Pre Sense Front (dual camera), Active Lane Assist, Adaptive Cruise Control Predi
StandardCalibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.
Use vehicle lookup when you know the year, make, and model. Use quote when the car is in front of you and the symptom matters more than the catalog page.
Check coverage by vehicle, or start with the VIN and symptoms.
Call dispatch: (945) 382-4065Covers model years 2019-2026 - one service guide for the whole generation.
Full ADAS calibration, module programming, and key security work for every Audi Q8 built on this platform. Same-day mobile service across the Dallas/Fort Worth metroplex; mail-in accepted nationwide.
The ADAS, module, and security rows below are consolidated across the full 2019-2026 generation. A year badge marks rows that apply only to part of the span; rows without a badge apply to every year. Year-specific differences are summarized under “What changes across 2019-2026”.
Expert ADAS calibration, module programming, and diagnostic recovery for the 2019 Audi Q8. On this vehicle we cover documented systems include Pre Sense Front / AEB (zFAS Gen2), Active Lane Assist / Lane Change Warning, and AI Traffic Jam Assist Level 2, this MLB-Evo-4M platform vehicle, Kessy Gen 4 (AES) / ZAS J518 immobilizer support. Mobile across the DFW Metroplex, mail-in nationwide for module-bench work.
Calibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.
Key programming requires manufacturer-level tool access.
Verify platform code matches when cross-referencing part numbers across model years.
Calibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
VW ODIS-S / ODIS-E / Audi VAS 6154
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
OEM subscription required
Make-level OEM tool map plus exact-year gateway and ADAS fields.
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Tool subscription required
Service-level scanner-vendor source packet plus exact-year ADAS records.
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Bench programmer source packet plus exact-year module/security records.
This platform uses CAN (powertrain + chassis); FlexRay (zFAS Gen2 ADAS); MOST150 (infotainment); LIN (body subsystems); 48V power bus (MHEV) with ISO 15765-4 CAN; UDS (ISO 14229); ODIS proprietary SVM extensions.
This page consolidates Audi Q8 service data for 2019-2026 across 8 model years; 8 years have merged CCT data.
Choose a yearMerged ADAS coverage includes 27 system records, including Pre Sense Front / AEB (zFAS Gen2) (2019), Active Lane Assist / Lane Change Warning (2019), AI Traffic Jam Assist Level 2 (2019), and Adaptive Cruise Control (ACC) with Predictive Efficiency Assist (2019). Year-marked systems apply only to the shown range.
View ADAS dataThis generation has 35 merged calibration trigger records. Trigger applicability can vary by year - verify by VIN before setup.
View triggersThe merged generation page indexes 91 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, IPC coverage. Part numbers are confirmed for the exact year/VIN.
View modulesGateway, immobilizer, and key-security coverage includes 10 merged records. Security procedures vary by year - verify by VIN.
View securityCore Auto Logic supports generation-level diagnostics, ADAS calibration, module programming, security-access planning, and mail-in bench work for the Audi Q8 2019-2026 span, with exact-year validation before service.
Get a quoterequired
Q8 4M dual front camera system requires our diagnostic software static target calibration after windshield R&R. Both wide-angle and telephoto cameras must pass independently. Q8 SUV windshield geometry differs from A6/A4 - use Q8-specific calibration procedure in our diagnostic software. our diagnostic software work order required first, SVM coding after calibration pass. OEM-equivalent glass only.
required
Q8 4M dual front camera system requires our diagnostic software static target calibration after windshield R&R. Both wide-angle and telephoto cameras must pass independently. Q8 SUV windshield geometry differs from A6/A4 - use Q8-specific calibration procedure in our diagnostic software. our diagnostic software work order required first, SVM coding after calibration pass. OEM-equivalent glass only.
required
Q8 4M dual front camera system requires our diagnostic software static target calibration after windshield R&R. Both wide-angle and telephoto cameras must pass independently. Q8 SUV windshield geometry differs from A6/A4 - use Q8-specific calibration procedure in our diagnostic software. our diagnostic software work order required first, SVM coding after calibration pass. OEM-equivalent glass only.
required
Q8 4M dual front camera system requires our diagnostic software static target calibration after windshield R&R. Both wide-angle and telephoto cameras must pass independently. Q8 SUV windshield geometry differs from A6/A4 - use Q8-specific calibration procedure in our diagnostic software. our diagnostic software work order required first, SVM coding after calibration pass. OEM-equivalent glass only.
required
Q8 4M dual front camera system requires our diagnostic software static target calibration after windshield R&R. Both wide-angle and telephoto cameras must pass independently. Q8 SUV windshield geometry differs from A6/A4 - use Q8-specific calibration procedure in our diagnostic software. our diagnostic software work order required first, SVM coding after calibration pass. OEM-equivalent glass only.
required
Q8 4M dual front camera system requires our diagnostic software static target calibration after windshield R&R. Both wide-angle and telephoto cameras must pass independently. Q8 SUV windshield geometry differs from A6/A4 - use Q8-specific calibration procedure in our diagnostic software. our diagnostic software work order required first, SVM coding after calibration pass. OEM-equivalent glass only.
required
Both dual front cameras must pass our diagnostic software static target calibration. Use Q8-specific our diagnostic software procedure. Work order first, SVM after pass. OEM glass only.
required
Both dual front cameras must pass our diagnostic software static target calibration. Use Q8-specific our diagnostic software procedure. Work order first, SVM after pass. OEM glass only.
required
Both dual front cameras must pass our diagnostic software static target calibration. Use Q8-specific our diagnostic software procedure. Work order first, SVM after pass. OEM glass only.
required
Both dual front cameras must pass our diagnostic software static target calibration. Use Q8-specific our diagnostic software procedure. Work order first, SVM after pass. OEM glass only.
required
Both dual front cameras must pass our diagnostic software static target calibration. Use Q8-specific our diagnostic software procedure. Work order first, SVM after pass. OEM glass only.
required
Both dual front cameras must pass our diagnostic software static target calibration. Q8 our diagnostic software procedure. Work order first, SVM after pass. OEM glass only.
required
Both dual front cameras must pass our diagnostic software static target calibration. Q8 our diagnostic software procedure. Work order first, SVM after pass. OEM glass only.
