VIN / Build Split
VIN pos 4-6 identifies model. Audi WMI: WAU, WA1, WAG. Position 4-6 = model code. Position 10 = model year code.
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
DFW Mobile Service
DFW Serving Dallas / Fort Worth
2020 Audi Q7 Supported Services
2020 Audi Q7
ADAS calibration, module programming, and security relearns
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Technical snapshot
- Platform MLB-Evo-4M
- CAN Architecture CAN bus (FlexRay for ADAS/zFAS on equipped builds); MOST for infotainment; LIN for body subsystems; 48V CAN for MHEV (SQ7 if equipped)
- Security Audi Kessy Gen 3+ AES encryption - ODIS + factory authorization required; no OBD pin extraction
OVERVIEW
Expert ADAS calibration, module programming, and diagnostic recovery for the 2020 Audi Q7. On this vehicle we cover documented systems include Pre Sense Front / Pre Sense City, Active Lane Assist, and Adaptive Cruise Control (ACC), this MLB-Evo-4M platform vehicle, MQB/MLB IMMO immobilizer support, Audi MMI infotainment programming. Mobile across the DFW Metroplex; mail-in module work is temporarily unavailable.
Platform
MLB-Evo-4M
Production
2007-present
Trim Levels
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Drivetrain
AWD
Engine
-
CAN Speed
CAN bus (FlexRay for ADAS/zFAS on equipped builds); MOST for infotainment; LIN for body subsystems; 48V CAN for MHEV (SQ7 if equipped)
YEAR-SPECIFIC NOTES
Infotainment
Audi MMI
Wireless Support
CarPlay: Yes
Exact-year service summary for 2020 Audi Q7
ADAS coverage
This 2020 Audi Q7 page documents 6 ADAS systems, including Pre Sense Front / Pre Sense City, Active Lane Assist, Adaptive Cruise Control (ACC), and Blind Spot Detection (BSD) / Side Assist.
View ADAS dataCalibration triggers
Documented calibration triggers include Windshield Replacement, Front Bumper Repair or Replacement, Rear Bumper Repair or Replacement, and Any Collision. Use the ADAS tab for the full trigger list.
View triggersProgrammable modules
This page indexes 22 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and IPC coverage.
View modulesGateway and security
This page includes 5 gateway, immobilizer, or key-security records for this 2020 Audi Q7.
View securityCore Auto Logic capability
Core Auto Logic supports exact-year diagnostics, ADAS calibration, module programming, and security-access planning for the 2020 Audi Q7 using the documented systems and module data on this page.
Choose a sectionWhat changes on this exact year
Feature availability
Audi Pre Sense Front, Pre Sense City, Active Lane Assist, Adaptive Cruise, Blind - Standard; Immobilizer: MQB/MLB IMMO - Standard; Platform: MLB-Evo-4M - Confirmed
Driver-assist suite
Audi Pre Sense Front, Pre Sense City, Active Lane Assist, Adaptive Cruise, Blind Spot Detection Side Assist, Night Vision (optional SQ7/Prestige), 360 Surround View (Prestige standard)
VIN and build split
VIN pos 4-6 identifies model. Audi WMI: WAU, WA1, WAG. Position 4-6 = model code. Position 10 = model year code.
Infotainment context
Audi MMI; MMI Navigation Plus; Virtual Cockpit Plus; optional rear seat entertainment
Connectivity notes
Wireless CarPlay: Yes
Network and access
CAN: CAN bus (FlexRay for ADAS/zFAS on equipped builds); MOST for infotainment; LIN for body subsystems; 48V CAN for MHEV (SQ7 if equipped)
Tool access for this exact year
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
Factory scan, coding, and calibration access
VW ODIS-S / ODIS-E / Audi VAS 6154
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
OEM subscription required
Make-level OEM tool map plus exact-year gateway and ADAS fields.
ADAS scan, setup, and verification
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Tool subscription required
Service-level scanner-vendor source packet plus exact-year ADAS records.
Bench cloning and chip-level recovery
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Bench programmer source packet plus exact-year module/security records.
Choose a section to view data
SUPPORTED SYSTEMS
What we service on this vehicle
Documented module coverage for the 2020 Audi Q7. Counts reflect modules our techs have programmed or calibrated on this exact platform.
