VIN / Build Split
VIN pos 4-8 identifies model/body/engine. Toyota WMI: 2T1 (Camry), 4T1 (Corolla/RAV4), 5TD (Highlander). Position 7 = engine. Position 10 = model year code.
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
DFW Mobile Service
DFW Serving Dallas / Fort Worth
2025 Toyota Sienna Supported Services
2025 Toyota Sienna
ADAS calibration, module programming, and security relearns
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Technical snapshot
- Platform TNGA-K (XL40, 4th Gen Minivan)
- CAN Architecture Multi-CAN bus: PT-CAN (powertrain/HV), Body-CAN, AVC-LAN (multimedia); OBD2 DLC Pin 6/14 CAN 500 kbps
- Security Toyota Smart Entry - AES-128 DST-AES transponder; no OBD pin extraction; AKL requires TIS dealer authorization; max 8 keys; 315 MHz RF (US market)
OVERVIEW
Expert ADAS calibration, module programming, and diagnostic recovery for the 2025 Toyota Sienna. On this vehicle we cover documented systems include Forward Camera (Monocular), Forward Radar (77GHz), and Blind Spot Monitor Sensor - Left (BSM), this TNGA-K (XL40, 4th Gen Minivan) platform vehicle, Toyota Smart Key / Transponder immobilizer support, Toyota Audio Multimedia infotainment programming. Mobile across the DFW Metroplex; mail-in module work is temporarily unavailable.
Platform
TNGA-K (XL40, 4th Gen Minivan)
Production
2004-present
Trim Levels
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Drivetrain
FWD / AWD
Engine
-
CAN Speed
Multi-CAN bus: PT-CAN (powertrain/HV), Body-CAN, AVC-LAN (multimedia); OBD2 DLC Pin 6/14 CAN 500 kbps
YEAR-SPECIFIC NOTES
Infotainment
Toyota Audio Multimedia
Wireless Support
CarPlay: Yes / Android Auto: Yes
Exact-year service summary for 2025 Toyota Sienna
ADAS coverage
This 2025 Toyota Sienna page documents 8 ADAS systems, including Forward Camera (Monocular), Forward Radar (77GHz), Blind Spot Monitor Sensor - Left (BSM), and Blind Spot Monitor Sensor - Right (BSM).
View ADAS dataCalibration triggers
Documented calibration triggers include Windshield Replacement, Front Bumper Repair or Replacement, Rear Bumper Repair or Replacement, and Any Collision. Use the ADAS tab for the full trigger list.
View triggersProgrammable modules
This page indexes 24 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and IPC coverage.
View modulesGateway and security
This page includes 2 gateway, immobilizer, or key-security records for this 2025 Toyota Sienna.
View securityCore Auto Logic capability
Core Auto Logic supports exact-year diagnostics, ADAS calibration, module programming, and security-access planning for the 2025 Toyota Sienna using the documented systems and module data on this page.
Choose a sectionWhat changes on this exact year
Feature availability
Toyota Safety Sense 2.5+ (Toyota Safety Sense 2.5 (TSS 2.5)+): Pre-Collision Sys - Available; Immobilizer: Toyota Smart Key / Transponder - Standard; Platform: TNGA-K (XL40, 4th Gen Minivan) - Confirmed
Driver-assist suite
Toyota Safety Sense 2.5+ (Toyota Safety Sense 2.5 (TSS 2.5)+): Pre-Collision System with Intersection Support, Enhanced Lane Departure Alert/Lane Tracing Assist, Proactive Driving Assist, Lane Change Assist, Emergency Steering Assist, Automatic High Beams
VIN and build split
VIN pos 4-8 identifies model/body/engine. Toyota WMI: 2T1 (Camry), 4T1 (Corolla/RAV4), 5TD (Highlander). Position 7 = engine. Position 10 = model year code.