required
Both dual front cameras must pass our diagnostic software static target calibration. Q8 our diagnostic software procedure. Work order first, SVM after pass. OEM glass only.
required
Both dual front cameras must pass our diagnostic software static target calibration. Q8 our diagnostic software procedure. Work order first, SVM after pass. OEM glass only.
required
Both dual front cameras must pass our diagnostic software static target calibration. Q8 our diagnostic software procedure. Work order first, SVM after pass. OEM glass only.
required
Both cameras must pass our diagnostic software static target calibration. Q8 our diagnostic software procedure. Work order first, SVM after pass. OEM glass only.
required
Both cameras must pass our diagnostic software static target calibration. Q8 our diagnostic software procedure. Work order first, SVM after pass. OEM glass only.
required
Both cameras must pass our diagnostic software static target calibration. Q8 our diagnostic software procedure. Work order first, SVM after pass. OEM glass only.
required
Both cameras must pass our diagnostic software static target calibration. Q8 our diagnostic software procedure. Work order first, SVM after pass. OEM glass only.
required
Both cameras must pass our diagnostic software static target calibration. Q8 our diagnostic software procedure. Work order first, SVM after pass. OEM glass only.
required
Both cameras must pass our diagnostic software static target calibration. Work order first, SVM after pass. OEM glass only.
required
Both cameras must pass our diagnostic software static target calibration. Work order first, SVM after pass. OEM glass only.
required
Both cameras must pass our diagnostic software static target calibration. Work order first, SVM after pass. OEM glass only.
required
Both cameras must pass our diagnostic software static target calibration. Work order first, SVM after pass. OEM glass only.
required
Both cameras must pass our diagnostic software static target calibration. Work order first, SVM after pass. OEM glass only.
required
Both cameras must pass our diagnostic software static target calibration. Work order first, SVM after pass. OEM glass only. Verify 2024 build date.
required
Both cameras must pass our diagnostic software static target calibration. Work order first, SVM after pass. OEM glass only. Verify 2024 build date.
required
Both cameras must pass our diagnostic software static target calibration. Work order first, SVM after pass. OEM glass only. Verify 2024 build date.
required
Both cameras must pass our diagnostic software static target calibration. Work order first, SVM after pass. OEM glass only. Verify 2024 build date.
required
Both cameras must pass our diagnostic software static target calibration. Work order first, SVM after pass. OEM glass only. Verify 2024 build date.
required
ARS510 front radar static calibration required using our diagnostic software after any front bumper work. Q8 SUV body height requires correct our diagnostic software positioning procedure. Night Vision IR camera recalibration if displaced. Park sensor adaptation using our diagnostic software if sensors replaced.
required
ARS510 front radar static calibration required using our diagnostic software after any front bumper work. Q8 SUV body height requires correct our diagnostic software positioning procedure. Night Vision IR camera recalibration if displaced. Park sensor adaptation using our diagnostic software if sensors replaced.
required
ARS510 front radar static calibration required using our diagnostic software after any front bumper work. Q8 SUV body height requires correct our diagnostic software positioning procedure. Night Vision IR camera recalibration if displaced. Park sensor adaptation using our diagnostic software if sensors replaced.
required
ARS510 front radar static calibration required using our diagnostic software after any front bumper work. Q8 SUV body height requires correct our diagnostic software positioning procedure. Night Vision IR camera recalibration if displaced. Park sensor adaptation using our diagnostic software if sensors replaced.
required
ARS510 front radar static calibration required using our diagnostic software after any front bumper work. Q8 SUV body height requires correct our diagnostic software positioning procedure. Night Vision IR camera recalibration if displaced. Park sensor adaptation using our diagnostic software if sensors replaced.
required
ARS510 front radar static calibration required using our diagnostic software after any front bumper work. Q8 SUV body height requires correct our diagnostic software positioning procedure. Night Vision IR camera recalibration if displaced. Park sensor adaptation using our diagnostic software if sensors replaced.
required
ARS510 front radar static calibration required using our diagnostic software after any front bumper work. Q8 SUV body height requires correct our diagnostic software positioning procedure. Night Vision IR camera recalibration if displaced. Park sensor adaptation using our diagnostic software if sensors replaced.
required
ARS510 static calibration using our diagnostic software - Q8 SUV positioning required. Night Vision IR recalibration if displaced. Park sensor adaptation if replaced.
required
ARS510 static calibration using our diagnostic software - Q8 SUV positioning required. Night Vision IR recalibration if displaced. Park sensor adaptation if replaced.
required
ARS510 static calibration using our diagnostic software - Q8 SUV positioning required. Night Vision IR recalibration if displaced. Park sensor adaptation if replaced.
required
ARS510 static calibration using our diagnostic software - Q8 SUV positioning required. Night Vision IR recalibration if displaced. Park sensor adaptation if replaced.
required
ARS510 static calibration using our diagnostic software - Q8 SUV positioning required. Night Vision IR recalibration if displaced. Park sensor adaptation if replaced.
required
ARS510 static calibration using our diagnostic software - Q8 SUV positioning required. Night Vision IR recalibration if displaced. Park sensor adaptation if replaced.
required
ARS510 static calibration using our diagnostic software. Q8 SUV positioning. Park sensor adaptation if replaced.
required
ARS510 static calibration using our diagnostic software. Q8 SUV positioning. Park sensor adaptation if replaced.
required
ARS510 static calibration using our diagnostic software. Q8 SUV positioning. Park sensor adaptation if replaced.
required
ARS510 static calibration using our diagnostic software. Q8 SUV positioning. Park sensor adaptation if replaced.
required
ARS510 static calibration using our diagnostic software. Q8 SUV positioning. Park sensor adaptation if replaced.
required
ARS510 static calibration using our diagnostic software. Park sensor adaptation if replaced.
required
ARS510 static calibration using our diagnostic software. Park sensor adaptation if replaced.
required
ARS510 static calibration using our diagnostic software. Park sensor adaptation if replaced.
required
ARS510 static calibration using our diagnostic software. Park sensor adaptation if replaced.
required
ARS510 static calibration using our diagnostic software. Park sensor adaptation if replaced.
required
Rear corner side radar (BSD/Exit Warning) requires our diagnostic software static calibration if displaced or replaced. Rear surround view camera recalibration if displaced. Park sensor adaptation using our diagnostic software.
required
Rear corner side radar (BSD/Exit Warning) requires our diagnostic software static calibration if displaced or replaced. Rear surround view camera recalibration if displaced. Park sensor adaptation using our diagnostic software.
required
Rear corner side radar (BSD/Exit Warning) requires our diagnostic software static calibration if displaced or replaced. Rear surround view camera recalibration if displaced. Park sensor adaptation using our diagnostic software.