ADAS Calibration
6 modules documented
Forward camera, radar, surround-view and lane-keep recalibration after windshield, suspension or fascia work.
Open ADAS tabEngine / ECU Programming
4 modules documented
Powertrain reprogramming, calibration updates, replacement ECU configuration and security access.
Open Modules tabBCM / Body Programming
1 module documented
Body control module, gateway and accessory programming. Includes feature-bit reconfiguration.
Open Modules tabGateway / Security Access
3 modules documented
Secure gateway module identification, bypass workflow and security-access planning before programming.
Open Security tabTCU / Transmission
4 modules documented
Transmission control module reprogramming, adaptive learning reset and replacement TCM clone.
Open Modules tabSRS / Airbag Reset
4 modules documented
Crash-data clear, hard-code reset and replacement airbag module configuration.
Open Modules tabABS / Brake Module
1 module documented
ABS / EBCM bleed support, replacement module coding and yaw-rate sensor calibration.
Open Modules tabKey Security & Immobilizer
1 module documented
Immobilizer modules, key/fob types, add-key + all-keys-lost (AKL) capability and security overview.
Open Security tabIPC, SAS & Other Modules
4 modules documented
Instrument cluster cloning, steering angle sensor calibration and other supporting modules.
Open Modules tabConnectivity & Accessories
4 modules documented
Infotainment radio, surround view, remote start, trailer brake controller and other equipped systems.
Open Modules tabRecalibration Triggers
9 modules documented
Service events that require ADAS recalibration on this vehicle. Tap to see what triggers what.
Open ADAS tabNeed something not listed? Most undocumented modules can still be programmed.
Get a QuoteFeature availability 3
Audi Pre Sense Front, Pre Sense City, Active Lane Assist, Adaptive Cruise, Blind
StandardCalibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.
Immobilizer: MQB/MLB IMMO
StandardKey programming requires manufacturer-level tool access. Add key supported. All keys lost (AKL) supported.
Platform: MLB-Evo-4M
ConfirmedVerify platform code matches when cross-referencing part numbers across model years.
WHAT WE RESOLVE
Common issues on this vehicle
Common Audi Q7 issues we resolve on this platform: Pre Sense Front / Pre Sense City, Active Lane Assist, Adaptive Cruise Control (ACC), and Blind Spot Detection (BSD) / Side Assist recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - MLB-Evo-4M platform uses CAN bus (FlexRay for ADAS/zFAS on equipped builds); MOST for infotainment; LIN for body subsystems; 48V CAN for MHEV (SQ7 if equipped). Key programming and immobilizer faults - MQB/MLB IMMO immobilizer; all-keys-lost supported.
ADAS CALIBRATION MATRIX
ADAS systems on this vehicle
Audi Pre Sense Front, Pre Sense City, Active Lane Assist, Adaptive Cruise, Blind Spot Detection Side Assist, Night Vision (optional SQ7/Prestige), 360 Surround View (Prestige standard)
Scroll for part numbers and Details
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Pre Sense Front / Pre Sense City | Front Camera + Radar Fusion | Fused | Static | YES | 4M0-907-107-X | |
| Active Lane Assist | Forward Camera | Camera | Static | YES | 4M0-907-217-X | |
| Adaptive Cruise Control (ACC) | Front Radar | Radar | Static | YES | 4M0-907-561-X | |
| Blind Spot Detection (BSD) / Side Assist | Side Radar | Radar | Static + Dynamic | YES | - | |
| 360-Degree Surround View Camera | Surround Camera | Camera | Static | YES | - | |
| Night Vision (Infrared) | Infrared Camera | Camera | Static | YES | OPTIONAL - SQ7 AND UPPER TRIMS |
ADAS SYSTEM
YES Supported
Identification
- System type
- Module category
- Sensor location
Part Numbers
- OEM
- Alternative
Calibration & Triggers
- Calibration type
- Programming approach
- Requires PMI
- Trigger events
Technical Notes
- Chip / MCU
- Service notes
Need this calibrated?
Get a quote for ADAS calibration WHEN IS CALIBRATION REQUIRED?