Infotainment context
Toyota Audio Multimedia; Toyota Audio Multimedia 9" (LE/XLE/XSE) or 12.3" (Platinum); Wireless Apple CarPlay; Wireless Android Auto; Toyota Connected Services
Connectivity notes
Wireless CarPlay: Yes; Wireless Android Auto: Yes
Network and access
CAN: Multi-CAN bus: PT-CAN (powertrain/HV), Body-CAN, AVC-LAN (multimedia); OBD2 DLC Pin 6/14 CAN 500 kbps
Tool access for this exact year
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
Factory scan, coding, and calibration access
Toyota Techstream / Toyota GTS+
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
OEM subscription required
Make-level OEM tool map plus exact-year gateway and ADAS fields.
ADAS scan, setup, and verification
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Tool subscription required
Service-level scanner-vendor source packet plus exact-year ADAS records.
Bench cloning and chip-level recovery
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Bench programmer source packet plus exact-year module/security records.
Choose a section to view data
SUPPORTED SYSTEMS
What we service on this vehicle
Documented module coverage for the 2025 Toyota Sienna. Counts reflect modules our techs have programmed or calibrated on this exact platform.
ADAS Calibration
8 modules documented
Forward camera, radar, surround-view and lane-keep recalibration after windshield, suspension or fascia work.
Open ADAS tabEngine / ECU Programming
4 modules documented
Powertrain reprogramming, calibration updates, replacement ECU configuration and security access.
Open Modules tabBCM / Body Programming
5 modules documented
Body control module, gateway and accessory programming. Includes feature-bit reconfiguration.
Open Modules tabTCU / Transmission
1 module documented
Transmission control module reprogramming, adaptive learning reset and replacement TCM clone.
Open Modules tabSRS / Airbag Reset
3 modules documented
Crash-data clear, hard-code reset and replacement airbag module configuration.
Open Modules tabABS / Brake Module
5 modules documented
ABS / EBCM bleed support, replacement module coding and yaw-rate sensor calibration.
Open Modules tabKey Security & Immobilizer
1 module documented
Immobilizer modules, key/fob types, add-key + all-keys-lost (AKL) capability and security overview.
Open Security tabIPC, SAS & Other Modules
2 modules documented
Instrument cluster cloning, steering angle sensor calibration and other supporting modules.
Open Modules tabConnectivity & Accessories
4 modules documented
Infotainment radio, surround view, remote start, trailer brake controller and other equipped systems.
Open Modules tabRecalibration Triggers
11 modules documented
Service events that require ADAS recalibration on this vehicle. Tap to see what triggers what.
Open ADAS tabNeed something not listed? Most undocumented modules can still be programmed.
Get a QuoteFeature availability 3
Toyota Safety Sense 2.5+ (Toyota Safety Sense 2.5 (TSS 2.5)+): Pre-Collision Sys
AvailableCalibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.
Immobilizer: Toyota Smart Key / Transponder
StandardKey programming requires manufacturer-level tool access. Add key supported. All keys lost (AKL) supported.
Platform: TNGA-K (XL40, 4th Gen Minivan)
ConfirmedVerify platform code matches when cross-referencing part numbers across model years.
WHAT WE RESOLVE
Common issues on this vehicle
Common Toyota Sienna issues we resolve on this platform: Forward Camera (Monocular), Forward Radar (77GHz), Blind Spot Monitor Sensor - Left (BSM), and Blind Spot Monitor Sensor - Right (BSM) recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - TNGA-K (XL40, 4th Gen Minivan) platform uses Multi-CAN bus: PT-CAN (powertrain/HV), Body-CAN, AVC-LAN (multimedia); OBD2 DLC Pin 6/14 CAN 500 kbps. Key programming and immobilizer faults - Toyota Smart Key / Transponder immobilizer; all-keys-lost supported.
