VIN / Build Split
VIN pos 4-8 identifies model/body/engine. Toyota WMI: 2T1 (Camry), 4T1 (Corolla/RAV4), 5TD (Highlander). Position 7 = engine. Position 10 = model year code.
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
DFW Mobile Service
DFW Serving Dallas / Fort Worth
2015 Toyota Sienna Supported Services
2015 Toyota Sienna
ADAS calibration, module programming, and security relearns
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Technical snapshot
- Platform XL30 (3rd Gen, 2011-2020)
- CAN Architecture Toyota multi-CAN/LIN body and powertrain network; OBD2 DLC pins 6/14 CAN. Verify exact topology by VIN in Toyota TIS.
- Security Toyota Smart Entry - AES-128 DST-AES transponder; no OBD pin extraction; AKL requires TIS dealer authorization; max 8 keys; 315 MHz RF (US market)
OVERVIEW
Expert ADAS calibration, module programming, and diagnostic recovery for the 2015 Toyota Sienna. On this vehicle we cover documented systems include Forward Camera (as equipped), Forward Radar (as equipped), and Blind Spot Monitor Sensor - Left (BSM), this XL30 (3rd Gen, 2011-2020) platform vehicle, Toyota Smart Key / Transponder immobilizer support. Mobile across the DFW Metroplex; mail-in module work is temporarily unavailable.
Platform
XL30 (3rd Gen, 2011-2020)
Production
2004-present
Trim Levels
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Drivetrain
FWD / AWD
Engine
-
CAN Speed
Toyota multi-CAN/LIN body and powertrain network; OBD2 DLC pins 6/14 CAN. Verify exact topology by VIN in Toyota TIS.
YEAR-SPECIFIC NOTES
Exact-year service summary for 2015 Toyota Sienna
ADAS coverage
This 2015 Toyota Sienna page documents 7 ADAS systems, including Forward Camera (as equipped), Forward Radar (as equipped), Blind Spot Monitor Sensor - Left (BSM), and Blind Spot Monitor Sensor - Right (BSM).
View ADAS dataCalibration triggers
Documented calibration triggers include Windshield Replacement, Front Bumper Repair or Replacement, Rear Bumper Repair or Replacement, and Any Collision. Use the ADAS tab for the full trigger list.
View triggersProgrammable modules
This page indexes 30 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and IPC coverage.
View modulesGateway and security
This page includes 2 gateway, immobilizer, or key-security records for this 2015 Toyota Sienna.
View securityCore Auto Logic capability
Core Auto Logic supports exact-year diagnostics, ADAS calibration, module programming, and security-access planning for the 2015 Toyota Sienna using the documented systems and module data on this page.
Choose a sectionWhat changes on this exact year
Feature availability
Driver-assist equipment (as equipped) - Verify by VIN; Immobilizer: Toyota Smart Key / Transponder - Standard; Platform: XL30 Sienna - Confirmed
Driver-assist suite
Pre-TSS-P Sienna. Driver-assist equipment varies by trim and market; verify PCS/DRCC/LDA/AHB, BSM/RCTA, and rear camera equipment by VIN in Toyota TIS.
VIN and build split
VIN pos 4-8 identifies model/body/engine. Toyota WMI: 2T1 (Camry), 4T1 (Corolla/RAV4), 5TD (Highlander). Position 7 = engine. Position 10 = model year code.
Infotainment context
Toyota Entune/audio system by trim; verify head-unit generation, navigation/JBL equipment, and connected-service support by VIN before replacement or programming.
Network and access
CAN: Toyota multi-CAN/LIN body and powertrain network; OBD2 DLC pins 6/14 CAN. Verify exact topology by VIN in Toyota TIS.
Tool access for this exact year
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
Factory scan, coding, and calibration access
Toyota Techstream / Toyota GTS+
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
OEM subscription required
Make-level OEM tool map plus exact-year gateway and ADAS fields.
ADAS scan, setup, and verification
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Tool subscription required
Service-level scanner-vendor source packet plus exact-year ADAS records.
