VIN / Build Split
VIN pos 4-8 identifies model/body/engine. Toyota WMI: 2T1 (Camry), 4T1 (Corolla/RAV4), 5TD (Highlander). Position 7 = engine. Position 10 = model year code.
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
DFW Mobile Service
DFW Serving Dallas / Fort Worth
2022 Toyota Sienna Supported Services
2022 Toyota Sienna
ADAS calibration, module programming, and security relearns
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Technical snapshot
- Platform TNGA-K (XL40, 4th Gen Minivan)
- CAN Architecture Multi-CAN bus: PT-CAN (powertrain/HV), Body-CAN, AVC-LAN (multimedia); OBD2 DLC Pin 6/14 CAN 500 kbps
- Security Toyota Smart Entry - AES-128 DST-AES transponder; no OBD pin extraction; AKL requires TIS dealer authorization; max 8 keys; 315 MHz RF (US market)
OVERVIEW
Expert ADAS calibration, module programming, and diagnostic recovery for the 2022 Toyota Sienna. On this vehicle we cover documented systems include Forward Camera (Monocular), Forward Radar (77GHz), and Blind Spot Monitor Sensor - Left (BSM), this TNGA-K (XL40, 4th Gen Minivan) platform vehicle, Toyota Immobilizer Gen 4 (AES-128 DST-AES) immobilizer support, Toyota Entune 3.0 infotainment programming. Mobile across the DFW Metroplex; mail-in module work is temporarily unavailable.
Platform
TNGA-K (XL40, 4th Gen Minivan)
Production
2004-present
Trim Levels
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Drivetrain
FWD / AWD
Engine
-
CAN Speed
Multi-CAN bus: PT-CAN (powertrain/HV), Body-CAN, AVC-LAN (multimedia); OBD2 DLC Pin 6/14 CAN 500 kbps
YEAR-SPECIFIC NOTES
Infotainment
Toyota Entune 3.0
Exact-year service summary for 2022 Toyota Sienna
ADAS coverage
This 2022 Toyota Sienna page documents 7 ADAS systems, including Forward Camera (Monocular), Forward Radar (77GHz), Blind Spot Monitor Sensor - Left (BSM), and Blind Spot Monitor Sensor - Right (BSM).
View ADAS dataCalibration triggers
Documented calibration triggers include Windshield Replacement, Front Bumper Repair or Replacement, Rear Bumper Repair or Replacement, and Any Collision. Use the ADAS tab for the full trigger list.
View triggersProgrammable modules
This page indexes 30 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and IPC coverage.
View modulesGateway and security
This page includes 2 gateway, immobilizer, or key-security records for this 2022 Toyota Sienna.
View securityCore Auto Logic capability
Core Auto Logic supports exact-year diagnostics, ADAS calibration, module programming, and security-access planning for the 2022 Toyota Sienna using the documented systems and module data on this page.
Choose a sectionWhat changes on this exact year
Feature availability
Toyota Safety Sense 2.0 (TSS 2.0): Pre-Collision System with Pedestrian/Cyclist - Available; Immobilizer: Toyota Immobilizer Gen 4 (AES-128 DST-AES) - Standard; Platform: TNGA-K (XL40, 4th Gen Minivan) - Confirmed
Driver-assist suite
Toyota Safety Sense 2.0 (TSS 2.0): Pre-Collision System with Pedestrian/Cyclist Detection, Lane Departure Alert, Lane Tracing Assist, Radar Cruise Control, Automatic High Beams
VIN and build split
VIN pos 4-8 identifies model/body/engine. Toyota WMI: 2T1 (Camry), 4T1 (Corolla/RAV4), 5TD (Highlander). Position 7 = engine. Position 10 = model year code.
Infotainment context
Toyota Entune 3.0; Toyota Audio Multimedia 9" (LE/XLE/XSE) or 12.3" (Platinum); Apple CarPlay/Android Auto standard; Toyota Connected Services
Network and access
CAN: Multi-CAN bus: PT-CAN (powertrain/HV), Body-CAN, AVC-LAN (multimedia); OBD2 DLC Pin 6/14 CAN 500 kbps
Tool access for this exact year
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
Factory scan, coding, and calibration access
Toyota Techstream / Toyota GTS+
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
OEM subscription required
Make-level OEM tool map plus exact-year gateway and ADAS fields.