Triggers for ADAS recalibration
Windshield Replacement Affected: Front Camera (Active Lane Assist), Pre Sense Front, Pre Sense City, AEB, Adaptive Cruise
ODIS-guided static calibration required after windshield R&R. ODIS work order and SVM coding mandatory. Approved OEM-equivalent glass only. Q7 windshield is larger than Q5 - confirm Q7-specific calibration targets if required.
Front Bumper Repair or Replacement Affected: Front Radar (ACC, Pre Sense, AEB), Night Vision camera (if equipped), front park sensors
Front radar static calibration via ODIS. Night Vision camera calibration required if equipped and disturbed. Inspect radar bracket. Park sensor adaptation via ODIS if replaced.
Rear Bumper Repair or Replacement Affected: BSD Side Assist, rear park sensors
Rear side radar calibration via ODIS if displaced or replaced. Rear park sensor adaptation via ODIS. Q7 rear bumper is larger - confirm all sensor positions after repair.
Any Collision Affected: ACU (SRS), zFAS ADAS ECU, front radar, front camera, all deployed airbags and pretensioners; 3rd-row airbag if equipped
Full ODIS scan mandatory across all rows and modules. ACU replace-only in most cases. Q7 3rd-row optional rear airbag adds complexity - confirm all deployments via ODIS. All deployed airbags and pretensioners replaced. ADAS recalibration required. SVM on all replaced modules.
Any Module Replacement Affected: All ODIS-coded modules - CEM, ECM, MHEV ECU, ACU, ABS, ADAS ECU, infotainment, cluster
ODIS SVM coding required for all replacements. Factory authorization for CEM, ECM, MHEV ECU, and AKL. SQ7 MHEV ECU requires ODIS + authorization - not compatible with 12V-only tools.
Mirror Replacement Affected: 360-degree surround camera (standard on Prestige), BSD mirror LED
Surround cameras integrated in mirrors - ODIS-guided static calibration with calibration targets required after mirror replacement. Confirm BSD LED function after reinstall.
Hatch or Tailgate Repair Affected: 360-degree surround camera rear view
Rear surround camera is integrated in hatch/tailgate handle area. ODIS static calibration required after any hatch repair that disturbs camera position.
Forward Radar Replacement
Radar module replacement requires alignment/calibration using ODIS-S.
BSM Sensor Replacement
Blind spot monitoring sensor replacement requires calibration using ODIS-S.
SRS MODULES
SRS Modules
Airbag Control Unit (ACU) 4M0-959-655
- PART
- 4M0-959-655
- LOCATION
- Under center console
- MFG
- Continental
- CHIP/MCU
- 95128
- NOTES
- Requires VCDS or ODIS for coding and adaptation. Gateway access control may require online login. Battery disconnect 90 seconds before removal.
Airbag Control Unit (ACU) 4M0-959-655-A
- PART
- 4M0-959-655-A
- LOCATION
- Under center console
- MFG
- Continental
- CHIP/MCU
- 95128
- NOTES
- Requires VCDS or ODIS for coding and adaptation. Gateway access control may require online login. Battery disconnect 90 seconds before removal.
Airbag Control Unit (ACU) 4M0-959-655-E
- PART
- 4M0-959-655-E
- LOCATION
- Under center console
- MFG
- Continental
- CHIP/MCU
- 95128
- NOTES
- Requires VCDS or ODIS for coding and adaptation. Gateway access control may require online login. Battery disconnect 90 seconds before removal.
Airbag Control Unit (ACU) 4M0-959-655-F
- PART
- 4M0-959-655-F
- LOCATION
- Under center console
- MFG
- Continental
- CHIP/MCU
- 95128
- NOTES
- Requires VCDS or ODIS for coding and adaptation. Gateway access control may require online login. Battery disconnect 90 seconds before removal.
ECU MODULES
ECU Modules
ECM - 2.0L EA888 TFSI (45 TFSI, 248hp) 4M0-906-259-X
- PART
- 4M0-906-259-X
- PROTOCOL
- ODIS SVM
- CODING
- Yes
- CLONE
- No
- CHIP/MCU
- Bosch MED17 / Continental SID
- NOTES
- ODIS + factory authorization required. SVM for adaptation. No standalone flash tools. Audi Genuine Parts or authorized remanufactured ECM only. Verify suffix via ODIS VIN.