Bench cloning and chip-level recovery
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Bench programmer source packet plus exact-year module/security records.
Choose a section to view data
SUPPORTED SYSTEMS
What we service on this vehicle
Documented module coverage for the 2015 Toyota Sienna. Counts reflect modules our techs have programmed or calibrated on this exact platform.
ADAS Calibration
7 modules documented
Forward camera, radar, surround-view and lane-keep recalibration after windshield, suspension or fascia work.
Open ADAS tabEngine / ECU Programming
2 modules documented
Powertrain reprogramming, calibration updates, replacement ECU configuration and security access.
Open Modules tabBCM / Body Programming
5 modules documented
Body control module, gateway and accessory programming. Includes feature-bit reconfiguration.
Open Modules tabTCU / Transmission
1 module documented
Transmission control module reprogramming, adaptive learning reset and replacement TCM clone.
Open Modules tabSRS / Airbag Reset
9 modules documented
Crash-data clear, hard-code reset and replacement airbag module configuration.
Open Modules tabABS / Brake Module
5 modules documented
ABS / EBCM bleed support, replacement module coding and yaw-rate sensor calibration.
Open Modules tabKey Security & Immobilizer
1 module documented
Immobilizer modules, key/fob types, add-key + all-keys-lost (AKL) capability and security overview.
Open Security tabIPC, SAS & Other Modules
4 modules documented
Instrument cluster cloning, steering angle sensor calibration and other supporting modules.
Open Modules tabConnectivity & Accessories
4 modules documented
Infotainment radio, surround view, remote start, trailer brake controller and other equipped systems.
Open Modules tabRecalibration Triggers
7 modules documented
Service events that require ADAS recalibration on this vehicle. Tap to see what triggers what.
Open ADAS tabNeed something not listed? Most undocumented modules can still be programmed.
Get a QuoteFeature availability 3
Driver-assist equipment (as equipped)
Verify by VINVerify PCS/DRCC/LDA/AHB, BSM/RCTA, and rear camera equipment by VIN in Toyota TIS before calibration or module replacement.
Immobilizer: Toyota Smart Key / Transponder
StandardKey programming requires manufacturer-level tool access. Add key supported. All keys lost (AKL) supported.
Platform: XL30 Sienna
ConfirmedThird-generation Sienna platform. Verify part compatibility by VIN and do not use fourth-generation hybrid assumptions.
WHAT WE RESOLVE
Common issues on this vehicle
Common Toyota Sienna issues we resolve on this platform: Forward Camera (as equipped), Forward Radar (as equipped), Blind Spot Monitor Sensor - Left (BSM), and Blind Spot Monitor Sensor - Right (BSM) recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - XL30 (3rd Gen, 2011-2020) platform uses Toyota multi-CAN/LIN body and powertrain network; OBD2 DLC pins 6/14 CAN. Verify exact topology by VIN in Toyota TIS.. Key programming and immobilizer faults - Toyota Smart Key / Transponder immobilizer; all-keys-lost supported.
ADAS CALIBRATION MATRIX
ADAS systems on this vehicle
Pre-TSS-P Sienna. Driver-assist equipment varies by trim and market; verify PCS/DRCC/LDA/AHB, BSM/RCTA, and rear camera equipment by VIN in Toyota TIS.
Scroll for part numbers and Details
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Forward Camera (as equipped) | Forward Camera | Camera | Static | YES | - | |
| Forward Radar (as equipped) | Front Radar | Radar | Static | YES | - | |
| Blind Spot Monitor Sensor - Left (BSM) | Side Radar | Radar | Static + Dynamic | YES | ~88162-08020 | |
| Blind Spot Monitor Sensor - Right (BSM) | Side Radar | Radar | Static + Dynamic | YES | ~88161-08020 | |
| Rear Cross Traffic Alert (RCTA) | Side Radar | Radar | None | YES | - | |
| Automatic High Beams (as equipped) | Forward Camera | Camera | Static | YES | - | |
| Rear View Camera | Rear Camera | Camera | Static | YES | ~86790-08020 (VERIFY SUFFIX VIA TIS) |
ADAS SYSTEM
YES Supported
Identification
- System type
- Module category
- Sensor location
Part Numbers
- OEM
- Alternative
Calibration & Triggers
- Calibration type
- Programming approach
- Requires PMI
- Trigger events
Technical Notes
- Chip / MCU
- Service notes
Need this calibrated?
