2017-2018 for this generation

Used/donor module guide

Compatible donor years: 2017, 2018

Always match the full part number before buying a used module.

PART: A906270
PROTOCOL: J2534
CODING: Yes
CLONE: No
CHIP/MCU: Infineon AURIX TC397
NOTES: Component protection active. Requires original TCU or authorized replacement via Mercedes STAR system. ATF spec MB 236.17.

TCU - 9G-TRONIC 9-Speed Auto Verify by VIN 2018 x1

_years covers only 2018 for this generation

Used/donor module guide

Compatible donor years: 2018

Always match the full part number before buying a used module.

PART: A0004461
PROTOCOL: J2534
CODING: Yes
CLONE: No
CHIP/MCU: Infineon TC297
NOTES: Requires MB Star Diagnostic for SCN coding, transmission adaptation procedure mandatory, ATF MB 236.17, VIN binding active

TCU - 7G-TRONIC PLUS 7-Speed Auto Verify by VIN 2018 x1

_years covers only 2018 for this generation

Used/donor module guide

Compatible donor years: 2018

Always match the full part number before buying a used module.

PART: A0034463
PROTOCOL: J2534
CODING: Yes
CLONE: No
CHIP/MCU: Infineon TC1797
NOTES: Legacy transmission option, requires MB Star for programming, transmission learn procedure required, ATF MB 236.14

ABS / BRAKE MODULES

ABS / Brake Modules

ABS/ESP Control Unit (N47-5) Verify by VIN 2007-2014

_years covers only 2007-2014 for this generation

Used/donor module guide

Compatible donor years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014

Always match the full part number before buying a used module.

NOTES: Mercedes ESP. XENTRY actuator test + variant coding.

Wheel Speed Sensor - Front (each) Verify by VIN 2007-2014

_years covers only 2007-2014 for this generation

Used/donor module guide

Compatible donor years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014

Always match the full part number before buying a used module.

NOTES: Active sensor.

Wheel Speed Sensor - Rear (each) Verify by VIN 2007-2014

_years covers only 2007-2014 for this generation

Used/donor module guide

Compatible donor years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014

Always match the full part number before buying a used module.

NOTES: Active sensor.

ESP/ABS Module (Bosch 9.1 - W907 2024) Verify by VIN 2015-2018 A907-431-14-05

_years covers only 2015-2018 for this generation

Used/donor module guide

Compatible donor years: 2015, 2016, 2017, 2018

Always match the full part number before buying a used module.

PART: A907-431-14-05
CLONE: No
NOTES: XENTRY coding required. Brake bleed via XENTRY. Steering angle calibration required. 4x4 models: additional 4WD integration.

OTHER MODULES (IPC, SAS)

Other Modules (IPC, SAS)

Instrument Panel Cluster (IPC) x7

A 906 900 15 08 Verify by VIN 2010

_years covers only 2010 for this generation

Used/donor module guide

Compatible donor years: 2010

Donor must match part family A 906 900 15 08 - requires cloning

Always match the full part number before buying a used module.

PART: A 906 900 15 08
CLONE: Yes
NOTES: IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.

A 906 900 22 08 Verify by VIN 2011

_years covers only 2011 for this generation

Used/donor module guide

Compatible donor years: 2011

Donor must match part family A 906 900 22 08 - requires cloning

Always match the full part number before buying a used module.

PART: A 906 900 22 08
CLONE: Yes
NOTES: IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.

A 906 900 29 08 Verify by VIN 2012

_years covers only 2012 for this generation

Used/donor module guide

Compatible donor years: 2012

Donor must match part family A 906 900 29 08 - requires cloning

Always match the full part number before buying a used module.

PART: A 906 900 29 08
CLONE: Yes
NOTES: IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.

A 906 900 36 08 Verify by VIN 2013

_years covers only 2013 for this generation

Used/donor module guide

Compatible donor years: 2013

Donor must match part family A 906 900 36 08 - requires cloning

Always match the full part number before buying a used module.

PART: A 906 900 36 08
CLONE: Yes
NOTES: IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.

A 906 900 43 08 Verify by VIN 2014

_years covers only 2014 for this generation

Used/donor module guide

Compatible donor years: 2014

Donor must match part family A 906 900 43 08 - requires cloning

Always match the full part number before buying a used module.

PART: A 906 900 43 08
CLONE: Yes
NOTES: IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.

A9064401048 Verify by VIN 2015-2017

_years covers only 2015-2017 for this generation

Used/donor module guide

Compatible donor years: 2015, 2016, 2017

Donor must match part family A9064401048 - requires cloning

Always match the full part number before buying a used module.

PART: A9064401048
CLONE: Yes
NOTES: IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.

