VIN / Build Split
VIN pos 4-8 identifies model/body/engine. Toyota WMI: 2T1 (Camry), 4T1 (Corolla/RAV4), 5TD (Highlander). Position 7 = engine. Position 10 = model year code.
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
DFW Mobile Service
DFW Serving Dallas / Fort Worth
2016 Toyota Highlander Supported Services
2016 Toyota Highlander
ADAS calibration, module programming, and security relearns
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Technical snapshot
- Platform XU50 (3rd Gen Highlander, verify by VIN)
- CAN Architecture Multi-CAN bus (PT-CAN powertrain, Body-CAN, AVC-LAN audio/multimedia); OBD2 DLC Pin 6/14 CAN 500kbps
- Security Toyota Smart Entry - AES-128 DST-AES transponder; no OBD pin extraction; AKL requires TIS dealer authorization; max 8 keys; 315MHz RF
OVERVIEW
Expert ADAS calibration, module programming, and diagnostic recovery for the 2016 Toyota Highlander. On this vehicle we cover documented systems include Forward Camera (as equipped), Forward Radar (as equipped), and Blind Spot Monitor Sensor - Left (as equipped), this XU50 (3rd Gen Highlander, verify by VIN) platform vehicle, Toyota Smart Key / Transponder immobilizer support. Mobile across the DFW Metroplex; mail-in module work is temporarily unavailable.
Platform
XU50 (3rd Gen Highlander, verify by VIN)
Production
2008-present
Trim Levels
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Drivetrain
FWD / AWD
Engine
-
CAN Speed
Multi-CAN bus (PT-CAN powertrain, Body-CAN, AVC-LAN audio/multimedia); OBD2 DLC Pin 6/14 CAN 500kbps
YEAR-SPECIFIC NOTES
Exact-year service summary for 2016 Toyota Highlander
ADAS coverage
This 2016 Toyota Highlander page documents 6 ADAS systems, including Forward Camera (as equipped), Forward Radar (as equipped), Blind Spot Monitor Sensor - Left (as equipped), and Blind Spot Monitor Sensor - Right (BSM).
View ADAS dataCalibration triggers
Documented calibration triggers include Windshield Replacement, Forward Camera Replacement, Front Bumper / Radar Service, and Rear Bumper / BSM Service. Use the ADAS tab for the full trigger list.
View triggersProgrammable modules
This page indexes 26 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and IPC coverage.
View modulesGateway and security
This page includes 6 gateway, immobilizer, or key-security records for this 2016 Toyota Highlander.
View securityCore Auto Logic capability
Core Auto Logic supports exact-year diagnostics, ADAS calibration, module programming, and security-access planning for the 2016 Toyota Highlander using the documented systems and module data on this page.
Choose a sectionWhat changes on this exact year
Feature availability
Toyota driver-assist equipment (as equipped) - Verify by VIN; Immobilizer: Toyota Smart Key / Transponder - Standard; Platform: XU50 Highlander - Verify by VIN
Driver-assist suite
Toyota driver-assist equipment varies by trim and market. Verify PCS, LDA, AHB, DRCC, BSM/RCTA, parking sonar, and rear camera equipment by VIN in Toyota TIS before calibration or module replacement.
VIN and build split
VIN pos 4-8 identifies model/body/engine. Toyota WMI: 2T1 (Camry), 4T1 (Corolla/RAV4), 5TD (Highlander). Position 7 = engine. Position 10 = model year code.
Infotainment context
Toyota Audio Multimedia 8" (standard) or 12.3" (Platinum); Apple CarPlay + Android Auto standard; Toyota Connected Services with OTA
Network and access
CAN: Multi-CAN bus (PT-CAN powertrain, Body-CAN, AVC-LAN audio/multimedia); OBD2 DLC Pin 6/14 CAN 500kbps
Tool access for this exact year
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
Factory scan, coding, and calibration access
Toyota Techstream / Toyota GTS+
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
OEM subscription required
Make-level OEM tool map plus exact-year gateway and ADAS fields.
