VIN / Build Split
VIN pos 4-6 identifies model. Audi WMI: WAU, WA1, WAG. Position 4-6 = model code. Position 10 = model year code.
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
DFW Mobile Service
DFW Serving Dallas / Fort Worth
2019 Audi Q7 Supported Services
2019 Audi Q7
ADAS calibration, module programming, and security relearns
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Technical snapshot
- Platform MLB-Evo-4M
- CAN Architecture CAN bus (FlexRay for ADAS/zFAS on equipped builds); MOST for infotainment; LIN for body subsystems; 48V CAN for MHEV (SQ7 if equipped)
- Security Audi Kessy Gen 3+ AES encryption - ODIS + factory authorization required; no OBD pin extraction
What do you need fixed?
Choose a service to start your quote.
OVERVIEW
Expert ADAS calibration, module programming, and diagnostic recovery for the 2019 Audi Q7. On this vehicle we cover documented systems include Audi Pre-Sense Plus - Forward Camera (Pre-Sense City), Audi Pre-Sense Plus - Front Radar (77GHz), and Adaptive Cruise Assist (ACC) - Traffic Jam Assist, this MLB-Evo-4M platform vehicle, MQB/MLB IMMO immobilizer support. Mobile across the DFW Metroplex; mail-in module service is available nationwide.
Platform
MLB-Evo-4M
Production
2007-present
Trim Levels
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Drivetrain
AWD
Engine
-
CAN Speed
CAN bus (FlexRay for ADAS/zFAS on equipped builds); MOST for infotainment; LIN for body subsystems; 48V CAN for MHEV (SQ7 if equipped)
YEAR-SPECIFIC NOTES
Exact-year service summary for 2019 Audi Q7
ADAS coverage
This 2019 Audi Q7 page documents 6 ADAS systems, including Audi Pre-Sense Plus - Forward Camera (Pre-Sense City), Audi Pre-Sense Plus - Front Radar (77GHz), Adaptive Cruise Assist (ACC) - Traffic Jam Assist, and Audi Side Assist (BSM) / Rear Cross-Traffic Alert.
View ADAS dataCalibration triggers
Documented calibration triggers include Windshield Replacement, Front Bumper Repair or Replacement, Rear Bumper Repair or Replacement, and Any Collision. Use the ADAS tab for the full trigger list.
View triggersProgrammable modules
This page indexes 19 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and IPC coverage.
View modulesGateway and security
This page includes 5 gateway, immobilizer, or key-security records for this 2019 Audi Q7.
View securityCore Auto Logic capability
Core Auto Logic supports exact-year diagnostics, ADAS calibration, module programming, and security-access planning for the 2019 Audi Q7 using the documented systems and module data on this page.
Choose a sectionWhat changes on this exact year
Feature availability
Audi Pre Sense Front, Pre Sense City, Active Lane Assist, Adaptive Cruise, Blind - Standard; Platform: MLB-Evo-4M - Confirmed
Driver-assist suite
Audi Pre Sense Front, Pre Sense City, Active Lane Assist, Adaptive Cruise, Blind Spot Detection Side Assist, Night Vision (optional SQ7/Prestige), 360 Surround View (Prestige standard)
VIN and build split
VIN pos 4-6 identifies model. Audi WMI: WAU, WA1, WAG. Position 4-6 = model code. Position 10 = model year code.
Infotainment context
MMI Navigation Plus; Virtual Cockpit Plus; optional rear seat entertainment
Network and access
CAN: CAN bus (FlexRay for ADAS/zFAS on equipped builds); MOST for infotainment; LIN for body subsystems; 48V CAN for MHEV (SQ7 if equipped)
Tool access for this exact year
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
Factory scan, coding, and calibration access
VW ODIS-S / ODIS-E / Audi VAS 6154
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
ADAS scan, setup, and verification
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Bench cloning and chip-level recovery
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Choose a section to view data
SUPPORTED SYSTEMS
What we service on this vehicle
Documented module coverage for the 2019 Audi Q7. Counts reflect modules our techs have programmed or calibrated on this exact platform.
