VIN / Build Split
VIN pos 4-8 identifies model/body/engine. Nissan WMI: 1N4, 5N1, JN1. Position 4-5 = model. Position 10 = model year code.
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
DFW Mobile Service
DFW Serving Dallas / Fort Worth
2025 Nissan Rogue Supported Services
2025 Nissan Rogue
ADAS calibration, module programming, and security relearns
Trims: S, SV, SL, Platinum. Safety Shield 360 standard SV+ (2021+).
Technical snapshot
- Platform T33 (3rd Gen Rogue, 2021+) - CMF Platform Unibody FWD/AWD
- CAN Architecture Nissan CAN FD architecture (T33); OBD2 DLC ISO 15765-4 CAN 500kbps
- Security Nissan NATS (Nissan Anti-Theft System) AES rolling code; no OBD pin extraction; AKL requires CONSULT-III Plus + Nissan ASIST/DealerCONNECT dealer authorization
What do you need fixed?
Choose a service to start your quote.
OVERVIEW
Expert ADAS calibration, module programming, and diagnostic recovery for the 2025 Nissan Rogue. On this vehicle we cover documented systems include Enhanced Safety Shield 360 / ProPilot Assist 2.0 (Platinum) / ProPilot Assist (SV/SL) Forward Camera, Forward Radar (77GHz), and Blind Spot Monitor Sensor - Left (BSM), this T33 (3rd Gen Rogue, 2021+) - CMF Platform Unibody FWD/AWD platform vehicle, NATS / I-Key immobilizer support, NissanConnect infotainment programming. Mobile across the DFW Metroplex; mail-in module service is available nationwide.
Platform
T33 (3rd Gen Rogue, 2021+) - CMF Platform Unibody FWD/AWD
Production
2008-present
Trim Levels
Trims: S, SV, SL, Platinum. Safety Shield 360 standard SV+ (2021+).
Drivetrain
FWD / AWD
Engine
-
CAN Speed
Nissan CAN FD architecture (T33); OBD2 DLC ISO 15765-4 CAN 500kbps
YEAR-SPECIFIC NOTES
Infotainment
NissanConnect
Wireless Support
CarPlay: Yes / Android Auto: Yes
Exact-year service summary for 2025 Nissan Rogue
ADAS coverage
This 2025 Nissan Rogue page documents 5 ADAS systems, including Enhanced Safety Shield 360 / ProPilot Assist 2.0 (Platinum) / ProPilot Assist (SV/SL) Forward Camera, Forward Radar (77GHz), Blind Spot Monitor Sensor - Left (BSM), and Blind Spot Monitor Sensor - Right (BSM).
View ADAS dataCalibration triggers
Documented calibration triggers include Windshield Replacement - Platinum (ProPilot Assist 2.0), Windshield Replacement - SV/SL (Standard ProPilot Assist), Windshield Replacement - S Trim (Enhanced Safety Shield 360 Only), and Forward Camera Replacement. Use the ADAS tab for the full trigger list.
View triggersProgrammable modules
This page indexes 20 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and IPC coverage.
View modulesGateway and security
This page includes 6 gateway, immobilizer, or key-security records for this 2025 Nissan Rogue.
View securityCore Auto Logic capability
Core Auto Logic supports exact-year diagnostics, ADAS calibration, module programming, and security-access planning for the 2025 Nissan Rogue using the documented systems and module data on this page.
Choose a sectionWhat changes on this exact year
Feature availability
Enhanced Safety Shield 360 standard all trims (updated 2024 pedestrian/cyclist d - Standard; Platform: T33 (3rd Gen Rogue, 2021+) - Confirmed
Driver-assist suite
Enhanced Safety Shield 360 standard all trims (updated 2024 pedestrian/cyclist detection). ProPilot Assist (SV/SL). ProPilot Assist 2.0 (Platinum). All three require CONSULT-III Plus with current ASIST software for accurate calibration.
VIN and build split
VIN pos 4-8 identifies model/body/engine. Nissan WMI: 1N4, 5N1, JN1. Position 4-5 = model. Position 10 = model year code.
Infotainment context
NissanConnect; 9" NissanConnect touchscreen; Apple CarPlay / Android Auto standard; SiriusXM; NissanConnect OTA; remote services via NissanConnect app
Connectivity notes
Wireless CarPlay: Yes; Wireless Android Auto: Yes
Network and access
CAN: Nissan CAN FD architecture (T33); OBD2 DLC ISO 15765-4 CAN 500kbps
Tool access for this exact year
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
Factory scan, coding, and calibration access
Nissan CONSULT-III Plus
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
ADAS scan, setup, and verification
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Bench cloning and chip-level recovery
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Choose a section to view data
SUPPORTED SYSTEMS
What we service on this vehicle
Documented module coverage for the 2025 Nissan Rogue. Counts reflect modules our techs have programmed or calibrated on this exact platform.