ADAS CALIBRATION MATRIX
ADAS systems on this vehicle
Toyota Safety Sense 2.5+ (Toyota Safety Sense 2.5 (TSS 2.5)+): Pre-Collision System with Intersection Support, Enhanced Lane Departure Alert/Lane Tracing Assist, Proactive Driving Assist, Lane Change Assist, Emergency Steering Assist, Automatic High Beams
Scroll for part numbers and Details
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Forward Camera (Monocular) | Forward Camera | Camera | Static | YES | ~86790-08070 (VERIFY 2024 SUFFIX VIA TIS) | |
| Forward Radar (77GHz) | Front Radar | Radar | Static | YES | ~88210-08050 (VERIFY 2024 SUFFIX VIA TIS) | |
| Blind Spot Monitor Sensor - Left (BSM) | Side Radar | Radar | Static + Dynamic | YES | ~88162-08020 (VERIFY 2024 SUFFIX VIA TIS) | |
| Blind Spot Monitor Sensor - Right (BSM) | Side Radar | Radar | Static + Dynamic | YES | ~88161-08020 (VERIFY 2024 SUFFIX VIA TIS) | |
| Rear Cross Traffic Alert (RCTA) | Side Radar | Radar | None | YES | - | |
| Proactive Driving Assist (PDA) | Fused (Radar + Camera) | Fused | Static | YES | - | |
| Automatic High Beams (AHB) | Forward Camera | Camera | Static | YES | (INTEGRATED TSS 2.5 | |
| Rear View Camera | Rear Camera | Camera | Static | YES | ~86790-08020 (VERIFY 2024 SUFFIX VIA TIS) |
ADAS SYSTEM
YES Supported
Identification
- System type
- Module category
- Sensor location
Part Numbers
- OEM
- Alternative
Calibration & Triggers
- Calibration type
- Programming approach
- Requires PMI
- Trigger events
Technical Notes
- Chip / MCU
- Service notes
Need this calibrated?
Get a quote for ADAS calibration WHEN IS CALIBRATION REQUIRED?
Triggers for ADAS recalibration
Windshield Replacement Affected: TSS 2.5+ Forward Camera (PCS, LDA, LTA, PDA, ESA, LCA, AHB, RCC)
Static calibration via Techstream. 3.0 m target from front on level surface. All TSS 2.5+ functions camera-dependent. Clear DTC before road test.
Front Bumper Repair or Replacement Affected: TSS 2.5+ Forward Radar
Radar Techstream initialization. Pair with camera calibration when both disturbed.
Rear Bumper Repair or Replacement Affected: BSM Sensors, RCTA
BSM Techstream init for any disturbed sensor. Road verify at speed.
Any Collision Affected: SRS ECU, all ADAS sensors, deployed systems
Full Techstream scan. SRS: replace if DTC 51-xx. Calibrate all disturbed ADAS before delivery.
ECM or HV ECU Replacement Affected: ECM, MG ECU, HV Battery ECU, Immobilizer
HV service plug out. Techstream VIN registration, IMMO coding, injector compensation, resolver calibration (MG ECU).
Smart Key ECU Replacement Affected: All registered keys
All keys erased. TIS authorization for AKL. All keys present for re-registration.
Wheel Alignment / Suspension Work Affected: Steering Angle Sensor
SAS zero-point via Techstream. Drive straight 35+ mph after reset.
Forward Camera Replacement
Camera module replacement requires full recalibration using Techstream.
Forward Radar Replacement
Radar module replacement requires alignment/calibration using Techstream.
BSM Sensor Replacement
Blind spot monitoring sensor replacement requires calibration using Techstream.
Mirror Replacement
If BSD sensor is mirror-integrated, recalibration required. Verify sensor location; use Techstream if applicable.
SRS MODULES
SRS Modules
SRS Control Unit 8917008220
- PART
- 8917008220
- LOCATION
- Under center console
- MFG
- Denso
- NOTES
- Requires Techstream or J2534 for SRS reset. DTC B1650 common post-crash. Battery disconnect and 90-second wait before removal.
SRS Control Unit 8917008230
- PART
- 8917008230
- LOCATION
- Under center console
- MFG
- Denso
- NOTES
- Requires Techstream or J2534 for SRS reset. DTC B1650 common post-crash. Battery disconnect and 90-second wait before removal.
SRS Control Unit 8917008210
- PART
- 8917008210
- LOCATION
- Under center console
- MFG
- Denso
- NOTES
- Requires Techstream or J2534 for SRS reset. DTC B1650 common post-crash. Battery disconnect and 90-second wait before removal.