Yes
BSD radar alignment required after rear bumper R&R. Use ODIS-S.
required
Q8 mirror-integrated side cameras require our diagnostic software static calibration with targets after mirror replacement. All four surround view cameras must pass. BSD mirror LED - confirm function after reinstall.
required
Q8 mirror-integrated side cameras require our diagnostic software static calibration with targets after mirror replacement. All four surround view cameras must pass. BSD mirror LED - confirm function after reinstall.
required
Q8 mirror-integrated side cameras require our diagnostic software static calibration with targets after mirror replacement. All four surround view cameras must pass. BSD mirror LED - confirm function after reinstall.
required
Mirror side cameras require our diagnostic software static calibration with targets. All 4 cameras must pass. Confirm BSD LED function.
required
Mirror side cameras require our diagnostic software static calibration with targets. All 4 cameras must pass. Confirm BSD LED function.
required
Mirror side cameras require our diagnostic software static calibration with targets. All 4 cameras must pass. Confirm BSD LED function.
required
our diagnostic software static calibration with targets. All 4 cameras must pass.
required
our diagnostic software static calibration with targets. All 4 cameras must pass.
required
our diagnostic software static calibration with targets. All 4 cameras must pass.
required
our diagnostic software static calibration with targets. All 4 cameras must pass.
required
our diagnostic software static calibration with targets. All 4 cameras must pass.
required
Matrix LED headlight aim calibration required using our diagnostic software after headlight replacement or any front-end work affecting headlight position. our diagnostic software automates matrix segment adjustment. RS Q8 / SQ8 HD Matrix LED uses different procedure - confirm our diagnostic software work instruction for variant.
required
Matrix LED headlight aim calibration required using our diagnostic software after headlight replacement or any front-end work affecting headlight position. our diagnostic software automates matrix segment adjustment. RS Q8 / SQ8 HD Matrix LED uses different procedure - confirm our diagnostic software work instruction for variant.
required
our diagnostic software matrix LED aim calibration required after headlight replacement. RS Q8 / SQ8 HD Matrix - verify suffix using our diagnostic software VIN.
required
our diagnostic software matrix LED aim calibration after replacement. RS Q8 / SQ8 HD Matrix - verify suffix.
required
Full our diagnostic software scan mandatory. J234 replace-only after hard deployment in most cases. All deployed airbags and pretensioners must be replaced. Full ADAS recalibration - dual front cameras, front radar, side radar, 360 cameras, matrix LED. SVM coding on all replaced modules.
required
Full our diagnostic software scan mandatory. J234 replace-only after hard deployment in most cases. All deployed airbags and pretensioners must be replaced. Full ADAS recalibration - dual front cameras, front radar, side radar, 360 cameras, matrix LED. SVM coding on all replaced modules.
required
Full our diagnostic software scan mandatory. J234 replace-only after hard deployment in most cases. All deployed airbags and pretensioners must be replaced. Full ADAS recalibration - dual front cameras, front radar, side radar, 360 cameras, matrix LED. SVM coding on all replaced modules.
required
Full our diagnostic software scan mandatory. J234 replace-only after hard deployment in most cases. All deployed airbags and pretensioners must be replaced. Full ADAS recalibration - dual front cameras, front radar, side radar, 360 cameras, matrix LED. SVM coding on all replaced modules.
required
Full our diagnostic software scan mandatory. J234 replace-only after hard deployment in most cases. All deployed airbags and pretensioners must be replaced. Full ADAS recalibration - dual front cameras, front radar, side radar, 360 cameras, matrix LED. SVM coding on all replaced modules.
required
Full our diagnostic software scan mandatory. J234 replace-only after hard deployment in most cases. All deployed airbags and pretensioners must be replaced. Full ADAS recalibration - dual front cameras, front radar, side radar, 360 cameras, matrix LED. SVM coding on all replaced modules.
required
Full our diagnostic software scan mandatory. J234 replace-only after hard deployment in most cases. All deployed airbags and pretensioners must be replaced. Full ADAS recalibration - dual front cameras, front radar, side radar, 360 cameras, matrix LED. SVM coding on all replaced modules.
required
Full our diagnostic software scan mandatory. J234 replace-only after hard deployment in most cases. All deployed airbags and pretensioners must be replaced. Full ADAS recalibration - dual front cameras, front radar, side radar, 360 cameras, matrix LED. SVM coding on all replaced modules.
required
Full our diagnostic software scan. J234 likely replace-only. All airbags and pretensioners replaced. Full ADAS recalibration including matrix LED. SVM on all replaced modules.
required
Full our diagnostic software scan. J234 likely replace-only. All airbags and pretensioners replaced. Full ADAS recalibration including matrix LED. SVM on all replaced modules.
required
Full our diagnostic software scan. J234 likely replace-only. All airbags and pretensioners replaced. Full ADAS recalibration including matrix LED. SVM on all replaced modules.
required
Full our diagnostic software scan. J234 likely replace-only. All airbags and pretensioners replaced. Full ADAS recalibration including matrix LED. SVM on all replaced modules.
required
Full our diagnostic software scan. J234 likely replace-only. All airbags and pretensioners replaced. Full ADAS recalibration including matrix LED. SVM on all replaced modules.
required
Full our diagnostic software scan. J234 likely replace-only. All airbags and pretensioners replaced. Full ADAS recalibration. SVM on all replaced modules.
required
Full our diagnostic software scan. J234 likely replace-only. All airbags and pretensioners replaced. Full ADAS recalibration. SVM on all replaced modules.