A9074401048 Verify by VIN 2018

_years covers only 2018 for this generation

Used/donor module guide

Compatible donor years: 2018

Donor must match part family A9074401048 - requires cloning

Always match the full part number before buying a used module.

PART: A9074401048
CLONE: Yes
NOTES: IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.

Steering Angle Sensor (SAS) x2

Part 1 Verify by VIN

coding and programming fields are absent or ambiguous

Used/donor module guide

Compatible donor years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018

Always match the full part number before buying a used module.

CODING: Yes
NOTES: INTEGRATED (clock spring / steering column module

Part 2 Verify by VIN

coding and programming fields are absent or ambiguous

Used/donor module guide

Compatible donor years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018

Always match the full part number before buying a used module.

CODING: Yes
NOTES: cross-year extension)

CONNECTIVITY & ACCESSORIES

Connectivity & Accessories

MBUX (optional) or Audio20 (standard) Verify by VIN A907-900-35-05 (MBUX), A907-900-25-05 (AUDIO20)

coding and programming fields are absent or ambiguous

Used/donor module guide

Compatible donor years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018

Always match the full part number before buying a used module.

PART: A907-900-35-05 (MBUX), A907-900-25-05 (AUDIO20)
NOTES: XENTRY coding and MB authorization. OTA capable via MBUX. Fleet telematics re-pairing required if Pro Connect equipped.

Mercedes Pro Connect Telematics Verify by VIN A907-900-58-05

coding and programming fields are absent or ambiguous

Used/donor module guide

Compatible donor years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018

Always match the full part number before buying a used module.

PART: A907-900-58-05
NOTES: XENTRY coding. Re-registration to fleet account required. MB dealer and fleet operator coordination needed.

PTO Control Module Verify by VIN A907-900-62-03

coding and programming fields are absent or ambiguous

Used/donor module guide

Compatible donor years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018

Always match the full part number before buying a used module.

PART: A907-900-62-03
NOTES: XENTRY variant coding. VEM must be coded for PTO option. Confirm PTO interface type and equipment specs.

15 gateway, immobilizer, and security items documented across 2007-2018.

GATEWAY / SECURITY MODULES

Gateway / Security Modules

Central Gateway Module x8

Part 1 Dealer security required

vin_locked indicates immobilizer or VIN security

Used/donor module guide

Compatible donor years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018

Always match the full part number before buying a used module.

MFG: Renesas
SECURITY: VIN-locked (UDS)
VIN LOCKED: Yes
CODING: Yes
CHIP/MCU: D70F3373
NOTES: Compatibility label: S400 W221. Door control box | Notes: Read/Write

Part 2 Dealer security required

vin_locked indicates immobilizer or VIN security

Used/donor module guide

Compatible donor years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018

Always match the full part number before buying a used module.

MFG: Renesas
SECURITY: VIN-locked (UDS)
VIN LOCKED: Yes
CODING: Yes
CHIP/MCU: D70F3372
NOTES: Compatibility label: A164. KG intelligent computer | Notes: 315 MHz | KG intelligent computer | Notes: 433 MHz

Part 3 Dealer security required

vin_locked indicates immobilizer or VIN security

Used/donor module guide

Compatible donor years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018

Always match the full part number before buying a used module.

MFG: Renesas
SECURITY: VIN-locked (UDS)
VIN LOCKED: Yes
CODING: Yes
CHIP/MCU: D70F3372
NOTES: Compatibility label: A166. KG intelligent computer | Notes: 315 MHz

Part 4 Dealer security required

vin_locked indicates immobilizer or VIN security

Used/donor module guide

Compatible donor years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018

Always match the full part number before buying a used module.

MFG: Renesas
SECURITY: VIN-locked (UDS)
VIN LOCKED: Yes
CODING: Yes
CHIP/MCU: D70F3372
NOTES: Compatibility label: A211. KG intelligent computer | Notes: 433 MHz

Part 5 Dealer security required

vin_locked indicates immobilizer or VIN security

Used/donor module guide

Compatible donor years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018

Always match the full part number before buying a used module.

MFG: Renesas
SECURITY: VIN-locked (UDS)
VIN LOCKED: Yes
CODING: Yes
CHIP/MCU: D70F3624
NOTES: Compatibility label: A212. KG intelligent computer | Notes: 315 MHz

Part 6 Dealer security required

vin_locked indicates immobilizer or VIN security

Used/donor module guide

Compatible donor years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018

Always match the full part number before buying a used module.

MFG: Renesas
SECURITY: VIN-locked (UDS)
VIN LOCKED: Yes
CODING: Yes
CHIP/MCU: D70F3624
NOTES: Compatibility label: C200 A212. KG intelligent computer | Notes: Read/Write

Part 7 Dealer security required

vin_locked indicates immobilizer or VIN security

Used/donor module guide

Compatible donor years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018

Always match the full part number before buying a used module.