Get a quote for ADAS calibration WHEN IS CALIBRATION REQUIRED?
Triggers for ADAS recalibration
Windshield Replacement Affected: Forward camera / PCS-LDA systems as equipped
Use Toyota TIS and the repair manual for the exact camera calibration target, vehicle setup, DTC clear, and road test after windshield, bracket, or camera work. Do not apply newer-generation target data to this generation.
Front Bumper Repair or Replacement Affected: Forward radar / DRCC-PCS systems as equipped
Verify whether forward radar is equipped by VIN. Use Toyota TIS for radar initialization or aiming and pair with camera calibration when both systems are disturbed.
Rear Bumper Repair or Replacement Affected: BSM Sensors, RCTA
BSM Techstream init for any disturbed sensor. Road verify at speed.
Any Collision Affected: SRS ECU, all ADAS sensors, deployed systems
Full Techstream scan. SRS: replace if DTC 51-xx. Calibrate all disturbed ADAS before delivery.
ECM or TCM Replacement Affected: ECM, TCM, Immobilizer
Use Toyota TIS and Techstream for VIN registration, immobilizer synchronization as equipped, ECM/TCM initialization, and calibration or adaptive relearn after replacement. This gas-generation row does not use newer hybrid-generation high-voltage control-module procedures.
Smart Key ECU Replacement Affected: All registered keys
All keys erased. TIS authorization for AKL. All keys present for re-registration.
Wheel Alignment / Suspension Work Affected: Steering Angle Sensor
SAS zero-point via Techstream. Drive straight 35+ mph after reset.
SRS MODULES
SRS Modules
SRS Control Unit x9
89170-08130 Under center console
- PART
- 89170-08130
- LOCATION
- Under center console
- MFG
- Denso
- NOTES
- Requires Techstream or J2534 for SRS reset. DTC B1650 common post-crash. Battery disconnect and 90-second wait before removal.
89170-08140 Under center console
- PART
- 89170-08140
- LOCATION
- Under center console
- MFG
- Denso
- NOTES
- Requires Techstream or J2534 for SRS reset. DTC B1650 common post-crash. Battery disconnect and 90-second wait before removal.
89170-08150 Under center console
- PART
- 89170-08150
- LOCATION
- Under center console
- MFG
- Denso
- NOTES
- Requires Techstream or J2534 for SRS reset. DTC B1650 common post-crash. Battery disconnect and 90-second wait before removal.
89170-08130 Under center console
- PART
- 89170-08130
- LOCATION
- Under center console
- MFG
- Denso
- NOTES
- Requires Techstream or J2534 for SRS reset. DTC B1650 common post-crash. Battery disconnect and 90-second wait before removal.
89170-08140 Under center console
- PART
- 89170-08140
- LOCATION
- Under center console
- MFG
- Denso
- NOTES
- Requires Techstream or J2534 for SRS reset. DTC B1650 common post-crash. Battery disconnect and 90-second wait before removal.
89170-08150 Under center console
- PART
- 89170-08150
- LOCATION
- Under center console
- MFG
- Denso
- NOTES
- Requires Techstream or J2534 for SRS reset. DTC B1650 common post-crash. Battery disconnect and 90-second wait before removal.
89170-08130 Under center console
- PART
- 89170-08130
- LOCATION
- Under center console
- MFG
- Denso
- NOTES
- Requires Techstream or J2534 for SRS reset. DTC B1650 common post-crash. Battery disconnect and 90-second wait before removal.