ADAS scan, setup, and verification
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Tool subscription required
Service-level scanner-vendor source packet plus exact-year ADAS records.
Bench cloning and chip-level recovery
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Bench programmer source packet plus exact-year module/security records.
Choose a section to view data
SUPPORTED SYSTEMS
What we service on this vehicle
Documented module coverage for the 2016 Toyota Highlander. Counts reflect modules our techs have programmed or calibrated on this exact platform.
ADAS Calibration
6 modules documented
Forward camera, radar, surround-view and lane-keep recalibration after windshield, suspension or fascia work.
Open ADAS tabEngine / ECU Programming
4 modules documented
Powertrain reprogramming, calibration updates, replacement ECU configuration and security access.
Open Modules tabBCM / Body Programming
4 modules documented
Body control module, gateway and accessory programming. Includes feature-bit reconfiguration.
Open Modules tabTCU / Transmission
1 module documented
Transmission control module reprogramming, adaptive learning reset and replacement TCM clone.
Open Modules tabSRS / Airbag Reset
6 modules documented
Crash-data clear, hard-code reset and replacement airbag module configuration.
Open Modules tabABS / Brake Module
3 modules documented
ABS / EBCM bleed support, replacement module coding and yaw-rate sensor calibration.
Open Modules tabKey Security & Immobilizer
4 modules documented
Immobilizer modules, key/fob types, add-key + all-keys-lost (AKL) capability and security overview.
Open Security tabIPC, SAS & Other Modules
4 modules documented
Instrument cluster cloning, steering angle sensor calibration and other supporting modules.
Open Modules tabConnectivity & Accessories
4 modules documented
Infotainment radio, surround view, remote start, trailer brake controller and other equipped systems.
Open Modules tabRecalibration Triggers
9 modules documented
Service events that require ADAS recalibration on this vehicle. Tap to see what triggers what.
Open ADAS tabNeed something not listed? Most undocumented modules can still be programmed.
Get a QuoteFeature availability 3
Toyota driver-assist equipment (as equipped)
Verify by VINAvailability varies by trim and market. Verify PCS/LDA/AHB/DRCC, BSM/RCTA, parking sonar, and rear camera equipment by VIN in Toyota TIS.
Immobilizer: Toyota Smart Key / Transponder
StandardKey programming requires manufacturer-level tool access. Add key supported. All keys lost (AKL) supported.
Platform: XU50 Highlander
Verify by VINVerify platform code and part compatibility by VIN in Toyota TIS before cross-referencing across generations.
WHAT WE RESOLVE
Common issues on this vehicle
Common Toyota Highlander issues we resolve on this platform: Forward Camera (as equipped), Forward Radar (as equipped), Blind Spot Monitor Sensor - Left (as equipped), and Blind Spot Monitor Sensor - Right (BSM) recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - XU50 (3rd Gen Highlander, verify by VIN) platform uses Multi-CAN bus (PT-CAN powertrain, Body-CAN, AVC-LAN audio/multimedia); OBD2 DLC Pin 6/14 CAN 500kbps. Key programming and immobilizer faults - Toyota Smart Key / Transponder immobilizer; all-keys-lost supported.
ADAS CALIBRATION MATRIX
ADAS systems on this vehicle
Toyota driver-assist equipment varies by trim and market. Verify PCS, LDA, AHB, DRCC, BSM/RCTA, parking sonar, and rear camera equipment by VIN in Toyota TIS before calibration or module replacement.
