VIN / Build Split
VIN pos 4-8 identifies model/trim/engine/restraint. Hyundai WMI: 5NP, KMH, 5NM. Position 4-5 = model. Position 10 = model year code.
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
DFW Mobile Service
DFW Serving Dallas / Fort Worth
2025 Hyundai Tucson Supported Services
2025 Hyundai Tucson
ADAS calibration, module programming, and security relearns
Trims: S, SE, SEL, Limited, Calligraphy. SmartSense standard all trims (2019+).
Technical snapshot
- Platform NX4 (4th Gen) - Hyundai-Kia N3 Unibody
- CAN Architecture Hyundai CAN FD; OBD2 DLC ISO 15765-4 CAN
- Security Hyundai TIM AES-128; no OBD pin extraction; AKL requires GDS + Hyundai dealer authorization
What do you need fixed?
Choose a service to start your quote.
OVERVIEW
Expert ADAS calibration, module programming, and diagnostic recovery for the 2025 Hyundai Tucson. On this vehicle we cover documented systems include Forward Camera (Monocular), Forward Radar (77GHz), and Blind Spot Monitor Sensor - Left (BSM), this NX4 (4th Gen) - Hyundai-Kia N3 Unibody platform vehicle, SMARTRA / Smart Key immobilizer support, Hyundai ccNC infotainment programming. Mobile across the DFW Metroplex; mail-in module service is available nationwide.
Platform
NX4 (4th Gen) - Hyundai-Kia N3 Unibody
Production
2005-present
Trim Levels
Trims: S, SE, SEL, Limited, Calligraphy. SmartSense standard all trims (2019+).
Drivetrain
FWD / AWD
Engine
-
CAN Speed
Hyundai CAN FD; OBD2 DLC ISO 15765-4 CAN
YEAR-SPECIFIC NOTES
Infotainment
Hyundai ccNC
Wireless Support
CarPlay: Yes / Android Auto: Yes
Exact-year service summary for 2025 Hyundai Tucson
ADAS coverage
This 2025 Hyundai Tucson page documents 6 ADAS systems, including Forward Camera (Monocular), Forward Radar (77GHz), Blind Spot Monitor Sensor - Left (BSM), and Blind Spot Monitor Sensor - Right (BSM).
View ADAS dataCalibration triggers
Documented calibration triggers include Windshield Replacement, Forward Camera Replacement, Front Bumper / Radar Repair or Replacement, and Rear Bumper / BSM Sensor Replacement. Use the ADAS tab for the full trigger list.
View triggersProgrammable modules
This page indexes 25 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and IPC coverage.
View modulesGateway and security
This page includes 5 gateway, immobilizer, or key-security records for this 2025 Hyundai Tucson.
View securityCore Auto Logic capability
Core Auto Logic supports exact-year diagnostics, ADAS calibration, module programming, and security-access planning for the 2025 Hyundai Tucson using the documented systems and module data on this page.
Choose a sectionWhat changes on this exact year
Feature availability
Hyundai SmartSense: Automatic Emergency Braking, Lane Keeping Assist System, Lan - Available; Platform: NX4 (4th Gen) - Confirmed
Driver-assist suite
Hyundai SmartSense: Automatic Emergency Braking, Lane Keeping Assist System, Lane Following Assist, Highway Driving Assist (upper trims), Rear Cross-Traffic Collision Avoidance, Blind-Spot Collision Warning, Driver Attention Warning, Intelligent Speed Limit Assist - verify any 2024 refresh ADAS additions via our diagnostic software
VIN and build split
VIN pos 4-8 identifies model/trim/engine/restraint. Hyundai WMI: 5NP, KMH, 5NM. Position 4-5 = model. Position 10 = model year code.
