VIN / Build Split
VIN pos 4-8 identifies model/body/engine. Nissan WMI: 1N4, 5N1, JN1. Position 4-5 = model. Position 10 = model year code.
Use vehicle lookup when you know the year, make, and model. Use quote when the car is in front of you and the symptom matters more than the catalog page.
Check coverage by vehicle, or start with the VIN and symptoms.
Call dispatch: (945) 382-4065ADAS, Module Repair & Programming
Trims: S, SV, SL, Platinum. Safety Shield 360 standard SV+ (2021+).
Expert ADAS calibration, module programming, and diagnostic recovery for the 2018 Nissan Rogue. On this vehicle we cover documented systems include Forward Camera (Monocular), Forward Radar (77GHz), and ProPilot Assist (Adaptive Cruise + LKA), this Rogue earlier generation; verify first-generation, Rogue Select, or T32 build by VIN platform vehicle, NATS / I-Key immobilizer support. Mobile across the DFW Metroplex, mail-in nationwide for module-bench work.
VIN pos 4-8 identifies model/body/engine. Nissan WMI: 1N4, 5N1, JN1. Position 4-5 = model. Position 10 = model year code.
This 2018 Nissan Rogue page documents 6 ADAS systems, including Forward Camera (Monocular), Forward Radar (77GHz), ProPilot Assist (Adaptive Cruise + LKA), and Blind Spot Monitor Sensor - Left (BSM).
View ADAS dataDocumented calibration triggers include Windshield or forward-camera replacement, Front bumper, grille, or radar service, BCM/IPDM, key, or immobilizer module replacement, and ABS/VDC, steering-angle, or suspension service. Use the ADAS tab for the full trigger list.
View triggersThis page indexes 16 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and IPC coverage.
View modulesThis page includes 6 gateway, immobilizer, or key-security records for this 2018 Nissan Rogue.
View securityCore Auto Logic supports exact-year diagnostics, ADAS calibration, module programming, and security-access planning for the 2018 Nissan Rogue using the documented systems and module data on this page.
Choose a sectionPlatform: Rogue earlier generation; verify first-generation, Rogue Select, or T32 build by VIN - Verify by VIN; NATS/NVIS / Intelligent Key equipment - Verify by VIN; Driver-assist and camera systems - if equipped - Verify by VIN
Driver-assist equipment varies by year, trim, package, and build. Verify forward camera, radar, sonar, blind-spot, and parking-camera hardware by VIN before calibration. Do not apply newer-generation Nissan ProPILOT/Safety Shield package procedures unless the VIN confirms that equipment.
VIN pos 4-8 identifies model/body/engine. Nissan WMI: 1N4, 5N1, JN1. Position 4-5 = model. Position 10 = model year code.
Factory Nissan audio, navigation, telematics, camera, and display equipment varies by trim and build date. Verify head unit, display, camera, microphone, antenna, and subscription-dependent features by VIN.
CAN: Nissan CAN/LIN network architecture varies by model year and trim; verify topology by VIN in service information
Choose a section to view data
Use model-year and VIN-specific Nissan service information when cross-referencing parts.
Use CONSULT/ASIST security and option-configuration procedures for module or key replacement.
Calibrate only with the procedure and targets for the exact model year, trim, and build.
Common Nissan Rogue issues we resolve on this platform: Forward Camera (Monocular), Forward Radar (77GHz), ProPilot Assist (Adaptive Cruise + LKA), and Blind Spot Monitor Sensor - Left (BSM) recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - Rogue earlier generation; verify first-generation, Rogue Select, or T32 build by VIN platform uses Nissan CAN/LIN network architecture varies by model year and trim; verify topology by VIN in service information. Key programming and immobilizer faults - NATS / I-Key immobilizer; all-keys-lost supported.
Documented for the 2nd Gen T32 - includes this 2018 model year. Open the full coverage on the generation guide.
ADAS calibration pricing for a 2018 Nissan Rogue depends on which of its 6 documented systems need work after a repair. This vehicle is documented with Forward Camera (Monocular), Forward Radar (77GHz), ProPilot Assist (Adaptive Cruise + LKA), Blind Spot Monitor Sensor - Left (BSM), and Blind Spot Monitor Sensor - Right (BSM). We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs and we return a number within 4 hours.
Yes. The 2018 Nissan Rogue uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: 985154BA8B. Bench-only or in-vehicle - both paths are supported. Send the part number and a description of what triggered the light, and we will provide a quote and ETA.
After windshield replacement on a 2018 Nissan Rogue, Forward Camera (Monocular), Forward Radar (77GHz), and Rear View Camera rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site (DFW Metroplex) with OE target fixtures or via mail-in for the front camera/radar module.
Most 2018 Nissan Rogue jobs complete same-day once the vehicle or module arrives. This vehicle has roughly 19 programmable modules documented in our database (1 ECU, 3 BCM, 1 TCU, 5 ABS, plus IPC/SAS/gateway/accessory). Module-bench work (ECU clones, BCM reprograms, SRS resets) ships back inside 1-3 business days including return shipping. ADAS calibration is on-site for DFW or mail-in for the front module.
Both. We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, key programming, IMMO pairing, post-repair recoding) and a mail-in bench for module-only jobs (ECU cloning, BCM repair, SRS reset, TCU clone). Quote the work and we will tell you which path is right for the 2018 Nissan Rogue.
Every programming, cloning, and calibration job on the 2018 Nissan Rogue is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
Yes - all-keys-lost is supported on the 2018 Nissan Rogue. Immobilizer generation on this platform: NATS / I-Key. Adding a key (with a working key already in hand) is also supported - typically faster and less expensive than an all-keys-lost reset. Submit the VIN and we will confirm the procedure and quote before scheduling.
We program, clone, repair, or replace the full programmable-module stack on a 2018 Nissan Rogue. For this vehicle our database documents:
Send the VIN and the operations performed and we will confirm support and pricing.
Send your VIN and we'll confirm exact module support and pricing for your specific vehicle within 4 hours.
1-year unlimited warranty on every flash and calibration.
Shared module fitment
These vehicles use one or more of the same replacement modules indexed for this vehicle.