Scroll for part numbers and Details
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Forward Camera (as equipped) | Forward Camera | ADAS | Static | YES | - | |
| Forward Radar (as equipped) | Front Radar | ADAS | Static + Dynamic | YES | - | |
| Blind Spot Monitor Sensor - Left (as equipped) | Rear Radar | ADAS | Static + Dynamic | YES | - | |
| Blind Spot Monitor Sensor - Right (BSM) | Radar | ADAS | Static + Dynamic | YES | ~88161-0E040 | |
| Rear Cross Traffic Alert (RCTA) | Radar | ADAS | Static | YES | - | |
| Automatic High Beams (as equipped) | Forward Camera | ADAS | None | YES | - |
ADAS SYSTEM
YES Supported
Identification
- System type
- Module category
- Sensor location
Part Numbers
- OEM
- Alternative
Calibration & Triggers
- Calibration type
- Programming approach
- Requires PMI
- Trigger events
Technical Notes
- Chip / MCU
- Service notes
Need this calibrated?
Get a quote for ADAS calibration WHEN IS CALIBRATION REQUIRED?
Triggers for ADAS recalibration
Windshield Replacement Affected: Forward camera / Toyota driver-assist systems if equipped
Verify equipment by VIN. If a forward camera is equipped or disturbed, follow Toyota TIS static calibration for this exact VIN and model year on a level surface.
Forward Camera Replacement Affected: Forward camera / PCS-LDA-AHB as equipped
Camera module replacement requires initialization and calibration using Toyota TIS/Techstream when equipped. Use the exact repair-manual target and setup for the VIN.
Front Bumper / Radar Service Affected: Forward radar / parking sensors if equipped
Inspect brackets and mounting points before calibration. If radar or parking sensors are equipped or disturbed, follow Toyota TIS initialization/calibration and verify DTC clear status.
Rear Bumper / BSM Service Affected: Blind Spot Monitor sensors / RCTA if equipped
Confirm trim equipment by VIN. If blind-spot sensors are disturbed, initialize/calibrate through Techstream/TIS and road-verify BSM/RCTA operation.
ECM or TCM Replacement Affected: ECM, TCM, Immobilizer
Use Toyota TIS and Techstream for VIN registration, immobilizer synchronization as equipped, ECM/TCM initialization, and calibration or adaptive relearn after replacement.
Skid Control ECU / ABS Service Affected: ABS/VSC/TRAC, steering angle sensor
Perform Techstream ABS/VSC initialization, required brake bleed, steering-angle zero-point calibration, and road-test verification when required by Toyota TIS.
Smart Key ECU / Body ECU Replacement Affected: Registered Smart Keys, body electronics
TIS authorization and Techstream key/body ECU registration may be required. Have all customer keys present and verify Smart Entry/start authorization after replacement.
Wheel Alignment / Suspension Work Affected: Steering angle sensor, ABS/VSC, ADAS if equipped
Perform steering-angle zero-point calibration when required after alignment, steering, or suspension work. Verify road-test operation and DTC clear status.
TPMS Relearn Affected: TPMS
Perform Techstream or vehicle-specific TPMS registration after sensor, wheel, or tire changes when required.
SRS MODULES
SRS Modules
SRS Control Unit 89170-0E111
- PART
- 89170-0E111
- LOCATION
- Under center console
- MFG
- Denso
- NOTES
- Requires Techstream or J2534 for SRS reset. DTC B1650 common post-crash. Battery disconnect and 90-second wait before removal.
SRS Control Unit 89170-0E141
- PART
- 89170-0E141
- LOCATION
- Under center console
- MFG
- Denso
- NOTES
- Requires Techstream or J2534 for SRS reset. DTC B1650 common post-crash. Battery disconnect and 90-second wait before removal.
SRS Control Unit 89170-0E111
- PART
- 89170-0E111
- LOCATION
- Under center console
- MFG
- Denso
- NOTES
- Requires Techstream or J2534 for SRS reset. DTC B1650 common post-crash. Battery disconnect and 90-second wait before removal.
SRS Control Unit 89170-0E141
- PART
- 89170-0E141
- LOCATION
- Under center console
- MFG
- Denso
- NOTES
- Requires Techstream or J2534 for SRS reset. DTC B1650 common post-crash. Battery disconnect and 90-second wait before removal.