ADAS Calibration
5 modules documented
Forward camera, radar, surround-view and lane-keep recalibration after windshield, suspension or fascia work.
Open ADAS tabEngine / ECU Programming
4 modules documented
Powertrain reprogramming, calibration updates, replacement ECU configuration and security access.
Open Modules tabBCM / Body Programming
3 modules documented
Body control module, gateway and accessory programming. Includes feature-bit reconfiguration.
Open Modules tabGateway / Security Access
1 module documented
Secure gateway module identification, bypass workflow and security-access planning before programming.
Open Security tabTCU / Transmission
1 module documented
Transmission control module reprogramming, adaptive learning reset and replacement TCM clone.
Open Modules tabSRS / Airbag Reset
1 module documented
Crash-data clear, hard-code reset and replacement airbag module configuration.
Open Modules tabABS / Brake Module
5 modules documented
ABS / EBCM bleed support, replacement module coding and yaw-rate sensor calibration.
Open Modules tabIPC, SAS & Other Modules
2 modules documented
Instrument cluster cloning, steering angle sensor calibration and other supporting modules.
Open Modules tabConnectivity & Accessories
4 modules documented
Infotainment radio, surround view, remote start, trailer brake controller and other equipped systems.
Open Modules tabRecalibration Triggers
17 modules documented
Service events that require ADAS recalibration on this vehicle. Tap to see what triggers what.
Open ADAS tabNeed something not listed? Most undocumented modules can still be programmed.
Get a QuoteFeature availability 2
Enhanced Safety Shield 360 standard all trims (updated 2024 pedestrian/cyclist d
StandardCalibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.
Platform: T33 (3rd Gen Rogue, 2021+)
ConfirmedVerify platform code matches when cross-referencing part numbers across model years.
WHAT WE RESOLVE
Common issues on this vehicle
Common Nissan Rogue issues we resolve on this platform: Enhanced Safety Shield 360 / ProPilot Assist 2.0 (Platinum) / ProPilot Assist (SV/SL) Forward Camera, Forward Radar (77GHz), Blind Spot Monitor Sensor - Left (BSM), and Blind Spot Monitor Sensor - Right (BSM) recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - T33 (3rd Gen Rogue, 2021+) - CMF Platform Unibody FWD/AWD platform uses Nissan CAN FD architecture (T33); OBD2 DLC ISO 15765-4 CAN 500kbps.
ADAS CALIBRATION MATRIX
ADAS systems on this vehicle
Enhanced Safety Shield 360 standard all trims (updated 2024 pedestrian/cyclist detection). ProPilot Assist (SV/SL). ProPilot Assist 2.0 (Platinum). All three require CONSULT-III Plus with current ASIST software for accurate calibration.
Scroll for part numbers and Details
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Enhanced Safety Shield 360 / ProPilot Assist 2.0 (Platinum) / ProPilot Assist (SV/SL) Forward Camera | Camera | ADAS | Static | YES | ~284A1-6RA0A (APPROX T33 2024 - VERIFY 2024-SPECIFIC SUFFIX VIA OUR DIAGNOSTIC SOFTWARE | |
| Forward Radar (77GHz) | Radar | ADAS | Static + Dynamic | YES | ~284A0-6RA0A (APPROX T33 2024 - (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Blind Spot Monitor Sensor - Left (BSM) | Radar | ADAS | Static + Dynamic | YES | ~284M0-6RA0A (APPROX T33 2024 - VERIFY) | |
| Blind Spot Monitor Sensor - Right (BSM) | Radar | ADAS | Static + Dynamic | YES | ~284M1-6RA0A (APPROX T33 2024 - VERIFY) | |
| Backup / Surround Camera | Camera | ADAS | Static | YES | - |
ADAS SYSTEM
YES Supported
Identification
- System type
- Module category
- Sensor location
Part Numbers
- OEM
- Alternative
Calibration & Triggers
- Calibration type
- Programming approach
- Requires PMI
- Trigger events
Technical Notes
- Chip / MCU
- Service notes
Need this calibrated?
Get a quote for ADAS calibration WHEN IS CALIBRATION REQUIRED?