ADAS scan, setup, and verification
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Tool subscription required
Service-level scanner-vendor source packet plus exact-year ADAS records.
Bench cloning and chip-level recovery
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Bench programmer source packet plus exact-year module/security records.
Choose a section to view data
SUPPORTED SYSTEMS
What we service on this vehicle
Documented module coverage for the 2022 Toyota Sienna. Counts reflect modules our techs have programmed or calibrated on this exact platform.
ADAS Calibration
7 modules documented
Forward camera, radar, surround-view and lane-keep recalibration after windshield, suspension or fascia work.
Open ADAS tabEngine / ECU Programming
4 modules documented
Powertrain reprogramming, calibration updates, replacement ECU configuration and security access.
Open Modules tabBCM / Body Programming
5 modules documented
Body control module, gateway and accessory programming. Includes feature-bit reconfiguration.
Open Modules tabTCU / Transmission
1 module documented
Transmission control module reprogramming, adaptive learning reset and replacement TCM clone.
Open Modules tabSRS / Airbag Reset
9 modules documented
Crash-data clear, hard-code reset and replacement airbag module configuration.
Open Modules tabABS / Brake Module
5 modules documented
ABS / EBCM bleed support, replacement module coding and yaw-rate sensor calibration.
Open Modules tabKey Security & Immobilizer
1 module documented
Immobilizer modules, key/fob types, add-key + all-keys-lost (AKL) capability and security overview.
Open Security tabIPC, SAS & Other Modules
2 modules documented
Instrument cluster cloning, steering angle sensor calibration and other supporting modules.
Open Modules tabConnectivity & Accessories
4 modules documented
Infotainment radio, surround view, remote start, trailer brake controller and other equipped systems.
Open Modules tabRecalibration Triggers
11 modules documented
Service events that require ADAS recalibration on this vehicle. Tap to see what triggers what.
Open ADAS tabNeed something not listed? Most undocumented modules can still be programmed.
Get a QuoteFeature availability 3
Toyota Safety Sense 2.0 (TSS 2.0): Pre-Collision System with Pedestrian/Cyclist
AvailableCalibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.
Immobilizer: Toyota Immobilizer Gen 4 (AES-128 DST-AES)
StandardKey programming requires manufacturer-level tool access.
Platform: TNGA-K (XL40, 4th Gen Minivan)
ConfirmedVerify platform code matches when cross-referencing part numbers across model years.
WHAT WE RESOLVE
Common issues on this vehicle
Common Toyota Sienna issues we resolve on this platform: Forward Camera (Monocular), Forward Radar (77GHz), Blind Spot Monitor Sensor - Left (BSM), and Blind Spot Monitor Sensor - Right (BSM) recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - TNGA-K (XL40, 4th Gen Minivan) platform uses Multi-CAN bus: PT-CAN (powertrain/HV), Body-CAN, AVC-LAN (multimedia); OBD2 DLC Pin 6/14 CAN 500 kbps. Key programming and immobilizer faults - Toyota Immobilizer Gen 4 (AES-128 DST-AES) immobilizer; all-keys-lost supported.
ADAS CALIBRATION MATRIX
ADAS systems on this vehicle
Toyota Safety Sense 2.0 (TSS 2.0): Pre-Collision System with Pedestrian/Cyclist Detection, Lane Departure Alert, Lane Tracing Assist, Radar Cruise Control, Automatic High Beams
Scroll for part numbers and Details
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Forward Camera (Monocular) | Forward Camera | Camera | Static | YES | ~86790-08060 | |
| Forward Radar (77GHz) | Front Radar | Radar | Static | YES | ~88210-08040 | |
| Blind Spot Monitor Sensor - Left (BSM) | Side Radar | Radar | Static + Dynamic | YES | ~88162-08020 | |
| Blind Spot Monitor Sensor - Right (BSM) | Side Radar | Radar | Static + Dynamic | YES | ~88161-08020 | |
| Rear Cross Traffic Alert (RCTA) | Side Radar | Radar | None | YES | - | |
| Automatic High Beams (AHB) | Forward Camera | Camera | Static | YES | (INTEGRATED TSS 2.0 CAMERA) | |
| Rear View Camera | Rear Camera | Camera | Static | YES | ~86790-08020 (VERIFY SUFFIX VIA TIS) |
ADAS SYSTEM
YES Supported
Identification
- System type
- Module category
- Sensor location
Part Numbers
- OEM
- Alternative
Calibration & Triggers
- Calibration type
- Programming approach
- Requires PMI
- Trigger events
Technical Notes
- Chip / MCU
- Service notes
Need this calibrated?