Infotainment context
Hyundai ccNC; 10.25" touchscreen; Bluelink connected services; OTA updates on connected trims
Connectivity notes
Wireless CarPlay: Yes; Wireless Android Auto: Yes
Network and access
CAN: Hyundai CAN FD; OBD2 DLC ISO 15765-4 CAN
Tool access for this exact year
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
Factory scan, coding, and calibration access
Hyundai GDS Mobile / Hyundai KDS
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
ADAS scan, setup, and verification
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Bench cloning and chip-level recovery
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Choose a section to view data
SUPPORTED SYSTEMS
What we service on this vehicle
Documented module coverage for the 2025 Hyundai Tucson. Counts reflect modules our techs have programmed or calibrated on this exact platform.
ADAS Calibration
6 modules documented
Forward camera, radar, surround-view and lane-keep recalibration after windshield, suspension or fascia work.
Open ADAS tabEngine / ECU Programming
6 modules documented
Powertrain reprogramming, calibration updates, replacement ECU configuration and security access.
Open Modules tabBCM / Body Programming
3 modules documented
Body control module, gateway and accessory programming. Includes feature-bit reconfiguration.
Open Modules tabTCU / Transmission
3 modules documented
Transmission control module reprogramming, adaptive learning reset and replacement TCM clone.
Open Modules tabSRS / Airbag Reset
1 module documented
Crash-data clear, hard-code reset and replacement airbag module configuration.
Open Modules tabABS / Brake Module
5 modules documented
ABS / EBCM bleed support, replacement module coding and yaw-rate sensor calibration.
Open Modules tabIPC, SAS & Other Modules
3 modules documented
Instrument cluster cloning, steering angle sensor calibration and other supporting modules.
Open Modules tabConnectivity & Accessories
4 modules documented
Infotainment radio, surround view, remote start, trailer brake controller and other equipped systems.
Open Modules tabRecalibration Triggers
13 modules documented
Service events that require ADAS recalibration on this vehicle. Tap to see what triggers what.
Open ADAS tabNeed something not listed? Most undocumented modules can still be programmed.
Get a QuoteFeature availability 2
Hyundai SmartSense: Automatic Emergency Braking, Lane Keeping Assist System, Lan
AvailableCalibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.
Platform: NX4 (4th Gen)
ConfirmedVerify platform code matches when cross-referencing part numbers across model years.
WHAT WE RESOLVE
Common issues on this vehicle
Common Hyundai Tucson issues we resolve on this platform: Forward Camera (Monocular), Forward Radar (77GHz), Blind Spot Monitor Sensor - Left (BSM), and Blind Spot Monitor Sensor - Right (BSM) recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - NX4 (4th Gen) - Hyundai-Kia N3 Unibody platform uses Hyundai CAN FD; OBD2 DLC ISO 15765-4 CAN.
ADAS CALIBRATION MATRIX
ADAS systems on this vehicle
Hyundai SmartSense: Automatic Emergency Braking, Lane Keeping Assist System, Lane Following Assist, Highway Driving Assist (upper trims), Rear Cross-Traffic Collision Avoidance, Blind-Spot Collision Warning, Driver Attention Warning, Intelligent Speed Limit Assist - verify any 2024 refresh ADAS additions via our diagnostic software
Scroll for part numbers and Details
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Forward Camera (Monocular) | Camera | ADAS | Static | YES | ~99211-N9 (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Forward Radar (77GHz) | Radar | ADAS | Static + Dynamic | YES | ~99110-N9 (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Blind Spot Monitor Sensor - Left (BSM) | Radar | ADAS | Static + Dynamic | YES | ~99140-N9 (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Blind Spot Monitor Sensor - Right (BSM) | Radar | ADAS | Static + Dynamic | YES | ~99150-N9 (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Lane Keep Assist / Lane Departure Warning (LKA/LDW) | Camera | ADAS | None | YES | - | |
| Park Distance Control (PDC) | Ultrasonic | ADAS | None | YES | - |
ADAS SYSTEM
YES Supported
Identification
- System type
- Module category
- Sensor location
Part Numbers
- OEM
- Alternative
Calibration & Triggers
- Calibration type
- Programming approach
- Requires PMI
- Trigger events
Technical Notes
- Chip / MCU
- Service notes
Need this calibrated?