Triggers for ADAS recalibration
Windshield Replacement - Platinum (ProPilot Assist 2.0)
CONSULT-III Plus must be on current ASIST version before beginning. Static cal (target 3m, level surface) + ProPilot Assist 2.0 dynamic cal per 2023-2024 WSM supplement. Confirm BSD radars intact. Enhanced Safety Shield 360 + PA 2.0 all DTC clear.
Windshield Replacement - SV/SL (Standard ProPilot Assist)
CONSULT static + dynamic (50+ mph marked lanes). Current ASIST version for 2024 Enhanced SSh360 camera ECU.
Windshield Replacement - S Trim (Enhanced Safety Shield 360 Only)
CONSULT static cal only. Current ASIST version. Target 3m. All Enhanced SSh360 DTC clear.
Forward Camera Replacement
Same per-trim calibration procedure as windshield. Verify 2024 camera PN suffix via ASIST - possible ECU revision for Enhanced SSh360. CONSULT fully updated. Bracket seated before cal.
Front Radar Replacement
CONSULT radar alignment. Bumper reinstalled. Verify AEB (Enhanced SSh360) + ProPilot adaptive cruise. Current CONSULT ASIST version.
BSD Radar Replacement (Either Side)
After BSD replacement: CONSULT initialization. Verify BSW, RAB (Enhanced SSh360). ProPilot Assist 2.0 Platinum: confirm PA 2.0 lane change available and DTC-free - requires both BSD radars functional.
ECM Replacement
CONSULT + VIN + NATS sync. Throttle + idle relearn. FWD/AWD PN. NATS lamp out.
ABS / ESC Unit Replacement
CONSULT automated bleed. SAS zero-point (25+ mph straight). Verify Enhanced SSh360 RAB + PA 2.0 (Platinum) clear.
Intelligent Key ECU Replacement
DealerCONNECT auth. All keys present. Max 4 keys. NATS + ECM sync.
EPS Replacement
CONSULT EPS init + torque cal. Verify PA 2.0 Platinum steering function.
Alignment / SAS Zero-Point
CONSULT SAS reset. Drive straight 25+ mph. Required for ESC and ProPilot (2.0 Platinum) accuracy.
Any Front-End Collision
Inspect and recalibrate forward camera after any front-end collision using CONSULT-III+.
Front Bumper Repair or Replacement
Forward radar angular alignment required after front bumper R&R. Use CONSULT-III+.
Forward Radar Replacement
Radar module replacement requires alignment/calibration using CONSULT-III+.
Rear Bumper Repair or Replacement
BSD radar alignment required after rear bumper R&R. Use CONSULT-III+.
BSM Sensor Replacement
Blind spot monitoring sensor replacement requires calibration using CONSULT-III+.
Mirror Replacement
Surround view mirror camera recalibration required after mirror R&R. Use CONSULT-III+.
SRS Modules
SRS Control Unit 988206RY0C
- Part number
- 988206RY0C
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
ECU Modules
ECM - 1.5L KR15DDT VC-Turbo ~23710-6RA0A (APPROX T33 2024 - VERIFY FWD
- Part number
- ~23710-6RA0A (APPROX T33 2024 - VERIFY FWD
- Notes
- Same as 2021-2023 T33. CONSULT programming + VIN + NATS sync. Throttle + idle relearn. FWD vs AWD PN. NATS lamp out before test drive.
TCM - Xtronic CVT (RE0F11B) ~31036-6RA0A (APPROX T33 2024 - VERIFY)
- Part number
- ~31036-6RA0A (APPROX T33 2024 - VERIFY)
- Notes
- CONSULT CVT adaptive reset. Matic-S only. 100+ mile adaptation.
Electric Power Steering Control Unit (EPS)
- Notes
- CONSULT EPS init + torque cal. Verify ProPilot Assist 2.0 (Platinum) steering function after EPS replacement.
9" NissanConnect Head Unit (2024)
- Notes
- CONSULT system ID check. Verify CarPlay/Android Auto, OTA connectivity, NissanConnect app pairing post-replacement.
BCM Modules
Body Control Module (BCM) ~284B1-6RA0A (APPROX T33 2024 - VERIFY VIA CONSULT
- Part number
- ~284B1-6RA0A (APPROX T33 2024 - VERIFY VIA CONSULT
- Notes
- CONSULT BCM programming + VIN. Same T33 procedure. Verify all body functions post-replacement.
Intelligent Key ECU ~285E1-6RA0A (APPROX T33 2024 - VERIFY)
- Part number
- ~285E1-6RA0A (APPROX T33 2024 - VERIFY)
- Notes
- CONSULT + DealerCONNECT auth. All keys erased. Max 4 keys. NATS sync.