required
Full our diagnostic software scan. J234 likely replace-only. All airbags and pretensioners replaced. Full ADAS recalibration. SVM on all replaced modules.
required
Full our diagnostic software scan. J234 likely replace-only. All airbags and pretensioners replaced. Full ADAS recalibration. SVM on all replaced modules.
required
our diagnostic software SVM coding and full four-wheel alignment required after J792 module or rear steering actuator replacement. Rear steering angle calibration using our diagnostic software adaptive calibration procedure. Vehicle must be on alignment rack before our diagnostic software calibration is started.
required
our diagnostic software SVM coding and full four-wheel alignment required after J792 module or rear steering actuator replacement. Rear steering angle calibration using our diagnostic software adaptive calibration procedure. Vehicle must be on alignment rack before our diagnostic software calibration is started.
required
our diagnostic software adaptation for battery state-of-health and BAS calibration after J1078 or 48V battery replacement. Regen braking coordination re-verified using our diagnostic software. Observe 48V safety procedures.
required
our diagnostic software adaptation for battery state-of-health and BAS calibration after J1078 or 48V battery replacement. Regen braking coordination re-verified using our diagnostic software. Observe 48V safety procedures.
required
our diagnostic software adaptation for battery state-of-health and BAS calibration after J1078 or 48V battery replacement. Regen braking coordination re-verified using our diagnostic software. Observe 48V safety procedures.
required
our diagnostic software SVM coding required for all module replacements on Q8 4M. Factory authorization required for J519, ECM, J518, and AKL. Battery SOC adequate before programming. Q8/SQ8/RS Q8 modules have different suffix coding - verify trim level using our diagnostic software VIN before ordering.
required
our diagnostic software SVM required. Factory auth for J519, ECM, J518, AKL. Battery SOC adequate. Verify Q8/SQ8/RS Q8 suffix using our diagnostic software VIN before ordering.
required
our diagnostic software SVM required. Factory auth for J519, ECM, J518, AKL. Battery SOC adequate. Verify Q8/SQ8/RS Q8 suffix.
required
our diagnostic software SVM required. Factory auth for J519, ECM, J518, AKL. Battery SOC adequate.
required
our diagnostic software SVM required. Factory auth for J519, ECM, J518, AKL. Battery SOC adequate. Verify 2024 build date for correct suffix.
Yes
Radar module replacement requires alignment/calibration using ODIS-S.
Yes
Radar module replacement requires alignment/calibration using ODIS-S.
Yes
Blind spot monitoring sensor replacement requires calibration using ODIS-S.
Yes
Blind spot monitoring sensor replacement requires calibration using ODIS-S.
required
our diagnostic software SVM coding and full alignment required. Alignment rack before our diagnostic software calibration.
required
our diagnostic software SVM coding and full alignment required. Alignment rack before our diagnostic software calibration.
required
our diagnostic software SVM and full alignment required. Alignment rack before our diagnostic software calibration.
required
our diagnostic software SVM and full alignment required. Alignment rack before our diagnostic software calibration.
| Year | VIN split | Infotainment | Wireless CarPlay | Wireless Android Auto | Trim notes |
|---|---|---|---|---|---|
| 2019 | VIN pos 4-6 identifies model. Audi WMI: WAU, WA1, WAG. Position 4-6 = model code. Position 10 = model year code. | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. | |||
| 2020 | VIN pos 4-6 identifies model. Audi WMI: WAU, WA1, WAG. Position 4-6 = model code. Position 10 = model year code. | Audi MMI | 1 | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. | |
| 2021 | VIN pos 4-6 identifies model. Audi WMI: WAU, WA1, WAG. Position 4-6 = model code. Position 10 = model year code. | Audi MMI | 1 | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. | |
| 2022 | VIN pos 4-6 identifies model. Audi WMI: WAU, WA1, WAG. Position 4-6 = model code. Position 10 = model year code. | Audi MMI | 1 | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. | |
| 2023 | VIN pos 4-6 identifies model. Audi WMI: WAU, WA1, WAG. Position 4-6 = model code. Position 10 = model year code. | Audi MMI | 1 | 1 | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. |
| 2024 | VIN pos 4-6 identifies model. Audi WMI: WAU, WA1, WAG. Position 4-6 = model code. Position 10 = model year code. | Audi MMI | 1 | 1 | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. |
| 2025 | VIN pos 4-6 identifies model. Audi WMI: WAU, WA1, WAG. Position 4-6 = model code. Position 10 = model year code. | Audi MMI | 1 | 1 | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. |
| 2026 | VIN pos 4-6 identifies model. Audi WMI: WAU, WA1, WAG. Position 4-6 = model code. Position 10 = model year code. | Audi MMI | 1 | 1 | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. |
Differences versus the generation reference year. Years not listed here match the shared platform data on this page.