SRS Control Unit 89170-0E111
- PART
- 89170-0E111
- LOCATION
- Under center console
- MFG
- Denso
- NOTES
- Requires Techstream or J2534 for SRS reset. DTC B1650 common post-crash. Battery disconnect and 90-second wait before removal.
SRS Control Unit 89170-0E141
- PART
- 89170-0E141
- LOCATION
- Under center console
- MFG
- Denso
- NOTES
- Requires Techstream or J2534 for SRS reset. DTC B1650 common post-crash. Battery disconnect and 90-second wait before removal.
ECU MODULES
ECU Modules
ECM - gasoline or hybrid powertrain (verify by VIN)
- PROTOCOL
- Techstream + TIS online programming; bench support only after module inspection.
- CHIP/MCU
- Denso / Toyota - verify by VIN
- NOTES
- Verify engine, hybrid status, emissions suffix, and calibration by VIN. Techstream/TIS programming, VIN registration, immobilizer synchronization, injector compensation as equipped, and throttle/idle relearn may be required after ECM replacement.
Hybrid control / HV Battery ECU (hybrid only)
- NOTES
- Hybrid variants require HV safety procedures before module work. Follow Toyota TIS for MG/HV battery ECU programming, SOC/cell-balance verification, and HV-CAN DTC checks.
TCM / transmission control (if equipped)
- NOTES
- Verify transmission by VIN and follow Toyota TIS initialization, fluid-check, and relearn steps.
Audio / multimedia head unit (if equipped)
- NOTES
- Verify head-unit generation, display size, and connected-service support by VIN before replacement.
BCM MODULES
BCM Modules
Body ECU (Smart Entry / Body Integration)
- NOTES
- Use Toyota TIS and Techstream for this VIN after replacement. Body ECU initialization, Smart Key/body registration as equipped, and post-repair function checks may be required.
Smart Key ECU ~89990-0E150
- PART
- ~89990-0E150
- NOTES
- TIS authorization + Techstream. All keys erased on replacement. Max 8 keys. All keys present required.
Power Back Door ECU (if equipped)
- NOTES
- Techstream PBD init. Height limit adjust. Obstacle detect verify.
Multiplex Network Body ECU
- NOTES
- Network gateway. Techstream health check after replacement.
TCU / TCM TRANSMISSION MODULES
TCU / TCM Transmission Modules
TCU - U860E 8-Speed Auto 89530-48
- PART
- 89530-48
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- No
- CHIP/MCU
- Renesas SH7058
- NOTES
- Requires Toyota TIS with calibration matching VIN. ATF WS specification. Idle relearn and road test required.
ABS / BRAKE MODULES
ABS / Brake Modules
Skid Control ECU (ABS/VSC/TRAC) ~89540-0E150
- PART
- ~89540-0E150
- NOTES
- Techstream ABS/VSC init + SAS zero-point. Drive straight 35+ mph level road. Hybrid: regen braking verify. No DTC after procedure. Verify PN via TIS for 2024.
Wheel Speed Sensors (all four) ~89542, 89543, 89546, 89545-0E020
- PART
- ~89542, 89543, 89546, 89545-0E020
- NOTES
- Active magnetic. Techstream DTC clear + road test 15+ mph all four sensors.
Brake Actuator (ABS HCU) (VERIFY VIA TIS - 44510-0E)
- PART
- (VERIFY VIA TIS - 44510-0E)
- NOTES
- Techstream power bleed. Pedal firmness verify. Hybrid: blending DTC check.