TPMS Control Unit (T33 2024 - VERIFY VIA CONSULT)
- Part number
- (T33 2024 - VERIFY VIA CONSULT)
- Notes
- CONSULT TPMS sensor registration. Verify integrated vs standalone.
TCU / TCM Transmission Modules
TCU - CVT8 Xtronic CVT 31036-6FL0
- Part number
- 31036-6FL0
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Renesas SH7264
- Notes
- Requires CONSULT III+ for programming and CVT relearn. Use NS-3 ATF only. VIN coding mandatory.
ABS / Brake Modules
ABS/ESC Control Unit ~47660-6RA0A (APPROX T33 2024 - VERIFY VIA CONSULT
- Part number
- ~47660-6RA0A (APPROX T33 2024 - VERIFY VIA CONSULT
- Notes
- CONSULT ABS init + automated brake bleed. SAS zero-point after alignment. Verify Enhanced Safety Shield 360 RAB + ProPilot Assist 2.0 (Platinum) no DTC after replacement.
Wheel Speed Sensor - Front Left ~47911-6RA0A (APPROX T33 - VERIFY)
- Part number
- ~47911-6RA0A (APPROX T33 - VERIFY)
- Notes
- CONSULT DTC clear + road test 15+ mph.
Wheel Speed Sensor - Front Right ~47910-6RA0A (APPROX T33 - VERIFY)
- Part number
- ~47910-6RA0A (APPROX T33 - VERIFY)
- Notes
- Same as front left.
Wheel Speed Sensor - Rear Left ~47901-6RA0A (APPROX T33 - VERIFY)
- Part number
- ~47901-6RA0A (APPROX T33 - VERIFY)
- Notes
- CONSULT DTC clear + road test.
Wheel Speed Sensor - Rear Right ~47900-6RA0A (APPROX T33 - VERIFY)
- Part number
- ~47900-6RA0A (APPROX T33 - VERIFY)
- Notes
- Same as rear left.
Other Modules (IPC, SAS)
Instrument Panel Cluster (IPC) 24810-6RR0A
- Part number
- 24810-6RR0A
- Cloning supported
- Yes
- Notes
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Steering Angle Sensor (SAS)
- Coding required
- Yes
- Notes
- INTEGRATED (spiral cable 25554 family)
Connectivity & Accessories
ProPilot Assist 2.0 Calibration (Platinum 2024)
- Notes
- Same as 2023 Platinum. CONSULT-III Plus fully updated to current ASIST version - required for 2024 camera ECU spec. Static cal + extended dynamic drive per 2023-2024 WSM supplement. BSD radars must be functional - PA 2.0 lane change requires both. Verify PA 2.0 available and DTC-free after cal.
Enhanced Safety Shield 360 Calibration
- Notes
- 2024: Enhanced pedestrian/cyclist detection (software-based). CONSULT static cal after windshield or camera work. Vehicle level, target 3m. Current CONSULT ASIST version critical for 2024 Enhanced SSh360 initialization. Verify all Enhanced SSh360 DTC clear.
ProPilot Assist Calibration - SV / SL (Standard)
- Notes
- Standard ProPilot Assist: CONSULT static + dynamic cal (50+ mph marked lanes). Same as 2021-2023.
NissanConnect OTA / Remote Services (2024) (TELEMATICS T33 2024)
- Part number
- (TELEMATICS T33 2024)
- Notes
- OTA via NissanConnect. Remote services via app. Verify active subscription and connectivity post head-unit replacement. Dealer ASIST activation.
Gateway / Security Modules
Central Gateway Module
- Manufacturer
- NXP / Freescale
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- MPC5606BK
- Notes
- Compatibility label: X-TRAIL. BCM Notes: Read/Write
ARCHITECTURE & CONNECTIVITY
Architecture & Connectivity
- Body Construction
- T33 Unibody - AHSS + aluminum hood/tailgate
- OBD Protocol
- ISO 15765-4 CAN (500 kbps)
- CAN Architecture
- Nissan CAN FD architecture (T33); OBD2 DLC ISO 15765-4 CAN 500kbps
- Infotainment
- 9" NissanConnect touchscreen; Apple CarPlay / Android Auto standard; SiriusXM; NissanConnect OTA; remote services via NissanConnect app
- OTA Capable
- Yes
- Infotainment Name
- NissanConnect
- Wireless CarPlay
- Yes
- Wireless Android Auto
- Yes
- ECU/TCM Unlocking
- Contact us
- ECU/TCM Flashing
- Contact us
OPENPILOT / COMMA.AI
Openpilot Compatibility
Not Supported
Not supported - 2025 outside openpilot year range (2018-2020)
Not in openpilot support tree as of April 2026. Supported years: 2018-2020. Only 2018-20 (T32 generation) supported. 2021+ new-gen not ported.