89170-08140 Under center console
- PART
- 89170-08140
- LOCATION
- Under center console
- MFG
- Denso
- NOTES
- Requires Techstream or J2534 for SRS reset. DTC B1650 common post-crash. Battery disconnect and 90-second wait before removal.
89170-08150 Under center console
- PART
- 89170-08150
- LOCATION
- Under center console
- MFG
- Denso
- NOTES
- Requires Techstream or J2534 for SRS reset. DTC B1650 common post-crash. Battery disconnect and 90-second wait before removal.
ECU MODULES
ECU Modules
ECM - 3.5L gasoline V6 89661-08060 (VERIFY BY VIN IN TOYOTA TIS)
- PART
- 89661-08060 (VERIFY BY VIN IN TOYOTA TIS)
- PROTOCOL
- OBD Programming Port
- CODING
- Yes
- CLONE
- No
- CHIP/MCU
- Denso / Toyota - verify by VIN
- NOTES
- Verify engine, emissions family, and calibration by VIN in Toyota TIS. Use Techstream for ECM programming, VIN registration, immobilizer synchronization as equipped, and throttle/idle initialization after replacement.
TCM - six-speed automatic (if separate/equipped)
- PROTOCOL
- OBD Programming Port
- CODING
- Yes
- CLONE
- No
- CHIP/MCU
- Denso / Toyota - verify by VIN
- NOTES
- Follow the Toyota TIS procedure for the exact transmission and calibration. Run initialization, adaptive reset, fluid-temperature checks, and road-test relearn as required by the repair manual.
BCM MODULES
BCM Modules
Body ECU (Smart Entry / Body Integration) ~89220-08100
- PART
- ~89220-08100
- SECURITY
- AES-128 DST-AES
- CODING
- Yes
- CLONE
- No
- NOTES
- Techstream initialization. Smart Key re-registration - all keys must be present.
Smart Key ECU ~89990-08100
- PART
- ~89990-08100
- SECURITY
- AES-128 DST-AES
- CODING
- Yes
- CLONE
- No
- NOTES
- All keys erased on replacement. TIS authorization required. All keys present for Techstream re-registration. Max 8 keys.
Power Sliding Door ECU (Left) ~89640-08
- PART
- ~89640-08
- SECURITY
- standard
- CODING
- Yes
- CLONE
- No
- NOTES
- Techstream PSD init. Force/travel limit adjustment. Pinch detection verify.
Power Sliding Door ECU (Right) ~89640-08 R (VERIFY VIA TIS)
- PART
- ~89640-08 R (VERIFY VIA TIS)
- SECURITY
- standard
- CODING
- Yes
- CLONE
- No
- NOTES
- Same as left PSD ECU.
Power Liftgate ECU ~89640-08 L (VERIFY VIA TIS)
- PART
- ~89640-08 L (VERIFY VIA TIS)
- SECURITY
- standard
- CODING
- Yes
- CLONE
- No
- NOTES
- Techstream PLG init. Height limit set. Obstacle detection verify.
TCU / TCM TRANSMISSION MODULES
TCU / TCM Transmission Modules
TCU - U760E 6-Speed Auto 89530-08
- PART
- 89530-08
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- Yes
- CHIP/MCU
- Renesas SH7058
- NOTES
- Requires Toyota TIS with J2534 tool, ATF WS fluid, shift relearn via test drive procedure, VIN coding mandatory
ABS / BRAKE MODULES
ABS / Brake Modules
Skid Control ECU (ABS/VSC/TRAC) - Hybrid ~89540-08
- PART
- ~89540-08
- CLONE
- No
- NOTES
- Techstream ABS/VSC init. SAS zero-point calibration required. Hybrid regen coordination verify.
Wheel Speed Sensor - Front Left ~89542-08
- PART
- ~89542-08
- CLONE
- No
- NOTES
- Active Hall-effect. DTC clear + road test 15+ mph.
Wheel Speed Sensor - Front Right ~89543-08
- PART
- ~89543-08
- CLONE
- No
- NOTES
- Same as front left.