Get a quote for ADAS calibration WHEN IS CALIBRATION REQUIRED?
Triggers for ADAS recalibration
Windshield Replacement Affected: TSS 2.0 Forward Camera (PCS, LDA, LTA, AHB, RCC)
Static camera calibration via Techstream. Target at 3.0 m from front on level surface. Clear DTC before road test.
Front Bumper Repair or Replacement Affected: TSS 2.0 Forward Radar (PCS, RCC, AEB)
Radar initialization via Techstream. Perform with camera calibration if both disturbed. Replace if deformed.
Rear Bumper Repair or Replacement Affected: BSM Sensors (L/R), RCTA
BSM Techstream initialization for any disturbed sensor. Verify BSM function at road speed.
Any Collision Affected: SRS ECU, ADAS sensors, all deployed systems
Full Techstream scan. SRS ECU: replace if DTC 51-xx present. All disturbed ADAS modules must be calibrated before delivery.
ECM or HV ECU Replacement Affected: ECM, MG ECU, HV Battery ECU, Immobilizer
HV service plug out. Techstream VIN registration, IMMO coding, injector compensation. MG ECU: resolver calibration. HV Battery ECU: SOC verify.
Smart Key ECU Replacement Affected: All registered keys
All keys erased. TIS authorization for AKL. All customer keys must be present for re-registration.
Wheel Alignment / Suspension Work Affected: Steering Angle Sensor
SAS zero-point calibration via Techstream. Drive straight 35+ mph after reset.
Forward Camera Replacement
Camera module replacement requires full recalibration using Techstream.
Forward Radar Replacement
Radar module replacement requires alignment/calibration using Techstream.
BSM Sensor Replacement
Blind spot monitoring sensor replacement requires calibration using Techstream.
Mirror Replacement
If BSD sensor is mirror-integrated, recalibration required. Verify sensor location; use Techstream if applicable.
SRS MODULES
SRS Modules
SRS Control Unit x9
89170-08210 Under center console
- PART
- 89170-08210
- LOCATION
- Under center console
- MFG
- Denso
- NOTES
- Requires Techstream or J2534 for SRS reset. DTC B1650 common post-crash. Battery disconnect and 90-second wait before removal.
89170-08220 Under center console
- PART
- 89170-08220
- LOCATION
- Under center console
- MFG
- Denso
- NOTES
- Requires Techstream or J2534 for SRS reset. DTC B1650 common post-crash. Battery disconnect and 90-second wait before removal.
89170-08230 Under center console
- PART
- 89170-08230
- LOCATION
- Under center console
- MFG
- Denso
- NOTES
- Requires Techstream or J2534 for SRS reset. DTC B1650 common post-crash. Battery disconnect and 90-second wait before removal.
89170-08210 Under center console
- PART
- 89170-08210
- LOCATION
- Under center console
- MFG
- Denso
- NOTES
- Requires Techstream or J2534 for SRS reset. DTC B1650 common post-crash. Battery disconnect and 90-second wait before removal.
89170-08220 Under center console
- PART
- 89170-08220
- LOCATION
- Under center console
- MFG
- Denso
- NOTES
- Requires Techstream or J2534 for SRS reset. DTC B1650 common post-crash. Battery disconnect and 90-second wait before removal.
89170-08230 Under center console
- PART
- 89170-08230
- LOCATION
- Under center console
- MFG
- Denso
- NOTES
- Requires Techstream or J2534 for SRS reset. DTC B1650 common post-crash. Battery disconnect and 90-second wait before removal.
89170-08210 Under center console
- PART
- 89170-08210
- LOCATION
- Under center console
- MFG
- Denso
- NOTES
- Requires Techstream or J2534 for SRS reset. DTC B1650 common post-crash. Battery disconnect and 90-second wait before removal.
89170-08220 Under center console
- PART
- 89170-08220
- LOCATION
- Under center console
- MFG
- Denso
- NOTES
- Requires Techstream or J2534 for SRS reset. DTC B1650 common post-crash. Battery disconnect and 90-second wait before removal.
