Choose a make, model and year, or start with a VIN.
ADAS calibration, module programming, and security relearns
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Choose a service to start your quote.
This 2023 Audi Q8 page documents 5 ADAS systems, including Pre Sense Front / AEB (zFAS Gen2), Adaptive Cruise Control / AI TJA Level 2, Side Assist / BSD with Exit Warning, and 360-Degree Surround View with Mirror Cameras.
View ADAS dataDocumented calibration triggers include Windshield Replacement, Front Bumper Repair or Replacement, Mirror Replacement, and Any Collision. Use the ADAS tab for the full trigger list.
View triggersThis page indexes 26 module reference records across SRS, ECU, BCM, TCU/TCM, ABS, and IPC categories. VIN-specific fitment and service eligibility require separate review.
View modulesThis page includes 2 gateway, immobilizer, or key-security records for this 2023 Audi Q8.
View securityCore Auto Logic supports exact-year diagnostics, ADAS calibration, module programming, and security-access planning for the 2023 Audi Q8 using the documented systems and module data on this page.
Choose a sectionVIN and build details determine exact service eligibility. A missing record does not mean we cannot help; ask about your vehicle.
VIN pos 4-6 identifies model. Audi WMI: WAU, WA1, WAG. Position 4-6 = model code. Position 10 = model year code.
Audi MMI
CarPlay: Yes / Android Auto: Yes
Pre Sense Front (dual camera), Active Lane Assist, Adaptive Cruise Control Predi - Available; Platform: MLB-Evo-4M - Confirmed
Pre Sense Front (dual camera), Active Lane Assist, Adaptive Cruise Control Predictive, AI TJA Level 2, Blind Spot Detection with Exit Warning, 360 Surround View, Matrix LED, Rear Axle Steering (SQ8/RS Q8)
VIN pos 4-6 identifies model. Audi WMI: WAU, WA1, WAG. Position 4-6 = model code. Position 10 = model year code.
Audi MMI; MMI Touch Response dual touchscreen (10.1-inch + 8.6-inch); Virtual Cockpit Plus 12.3-inch TFT
Wireless CarPlay: Yes; Wireless Android Auto: Yes
CAN: CAN (powertrain + chassis); FlexRay (zFAS Gen2); MOST150 (infotainment); LIN (body); 48V power bus
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
VW ODIS-S / ODIS-E / Audi VAS 6154
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Choose a section to view data
Reference entries for the 2023 Audi Q8 across possible configurations. Counts describe catalog entries. Exact fitment, installed equipment and service eligibility require review.
Equipped-system references and calibration triggers. Requirements depend on the vehicle, equipment and repair scope.
Open ADAS tabPowertrain module references and setup information. Confirm the exact hardware and service eligibility.
Open Modules tabBody control module references, variant restrictions and setup information. Support requires review of the exact unit.
Open Modules tabTransmission controller references and setup information. Programming, reset and cloning eligibility require review.
Open Modules tabAirbag module references and manufacturer-required procedures. Reset or replacement eligibility requires diagnosis and review.
Open Modules tabBrake control assembly references and OEM setup information. Procedures vary by vehicle and equipment.
Open Modules tabInstrument cluster, steering angle sensor and other module references. Confirm the required procedure and support for the exact unit.
Open Modules tabInfotainment radio, surround view, remote start, trailer brake controller and other equipped systems.
Open Modules tabRepair-event references. Confirm applicable calibration requirements from current OEM information for the exact vehicle.
Open ADAS tabNeed a module that is not listed? Request a review of its identity, service requirements and available options.
Get a QuoteCalibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.
Verify platform code matches when cross-referencing part numbers across model years.
Service considerations for the Audi Q8: Pre Sense Front / AEB (zFAS Gen2), Adaptive Cruise Control / AI TJA Level 2, Side Assist / BSD with Exit Warning, and 360-Degree Surround View with Mirror Cameras recalibration after windshield/bumper/suspension/CCM service. Replacement ECU/PCM, BCM, TCU or accessory modules may require programming or configuration. Follow current manufacturer instructions; service eligibility requires review of the exact VIN, module and fault.