Wheel Speed Sensor - Rear Left ~89545-08
- PART
- ~89545-08
- CLONE
- No
- NOTES
- E-Four proximity - verify no magnetic interference post-install.
Wheel Speed Sensor - Rear Right ~89544-08
- PART
- ~89544-08
- CLONE
- No
- NOTES
- Same as rear left.
OTHER MODULES (IPC, SAS)
Other Modules (IPC, SAS)
Instrument Panel Cluster (IPC) 83800-08080
- PART
- 83800-08080
- CLONE
- Yes
- NOTES
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Instrument Panel Cluster (IPC) 83800-08090
- PART
- 83800-08090
- CLONE
- Yes
- NOTES
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Steering Angle Sensor (SAS)
- CODING
- Yes
- NOTES
- INTEGRATED (clock spring / steering column module
Steering Angle Sensor (SAS)
- CODING
- Yes
- NOTES
- cross-year extension)
CONNECTIVITY & ACCESSORIES
Connectivity & Accessories
Display Audio - 9 inch (LE / XLE / XSE) ~86140-08
- PART
- ~86140-08
- NOTES
- Wireless CarPlay and Android Auto. OTA capable. Techstream audio check.
Display Audio - 12.3 inch (Platinum) ~86140-08 P (VERIFY VIA TIS)
- PART
- ~86140-08 P (VERIFY VIA TIS)
- NOTES
- Platinum 12.3 inch. JBL. Wireless CarPlay/Android Auto. Techstream integration check.
Wireless Charger (XLE / XSE / Platinum) ~86907-08
- PART
- ~86907-08
- NOTES
- Qi charging. Verify function after replacement.
Rear Seat Entertainment - 11.6 inch (Platinum) ~86680-08
- PART
- ~86680-08
- NOTES
- Dual rear displays. Techstream DTC check.
KEY SECURITY & IMMOBILIZER
Key Security & Immobilizer
- System Toyota Smart Key / Transponder
- Add Key Yes
- All Keys Lost Yes
Toyota Smart Entry - AES-128 DST-AES transponder; no OBD pin extraction; AKL requires TIS dealer authorization; max 8 keys; 315 MHz RF (US market)
IMMOBILIZER MODULES
Immobilizer Modules
Toyota Immobilizer - Smart Key ECU (AES-128) ~89990-08100
- PART
- ~89990-08100
- SECURITY
- AES-128 DST-AES
- NOTES
- Gen 4. No OBD pin extraction. AKL: TIS dealer authorization. Techstream only. Max 8 keys. TOY48 blade.
KEY & FOB TYPES
Key & Fob Types
Proximity Smart Key Fob ~89904-08010
- PART
- ~89904-08010
- NOTES
- AES-128 DST-AES. Techstream only. Add key: 1 working key minimum. AKL: TIS authorization. TOY48 blade. CR2032. Max 8 keys.
Replacement Notes
Toyota Smart Key / Transponder system. Techstream required for key programming and module replacement. No obd pin extraction; akl supported.
ARCHITECTURE & CONNECTIVITY
Architecture & Connectivity
- Body Construction
- XL30 unibody minivan platform - verify structural repair procedures by VIN in Toyota TIS
- OBD Protocol
- ISO 15765-4 CAN (500 kbps)
- CAN Architecture
- Toyota multi-CAN/LIN body and powertrain network; OBD2 DLC pins 6/14 CAN. Verify exact topology by VIN in Toyota TIS.
- Infotainment
- Toyota Entune/audio system by trim; verify head-unit generation, navigation/JBL equipment, and connected-service support by VIN before replacement or programming.
- OTA Capable
- No
- ECU/TCM Unlocking
- Contact us
- ECU/TCM Flashing
- Confirmed
Reviewed coverage: 2015 - 3.5L V6 VVT-i (2GR-FE).
Confirm the exact engine, ECU, and any prerequisite access method before service.