ADAS Calibration
6 modules documented
Forward camera, radar, surround-view and lane-keep recalibration after windshield, suspension or fascia work.
Open ADAS tabEngine / ECU Programming
4 modules documented
Powertrain reprogramming, calibration updates, replacement ECU configuration and security access.
Open Modules tabBCM / Body Programming
1 module documented
Body control module, gateway and accessory programming. Includes feature-bit reconfiguration.
Open Modules tabGateway / Security Access
3 modules documented
Secure gateway module identification, bypass workflow and security-access planning before programming.
Open Security tabTCU / Transmission
3 modules documented
Transmission control module reprogramming, adaptive learning reset and replacement TCM clone.
Open Modules tabSRS / Airbag Reset
4 modules documented
Crash-data clear, hard-code reset and replacement airbag module configuration.
Open Modules tabABS / Brake Module
1 module documented
ABS / EBCM bleed support, replacement module coding and yaw-rate sensor calibration.
Open Modules tabIPC, SAS & Other Modules
2 modules documented
Instrument cluster cloning, steering angle sensor calibration and other supporting modules.
Open Modules tabConnectivity & Accessories
4 modules documented
Infotainment radio, surround view, remote start, trailer brake controller and other equipped systems.
Open Modules tabRecalibration Triggers
10 modules documented
Service events that require ADAS recalibration on this vehicle. Tap to see what triggers what.
Open ADAS tabNeed something not listed? Most undocumented modules can still be programmed.
Get a QuoteFeature availability 2
Audi Pre Sense Front, Pre Sense City, Active Lane Assist, Adaptive Cruise, Blind
StandardCalibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.
Platform: MLB-Evo-4M
ConfirmedVerify platform code matches when cross-referencing part numbers across model years.
WHAT WE RESOLVE
Common issues on this vehicle
Common Audi Q7 issues we resolve on this platform: Audi Pre-Sense Plus - Forward Camera (Pre-Sense City), Audi Pre-Sense Plus - Front Radar (77GHz), Adaptive Cruise Assist (ACC) - Traffic Jam Assist, and Audi Side Assist (BSM) / Rear Cross-Traffic Alert recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - MLB-Evo-4M platform uses CAN bus (FlexRay for ADAS/zFAS on equipped builds); MOST for infotainment; LIN for body subsystems; 48V CAN for MHEV (SQ7 if equipped).
ADAS CALIBRATION MATRIX
ADAS systems on this vehicle
Audi Pre Sense Front, Pre Sense City, Active Lane Assist, Adaptive Cruise, Blind Spot Detection Side Assist, Night Vision (optional SQ7/Prestige), 360 Surround View (Prestige standard)
Scroll for part numbers and Details
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Audi Pre-Sense Plus - Forward Camera (Pre-Sense City) | Forward Camera | Camera | Static | YES | 4G0-907-217-C | |
| Audi Pre-Sense Plus - Front Radar (77GHz) | Front Radar | Radar | Static | YES | 4G0-907-561-A | |
| Adaptive Cruise Assist (ACC) - Traffic Jam Assist | Front Radar | Radar | Static | YES | 4G0-907-561-A | |
| Audi Side Assist (BSM) / Rear Cross-Traffic Alert | Side Radar | Radar | Static + Dynamic | YES | 4G0-907-566-B (L), 4G0-907-566-C (R) | |
| Lane Departure Warning / Active Lane Assist | Forward Camera | Camera | Static | YES | 4G0-907-217-C | |
| Rear View Camera | Rear Camera | Camera | Static | YES | - |
ADAS SYSTEM
YES Supported
Identification
- System type
- Module category
- Sensor location
Part Numbers
- OEM
- Alternative
Calibration & Triggers
- Calibration type
- Programming approach
- Requires PMI
- Trigger events
Technical Notes
- Chip / MCU
- Service notes
Need this calibrated?
Get a quote for ADAS calibration WHEN IS CALIBRATION REQUIRED?
Triggers for ADAS recalibration
Windshield Replacement Affected: Front Camera, Pre Sense Front, Pre Sense City, AEB, Adaptive Cruise
ODIS-guided static calibration required. ODIS work order and SVM coding mandatory.