MFG: Renesas
SECURITY: VIN-locked (UDS)
VIN LOCKED: Yes
CODING: Yes
CHIP/MCU: D70F3372
NOTES: KG intelligent computer | Notes: Read/Write

Part 8 Dealer security required

vin_locked indicates immobilizer or VIN security

Used/donor module guide

Compatible donor years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018

Always match the full part number before buying a used module.

SECURITY: VIN-locked (UDS)
VIN LOCKED: Yes
CODING: Yes
CHIP/MCU: D70F3372(read-write)
NOTES: Compatibility label: General model. Central gateway routes CAN/CAN-FD/Ethernet between module domains. Replacement requires VIN write and as-built configuration load via OEM software (ODIS, FDRS, DTS Monaco, etc.).

KEY SECURITY & IMMOBILIZER

Key Security & Immobilizer

System EIS/EZS
Add Key Yes
All Keys Lost Yes

MB EIS + ISM + ECM triad - dealer network SCN authorization; fleet key management via XENTRY

IMMOBILIZER MODULES

Immobilizer Modules

EIS (Electronic Ignition Switch) Verify by VIN 2007, 2010, 2012-2014

_years covers only 2007, 2010, 2012-2014 for this generation

Used/donor module guide

Compatible donor years: 2007, 2010, 2012, 2013, 2014

Always match the full part number before buying a used module.

NOTES: Mercedes EIS. XENTRY EIS programming + NEC key adaptation. AKL requires XENTRY + key code.

EIS (Electronic Ignition Switch) Verify by VIN 2008-2009, 2011

_years covers only 2008-2009, 2011 for this generation

Used/donor module guide

Compatible donor years: 2008, 2009, 2011

Always match the full part number before buying a used module.

NOTES: Mercedes EIS. XENTRY EIS programming + NEC key adaptation. AKL requires XENTRY + key code.

ISM (W907 2024) Verify by VIN 2015-2018 A907-905-26-02

_years covers only 2015-2018 for this generation

Used/donor module guide

Compatible donor years: 2015, 2016, 2017, 2018

Donor must match part family A907-905-26-02; VIN-locked

Always match the full part number before buying a used module.

PART: A907-905-26-02
SECURITY: MB EIS/ISM
NOTES: EIS/ISM/ECM triad. XENTRY + MB dealer network. AKL requires full MB dealer authorization. Fleet key management - check status with fleet operator before any immobilizer work.

EIS - Immobilizer (W907 2024) Verify by VIN 2015-2018 A907-905-26-03

_years covers only 2015-2018 for this generation

Used/donor module guide

Compatible donor years: 2015, 2016, 2017, 2018

Donor must match part family A907-905-26-03; VIN-locked

Always match the full part number before buying a used module.

PART: A907-905-26-03
SECURITY: mb_eis
NOTES: Replacement requires MB dealer network XENTRY authorization. Fleet key settings must be preserved or re-configured.

KEY & FOB TYPES

Key & Fob Types

Mercedes Smart Key (IR + Comfort/Proximity) Verify by VIN 2007-2014

_years covers only 2007-2014 for this generation

Used/donor module guide

Compatible donor years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014

Always match the full part number before buying a used module.

NOTES: XENTRY adaptation. New key NEC coding + EIS binding.

Mechanical Emergency Key Blade Verify by VIN 2007-2014

_years covers only 2007-2014 for this generation

Used/donor module guide

Compatible donor years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014

Always match the full part number before buying a used module.

NOTES: Integrated in smart key.

Proximity Smart Key Fob Verify by VIN 2015-2018 A907-905-95-05

_years covers only 2015-2018 for this generation

Used/donor module guide

Compatible donor years: 2015, 2016, 2017, 2018

Always match the full part number before buying a used module.

PART: A907-905-95-05
NOTES: Key programming via XENTRY + MB dealer network only. Fleet key management - confirm with fleet operator before AKL. AKL requires MB Star Diagnosis + dealer authorization. Max 8 keys per vehicle.

Replacement Notes

EIS/EZS system. XENTRY/DAS required for key programming and module replacement. No obd pin extraction; akl supported.