ECU MODULES
ECU Modules
ECM - 2.5L A25A-FXS Hybrid (AWD) ~89661-08
- PART
- ~89661-08
- PROTOCOL
- OBD Programming Port
- CODING
- Yes
- CLONE
- No
- CHIP/MCU
- Denso SH72543 / Renesas RH850
- NOTES
- HV service plug out mandatory. Techstream ECM: TIS calibration file + VIN registration + IMMO coding + injector compensation (QR code). TIS HV safety protocol required.
MG ECU (Motor-Generator Control) ~89650-08
- PART
- ~89650-08
- PROTOCOL
- OBD Programming Port
- CODING
- Yes
- CLONE
- No
- CHIP/MCU
- Denso
- NOTES
- HV disable required. MG1/MG2 resolver zero-point calibration via Techstream after replacement.
HV Battery ECU ~89892-08
- PART
- ~89892-08
- PROTOCOL
- OBD Programming Port
- CODING
- Yes
- CLONE
- No
- CHIP/MCU
- Denso
- NOTES
- HV service plug out. OEM only. SOC and cell balance verify post-programming.
Rear Motor Inverter (E-Four AWD) ~G9240-08
- PART
- ~G9240-08
- PROTOCOL
- OBD Programming Port
- CODING
- Yes
- CLONE
- No
- CHIP/MCU
- Denso
- NOTES
- HV service plug out. Techstream initialization. AWD torque distribution verify.
BCM MODULES
BCM Modules
Body ECU (Smart Entry / Body Integration) ~89220-08100
- PART
- ~89220-08100
- SECURITY
- AES-128 DST-AES
- CODING
- Yes
- CLONE
- No
- NOTES
- Techstream initialization. Smart Key re-registration - all keys must be present.
Smart Key ECU ~89990-08100
- PART
- ~89990-08100
- SECURITY
- AES-128 DST-AES
- CODING
- Yes
- CLONE
- No
- NOTES
- All keys erased on replacement. TIS authorization required. All keys present for Techstream re-registration. Max 8 keys.
Power Sliding Door ECU (Left) ~89640-08
- PART
- ~89640-08
- SECURITY
- standard
- CODING
- Yes
- CLONE
- No
- NOTES
- Techstream PSD init. Force/travel limit adjustment. Pinch detection verify.
Power Sliding Door ECU (Right) ~89640-08 R (VERIFY VIA TIS)
- PART
- ~89640-08 R (VERIFY VIA TIS)
- SECURITY
- standard
- CODING
- Yes
- CLONE
- No
- NOTES
- Same as left PSD ECU.
Power Liftgate ECU ~89640-08 L (VERIFY VIA TIS)
- PART
- ~89640-08 L (VERIFY VIA TIS)
- SECURITY
- standard
- CODING
- Yes
- CLONE
- No
- NOTES
- Techstream PLG init. Height limit set. Obstacle detection verify.
TCU / TCM TRANSMISSION MODULES
TCU / TCM Transmission Modules
TCU - U760F 8-Speed Auto 89530-08
- PART
- 89530-08
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- Yes
- CHIP/MCU
- Renesas SH72546
- NOTES
- Requires Techstream coding, ATF relearn procedure, WS fluid specification
ABS / BRAKE MODULES
ABS / Brake Modules
Skid Control ECU (ABS/VSC/TRAC) - Hybrid ~89540-08
- PART
- ~89540-08
- CLONE
- No
- NOTES
- Techstream ABS/VSC init. SAS zero-point calibration required. Hybrid regen coordination verify.
Wheel Speed Sensor - Front Left ~89542-08
- PART
- ~89542-08
- CLONE
- No
- NOTES
- Active Hall-effect. DTC clear + road test 15+ mph.
Wheel Speed Sensor - Front Right ~89543-08
- PART
- ~89543-08
- CLONE
- No
- NOTES
- Same as front left.