Front Bumper Repair or Replacement Affected: Front Radar (ACC, Pre Sense, AEB), Night Vision camera (if equipped), front park sensors
Front radar static calibration via ODIS. Night Vision calibration required if equipped. Park sensor adaptation via ODIS.
Rear Bumper Repair or Replacement Affected: BSD Side Assist, rear park sensors
Rear side radar calibration via ODIS if displaced. Park sensor adaptation via ODIS.
Any Collision Affected: ACU, zFAS ADAS ECU, all deployed components; 3rd-row airbag if equipped
Full ODIS scan mandatory. ACU replace-only. Confirm all 3rd-row deployments via ODIS. ADAS recalibration required. SVM on all replaced modules.
Any Module Replacement Affected: All ODIS-coded modules including MHEV ECU (SQ7)
ODIS SVM coding required. Factory authorization for CEM, ECM, MHEV ECU, and AKL.
Mirror Replacement Affected: 360-degree surround camera (Prestige), BSD mirror LED
ODIS static calibration required after mirror replacement. Confirm BSD LED function.
Hatch or Tailgate Repair Affected: 360-degree surround camera rear view
Rear surround camera in hatch/tailgate. ODIS static calibration required if disturbed.
Forward Camera Replacement
Camera module replacement requires full recalibration using ODIS-S.
Forward Radar Replacement
Radar module replacement requires alignment/calibration using ODIS-S.
BSM Sensor Replacement
Blind spot monitoring sensor replacement requires calibration using ODIS-S.
SRS Modules
Airbag Control Unit (ACU) 4M0-959-655
- Part number
- 4M0-959-655
- Location
- Under center console
- Manufacturer
- Continental
- Chip / MCU
- 95128
- Notes
- Requires VCDS or ODIS for coding and adaptation. Gateway access control may require online login. Battery disconnect 90 seconds before removal.
Airbag Control Unit (ACU) 4M0-959-655-A
- Part number
- 4M0-959-655-A
- Location
- Under center console
- Manufacturer
- Continental
- Chip / MCU
- 95128
- Notes
- Requires VCDS or ODIS for coding and adaptation. Gateway access control may require online login. Battery disconnect 90 seconds before removal.
Airbag Control Unit (ACU) 4M0-959-655-E
- Part number
- 4M0-959-655-E
- Location
- Under center console
- Manufacturer
- Continental
- Chip / MCU
- 95128
- Notes
- Requires VCDS or ODIS for coding and adaptation. Gateway access control may require online login. Battery disconnect 90 seconds before removal.
Airbag Control Unit (ACU) 4M0-959-655-F
- Part number
- 4M0-959-655-F
- Location
- Under center console
- Manufacturer
- Continental
- Chip / MCU
- 95128
- Notes
- Requires VCDS or ODIS for coding and adaptation. Gateway access control may require online login. Battery disconnect 90 seconds before removal.
ECU Modules
ECM - 2.0L EA888 TFSI (45 TFSI, 248hp) 4M0-906-259-X
- Part number
- 4M0-906-259-X
- Protocol / method
- ODIS SVM
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Bosch MED17 / Continental SID
- Notes
- ODIS + factory authorization required. SVM for adaptation. Verify suffix via ODIS VIN.
ECM - 3.0L EA839 V6 TFSI (55 TFSI, 335hp) 4M0-907-115-X
- Part number
- 4M0-907-115-X
- Protocol / method
- ODIS SVM
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Bosch MED17 / Continental SID
- Notes
- ODIS + factory authorization required. Verify suffix via ODIS VIN.
ECM - SQ7 4.0L V8 TFSI (500hp) 4M0-907-115-X (DIFFERENT SUFFIX)
- Part number
- 4M0-907-115-X (DIFFERENT SUFFIX)
- Protocol / method
- ODIS SVM
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Bosch MED17 / Continental SID
- Notes
- ODIS + factory authorization required. Different suffix from V6 - verify via ODIS VIN. MHEV variants require separate MHEV ECU. 12V-only tools incompatible.