Get a quote for ADAS calibration WHEN IS CALIBRATION REQUIRED?
Triggers for ADAS recalibration
Windshield Replacement
Forward camera static calibration via GDS ADAS guided procedure. Approx. 2.5m target (verify in GDS for 2024 - if refresh introduced updated calibration routine, use GDS procedure over any prior documented distance). Level surface required.
Forward Camera Replacement
GDS ADAS guided calibration. Camera initialization + static calibration. Verify AEB/LKAS/LFA DTC-free. Confirm 2024 camera part number via GDS before ordering.
Front Bumper / Radar Repair or Replacement
GDS radar alignment + ADAS calibration. Verify mounting bracket. AEB/Smart Cruise DTC-free verify.
Rear Bumper / BSM Sensor Replacement
GDS BSD initialization. Function verify BCW/RCCA. DTC clear.
ABS / ESC Module Replacement
GDS initialization + power bleed. SAS zero-point reset. Drive 35+ mph. Verify DTC-free.
Wheel Alignment / Steering Work
GDS SAS zero-point reset. Drive 35+ mph. ESC/VSM clears after SAS learning.
ECM Replacement
GDS programming + VIN registration + IMMO coding. Throttle idle learn. Injector data if required.
Smart Key ECU Replacement
GDS + dealer authorization. All customer keys present. Re-register all keys. Verify start.
EPB Service (if equipped)
GDS EPB service mode. Initialization after reassembly. Apply/release function verify.
2024 Trim Refresh - ADAS Hardware Verification
Before ordering any ADAS part for a 2024 Tucson, perform GDS VIN lookup to confirm part numbers. 2024 refresh may have introduced sensor hardware variants on updated trims. Do not assume 2022-2023 part numbers are correct without GDS confirmation (verify via GDS).
Any Front-End Collision
Inspect and recalibrate forward camera after any front-end collision using GDS Mobile.
Forward Radar Replacement
Radar module replacement requires alignment/calibration using GDS Mobile.
Mirror Replacement
If BSD sensor is mirror-integrated, recalibration required. Verify sensor location; use GDS Mobile if applicable.
SRS Modules
SRS Control Module (SRSCM) 80100N9600NNB
- Part number
- 80100N9600NNB
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
ECU Modules
ECM - 2.5L GDI Smartstream (G4KH) ~39106-2S (VERIFY VIA GDS)
- Part number
- ~39106-2S (VERIFY VIA GDS)
- Notes
- GDS ECM programming + VIN registration + IMMO coding. Throttle idle learn. Injector data if required.
ECM - 1.6T GDI/TGDI (G4FJ / G4FP) ~39106-2E (VERIFY VIA GDS)
- Part number
- ~39106-2E (VERIFY VIA GDS)
- Notes
- GDS programming. Boost adaptation reset.
HEV Control Unit (PHEV only) ~36400-N9 (VERIFY VIA GDS)
- Part number
- ~36400-N9 (VERIFY VIA GDS)
- Notes
- PHEV only. HV disable required. GDS HEV ECU programming.
HV Battery ECU (PHEV only)
- Notes
- HV disconnect mandatory. GDS programming + cell balance verify.
TCM - DCT ~954 (VERIFY VIA GDS)
- Part number
- ~954 (VERIFY VIA GDS)
- Notes
- GDS TCM programming + adaptive reset. Drive cycle required.
10.25" Infotainment Head Unit
- Notes
- GDS variant config. Bluelink OTA available. Verify 2024 head unit part via GDS before ordering.
BCM Modules
Body Control Module (BCM) ~95400-N9 (VERIFY VIA GDS - CONFIRM 2024 PART)
- Part number
- ~95400-N9 (VERIFY VIA GDS - CONFIRM 2024 PART)
- Notes
- GDS programming + variant configuration. 2024 refresh: verify if ICU part number changed for refreshed trims. Build code configuration must match VIN.