ARCHITECTURE & CONNECTIVITY

Architecture & Connectivity

Body Construction: Steel unibody van (cargo/passenger/crew/cab-chassis variants) - independent front suspension, leaf-spring rear
OBD Protocol: ISO 15765-4 CAN / MB XENTRY proprietary extensions
CAN Architecture: MB CAN-C (powertrain), CAN-B (body/VEM), CAN-B2 (MBUX/telematics if equipped)
Infotainment: Audio20 (standard) or MBUX (optional) - Mercedes Pro Connect telematics (optional fleet)
OTA Capable: No
ECU Unlock Supported: No
Custom Programming: Yes

WHAT WE RESOLVE

NCV3 (2007-2018) common module and ADAS issues

ADAS calibration drift Watch for calibration needs after windshield, bumper, suspension, camera, or radar work. Documented systems include No Factory ADAS Systems (2007), Adaptive Cruise Control Sensor (2008-2009), Rear View Camera (2009), and Rear View Camera (2010-2014). Year-marked systems apply only to the shown range.
SRS crash-data and warning light SRS service can involve Airbag Control Module (ACM) (2007), Driver Airbag Module (2007-2008), and Passenger Airbag Module (2007-2008). Part numbers and crash-data workflow are confirmed for the exact year/VIN.
Replacement module setup ECU/PCM replacement programming, BCM configuration, TCU/TCM cloning, ABS/EBCM setup are represented in the merged generation data. Rows with year ranges do not apply to every model year; verify by VIN.
Gateway, key, and immobilizer access Gateway, key, and immobilizer procedures are represented by 15 merged security records. Access and all-keys-lost support varies by year - verify by VIN.

FREQUENTLY ASKED QUESTIONS

FAQ

Can you program Mercedes-Benz Sprinter (2007-2018) modules?

Yes. Core Auto Logic supports generation-scoped module programming for the Mercedes-Benz Sprinter (2007-2018). The merged generation data includes ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS coverage. Rows marked with a year range apply only to that part of the span; unmarked rows are present across the merged generation data.

Which modules are documented for Mercedes-Benz Sprinter (2007-2018)?

The Mercedes-Benz Sprinter (2007-2018) generation currently shows 52 core module records across ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS groups. SRS examples include Airbag Control Module (ACM) (2007), Driver Airbag Module (2007-2008), and Passenger Airbag Module (2007-2008). Part numbers and module variants must be confirmed for your exact year/VIN. Reference part number: A9069005701(0285011400) (2009) - confirm for your exact year/VIN.

Does Mercedes-Benz Sprinter (2007-2018) need ADAS calibration after glass or collision work?

The merged generation data documents 17 ADAS systems, including No Factory ADAS Systems (2007), Adaptive Cruise Control Sensor (2008-2009), Rear View Camera (2009), Rear View Camera (2010-2014), and Forward Collision Warning / AEB (2010-2014). Calibration triggers include ECM/ME Replacement (2007-2014), ABS/ESP Module Replacement (2007-2014), Front Bumper Repair or Replacement (2010-2014), and Forward Radar Replacement (2010-2018). Procedure type is VIN-specific scan-tool procedure; verify exact requirements by VIN before setup.

Can you reset the airbag module on Mercedes-Benz Sprinter (2007-2018)?

Yes. The generation data includes 16 SRS records, including Airbag Control Module (ACM) (2007), Driver Airbag Module (2007-2008), and Passenger Airbag Module (2007-2008). Bench reset, cloning, and replacement setup are handled after part-number review. Any SRS part number shown for this generation is planning data only - confirm for your exact year/VIN. Reference part number: A9069005701(0285011400) (2009) - confirm for your exact year/VIN.

Do all Mercedes-Benz Sprinter (2007-2018) years use the same parts?

No assumption should be made across the full span. The generation page merges rows across 2007-2018; any row that does not span all data-bearing years is printed with its year range or treated as varies by year - verify by VIN. Part numbers always require exact year/VIN confirmation before ordering, cloning, or programming.

Can you program keys or immobilizer systems for Mercedes-Benz Sprinter (2007-2018)?

Yes, where the VIN and security workflow support it. The generation data includes 15 gateway, immobilizer, or key-security records. Gateway examples include Central Gateway Module. Key records are present in the merged generation data. Security access, all-keys-lost eligibility, and add-key workflows vary by year - verify by VIN.

How long does service take for Mercedes-Benz Sprinter (2007-2018)?

Most programming, cloning, SRS, and calibration jobs are quoted after VIN, DTC, part number, and repair-scope review. Labor time varies by year - verify by VIN before scheduling. Mail-in module work typically depends on module condition, donor data, and shipping window.

Is Mercedes-Benz Sprinter (2007-2018) service mobile or mail-in?

Both paths are available depending on the job. Mobile service covers DFW on-vehicle diagnostics, ADAS setup, key programming, and post-repair coding. Mail-in service covers ECU, BCM, SRS, TCU, ABS, and other bench module work nationwide. We confirm the correct path for your exact year/VIN before scheduling.

OTHER GENERATIONS

More Sprinter generations

NCV3 2007-2018 You are here VS30 2019-2026

(945) 382-4065 Get a Quote