Wheel Speed Sensor - Rear Left ~89545-08
- PART
- ~89545-08
- CLONE
- No
- NOTES
- E-Four proximity - verify no magnetic interference post-install.
Wheel Speed Sensor - Rear Right ~89544-08
- PART
- ~89544-08
- CLONE
- No
- NOTES
- Same as rear left.
OTHER MODULES (IPC, SAS)
Other Modules (IPC, SAS)
Instrument Panel Cluster (IPC) 83800-08A50
- PART
- 83800-08A50
- CLONE
- Yes
- NOTES
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Steering Angle Sensor (SAS)
- CODING
- Yes
- NOTES
- INTEGRATED (spiral cable 84306 family)
CONNECTIVITY & ACCESSORIES
Connectivity & Accessories
Display Audio - 9 inch (LE / XLE / XSE) ~86140-08
- PART
- ~86140-08
- NOTES
- Wireless CarPlay and Android Auto. OTA capable. Techstream audio check.
Display Audio - 12.3 inch (Platinum) ~86140-08 P (VERIFY VIA TIS)
- PART
- ~86140-08 P (VERIFY VIA TIS)
- NOTES
- Platinum 12.3 inch. JBL. Wireless CarPlay/Android Auto. Techstream integration check.
Wireless Charger (XLE / XSE / Platinum) ~86907-08
- PART
- ~86907-08
- NOTES
- Qi charging. Verify function after replacement.
Rear Seat Entertainment - 11.6 inch (Platinum) ~86680-08
- PART
- ~86680-08
- NOTES
- Dual rear displays. Techstream DTC check.
KEY SECURITY & IMMOBILIZER
Key Security & Immobilizer
- System Toyota Smart Key / Transponder
- Add Key Yes
- All Keys Lost Yes
Toyota Smart Entry - AES-128 DST-AES transponder; no OBD pin extraction; AKL requires TIS dealer authorization; max 8 keys; 315 MHz RF (US market)
IMMOBILIZER MODULES
Immobilizer Modules
Toyota Immobilizer - Smart Key ECU (AES-128) ~89990-08100
- PART
- ~89990-08100
- SECURITY
- AES-128 DST-AES
- NOTES
- Gen 4. No OBD pin extraction. AKL: TIS dealer authorization. Techstream only. Max 8 keys. TOY48 blade.
KEY & FOB TYPES
Key & Fob Types
Proximity Smart Key Fob ~89904-08010
- PART
- ~89904-08010
- NOTES
- AES-128 DST-AES. Techstream only. Add key: 1 working key minimum. AKL: TIS authorization. TOY48 blade. CR2032. Max 8 keys.
Replacement Notes
Toyota Smart Key / Transponder system. Techstream required for key programming and module replacement. No obd pin extraction; akl supported.
ARCHITECTURE & CONNECTIVITY
Architecture & Connectivity
- Body Construction
- TNGA-K Unibody - High-Tensile Steel with Structural Adhesive Bonding, Minivan
- OBD Protocol
- ISO 15765-4 CAN (500 kbps)
- CAN Architecture
- Multi-CAN bus: PT-CAN (powertrain/HV), Body-CAN, AVC-LAN (multimedia); OBD2 DLC Pin 6/14 CAN 500 kbps
- Infotainment
- Toyota Audio Multimedia 9" (LE/XLE/XSE) or 12.3" (Platinum); Wireless Apple CarPlay; Wireless Android Auto; Toyota Connected Services
- OTA Capable
- Yes
- Infotainment Name
- Toyota Audio Multimedia
- Wireless CarPlay
- Yes
- Wireless Android Auto
- Yes
- ECU/TCM Unlocking
- Contact us
- ECU/TCM Flashing
- Contact us
OPENPILOT / COMMA.AI
Openpilot Compatibility
Not Supported
Not supported - 2025 outside openpilot year range (2018-2023)
Not in openpilot support tree as of April 2026. Supported years: 2018-2023. 2024+ not yet in tree.
FREQUENTLY ASKED QUESTIONS
FAQ
How much does ADAS calibration cost for a 2025 Toyota Sienna?