Pre Sense Front (dual camera), Active Lane Assist, Adaptive Cruise Control Predictive, AI TJA Level 2, Blind Spot Detection with Exit Warning, 360 Surround View, Matrix LED, Rear Axle Steering (SQ8/RS Q8)
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Pre Sense Front / AEB (zFAS Gen2) | Front Camera + Radar Fusion | Fused | Static | YES | 4M0-907-107-X | |
| Adaptive Cruise Control / AI TJA Level 2 | Fused | Radar | Static | YES | 4M0-907-561-X | |
| Side Assist / BSD with Exit Warning | Side Radar | Radar | Static + Dynamic | YES | 4M0-907-541-X (L), 4M0-907-542-X (R) | |
| 360-Degree Surround View with Mirror Cameras | Surround Camera | Camera | Static | YES | 4M0-907-845-X (L), 4M0-907-846-X (R) | |
| Matrix LED Headlights | Active Lighting | lighting | None | YES | 4M0-941-031-X (L), 4M0-941-032-X (R) |
ADAS SYSTEM
Need this calibrated?
Get a quote for ADAS calibrationBoth cameras must pass our diagnostic software static target calibration. Work order first, SVM after pass. OEM glass only.
ARS510 static calibration using our diagnostic software. Park sensor adaptation if replaced.
our diagnostic software static calibration with targets. All 4 cameras must pass.
Full our diagnostic software scan. J234 likely replace-only. All airbags and pretensioners replaced. Full ADAS recalibration. SVM on all replaced modules.
our diagnostic software SVM required. Factory auth for J519, ECM, J518, AKL. Battery SOC adequate.
BSD radar alignment required after rear bumper R&R. Use ODIS-S.
Blind spot monitoring sensor replacement requires calibration using ODIS-S.
No matching records. Try a shorter part number or clear the filters. You can still request help if your module is not listed.
Not supported - not in openpilot tree
Not in openpilot support tree as of April 2026. MLBevo Q8 not ported.
ADAS calibration pricing for a 2023 Audi Q8 depends on which of its 5 documented systems need work after a repair. This vehicle is documented with Pre Sense Front / AEB (zFAS Gen2), Adaptive Cruise Control / AI TJA Level 2, Side Assist / BSD with Exit Warning, 360-Degree Surround View with Mirror Cameras, and Matrix LED Headlights. We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.
An airbag warning light on a 2023 Audi Q8 requires diagnosis before the appropriate repair can be determined. The procedure depends on the VIN, fault codes, collision history and installed components. Manufacturer instructions may require replacement of the control module or other components; clearing crash data alone does not establish that the restraint system is safe or fully operational. Send the VIN, current module part number and fault information so we can review service eligibility and confirm the next steps before quoting or shipping a module.
After windshield replacement on a 2023 Audi Q8, Pre Sense Front / AEB (zFAS Gen2) and 360-Degree Surround View with Mirror Cameras rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in module service is available nationwide for eligible module work.
Most 2023 Audi Q8 onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module service is available nationwide.
We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, post-repair recoding, and supported module work). Mail-in module service is available nationwide. Quote the work and we will confirm the active service path for the 2023 Audi Q8. Do not ship a module unless support confirms next steps.
Every programming, cloning, and calibration job on the 2023 Audi Q8 is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
Service options for a 2023 Audi Q8 require review of the VIN, exact module part number, vehicle equipment and faults. The catalog contains the following reference entries across possible configurations:
Infotainment on this platform: Audi MMI. Programming, cloning, repair and replacement eligibility are checked separately for each module. Send the VIN, current part number, fault codes and operations performed so we can confirm support and pricing.
Additional part references for the 2023 Audi Q8 covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These entries support module identification; each reference requires VIN-specific selection and service review.
Part references do not establish fitment or programming eligibility. Verify VIN-specific part selection, supersession and service requirements before ordering or scheduling. Ask Core Auto Logic to review the vehicle and module for available DFW mobile service options.
Send your VIN and we'll confirm exact module support and pricing in the quote response.
1-year unlimited warranty on every flash and calibration.
Matching catalog references
These pages list a matching part reference in the same module category. This does not confirm interchangeability. Verify the complete part number, suffix, VIN and build before selecting a replacement.
Factory diagnostic software is available. We confirm the appropriate software and supported procedure for your vehicle.
Get onsite help in Dallas-Fort Worth. Ask about same-day availability or a one-time remote session for eligible work.