27 ADAS systems documented across 2019-2026. Rows that apply to only part of the generation carry a year badge.
Pre Sense Front (dual camera), Active Lane Assist, Adaptive Cruise Control Predictive Efficiency Assist, AI Traffic Jam Assist Level 2 (Prestige), Blind Spot Detection Side Assist with Exit Warning, 360 Surround View with mirror cameras, Matrix LED (standard), Night Vision (optional), Rear Axle Steering (optional/SQ8/RS Q8 standard)
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Pre Sense Front / AEB (zFAS Gen2) 2019 | Front Camera + Radar Fusion | Fused | Static | YES | 4M0-907-107-X | |
| Active Lane Assist / Lane Change Warning 2019 | Forward Camera | Camera | Static | YES | 4M0-907-217-X | |
| AI Traffic Jam Assist Level 2 2019 | Fused (Camera + Radar + Side Radar) | Fused | Static | YES | SYSTEM-LEVEL - ZFAS GEN2 | |
| Adaptive Cruise Control (ACC) with Predictive Efficiency Assist 2019 | Front Radar | Radar | Static | YES | 4M0-907-561-X | |
| Side Assist / BSD with Exit Warning 2019 | Side Radar | Radar | Static + Dynamic | YES | 4M0-907-541-X (L), 4M0-907-542-X (R) | |
| 360-Degree Surround View with Mirror-Integrated Side Cameras 2019 | Surround Camera | Camera | Static | YES | 4M0-907-845-X (L MIRROR CAM), 4M0-907-846-X (R MIRROR CAM) | |
| Matrix LED Headlights (HD Matrix LED on RS Q8/SQ8) 2019 | Active Lighting | lighting | None | YES | 4M0-941-031-X (L), 4M0-941-032-X (R) | |
| Night Vision (IR Camera) - optional 2019 | Forward Camera | Camera | Static | YES | 4M0-907-141-X | |
| Pre Sense Front / AEB (zFAS Gen2, dual camera) 2020 | Front Camera + Radar Fusion | Fused | Static | YES | 4M0-907-107-X | |
| AI Traffic Jam Assist Level 2 2020 | Fused | Fused | Static | YES | - | |
| Adaptive Cruise Control / ACC Predictive Efficiency Assist 2020 | Front Radar | Radar | Static | YES | 4M0-907-561-X | |
| Side Assist / BSD with Exit Warning 2020-2026 | Side Radar | Radar | Static + Dynamic | YES | 4M0-907-541-X (L), 4M0-907-542-X (R) | |
| 360-Degree Surround View with Mirror Cameras 2020 | Surround Camera | Camera | Static | YES | 4M0-907-845-X (L), 4M0-907-846-X (R) | |
| Matrix LED Headlights 2020 | Active Lighting | lighting | None | YES | 4M0-941-031-X (L), 4M0-941-032-X (R) | |
| Pre Sense Front / AEB (zFAS Gen2) 2021 | Front Camera + Radar Fusion | Fused | Static | YES | 4M0-907-107-X | |
| AI Traffic Jam Assist Level 2 2021 | Fused | Fused | Static | YES | - | |
| Adaptive Cruise Control / ACC Predictive 2021 | Front Radar | Radar | Static | YES | 4M0-907-561-X | |
| 360-Degree Surround View with Mirror Cameras 2021-2022 | Surround Camera | Camera | Static | YES | 4M0-907-845-X (L), 4M0-907-846-X (R) | |
| Matrix LED Headlights 2021 | Active Lighting | lighting | None | YES | 4M0-941-031-X (L), 4M0-941-032-X (R) | |
| Pre Sense Front / AEB (zFAS Gen2) 2022 | Front Camera + Radar Fusion | Fused | Static | YES | 4M0-907-107-X | |
| Adaptive Cruise Control / AI TJA Level 2 2022-2026 | Fused | Radar | Static | YES | 4M0-907-561-X | |
| Matrix LED Headlights 2022 | Active Lighting | lighting | None | YES | 4M0-941-031-X (L), 4M0-941-032-X (R) | |
| Pre Sense Front / AEB (zFAS Gen2) 2023 | Front Camera + Radar Fusion | Fused | Static | YES | 4M0-907-107-X | |
| 360-Degree Surround View with Mirror Cameras 2023-2026 | Surround Camera | Camera | Static | YES | 4M0-907-845-X (L), 4M0-907-846-X (R) | |
| Matrix LED Headlights 2023 | Active Lighting | lighting | None | YES | 4M0-941-031-X (L), 4M0-941-032-X (R) | |
| Pre Sense Front / AEB (zFAS Gen2) 2024-2026 | Front Camera + Radar Fusion | Fused | Static | YES | 4M0-907-107-X | |
| Matrix LED Headlights 2024-2026 | Active Lighting | lighting | None | YES | 4M0-941-031-X (L), 4M0-941-032-X (R) |
ADAS SYSTEM
Need this calibrated?
Get a quote for ADAS calibrationQ8 4M dual front camera system requires our diagnostic software static target calibration after windshield R&R. Both wide-angle and telephoto cameras must pass independently. Q8 SUV windshield geometry differs from A6/A4 - use Q8-specific calibration procedure in our diagnostic software. our diagnostic software work order required first, SVM coding after calibration pass. OEM-equivalent glass only.
ARS510 front radar static calibration required using our diagnostic software after any front bumper work. Q8 SUV body height requires correct our diagnostic software positioning procedure. Night Vision IR camera recalibration if displaced. Park sensor adaptation using our diagnostic software if sensors replaced.
Rear corner side radar (BSD/Exit Warning) requires our diagnostic software static calibration if displaced or replaced. Rear surround view camera recalibration if displaced. Park sensor adaptation using our diagnostic software.
Q8 mirror-integrated side cameras require our diagnostic software static calibration with targets after mirror replacement. All four surround view cameras must pass. BSD mirror LED - confirm function after reinstall.
Matrix LED headlight aim calibration required using our diagnostic software after headlight replacement or any front-end work affecting headlight position. our diagnostic software automates matrix segment adjustment. RS Q8 / SQ8 HD Matrix LED uses different procedure - confirm our diagnostic software work instruction for variant.
Full our diagnostic software scan mandatory. J234 replace-only after hard deployment in most cases. All deployed airbags and pretensioners must be replaced. Full ADAS recalibration - dual front cameras, front radar, side radar, 360 cameras, matrix LED. SVM coding on all replaced modules.
our diagnostic software SVM coding and full four-wheel alignment required after J792 module or rear steering actuator replacement. Rear steering angle calibration using our diagnostic software adaptive calibration procedure. Vehicle must be on alignment rack before our diagnostic software calibration is started.
our diagnostic software adaptation for battery state-of-health and BAS calibration after J1078 or 48V battery replacement. Regen braking coordination re-verified using our diagnostic software. Observe 48V safety procedures.
our diagnostic software SVM coding required for all module replacements on Q8 4M. Factory authorization required for J519, ECM, J518, and AKL. Battery SOC adequate before programming. Q8/SQ8/RS Q8 modules have different suffix coding - verify trim level using our diagnostic software VIN before ordering.
Radar module replacement requires alignment/calibration using ODIS-S.
Blind spot monitoring sensor replacement requires calibration using ODIS-S.
Both dual front cameras must pass our diagnostic software static target calibration. Use Q8-specific our diagnostic software procedure. Work order first, SVM after pass. OEM glass only.
ARS510 static calibration using our diagnostic software - Q8 SUV positioning required. Night Vision IR recalibration if displaced. Park sensor adaptation if replaced.