FREQUENTLY ASKED QUESTIONS
FAQ
How much does ADAS calibration cost for a 2015 Toyota Sienna?
ADAS calibration pricing for a 2015 Toyota Sienna depends on which of its 7 documented systems need work after a repair. This vehicle is documented with Forward Camera (as equipped), Forward Radar (as equipped), Blind Spot Monitor Sensor - Left (BSM), Blind Spot Monitor Sensor - Right (BSM), and Rear Cross Traffic Alert (RCTA). We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.
Can you reset the airbag light on a 2015 Toyota Sienna?
Yes. The 2015 Toyota Sienna uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: 89170-08130. Mobile diagnosis and programming are the active service path. Mail-in bench intake is temporarily unavailable. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.
What is needed after replacing the windshield on a 2015 Toyota Sienna?
After windshield replacement on a 2015 Toyota Sienna, Forward Camera (as equipped), Forward Radar (as equipped), and Rear View Camera rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in intake is temporarily unavailable.
How long does a 2015 Toyota Sienna module service take?
Most 2015 Toyota Sienna onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 22 programmable modules documented in our database (2 ECU, 5 BCM, 1 TCU, 5 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module intake is temporarily unavailable.
Do you cover the 2015 Toyota Sienna on-site, or is this mail-in only?
We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, key programming, IMMO pairing, post-repair recoding, and supported module work). Mail-in module intake is temporarily unavailable. Quote the work and we will confirm the active service path for the 2015 Toyota Sienna. Do not ship a module unless support confirms next steps.
What kind of warranty do you offer on 2015 Toyota Sienna programming?
Every programming, cloning, and calibration job on the 2015 Toyota Sienna is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
Can you program a 2015 Toyota Sienna with no working keys (all-keys-lost)?
Yes - all-keys-lost is supported on the 2015 Toyota Sienna. Immobilizer generation on this platform: Toyota Smart Key / Transponder. Adding a key (with a working key already in hand) is also supported - typically faster and less expensive than an all-keys-lost reset. Submit the VIN and we will confirm the procedure and quote before scheduling.
Which modules on a 2015 Toyota Sienna can you actually service?
We program, clone, repair, or replace the full programmable-module stack on a 2015 Toyota Sienna. For this vehicle our database documents:
- 2 engine control (ECU/PCM)
- 1 transmission control (TCU/TCM)
- 5 body control (BCM and related)
- 5 ABS / brake control (EBCM)
- 1 immobilizer / security
- 1 key & fob
- 2 instrument cluster (IPC)
- 2 steering angle sensor (SAS)
- 7 ADAS module
Send the VIN and the operations performed and we will confirm support and pricing.
Additional Module Part Numbers
Additional OEM-sourced part numbers for the 2015 Toyota Sienna covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.
- ADAS Module Part Numbers
- 88210-08020 (DENSO 77GHZ FWD RADAR, 86790-08030 (DENSO MONO CAMERA PCS)
- ECU / PCM Part Numbers
- 89661-08060 (3.5L 2GR-FE V6, XL30 SIENNA)
- BCM / Body Module Part Numbers
- ~89220-08100, ~89990-08100, ~89640-08, ~89640-08 R (VERIFY VIA TIS), ~89640-08 L (VERIFY VIA TIS)
- TCU / TCM Part Numbers
- 89530-08
- SRS / Airbag Module Part Numbers
- 89170-08130, 89170-08140, 89170-08150
- ABS / EBCM Part Numbers
- 44050-08020 (FWD), 44050-08030 (AWD)
- Instrument Cluster (IPC) Part Numbers
- 83800-08080, 83800-08090
- Transmission Control Module (TCM) Part Numbers
- 89530-08
Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.
Different trim or build?
Send your VIN and we'll confirm exact module support and pricing in the quote response.
Hit a security wall? We've got the keys.
1-year unlimited warranty on every flash and calibration.
Shared module fitment
Vehicles sharing modules with the 2015 Toyota Sienna
These vehicles use one or more of the same replacement modules indexed for this vehicle.