ECM - 3.0L EA839 V6 TFSI (55 TFSI, 335hp) 4M0-907-115-X
- PART
- 4M0-907-115-X
- PROTOCOL
- ODIS SVM
- CODING
- Yes
- CLONE
- No
- CHIP/MCU
- Bosch MED17 / Continental SID
- NOTES
- ODIS + factory authorization required. SVM for adaptation. Verify suffix via ODIS VIN and engine code.
ECM - SQ7 4.0L V8 TFSI (500hp) 4M0-907-115-X (DIFFERENT SUFFIX)
- PART
- 4M0-907-115-X (DIFFERENT SUFFIX)
- PROTOCOL
- ODIS SVM
- CODING
- Yes
- CLONE
- No
- CHIP/MCU
- Bosch MED17 / Continental SID
- NOTES
- ODIS + factory authorization required. SQ7 V8 uses different ECM suffix - verify via ODIS VIN. SQ7 may include 48V MHEV system requiring separate MHEV ECU programming. Do not use 12V-only tools on MHEV variants. Audi Genuine Parts or authorized remanufactured ECM only.
MHEV ECU - SQ7 48V Mild Hybrid (if equipped)
- PROTOCOL
- ODIS SVM
- CODING
- Yes
- CLONE
- No
- CHIP/MCU
- Continental / Bosch MHEV controller
- NOTES
- Optional on SQ7 - 48V mild hybrid system. Separate MHEV ECU is not compatible with standard 12V-only diagnostic tools. ODIS + factory authorization required.
BCM MODULES
BCM Modules
Central Electronic Module (CEM) 4M0-937-084-X
- PART
- 4M0-937-084-X
- SECURITY
- AES Immobilizer
- CODING
- Yes
- CLONE
- No
- NOTES
- Immobilizer data in CEM; gateway ECU in same network. ODIS SVM required. Factory authorization required. New CEM coded to VIN via ODIS. Aftermarket tools cannot code this module. Q7-specific part numbers - do not substitute Q5 CEM.
TCU / TCM TRANSMISSION MODULES
TCU / TCM Transmission Modules
TCU - 0D5 DL501 7-Speed DSG 4M0927769
- PART
- 4M0927769
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- No
- CHIP/MCU
- Continental TC1797
- NOTES
- DSG relearn via VCDS/ODIS, ATF G052182A2, clutch adaptation required after programming
TCU - 0BK DL382 7-Speed DSG 4M0927769
- PART
- 4M0927769
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- No
- CHIP/MCU
- Continental TC1797
- NOTES
- DSG relearn via VCDS/ODIS, ATF G052182A2, clutch adaptation required after programming
TCU - 0B5 DL501 7-Speed DSG S-tronic 4M0927769
- PART
- 4M0927769
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- No
- CHIP/MCU
- Continental TC1797
- NOTES
- S-tronic DSG relearn via VCDS/ODIS, ATF G052182A2, performance clutch adaptation
TCU - 0C8 Tiptronic 8-Speed Auto 4M0927156
- PART
- 4M0927156
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- Yes
- CHIP/MCU
- ZF TC1797
- NOTES
- Basic setting adaptation via VCDS/ODIS, ATF G055162A2, shift point learning drive cycle
ABS / BRAKE MODULES
ABS / Brake Modules
ABS/ESC Module 4M0-614-517-X
- PART
- 4M0-614-517-X
- CLONE
- No
- NOTES
- ODIS required for adaptation and coding after replacement. Brake fluid bleed required - use ODIS automated bleed cycle. Verify part suffix via ODIS VIN. Q7-specific part numbers.
OTHER MODULES (IPC, SAS)
Other Modules (IPC, SAS)
Instrument Panel Cluster (IPC) 4M0 920 790 B
- PART
- 4M0 920 790 B
- CLONE
- Yes
- NOTES
- Virtual Cockpit Plus (12.3" TFT
Instrument Panel Cluster (IPC) 2020-2021 Q7 4M FACELIFT MLB E
- PART
- 2020-2021 Q7 4M FACELIFT MLB E
- CLONE
- Yes
- NOTES
- vo
Instrument Panel Cluster (IPC) 4M0 920 790 A
- PART
- 4M0 920 790 A
- CLONE
- Yes
- NOTES
- earlier revision
Steering Angle Sensor (SAS) 4M0 959 654 X
- PART
- 4M0 959 654 X
- CODING
- Yes
- NOTES
- Static calibration after replacement using scan tool with steering-angle reset routine. Vehicle on level ground, wheels straight.