89170-08230 Under center console
- PART
- 89170-08230
- LOCATION
- Under center console
- MFG
- Denso
- NOTES
- Requires Techstream or J2534 for SRS reset. DTC B1650 common post-crash. Battery disconnect and 90-second wait before removal.
ECU MODULES
ECU Modules
ECM - 2.5L A25A-FXS Hybrid (AWD) ~89661-08
- PART
- ~89661-08
- PROTOCOL
- OBD Programming Port
- CODING
- Yes
- CLONE
- No
- CHIP/MCU
- Denso SH72543 / Renesas RH850
- NOTES
- HV service plug removal mandatory. Techstream ECM programming: TIS calibration file + VIN registration + IMMO coding + injector compensation (QR code on each injector). Same procedure as 2021.
MG ECU (Motor-Generator Control) ~89650-08
- PART
- ~89650-08
- PROTOCOL
- OBD Programming Port
- CODING
- Yes
- CLONE
- No
- CHIP/MCU
- Denso
- NOTES
- HV disable required. Techstream MG ECU programming. MG1/MG2 resolver zero-point calibration required after replacement.
HV Battery ECU ~89892-08
- PART
- ~89892-08
- PROTOCOL
- OBD Programming Port
- CODING
- Yes
- CLONE
- No
- CHIP/MCU
- Denso
- NOTES
- HV service plug out mandatory. Techstream programming. Verify cell balance and SOC after programming. OEM only.
Rear Motor Inverter (E-Four AWD) ~G9240-08
- PART
- ~G9240-08
- PROTOCOL
- OBD Programming Port
- CODING
- Yes
- CLONE
- No
- CHIP/MCU
- Denso
- NOTES
- HV service plug out. Techstream rear motor ECU initialization. Verify AWD torque distribution post-programming.
BCM MODULES
BCM Modules
Body ECU (Smart Entry / Body Integration) ~89220-08100
- PART
- ~89220-08100
- SECURITY
- AES-128 DST-AES
- CODING
- Yes
- CLONE
- No
- NOTES
- Techstream initialization required. Smart Key re-registration required after replacement - all keys must be present.
Smart Key ECU ~89990-08100
- PART
- ~89990-08100
- SECURITY
- AES-128 DST-AES
- CODING
- Yes
- CLONE
- No
- NOTES
- All keys erased on replacement. TIS dealer authorization required. All customer keys must be present for Techstream re-registration. Max 8 keys.
Power Sliding Door ECU (Left) ~89640-08
- PART
- ~89640-08
- SECURITY
- standard
- CODING
- Yes
- CLONE
- No
- NOTES
- Techstream PSD initialization. Adjust force and travel limits. Verify pinch detection.
Power Sliding Door ECU (Right) ~89640-08 R (VERIFY VIA TIS)
- PART
- ~89640-08 R (VERIFY VIA TIS)
- SECURITY
- standard
- CODING
- Yes
- CLONE
- No
- NOTES
- Same as left PSD ECU.
Power Liftgate ECU ~89640-08 L (VERIFY VIA TIS)
- PART
- ~89640-08 L (VERIFY VIA TIS)
- SECURITY
- standard
- CODING
- Yes
- CLONE
- No
- NOTES
- Techstream PLG initialization. Set open height limit. Verify obstacle detection.
TCU / TCM TRANSMISSION MODULES
TCU / TCM Transmission Modules
TCU - U660F 8-Speed Auto 89530-08
- PART
- 89530-08
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- No
- CHIP/MCU
- Renesas SH7269
- NOTES
- Requires Toyota TIS or J2534 tool, VIN coding mandatory, ATF WS fluid, shift relearn via test drive
ABS / BRAKE MODULES
ABS / Brake Modules
Skid Control ECU (ABS/VSC/TRAC) - Hybrid ~89540-08
- PART
- ~89540-08
- CLONE
- No
- NOTES
- Techstream ABS/VSC initialization. SAS zero-point calibration required post-replacement. Hybrid regenerative braking coordination - verify no HV DTC after init.
Wheel Speed Sensor - Front Left ~89542-08
- PART
- ~89542-08
- CLONE
- No
- NOTES
- Hall-effect active sensor. Techstream DTC clear + road test at 15+ mph.