OTHER MODULES (IPC, SAS)
Other Modules (IPC, SAS)
Instrument Panel Cluster (IPC) 83800-0E230
- PART
- 83800-0E230
- CLONE
- Yes
- NOTES
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Instrument Panel Cluster (IPC) 83800-0E240
- PART
- 83800-0E240
- CLONE
- Yes
- NOTES
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Steering Angle Sensor (SAS)
- CODING
- Yes
- NOTES
- INTEGRATED (clock spring / steering column module
Steering Angle Sensor (SAS)
- CODING
- Yes
- NOTES
- cross-year extension)
CONNECTIVITY & ACCESSORIES
Connectivity & Accessories
Toyota Connected Services (OTA)
- NOTES
- OTA via Toyota Connected Services. Subscription required post-trial. Remote start, vehicle health, Safety Connect. Verify current Toyota app compatibility for 2024.
Backup Camera (VERIFY VIA TIS - 87806-0E)
- PART
- (VERIFY VIA TIS - 87806-0E)
- NOTES
- Standard all trims. Techstream ID registration if replaced. Verify image and guidelines in reverse.
Surround View Monitor (if equipped)
- NOTES
- XLE+ trims. Techstream camera system check and re-registration if replaced.
Power Rear Liftgate
- NOTES
- Techstream height limit init. Obstacle detect verify.
KEY SECURITY & IMMOBILIZER
Key Security & Immobilizer
- System Toyota Smart Key / Transponder
- Add Key Yes
- All Keys Lost Yes
Toyota Smart Entry - AES-128 DST-AES transponder; no OBD pin extraction; AKL requires TIS dealer authorization; max 8 keys; 315MHz RF
IMMOBILIZER MODULES
Immobilizer Modules
Smart Key ~89904-0E150
- PART
- ~89904-0E150
- NOTES
- AES-128 DST-AES. 315MHz. TIS authorization for AKL. Battery CR2032. Max 8 keys. Verify PN via TIS for 2024.
Smart Key ECU ~89990-0E150
- PART
- ~89990-0E150
- NOTES
- TIS authorization + Techstream. All keys erased - all customer keys present required. OEM only.
ECM (IMMO tie - Hybrid) ~89661-0E-YYY
- PART
- ~89661-0E-YYY
- NOTES
- HV service plug out. Techstream IMMO coding. HV safety protocol.
ECM (IMMO tie - Gas) ~89661-0E
- PART
- ~89661-0E
- NOTES
- Techstream IMMO coding. Injector + throttle cal also required.
KEY & FOB TYPES
Key & Fob Types
Proximity Smart Key Fob ~89904-0E150
- PART
- ~89904-0E150
- NOTES
- AES-128 DST-AES. 315MHz RF (North America). Add Key or AKL via Techstream + TIS authorization. Battery CR2032. Max 8 keys per vehicle. Verify PN via TIS for 2024.
Emergency Mechanical Key Blade
- NOTES
- Door lock cylinder only - does NOT bypass IMMO.
Replacement Notes
Use Toyota TIS and Techstream for this VIN. ECM replacement may require VIN registration, immobilizer synchronization, and calibration initialization. Smart Key ECU replacement may erase registered keys and require TIS authorization, all customer keys, key registration, and post-repair Smart Entry/start checks. Hybrid variants require Toyota HV safety procedures before ECM or hybrid-control work.
ARCHITECTURE & CONNECTIVITY
Architecture & Connectivity
- Body Construction
- XU50 unibody three-row SUV platform - verify structural repair procedures by VIN in Toyota TIS
- OBD Protocol
- ISO 15765-4 CAN (500 kbps)
- CAN Architecture
- Multi-CAN bus (PT-CAN powertrain, Body-CAN, AVC-LAN audio/multimedia); OBD2 DLC Pin 6/14 CAN 500kbps
- Infotainment
- Toyota Audio Multimedia 8" (standard) or 12.3" (Platinum); Apple CarPlay + Android Auto standard; Toyota Connected Services with OTA
- OTA Capable
- No
- ECU/TCM Unlocking
- Contact us
- ECU/TCM Flashing
- Contact us
FREQUENTLY ASKED QUESTIONS
FAQ
How much does ADAS calibration cost for a 2016 Toyota Highlander?