Mirror side cameras require our diagnostic software static calibration with targets. All 4 cameras must pass. Confirm BSD LED function.
our diagnostic software matrix LED aim calibration required after headlight replacement. RS Q8 / SQ8 HD Matrix - verify suffix using our diagnostic software VIN.
our diagnostic software SVM coding and full alignment required. Alignment rack before our diagnostic software calibration.
Full our diagnostic software scan. J234 likely replace-only. All airbags and pretensioners replaced. Full ADAS recalibration including matrix LED. SVM on all replaced modules.
our diagnostic software SVM required. Factory auth for J519, ECM, J518, AKL. Battery SOC adequate. Verify Q8/SQ8/RS Q8 suffix using our diagnostic software VIN before ordering.
Radar module replacement requires alignment/calibration using ODIS-S.
BSD radar alignment required after rear bumper R&R. Use ODIS-S.
Blind spot monitoring sensor replacement requires calibration using ODIS-S.
Both dual front cameras must pass our diagnostic software static target calibration. Q8 our diagnostic software procedure. Work order first, SVM after pass. OEM glass only.
ARS510 static calibration using our diagnostic software. Q8 SUV positioning. Park sensor adaptation if replaced.
our diagnostic software static calibration with targets. All 4 cameras must pass.
our diagnostic software matrix LED aim calibration after replacement. RS Q8 / SQ8 HD Matrix - verify suffix.
our diagnostic software SVM and full alignment required. Alignment rack before our diagnostic software calibration.
Full our diagnostic software scan. J234 likely replace-only. All airbags and pretensioners replaced. Full ADAS recalibration. SVM on all replaced modules.
our diagnostic software SVM required. Factory auth for J519, ECM, J518, AKL. Battery SOC adequate. Verify Q8/SQ8/RS Q8 suffix.
Both cameras must pass our diagnostic software static target calibration. Q8 our diagnostic software procedure. Work order first, SVM after pass. OEM glass only.
our diagnostic software SVM required. Factory auth for J519, ECM, J518, AKL. Battery SOC adequate.
Both cameras must pass our diagnostic software static target calibration. Work order first, SVM after pass. OEM glass only.
ARS510 static calibration using our diagnostic software. Park sensor adaptation if replaced.
our diagnostic software static calibration with targets. All 4 cameras must pass.
Both cameras must pass our diagnostic software static target calibration. Work order first, SVM after pass. OEM glass only. Verify 2024 build date.
our diagnostic software SVM required. Factory auth for J519, ECM, J518, AKL. Battery SOC adequate. Verify 2024 build date for correct suffix.
91 documented Audi Q8 modules across 2019-2026. Open a group for part numbers, programming protocol, security notes, and clone support.
_years covers only 2019 for this generation
Compatible donor years: 2019
Always match the full part number before buying a used module.
_years covers only 2020 for this generation
Compatible donor years: 2020
Always match the full part number before buying a used module.
_years covers only 2021-2023 for this generation
Compatible donor years: 2021, 2022, 2023
Always match the full part number before buying a used module.
_years covers only 2024-2026 for this generation
Compatible donor years: 2024, 2025, 2026
Always match the full part number before buying a used module.
_years covers only 2019-2022 for this generation
Compatible donor years: 2019, 2020, 2021, 2022
Always match the full part number before buying a used module.
_years covers only 2023-2026 for this generation
Compatible donor years: 2023, 2024, 2025, 2026
Always match the full part number before buying a used module.
_years covers only 2019-2022 for this generation
Compatible donor years: 2019, 2020, 2021, 2022
Always match the full part number before buying a used module.
_years covers only 2019-2022 for this generation
Compatible donor years: 2019, 2020, 2021, 2022
Always match the full part number before buying a used module.
_years covers only 2019-2022 for this generation
Compatible donor years: 2019, 2020, 2021, 2022
Always match the full part number before buying a used module.
_years covers only 2019-2022 for this generation
Compatible donor years: 2019, 2020, 2021, 2022
Always match the full part number before buying a used module.
_years covers only 2019-2022 for this generation
Compatible donor years: 2019, 2020, 2021, 2022
Always match the full part number before buying a used module.
_years covers only 2019-2022 for this generation
Compatible donor years: 2019, 2020, 2021, 2022
Always match the full part number before buying a used module.
_years covers only 2019-2022 for this generation
Compatible donor years: 2019, 2020, 2021, 2022
Always match the full part number before buying a used module.
_years covers only 2023-2026 for this generation
Compatible donor years: 2023, 2024, 2025, 2026
Always match the full part number before buying a used module.
_years covers only 2023-2026 for this generation
Compatible donor years: 2023, 2024, 2025, 2026
Always match the full part number before buying a used module.
_years covers only 2023-2026 for this generation
Compatible donor years: 2023, 2024, 2025, 2026
Always match the full part number before buying a used module.
_years covers only 2023-2026 for this generation
Compatible donor years: 2023, 2024, 2025, 2026
Always match the full part number before buying a used module.
_years covers only 2023-2026 for this generation
Compatible donor years: 2023, 2024, 2025, 2026
Always match the full part number before buying a used module.
_years covers only 2023-2026 for this generation
Compatible donor years: 2023, 2024, 2025, 2026
Always match the full part number before buying a used module.
_years covers only 2023-2026 for this generation
Compatible donor years: 2023, 2024, 2025, 2026
Always match the full part number before buying a used module.
_years covers only 2023-2026 for this generation
Compatible donor years: 2023, 2024, 2025, 2026
Always match the full part number before buying a used module.
_years covers only 2019, 2023-2026 for this generation
Compatible donor years: 2019, 2023, 2024, 2025, 2026
Always match the full part number before buying a used module.
_years covers only 2019, 2023-2026 for this generation
Compatible donor years: 2019, 2023, 2024, 2025, 2026
Always match the full part number before buying a used module.
_years covers only 2019, 2023-2026 for this generation
Compatible donor years: 2019, 2023, 2024, 2025, 2026
Always match the full part number before buying a used module.
_years covers only 2019, 2023-2026 for this generation
Compatible donor years: 2019, 2023, 2024, 2025, 2026
Always match the full part number before buying a used module.