CONNECTIVITY & ACCESSORIES
Connectivity & Accessories
Virtual Cockpit Plus (Digital Instrument Cluster)
- NOTES
- ODIS SVM coding required after replacement. VIN-coded. Standard on upper trims.
Rear Seat Entertainment System
- NOTES
- ODIS coding required if modules replaced.
Audi Phone Box / Wireless Charging
- NOTES
- ODIS coding required if module replaced.
GATEWAY / SECURITY MODULES
Gateway / Security Modules
Central Gateway Module
- MFG
- STMicroelectronics
- SECURITY
- VIN-locked (UDS)
- VIN LOCKED
- Yes
- CODING
- Yes
- CHIP/MCU
- ST10F269
- NOTES
- AMP Notes: Read/Write
Central Gateway Module
- MFG
- Renesas
- SECURITY
- VIN-locked (UDS)
- VIN LOCKED
- Yes
- CODING
- Yes
- CHIP/MCU
- D70F3380
- NOTES
- Compatibility label: A4/A5/Q5. BCM Notes: Read/Write
Central Gateway Module
- MFG
- Renesas
- SECURITY
- VIN-locked (UDS)
- VIN LOCKED
- Yes
- CODING
- Yes
- CHIP/MCU
- D70F3548 2018
- NOTES
- Compatibility label: A4L. Headlight modules Notes: Read/Write
KEY SECURITY & IMMOBILIZER
Key Security & Immobilizer
- System MQB/MLB IMMO
- Add Key Yes
- All Keys Lost Yes
Audi Kessy Gen 3+ AES encryption - ODIS + factory authorization required; no OBD pin extraction
IMMOBILIZER MODULES
Immobilizer Modules
Audi Kessy Gen 3+ (Keyless Entry Start System) INTEGRATED IN CEM (4M0-937-084-X)
- PART
- INTEGRATED IN CEM (4M0-937-084-X)
- SECURITY
- AES KESSY
- NOTES
- AES encryption - no OBD pin extraction possible. ODIS dealer-auth required for all key programming and AKL. Maximum 8 keys. Factory authorization mandatory. Aftermarket immobilizer tools are incompatible with Kessy Gen 3+.
KEY & FOB TYPES
Key & Fob Types
Proximity Smart Key Fob 4M0-837-220-X
- PART
- 4M0-837-220-X
- NOTES
- AES-encrypted Kessy Gen 3+. All key programming via ODIS with factory authorization. Minimum 2 working keys for add-key. AKL requires ODIS + Audi dealer security authorization. Max 8 keys per vehicle.
Replacement Notes
Yes
ARCHITECTURE & CONNECTIVITY
Architecture & Connectivity
- Body Construction
- MLB Evo unibody; 3-row full-size SUV; steel and aluminum composite construction
- OBD Protocol
- ISO 15765-4 CAN; UDS (ISO 14229); ODIS proprietary extensions
- CAN Architecture
- CAN bus (FlexRay for ADAS/zFAS on equipped builds); MOST for infotainment; LIN for body subsystems; 48V CAN for MHEV (SQ7 if equipped)
- Infotainment
- MMI Navigation Plus; Virtual Cockpit Plus; optional rear seat entertainment
- OTA Capable
- No
- Infotainment Name
- Audi MMI
- Wireless CarPlay
- Yes
- ECU/TCM Unlocking
- Contact us
- ECU/TCM Flashing
- Confirmed
Reviewed coverage: 2020 - 2.0L 40 TFSI (CYNB), 2.0L TFSI (CYRB), 3.0L 45 TDI CR (CVMD), 3.0L 45 TDI CR (DCPC), 3.0L 45 TDI CR (DEND), 3.0L TDI CR (CRTD), 3.0L TDI CR (CRTE), 3.0L TDI Ultra (CZZA), 3.0L TFSI quattro (CJTB), 3.0L V6 55TFSI 24v MHEV (DLZA).
Confirm the exact engine, ECU, and any prerequisite access method before service.