ADAS calibration pricing for a 2016 Toyota Highlander depends on which of its 6 documented systems need work after a repair. This vehicle is documented with Forward Camera (as equipped), Forward Radar (as equipped), Blind Spot Monitor Sensor - Left (as equipped), Blind Spot Monitor Sensor - Right (BSM), and Rear Cross Traffic Alert (RCTA). We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.
Can you reset the airbag light on a 2016 Toyota Highlander?
Yes. The 2016 Toyota Highlander uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: 89170-0E111. Mobile diagnosis and programming are the active service path. Mail-in bench intake is temporarily unavailable. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.
What is needed after replacing the windshield on a 2016 Toyota Highlander?
After windshield replacement on a 2016 Toyota Highlander, Forward Camera (as equipped) and Forward Radar (as equipped) rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in intake is temporarily unavailable.
How long does a 2016 Toyota Highlander module service take?
Most 2016 Toyota Highlander onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 24 programmable modules documented in our database (4 ECU, 4 BCM, 1 TCU, 3 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module intake is temporarily unavailable.
Do you cover the 2016 Toyota Highlander on-site, or is this mail-in only?
We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, key programming, IMMO pairing, post-repair recoding, and supported module work). Mail-in module intake is temporarily unavailable. Quote the work and we will confirm the active service path for the 2016 Toyota Highlander. Do not ship a module unless support confirms next steps.
What kind of warranty do you offer on 2016 Toyota Highlander programming?
Every programming, cloning, and calibration job on the 2016 Toyota Highlander is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
Can you program a 2016 Toyota Highlander with no working keys (all-keys-lost)?
Yes - all-keys-lost is supported on the 2016 Toyota Highlander. Immobilizer generation on this platform: Toyota Smart Key / Transponder. Adding a key (with a working key already in hand) is also supported - typically faster and less expensive than an all-keys-lost reset. Submit the VIN and we will confirm the procedure and quote before scheduling.
Which modules on a 2016 Toyota Highlander can you actually service?
We program, clone, repair, or replace the full programmable-module stack on a 2016 Toyota Highlander. For this vehicle our database documents:
- 4 engine control (ECU/PCM)
- 1 transmission control (TCU/TCM)
- 4 body control (BCM and related)
- 3 ABS / brake control (EBCM)
- 4 immobilizer / security
- 2 key & fob
- 2 instrument cluster (IPC)
- 2 steering angle sensor (SAS)
- 6 ADAS module
Send the VIN and the operations performed and we will confirm support and pricing.
Additional Module Part Numbers
Additional OEM-sourced part numbers for the 2016 Toyota Highlander covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.
- ADAS Module Part Numbers
- 88210-0E020 (DENSO 77GHZ FWD RADAR, 86790-0E020 (DENSO MONO CAMERA PCS)
- ECU / PCM Part Numbers
- 89661-0E110 (2.7L 1AR-FE I4, XU50), 89661-0E120 (3.5L 2GR-FKS V6), 89661-0E130 (3.5L 2GR-FXE HYBRID)
- BCM / Body Module Part Numbers
- ~89220-0E150, ~89990-0E150, (VERIFY VIA TIS - 89640-0E), (VERIFY VIA TIS - 82641-0E)
- TCU / TCM Part Numbers
- 89530-48
- SRS / Airbag Module Part Numbers
- 89170-0E111, 89170-0E141
- ABS / EBCM Part Numbers
- 44050-0E030 (FWD), 44050-0E040 (AWD)
- Instrument Cluster (IPC) Part Numbers
- 83800-0E230, 83800-0E240
- Transmission Control Module (TCM) Part Numbers
- 89530-48
Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.
Different trim or build?
Send your VIN and we'll confirm exact module support and pricing in the quote response.
Hit a security wall? We've got the keys.
1-year unlimited warranty on every flash and calibration.
Shared module fitment
Vehicles sharing modules with the 2016 Toyota Highlander
These vehicles use one or more of the same replacement modules indexed for this vehicle.