_years covers only 2020 for this generation
Compatible donor years: 2020
Always match the full part number before buying a used module.
_years covers only 2020 for this generation
Compatible donor years: 2020
Always match the full part number before buying a used module.
_years covers only 2021 for this generation
Compatible donor years: 2021
Always match the full part number before buying a used module.
_years covers only 2020 for this generation
Compatible donor years: 2020
Always match the full part number before buying a used module.
_years covers only 2020 for this generation
Compatible donor years: 2020
Always match the full part number before buying a used module.
_years covers only 2021 for this generation
Compatible donor years: 2021
Always match the full part number before buying a used module.
_years covers only 2022 for this generation
Compatible donor years: 2022
Always match the full part number before buying a used module.
_years covers only 2021 for this generation
Compatible donor years: 2021
Always match the full part number before buying a used module.
_years covers only 2022 for this generation
Compatible donor years: 2022
Always match the full part number before buying a used module.
_years covers only 2022 for this generation
Compatible donor years: 2022
Always match the full part number before buying a used module.
_years covers only 2019 for this generation
Compatible donor years: 2019
Donor must match part family 4M0-937-086-X; VIN-locked
Always match the full part number before buying a used module.
_years covers only 2020 for this generation
Compatible donor years: 2020
Donor must match part family 4M0-937-086-X; VIN-locked
Always match the full part number before buying a used module.
_years covers only 2019 for this generation
Compatible donor years: 2019
Always match the full part number before buying a used module.
_years covers only 2019 for this generation
Compatible donor years: 2019
Always match the full part number before buying a used module.
_years covers only 2019 for this generation
Compatible donor years: 2019
Always match the full part number before buying a used module.
_years covers only 2020-2021 for this generation
Compatible donor years: 2020, 2021
Always match the full part number before buying a used module.
_years covers only 2020-2026 for this generation
Compatible donor years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Always match the full part number before buying a used module.
_years covers only 2020 for this generation
Compatible donor years: 2020
Always match the full part number before buying a used module.
_years covers only 2021 for this generation
Compatible donor years: 2021
Always match the full part number before buying a used module.
_years covers only 2022-2026 for this generation
Compatible donor years: 2022, 2023, 2024, 2025, 2026
Always match the full part number before buying a used module.
_years covers only 2021 for this generation
Compatible donor years: 2021
Donor must match part family 4M0-937-086-X; VIN-locked
Always match the full part number before buying a used module.
_years covers only 2022-2026 for this generation
Compatible donor years: 2022, 2023, 2024, 2025, 2026
Donor must match part family 4M0-937-086-X; VIN-locked
Always match the full part number before buying a used module.
_years covers only 2022-2026 for this generation
Compatible donor years: 2022, 2023, 2024, 2025, 2026
Always match the full part number before buying a used module.
_years covers only 2019-2022 for this generation
Compatible donor years: 2019, 2020, 2021, 2022
Donor must match part family 09D927158 - requires cloning
Always match the full part number before buying a used module.
_years covers only 2023 for this generation
Compatible donor years: 2023
Donor must match part family 09D927158 - requires cloning
Always match the full part number before buying a used module.
_years covers only 2024 for this generation
Compatible donor years: 2024
Donor must match part family 09D927158 - requires cloning
Always match the full part number before buying a used module.
_years covers only 2025-2026 for this generation
Compatible donor years: 2025, 2026
Donor must match part family 09D927158 - requires cloning
Always match the full part number before buying a used module.
_years covers only 2019 for this generation
Compatible donor years: 2019
Always match the full part number before buying a used module.
_years covers only 2020 for this generation
Compatible donor years: 2020
Always match the full part number before buying a used module.
_years covers only 2021 for this generation
Compatible donor years: 2021
Always match the full part number before buying a used module.
_years covers only 2022-2023 for this generation
Compatible donor years: 2022, 2023
Always match the full part number before buying a used module.
_years covers only 2024-2026 for this generation
Compatible donor years: 2024, 2025, 2026
Always match the full part number before buying a used module.
_years covers only 2019 for this generation
Compatible donor years: 2019
Donor must match part family 4M8 920 750 A - requires cloning
Always match the full part number before buying a used module.
_years covers only 2020 for this generation
Compatible donor years: 2020
Donor must match part family 4K0 920 790 B - requires cloning
Always match the full part number before buying a used module.
_years covers only 2020 for this generation
Compatible donor years: 2020
Donor must match part family Q8 4M MLB EVO - requires cloning
Always match the full part number before buying a used module.
_years covers only 2020 for this generation
Compatible donor years: 2020
Always match the full part number before buying a used module.
_years covers only 2020 for this generation
Compatible donor years: 2020
Donor must match part family 4K0 920 890 E - requires cloning
Always match the full part number before buying a used module.
_years covers only 2021 for this generation
Compatible donor years: 2021
Donor must match part family 4K0 920 790 B - requires cloning
Always match the full part number before buying a used module.
_years covers only 2021 for this generation
Compatible donor years: 2021
Donor must match part family 4K0 920 890 E - requires cloning
Always match the full part number before buying a used module.
_years covers only 2022 for this generation
Compatible donor years: 2022
Donor must match part family 4K0 920 790 B - requires cloning
Always match the full part number before buying a used module.
_years covers only 2022 for this generation
Compatible donor years: 2022
Donor must match part family 4K0 920 790 F - requires cloning
Always match the full part number before buying a used module.
_years covers only 2023-2024 for this generation
Compatible donor years: 2023, 2024
Donor must match part family 4K0 920 790 F - requires cloning
Always match the full part number before buying a used module.
_years covers only 2023 for this generation
Compatible donor years: 2023
Donor must match part family 2023 Q8 FACELIFT - requires cloning
Always match the full part number before buying a used module.
_years covers only 2023 for this generation
Compatible donor years: 2023
Donor must match part family 4K0 920 890 E - requires cloning
Always match the full part number before buying a used module.
_years covers only 2024 for this generation
Compatible donor years: 2024
Donor must match part family Q8 4M FACELIFT 2024 - requires cloning
Always match the full part number before buying a used module.