MHEV ECU - SQ7 48V Mild Hybrid (if equipped)
- Protocol / method
- ODIS SVM
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Continental / Bosch MHEV controller
- Notes
- 48V MHEV system on SQ7. ODIS + factory authorization required. Not compatible with 12V-only tools.
BCM Modules
Central Electronic Module (CEM) 4M0-937-084-X
- Part number
- 4M0-937-084-X
- Security
- AES Immobilizer
- Coding required
- Yes
- Cloning supported
- No
- Notes
- Immobilizer and gateway in CEM. ODIS SVM required. Factory authorization required. Q7-specific part numbers.
TCU / TCM Transmission Modules
TCU - 0D9 7-Speed S-Tronic 4M0927769
- Part number
- 4M0927769
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Continental MPC5777M
- Notes
- Continental DL501 gen2, requires ODIS coding, adaptation reset, ATF G055540A2
TCU - 0BK 8-Speed Tiptronic 4M0927156
- Part number
- 4M0927156
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Infineon TC1797
- Notes
- ZF 8HP70/8HP90, requires VCDS/ODIS adaptation, shift quality learn, ATF G060162A2
TCU - 0CR 8-Speed Tiptronic Hybrid 4M0927769
- Part number
- 4M0927769
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Infineon TC1797
- Notes
- ZF 8HP hybrid variant, requires hybrid system coding, ATF G060162A2
ABS / Brake Modules
ABS/ESC Module 4M0-614-517-X
- Part number
- 4M0-614-517-X
- Cloning supported
- No
- Notes
- ODIS required for adaptation and coding. Brake fluid bleed required - ODIS automated bleed cycle.
Other Modules (IPC, SAS)
Instrument Panel Cluster (IPC) 4M0 920 750 B
- Part number
- 4M0 920 750 B
- Cloning supported
- Yes
- Notes
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Steering Angle Sensor (SAS)
- Coding required
- Yes
- Notes
- INTEGRATED (J527 clock spring/coil)
Connectivity & Accessories
Virtual Cockpit Plus (Digital Instrument Cluster)
- Notes
- ODIS SVM coding required. VIN-coded.
Rear Seat Entertainment System
- Notes
- ODIS coding required if modules replaced.
Audi Phone Box / Wireless Charging
- Notes
- ODIS coding required if module replaced.
Gateway / Security Modules
Central Gateway Module
- Manufacturer
- STMicroelectronics
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- ST10F269
- Notes
- AMP Notes: Read/Write
Central Gateway Module
- Manufacturer
- Renesas
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- D70F3380
- Notes
- Compatibility label: A4/A5/Q5. BCM Notes: Read/Write
Central Gateway Module
- Manufacturer
- Renesas
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- D70F3548 2018
- Notes
- Compatibility label: A4L. Headlight modules Notes: Read/Write
ARCHITECTURE & CONNECTIVITY
Architecture & Connectivity
- Body Construction
- MLB Evo unibody; 3-row full-size SUV; steel and aluminum composite construction
- OBD Protocol
- ISO 15765-4 CAN; UDS (ISO 14229); ODIS proprietary extensions
- CAN Architecture
- CAN bus (FlexRay for ADAS/zFAS on equipped builds); MOST for infotainment; LIN for body subsystems; 48V CAN for MHEV (SQ7 if equipped)
- Infotainment
- MMI Navigation Plus; Virtual Cockpit Plus; optional rear seat entertainment
- OTA Capable
- No
- ECU/TCM Unlocking
- Contact us
- ECU/TCM Flashing
- Confirmed
Reviewed coverage: 2019 - 2.0L 40 TFSI (CYNB), 2.0L TFSI (CYRB), 3.0L 45 TDI CR (CVMD), 3.0L 45 TDI CR (DCPC), 3.0L 45 TDI CR (DEND), 3.0L TDI CR (CRTD), 3.0L TDI CR (CRTE), 3.0L TDI Ultra (CZZA), 3.0L TFSI quattro (CJTB), 3.0L V6 55TFSI 24v MHEV (DLZA), 4.0 TFSI, 45 TDI (3.0), 45 TFSI (2.0) MHEV, 50 TDI (3.0), 55 TFSI (3.0), 55 TFSI-e, 60 TFSI-e.