Wheel Speed Sensor - Front Right ~89543-08
- PART
- ~89543-08
- CLONE
- No
- NOTES
- Same as front left.
Wheel Speed Sensor - Rear Left ~89545-08
- PART
- ~89545-08
- CLONE
- No
- NOTES
- E-Four proximity - verify no magnetic interference.
Wheel Speed Sensor - Rear Right ~89544-08
- PART
- ~89544-08
- CLONE
- No
- NOTES
- Same as rear left.
OTHER MODULES (IPC, SAS)
Other Modules (IPC, SAS)
Instrument Panel Cluster (IPC) 83800-08D40, 83800-08C21
- PART
- 83800-08D40, 83800-08C21
- CLONE
- Yes
- NOTES
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Steering Angle Sensor (SAS)
- CODING
- Yes
- NOTES
- INTEGRATED (spiral cable 84306 family)
CONNECTIVITY & ACCESSORIES
Connectivity & Accessories
Display Audio - 9 inch (LE / XLE / XSE) ~86140-08
- PART
- ~86140-08
- NOTES
- Toyota Audio Multimedia 9 inch. Apple CarPlay / Android Auto. Techstream audio check. OTA update capable.
Display Audio - 12.3 inch (Platinum) ~86140-08 P (VERIFY VIA TIS)
- PART
- ~86140-08 P (VERIFY VIA TIS)
- NOTES
- Platinum trim 12.3 inch widescreen. JBL audio. Techstream integration check post-replacement.
Wireless Charger (XLE / XSE / Platinum) ~86907-08
- PART
- ~86907-08
- NOTES
- Qi wireless charging center console. Verify function with compatible device after replacement.
Rear Seat Entertainment - 11.6 inch (Platinum) ~86680-08
- PART
- ~86680-08
- NOTES
- Dual rear displays on Platinum. Techstream DTC check for display communication fault.
KEY SECURITY & IMMOBILIZER
Key Security & Immobilizer
- System Toyota Immobilizer Gen 4 (AES-128 DST-AES)
- Add Key Yes
- All Keys Lost Yes
Toyota Smart Entry - AES-128 DST-AES transponder; no OBD pin extraction; AKL requires TIS dealer authorization; max 8 keys; 315 MHz RF (US market)
IMMOBILIZER MODULES
Immobilizer Modules
Toyota Immobilizer - Smart Key ECU (AES-128) ~89990-08100
- PART
- ~89990-08100
- SECURITY
- AES-128 DST-AES
- NOTES
- Gen 4 Toyota immobilizer. No OBD pin extraction. AKL requires TIS dealer authorization. Techstream key registration. Max 8 keys. TOY48 key blade.
KEY & FOB TYPES
Key & Fob Types
Proximity Smart Key Fob ~89904-08010
- PART
- ~89904-08010
- NOTES
- AES-128 DST-AES. Techstream only. Add key: 1 working key minimum. AKL: TIS authorization required. TOY48 blade. CR2032 battery. Max 8 keys.
Replacement Notes
Toyota Immobilizer Gen 4 (AES-128 DST-AES) system. Techstream required for key programming and module replacement. No obd pin extraction; akl supported.
ARCHITECTURE & CONNECTIVITY
Architecture & Connectivity
- Body Construction
- TNGA-K Unibody - High-Tensile Steel with Structural Adhesive Bonding, Minivan
- OBD Protocol
- ISO 15765-4 CAN (500 kbps)
- CAN Architecture
- Multi-CAN bus: PT-CAN (powertrain/HV), Body-CAN, AVC-LAN (multimedia); OBD2 DLC Pin 6/14 CAN 500 kbps
- Infotainment
- Toyota Audio Multimedia 9" (LE/XLE/XSE) or 12.3" (Platinum); Apple CarPlay/Android Auto standard; Toyota Connected Services
- OTA Capable
- Yes
- Infotainment Name
- Toyota Entune 3.0
- ECU/TCM Unlocking
- Contact us
- ECU/TCM Flashing
- Contact us
OPENPILOT / COMMA.AI
Openpilot Compatibility
Not Supported
Officially supported (openpilot master)
- Package
- TSS-P (2018-20) or TSS 2.5 (2021-23)
- Hardware
- Comma 3X + Toyota harness
- Harness
- Toyota Harness
2024+ not yet in tree.