Smart Key ECU ~95480-N9 (VERIFY VIA GDS)
- Part number
- ~95480-N9 (VERIFY VIA GDS)
- Notes
- GDS + dealer authorization. All keys erased on replacement - all customer keys required.
Power Tailgate Module (if equipped)
- Notes
- GDS initialization + height limit adjustment.
TCU / TCM Transmission Modules
TCU - 8DCT 8-Speed Dual Clutch 95440-N9
- Part number
- 95440-N9
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Continental TC387
- Notes
- Requires Hi-Scan Pro with latest updates, clutch adaptation required, use SP-IV ATF
TCU - 8AT 8-Speed Automatic 95440-N9
- Part number
- 95440-N9
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Hyundai Mobis TC1797
- Notes
- Basic setting and adaptation required via GDS2, use SP-IV-RR ATF
TCU - IVT Intelligent Variable Transmission 95440-N9
- Part number
- 95440-N9
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Continental MPC5777C
- Notes
- CVT fluid initialization required, belt learning procedure mandatory, use CVT-7 fluid
ABS / Brake Modules
ABS/ESC Module ~58920-N9 (VERIFY VIA GDS - CONFIRM 2024 PART)
- Part number
- ~58920-N9 (VERIFY VIA GDS - CONFIRM 2024 PART)
- Notes
- GDS initialization + power bleed. SAS zero-point reset. Drive 35+ mph. Verify DTC-free.
Steering Angle Sensor (SAS)
- Notes
- GDS SAS zero-point after alignment or ESC work.
Electronic Parking Brake (EPB)
- Notes
- GDS EPB service mode for pad service. Initialization after replacement.
Other Modules (IPC, SAS)
Instrument Panel Cluster (IPC) 94013-N9010
- Part number
- 94013-N9010
- Cloning supported
- Yes
- Notes
- NX4 IPC 10.25" digital cluster base
Instrument Panel Cluster (IPC) 94013-N9030
- Part number
- 94013-N9030
- Cloning supported
- Yes
- Notes
- NX4 IPC 12.3" fully digital cluster
Connectivity & Accessories
Hyundai Bluelink
- Notes
- OTA updates, remote start, connected services. Active subscription required.
HTRAC AWD Control (if equipped)
- Notes
- GDS AWD variant coding. DTC clear verify.
ARCHITECTURE & CONNECTIVITY
Architecture & Connectivity
- Body Construction
- N3 Unibody - Advanced High-Strength Steel (AHSS)
- OBD Protocol
- ISO 15765-4 CAN (500 kbps)
- CAN Architecture
- Hyundai CAN FD; OBD2 DLC ISO 15765-4 CAN
- Infotainment
- 10.25" touchscreen; Bluelink connected services; OTA updates on connected trims
- OTA Capable
- Yes
- Infotainment Name
- Hyundai ccNC
- Wireless CarPlay
- Yes
- Wireless Android Auto
- Yes
- ECU/TCM Unlocking
- Contact us
- ECU/TCM Flashing
- Confirmed
Reviewed coverage: 2025 - 1.5L T-GDI, 1.6L T-GDI, 1.6L T-GDI HYBRID, 2.0L CRDi (D4EA).
Confirm the exact engine, ECU, and any prerequisite access method before service.
OPENPILOT / COMMA.AI
Openpilot Compatibility
Not Supported
Not supported - 2025 outside openpilot year range (2021-2024)
Not in openpilot support tree as of April 2026. Supported years: 2021-2024. 2022-24 Hybrid and PHEV supported. Gas version limited. 2025+ unconfirmed.
FREQUENTLY ASKED QUESTIONS
FAQ
How much does ADAS calibration cost for a 2025 Hyundai Tucson?