FREQUENTLY ASKED QUESTIONS
FAQ
How much does ADAS calibration cost for a 2025 Nissan Rogue?
ADAS calibration pricing for a 2025 Nissan Rogue depends on which of its 5 documented systems need work after a repair. This vehicle is documented with Enhanced Safety Shield 360 / ProPilot Assist 2.0 (Platinum) / ProPilot Assist (SV/SL) Forward Camera, Forward Radar (77GHz), Blind Spot Monitor Sensor - Left (BSM), Blind Spot Monitor Sensor - Right (BSM), and Backup / Surround Camera. We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.
Can you reset the airbag light on a 2025 Nissan Rogue?
Yes. The 2025 Nissan Rogue uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: 988206RY0C. Mobile diagnosis and programming are available in DFW, and mail-in module service is available nationwide. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.
What is needed after replacing the windshield on a 2025 Nissan Rogue?
After windshield replacement on a 2025 Nissan Rogue, Enhanced Safety Shield 360 / ProPilot Assist 2.0 (Platinum) / ProPilot Assist (SV/SL) Forward Camera, Forward Radar (77GHz), and Backup / Surround Camera rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in module service is available nationwide for eligible module work.
How long does a 2025 Nissan Rogue module service take?
Most 2025 Nissan Rogue onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 23 programmable modules documented in our database (4 ECU, 3 BCM, 1 TCU, 5 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module service is available nationwide.
Do you cover the 2025 Nissan Rogue on-site, or is this mail-in only?
We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, post-repair recoding, and supported module work). Mail-in module service is available nationwide. Quote the work and we will confirm the active service path for the 2025 Nissan Rogue. Do not ship a module unless support confirms next steps.
What kind of warranty do you offer on 2025 Nissan Rogue programming?
Every programming, cloning, and calibration job on the 2025 Nissan Rogue is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
Which modules on a 2025 Nissan Rogue can you actually service?
We program, clone, repair, or replace the full programmable-module stack on a 2025 Nissan Rogue. For this vehicle our database documents:
- 4 engine control (ECU/PCM)
- 1 transmission control (TCU/TCM)
- 3 body control (BCM and related)
- 5 ABS / brake control (EBCM)
- 3 immobilizer / security
- 2 key & fob
- 1 instrument cluster (IPC)
- 1 steering angle sensor (SAS)
- 5 ADAS module
Infotainment on this platform: NissanConnect. Send the VIN and the operations performed and we will confirm support and pricing.
Additional Module Part Numbers
Additional OEM-sourced part numbers for the 2025 Nissan Rogue covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.
- ADAS Module Part Numbers
- 284F1-6RA1B, 28438-0724R
- ECU / PCM Part Numbers
- 23703-6RC0A
- BCM / Body Module Part Numbers
- ~284B1-6RA0A (APPROX T33 2024 - VERIFY VIA CONSULT, ~285E1-6RA0A (APPROX T33 2024 - VERIFY), (T33 2024 - VERIFY VIA CONSULT)
- TCU / TCM Part Numbers
- 31036-6FL0
- SRS / Airbag Module Part Numbers
- 988206RY0C
- ABS / EBCM Part Numbers
- 47660-6RA0A, T33 3RD GEN ROGUE
- Instrument Cluster (IPC) Part Numbers
- 24810-6RR0A
- Transmission Control Module (TCM) Part Numbers
- 31036-6FL0
- Steering Angle Sensor (SAS) Part Numbers
- INTEGRATED (SPIRAL CABLE 25554 FAMILY)
Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.
Different trim or build?
Send your VIN and we'll confirm exact module support and pricing in the quote response.
Hit a security wall? We've got the keys.
1-year unlimited warranty on every flash and calibration.
Shared module fitment
Vehicles sharing modules with the 2025 Nissan Rogue
These vehicles use one or more of the same replacement modules indexed for this vehicle.
Finish the repair
Need help finishing this repair?
Get onsite help in Dallas-Fort Worth. Ask about same-day availability or a one-time remote session for eligible non-VSP work.
CONSULT III / IV Explore one-time factory coding and programming. We confirm the software and procedure for your vehicle. Module programming & recovery Replacing a module or dealing with a failed programming attempt? Send the part numbers and fault scan for review. Onsite tools & equipment Bring in a technician or ask about hourly, daily and weekly rentals where licensing and equipment availability allow.