OPENPILOT / COMMA.AI
Openpilot Compatibility
Not Supported
Not supported - not in openpilot tree
Not in openpilot support tree as of April 2026. MLBevo Q7 not ported.
FREQUENTLY ASKED QUESTIONS
FAQ
How much does ADAS calibration cost for a 2020 Audi Q7?
ADAS calibration pricing for a 2020 Audi Q7 depends on which of its 6 documented systems need work after a repair. This vehicle is documented with Pre Sense Front / Pre Sense City, Active Lane Assist, Adaptive Cruise Control (ACC), Blind Spot Detection (BSD) / Side Assist, and 360-Degree Surround View Camera. We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.
Can you reset the airbag light on a 2020 Audi Q7?
Yes. The 2020 Audi Q7 uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: 4M0-959-655. Mobile diagnosis and programming are the active service path. Mail-in bench intake is temporarily unavailable. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.
What is needed after replacing the windshield on a 2020 Audi Q7?
After windshield replacement on a 2020 Audi Q7, Active Lane Assist and 360-Degree Surround View Camera rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in intake is temporarily unavailable.
How long does a 2020 Audi Q7 module service take?
Most 2020 Audi Q7 onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 22 programmable modules documented in our database (4 ECU, 1 BCM, 4 TCU, 1 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module intake is temporarily unavailable.
Do you cover the 2020 Audi Q7 on-site, or is this mail-in only?
We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, key programming, IMMO pairing, post-repair recoding, and supported module work). Mail-in module intake is temporarily unavailable. Quote the work and we will confirm the active service path for the 2020 Audi Q7. Do not ship a module unless support confirms next steps.
What kind of warranty do you offer on 2020 Audi Q7 programming?
Every programming, cloning, and calibration job on the 2020 Audi Q7 is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
Can you program a 2020 Audi Q7 with no working keys (all-keys-lost)?
Yes - all-keys-lost is supported on the 2020 Audi Q7. Immobilizer generation on this platform: MQB/MLB IMMO. Adding a key (with a working key already in hand) is also supported - typically faster and less expensive than an all-keys-lost reset. Submit the VIN and we will confirm the procedure and quote before scheduling.
Which modules on a 2020 Audi Q7 can you actually service?
We program, clone, repair, or replace the full programmable-module stack on a 2020 Audi Q7. For this vehicle our database documents:
- 4 engine control (ECU/PCM)
- 4 transmission control (TCU/TCM)
- 1 body control (BCM and related)
- 1 ABS / brake control (EBCM)
- 1 immobilizer / security
- 1 key & fob
- 3 instrument cluster (IPC)
- 1 steering angle sensor (SAS)
- 6 ADAS module
Infotainment on this platform: Audi MMI. Send the VIN and the operations performed and we will confirm support and pricing.
Additional Module Part Numbers
Additional OEM-sourced part numbers for the 2020 Audi Q7 covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.
- ADAS Module Part Numbers
- 4M0-907-107-X, 4M0-907-217-X, 4M0-907-561-X
- ECU / PCM Part Numbers
- 4M0-906-259-X, 248HP), 4M0-907-115-X, 335HP), 4M0-907-115-X (DIFFERENT SUFFIX)
- BCM / Body Module Part Numbers
- 4M0-937-084-X
- TCU / TCM Part Numbers
- 4M0927769, 4M0927156
- SRS / Airbag Module Part Numbers
- 4M0-959-655, 4M0-959-655-A, 4M0-959-655-E, 4M0-959-655-F
- ABS / EBCM Part Numbers
- 4M0907379
- Instrument Cluster (IPC) Part Numbers
- 4M0 920 790 B, 2020-2021 Q7 4M FACELIFT MLB EVO), 4M0 920 790 A
- Transmission Control Module (TCM) Part Numbers
- 4M0927769, 4M0927156
- Steering Angle Sensor (SAS) Part Numbers
- 4M0 959 654 X
Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.
Different trim or build?
Send your VIN and we'll confirm exact module support and pricing in the quote response.
Hit a security wall? We've got the keys.
1-year unlimited warranty on every flash and calibration.
Shared module fitment
Vehicles sharing modules with the 2020 Audi Q7
These vehicles use one or more of the same replacement modules indexed for this vehicle.