ADAS calibration pricing for a 2025 Toyota Sienna depends on which of its 8 documented systems need work after a repair. This vehicle is documented with Forward Camera (Monocular), Forward Radar (77GHz), Blind Spot Monitor Sensor - Left (BSM), Blind Spot Monitor Sensor - Right (BSM), and Rear Cross Traffic Alert (RCTA). We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.
Can you reset the airbag light on a 2025 Toyota Sienna?
Yes. The 2025 Toyota Sienna uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: 8917008220. Mobile diagnosis and programming are the active service path. Mail-in bench intake is temporarily unavailable. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.
What is needed after replacing the windshield on a 2025 Toyota Sienna?
After windshield replacement on a 2025 Toyota Sienna, Forward Camera (Monocular), Forward Radar (77GHz), and Rear View Camera rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in intake is temporarily unavailable.
How long does a 2025 Toyota Sienna module service take?
Most 2025 Toyota Sienna onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 22 programmable modules documented in our database (4 ECU, 5 BCM, 1 TCU, 5 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module intake is temporarily unavailable.
Do you cover the 2025 Toyota Sienna on-site, or is this mail-in only?
We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, key programming, IMMO pairing, post-repair recoding, and supported module work). Mail-in module intake is temporarily unavailable. Quote the work and we will confirm the active service path for the 2025 Toyota Sienna. Do not ship a module unless support confirms next steps.
What kind of warranty do you offer on 2025 Toyota Sienna programming?
Every programming, cloning, and calibration job on the 2025 Toyota Sienna is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
Can you program a 2025 Toyota Sienna with no working keys (all-keys-lost)?
Yes - all-keys-lost is supported on the 2025 Toyota Sienna. Immobilizer generation on this platform: Toyota Smart Key / Transponder. Adding a key (with a working key already in hand) is also supported - typically faster and less expensive than an all-keys-lost reset. Submit the VIN and we will confirm the procedure and quote before scheduling.
Which modules on a 2025 Toyota Sienna can you actually service?
We program, clone, repair, or replace the full programmable-module stack on a 2025 Toyota Sienna. For this vehicle our database documents:
- 4 engine control (ECU/PCM)
- 1 transmission control (TCU/TCM)
- 5 body control (BCM and related)
- 5 ABS / brake control (EBCM)
- 1 immobilizer / security
- 1 key & fob
- 1 instrument cluster (IPC)
- 1 steering angle sensor (SAS)
- 8 ADAS module
Infotainment on this platform: Toyota Audio Multimedia. Send the VIN and the operations performed and we will confirm support and pricing.
Additional Module Part Numbers
Additional OEM-sourced part numbers for the 2025 Toyota Sienna covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.
- ADAS Module Part Numbers
- 8646C-08021, 88210-02021, 86790-08080, 08110
- ECU / PCM Part Numbers
- 89661-08700, 89661-08730
- BCM / Body Module Part Numbers
- ~89220-08100, ~89990-08100, ~89640-08, ~89640-08 R (VERIFY VIA TIS), ~89640-08 L (VERIFY VIA TIS)
- TCU / TCM Part Numbers
- 89530-08
- SRS / Airbag Module Part Numbers
- 8917008220, 8917008230, 8917008210
- ABS / EBCM Part Numbers
- 44050-08060 (FWD HYBRID), 44050-08070 (E-FOUR AWD HYBRID)
- Instrument Cluster (IPC) Part Numbers
- 83800-08A50
- Transmission Control Module (TCM) Part Numbers
- 89530-08
- Steering Angle Sensor (SAS) Part Numbers
- INTEGRATED (SPIRAL CABLE 84306 FAMILY)
Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.
Different trim or build?
Send your VIN and we'll confirm exact module support and pricing in the quote response.
Hit a security wall? We've got the keys.
1-year unlimited warranty on every flash and calibration.
Shared module fitment
Vehicles sharing modules with the 2025 Toyota Sienna
These vehicles use one or more of the same replacement modules indexed for this vehicle.