ADAS calibration pricing for a 2025 Hyundai Tucson depends on which of its 6 documented systems need work after a repair. This vehicle is documented with Forward Camera (Monocular), Forward Radar (77GHz), Blind Spot Monitor Sensor - Left (BSM), Blind Spot Monitor Sensor - Right (BSM), and Lane Keep Assist / Lane Departure Warning (LKA/LDW). We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.
Can you reset the airbag light on a 2025 Hyundai Tucson?
Yes. The 2025 Hyundai Tucson uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: 80100N9600NNB. Mobile diagnosis and programming are available in DFW, and mail-in module service is available nationwide. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.
What is needed after replacing the windshield on a 2025 Hyundai Tucson?
After windshield replacement on a 2025 Hyundai Tucson, Forward Camera (Monocular), Forward Radar (77GHz), and Lane Keep Assist / Lane Departure Warning (LKA/LDW) rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in module service is available nationwide for eligible module work.
How long does a 2025 Hyundai Tucson module service take?
Most 2025 Hyundai Tucson onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 27 programmable modules documented in our database (6 ECU, 3 BCM, 3 TCU, 5 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module service is available nationwide.
Do you cover the 2025 Hyundai Tucson on-site, or is this mail-in only?
We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, post-repair recoding, and supported module work). Mail-in module service is available nationwide. Quote the work and we will confirm the active service path for the 2025 Hyundai Tucson. Do not ship a module unless support confirms next steps.
What kind of warranty do you offer on 2025 Hyundai Tucson programming?
Every programming, cloning, and calibration job on the 2025 Hyundai Tucson is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
Which modules on a 2025 Hyundai Tucson can you actually service?
We program, clone, repair, or replace the full programmable-module stack on a 2025 Hyundai Tucson. For this vehicle our database documents:
- 6 engine control (ECU/PCM)
- 3 transmission control (TCU/TCM)
- 3 body control (BCM and related)
- 5 ABS / brake control (EBCM)
- 3 immobilizer / security
- 2 key & fob
- 2 instrument cluster (IPC)
- 1 steering angle sensor (SAS)
- 6 ADAS module
Infotainment on this platform: Hyundai ccNC. Send the VIN and the operations performed and we will confirm support and pricing.
Additional Module Part Numbers
Additional OEM-sourced part numbers for the 2025 Hyundai Tucson covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.
- ECU / PCM Part Numbers
- 39110-2S166, 39110-2S263, 39110-2S269, 39131-2MND0
- BCM / Body Module Part Numbers
- ~95400-N9 (VERIFY VIA GDS - CONFIRM 2024 PART), ~95480-N9 (VERIFY VIA GDS)
- TCU / TCM Part Numbers
- 95440-N9
- SRS / Airbag Module Part Numbers
- 80100N9600NNB
- ABS / EBCM Part Numbers
- 58920-N9, CONTINENTAL ESC (TUCSON NX4 PLATFORM)
- Instrument Cluster (IPC) Part Numbers
- 94013-N9010, 94013-N9030
- Transmission Control Module (TCM) Part Numbers
- 95440-N9
Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.
Different trim or build?
Send your VIN and we'll confirm exact module support and pricing in the quote response.
Hit a security wall? We've got the keys.
1-year unlimited warranty on every flash and calibration.
Shared module fitment
Vehicles sharing modules with the 2025 Hyundai Tucson
These vehicles use one or more of the same replacement modules indexed for this vehicle.
Finish the repair
Need help finishing this repair?
Get onsite help in Dallas-Fort Worth. Ask about same-day availability or a one-time remote session for eligible non-VSP work.
Factory programming software Explore one-time factory coding and programming. We confirm the software and procedure for your vehicle. Module programming & recovery Replacing a module or dealing with a failed programming attempt? Send the part numbers and fault scan for review. Onsite tools & equipment Bring in a technician or ask about hourly, daily and weekly rentals where licensing and equipment availability allow.