Confirm the exact engine, ECU, and any prerequisite access method before service.
FREQUENTLY ASKED QUESTIONS
FAQ
How much does ADAS calibration cost for a 2019 Audi Q7?
ADAS calibration pricing for a 2019 Audi Q7 depends on which of its 6 documented systems need work after a repair. This vehicle is documented with Audi Pre-Sense Plus - Forward Camera (Pre-Sense City), Audi Pre-Sense Plus - Front Radar (77GHz), Adaptive Cruise Assist (ACC) - Traffic Jam Assist, Audi Side Assist (BSM) / Rear Cross-Traffic Alert, and Lane Departure Warning / Active Lane Assist. We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.
Can you reset the airbag light on a 2019 Audi Q7?
Yes. The 2019 Audi Q7 uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: 4M0-959-655. Mobile diagnosis and programming are available in DFW, and mail-in module service is available nationwide. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.
What is needed after replacing the windshield on a 2019 Audi Q7?
After windshield replacement on a 2019 Audi Q7, Audi Pre-Sense Plus - Forward Camera (Pre-Sense City), Lane Departure Warning / Active Lane Assist, and Rear View Camera rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in module service is available nationwide for eligible module work.
How long does a 2019 Audi Q7 module service take?
Most 2019 Audi Q7 onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 19 programmable modules documented in our database (4 ECU, 1 BCM, 3 TCU, 1 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module service is available nationwide.
Do you cover the 2019 Audi Q7 on-site, or is this mail-in only?
We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, post-repair recoding, and supported module work). Mail-in module service is available nationwide. Quote the work and we will confirm the active service path for the 2019 Audi Q7. Do not ship a module unless support confirms next steps.
What kind of warranty do you offer on 2019 Audi Q7 programming?
Every programming, cloning, and calibration job on the 2019 Audi Q7 is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
Which modules on a 2019 Audi Q7 can you actually service?
We program, clone, repair, or replace the full programmable-module stack on a 2019 Audi Q7. For this vehicle our database documents:
- 4 engine control (ECU/PCM)
- 3 transmission control (TCU/TCM)
- 1 body control (BCM and related)
- 1 ABS / brake control (EBCM)
- 1 immobilizer / security
- 1 key & fob
- 1 instrument cluster (IPC)
- 1 steering angle sensor (SAS)
- 6 ADAS module
Send the VIN and the operations performed and we will confirm support and pricing.
Additional Module Part Numbers
Additional OEM-sourced part numbers for the 2019 Audi Q7 covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.
- ADAS Module Part Numbers
- 4M0 907 107 B
- ECU / PCM Part Numbers
- 4M0 907 115 C, 4M0 907 115 D
- BCM / Body Module Part Numbers
- 4M0-937-084-X
- TCU / TCM Part Numbers
- 4M0927769, 4M0927156
- SRS / Airbag Module Part Numbers
- 4M0-959-655, 4M0-959-655-A, 4M0-959-655-E, 4M0-959-655-F
- ABS / EBCM Part Numbers
- 4M0 614 517 D
- Instrument Cluster (IPC) Part Numbers
- 4M0 920 750 B
- Transmission Control Module (TCM) Part Numbers
- 4M0927769, 4M0927156
- Steering Angle Sensor (SAS) Part Numbers
- INTEGRATED (J527 CLOCK SPRING
Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.
Different trim or build?
Send your VIN and we'll confirm exact module support and pricing in the quote response.
Hit a security wall? We've got the keys.
1-year unlimited warranty on every flash and calibration.
Shared module fitment
Vehicles sharing modules with the 2019 Audi Q7
These vehicles use one or more of the same replacement modules indexed for this vehicle.
Finish the repair
Need help finishing this repair?
Get onsite help in Dallas-Fort Worth. Ask about same-day availability or a one-time remote session for eligible non-VSP work.
ODIS-S Explore one-time factory coding and programming. We confirm the software and procedure for your vehicle. Module programming & recovery Replacing a module or dealing with a failed programming attempt? Send the part numbers and fault scan for review. Onsite tools & equipment Bring in a technician or ask about hourly, daily and weekly rentals where licensing and equipment availability allow.