_years covers only 2025-2026 for this generation
Compatible donor years: 2025, 2026
Donor must match part family 4M0 920 - requires cloning
Always match the full part number before buying a used module.
_years covers only 2019 for this generation
Compatible donor years: 2019
Always match the full part number before buying a used module.
_years covers only 2020-2026 for this generation
Compatible donor years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Always match the full part number before buying a used module.
_years covers only 2019 for this generation
Compatible donor years: 2019
Always match the full part number before buying a used module.
_years covers only 2019 for this generation
Compatible donor years: 2019
Always match the full part number before buying a used module.
_years covers only 2019 for this generation
Compatible donor years: 2019
Always match the full part number before buying a used module.
_years covers only 2019 for this generation
Compatible donor years: 2019
Always match the full part number before buying a used module.
_years covers only 2019 for this generation
Compatible donor years: 2019
Always match the full part number before buying a used module.
_years covers only 2019 for this generation
Compatible donor years: 2019
Always match the full part number before buying a used module.
_years covers only 2020 for this generation
Compatible donor years: 2020
Always match the full part number before buying a used module.
_years covers only 2020 for this generation
Compatible donor years: 2020
Always match the full part number before buying a used module.
_years covers only 2020 for this generation
Compatible donor years: 2020
Always match the full part number before buying a used module.
_years covers only 2021 for this generation
Compatible donor years: 2021
Always match the full part number before buying a used module.
_years covers only 2021 for this generation
Compatible donor years: 2021
Always match the full part number before buying a used module.
_years covers only 2022-2023 for this generation
Compatible donor years: 2022, 2023
Always match the full part number before buying a used module.
_years covers only 2022 for this generation
Compatible donor years: 2022
Always match the full part number before buying a used module.
_years covers only 2023-2026 for this generation
Compatible donor years: 2023, 2024, 2025, 2026
Always match the full part number before buying a used module.
_years covers only 2024-2026 for this generation
Compatible donor years: 2024, 2025, 2026
Always match the full part number before buying a used module.
10 gateway, immobilizer, and security items documented across 2019-2026.
vin_locked indicates immobilizer or VIN security
Compatible donor years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Always match the full part number before buying a used module.
vin_locked indicates immobilizer or VIN security
Compatible donor years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Always match the full part number before buying a used module.
vin_locked indicates immobilizer or VIN security
Compatible donor years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Always match the full part number before buying a used module.
Audi Kessy Gen 4 AES + ZAS (J518); ODIS + factory authorization required; no OBD pin extraction
_years covers only 2019 for this generation
Compatible donor years: 2019
Donor must match part family 4M0-909-131-X; VIN-locked
Always match the full part number before buying a used module.
_years covers only 2020 for this generation
Compatible donor years: 2020
Always match the full part number before buying a used module.
_years covers only 2021-2026 for this generation
Compatible donor years: 2021, 2022, 2023, 2024, 2025, 2026
Always match the full part number before buying a used module.
_years covers only 2019 for this generation
Compatible donor years: 2019
Always match the full part number before buying a used module.
_years covers only 2020 for this generation
Compatible donor years: 2020
Always match the full part number before buying a used module.
_years covers only 2021 for this generation
Compatible donor years: 2021
Always match the full part number before buying a used module.
_years covers only 2022-2026 for this generation
Compatible donor years: 2022, 2023, 2024, 2025, 2026
Always match the full part number before buying a used module.
Kessy Gen 4 (AES) / ZAS J518 system. ODIS required for key programming and module replacement. No obd pin extraction; akl supported.
Yes. Core Auto Logic supports generation-scoped module programming for the Audi Q8 (2019-2026). The merged generation data includes ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS coverage. Rows marked with a year range apply only to that part of the span; unmarked rows are present across the merged generation data.
The Audi Q8 (2019-2026) generation currently shows 57 core module records across ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS groups. SRS examples include Airbag Control Unit (ACU) (2019), Occupant Detection System (ODS - J706) (2019-2022), and ACM / SRS Module (2019-2022). Part numbers and module variants must be confirmed for your exact year/VIN. Reference part number: 4M0-959-655-X (2019) - confirm for your exact year/VIN.
The merged generation data documents 27 ADAS systems, including Pre Sense Front / AEB (zFAS Gen2) (2019), Active Lane Assist / Lane Change Warning (2019), AI Traffic Jam Assist Level 2 (2019), Adaptive Cruise Control (ACC) with Predictive Efficiency Assist (2019), and Side Assist / BSD with Exit Warning (2019). Calibration triggers include Windshield Replacement (2019), Front Bumper Repair or Replacement (2019), Rear Bumper Repair or Replacement (2019), and Mirror Replacement (2019). Procedure type is VIN-specific scan-tool procedure; verify exact requirements by VIN before setup.
Yes. The generation data includes 21 SRS records, including Airbag Control Unit (ACU) (2019), Occupant Detection System (ODS - J706) (2019-2022), and ACM / SRS Module (2019-2022). Bench reset, cloning, and replacement setup are handled after part-number review. Any SRS part number shown for this generation is planning data only - confirm for your exact year/VIN. Reference part number: 4M0-959-655-X (2019) - confirm for your exact year/VIN.
No assumption should be made across the full span. The generation page merges rows across 2019-2026; any row that does not span all data-bearing years is printed with its year range or treated as varies by year - verify by VIN. Part numbers always require exact year/VIN confirmation before ordering, cloning, or programming.
Yes, where the VIN and security workflow support it. The generation data includes 10 gateway, immobilizer, or key-security records. Gateway examples include Central Gateway Module. Key records are present in the merged generation data. Security access, all-keys-lost eligibility, and add-key workflows vary by year - verify by VIN.
Most programming, cloning, SRS, and calibration jobs are quoted after VIN, DTC, part number, and repair-scope review. Labor time varies by year - verify by VIN before scheduling. Mail-in module work typically depends on module condition, donor data, and shipping window.
Both paths are available depending on the job. Mobile service covers DFW on-vehicle diagnostics, ADAS setup, key programming, and post-repair coding. Mail-in service covers ECU, BCM, SRS, TCU, ABS, and other bench module work nationwide. We confirm the correct path for your exact year/VIN before scheduling.