FREQUENTLY ASKED QUESTIONS
FAQ
How much does ADAS calibration cost for a 2022 Toyota Sienna?
ADAS calibration pricing for a 2022 Toyota Sienna depends on which of its 7 documented systems need work after a repair. This vehicle is documented with Forward Camera (Monocular), Forward Radar (77GHz), Blind Spot Monitor Sensor - Left (BSM), Blind Spot Monitor Sensor - Right (BSM), and Rear Cross Traffic Alert (RCTA). We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.
Can you reset the airbag light on a 2022 Toyota Sienna?
Yes. The 2022 Toyota Sienna uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: 89170-08210. Mobile diagnosis and programming are the active service path. Mail-in bench intake is temporarily unavailable. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.
What is needed after replacing the windshield on a 2022 Toyota Sienna?
After windshield replacement on a 2022 Toyota Sienna, Forward Camera (Monocular), Forward Radar (77GHz), and Rear View Camera rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in intake is temporarily unavailable.
How long does a 2022 Toyota Sienna module service take?
Most 2022 Toyota Sienna onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 22 programmable modules documented in our database (4 ECU, 5 BCM, 1 TCU, 5 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module intake is temporarily unavailable.
Do you cover the 2022 Toyota Sienna on-site, or is this mail-in only?
We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, key programming, IMMO pairing, post-repair recoding, and supported module work). Mail-in module intake is temporarily unavailable. Quote the work and we will confirm the active service path for the 2022 Toyota Sienna. Do not ship a module unless support confirms next steps.
What kind of warranty do you offer on 2022 Toyota Sienna programming?
Every programming, cloning, and calibration job on the 2022 Toyota Sienna is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
Can you program a 2022 Toyota Sienna with no working keys (all-keys-lost)?
Yes - all-keys-lost is supported on the 2022 Toyota Sienna. Immobilizer generation on this platform: Toyota Immobilizer Gen 4 (AES-128 DST-AES). Adding a key (with a working key already in hand) is also supported - typically faster and less expensive than an all-keys-lost reset. Submit the VIN and we will confirm the procedure and quote before scheduling.
Which modules on a 2022 Toyota Sienna can you actually service?
We program, clone, repair, or replace the full programmable-module stack on a 2022 Toyota Sienna. For this vehicle our database documents:
- 4 engine control (ECU/PCM)
- 1 transmission control (TCU/TCM)
- 5 body control (BCM and related)
- 5 ABS / brake control (EBCM)
- 1 immobilizer / security
- 1 key & fob
- 1 instrument cluster (IPC)
- 1 steering angle sensor (SAS)
- 7 ADAS module
Infotainment on this platform: Toyota Entune 3.0. Send the VIN and the operations performed and we will confirm support and pricing.
Additional Module Part Numbers
Additional OEM-sourced part numbers for the 2022 Toyota Sienna covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.
- ADAS Module Part Numbers
- ~86790-08060, ~88210-08040, ~88162-08020, ~88161-08020
- ECU / PCM Part Numbers
- 89661-08652, 89661-08700, 89661-08701, 2022-09, 2022)
- BCM / Body Module Part Numbers
- ~89220-08100, ~89990-08100, ~89640-08, ~89640-08 R (VERIFY VIA TIS), ~89640-08 L (VERIFY VIA TIS)
- TCU / TCM Part Numbers
- 89530-08
- SRS / Airbag Module Part Numbers
- 89170-08210, 89170-08220, 89170-08230
- ABS / EBCM Part Numbers
- 44050-08060 (FWD HYBRID), 44050-08070 (E-FOUR AWD HYBRID)
- Instrument Cluster (IPC) Part Numbers
- 83800-08D40, 83800-08C21
- Transmission Control Module (TCM) Part Numbers
- 89530-08
- Steering Angle Sensor (SAS) Part Numbers
- INTEGRATED (SPIRAL CABLE 84306 FAMILY)
Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.
Different trim or build?
Send your VIN and we'll confirm exact module support and pricing in the quote response.
Hit a security wall? We've got the keys.
1-year unlimited warranty on every flash and calibration.
Shared module fitment
Vehicles sharing modules with the 2022 Toyota Sienna
These vehicles use one or more of the same replacement modules indexed for this vehicle.