ADAS coverage
This 2018 Jeep Compass page documents 5 ADAS systems, including Forward Camera (Monocular) - FCW/LDW, Forward Radar (77GHz) - ACC/AEB, Blind Spot Monitor (BSM), and Rear View Camera.
View ADAS data 3,200+ Vehicles Supported
1-Year Unlimited Guarantee
DFW Mobile Service
DFW Serving Dallas / Fort Worth
2018 Jeep Compass Supported Services
2018 Jeep Compass
ADAS calibration, module programming, and security relearns
All trims equipped with Jeep Active Safety Group require forward camera recalibration after windshield replacement. Use WiTECH 2.0 with Stellantis SGW gateway bypass to confirm trim-level ADAS package and complete calibration procedure per OEM specification.
Technical snapshot
- Platform Stellantis SMALL US (FCA Small Wide, FWD/AWD)
- CAN Architecture HS-CAN (500 kbps); Stellantis CAN; OBD2 DLC Pin 6/14
- Security Stellantis PEPS; rolling code; wiTECH 2.0
What do you need fixed?
Choose a service to start your quote.
OVERVIEW
Expert ADAS calibration, module programming, and diagnostic recovery for the 2018 Jeep Compass. On this vehicle we cover documented systems include Forward Camera (Monocular) - FCW/LDW, Forward Radar (77GHz) - ACC/AEB, and Blind Spot Monitor (BSM), this Stellantis SMALL US (FCA Small Wide, FWD/AWD) platform vehicle, Stellantis PEPS Gen 2-3; SKREEM/BCM immobilizer immobilizer support, OEM-gateway-subscription work handled on our side. Mobile across the DFW Metroplex; mail-in module service is available nationwide.
Platform
Stellantis SMALL US (FCA Small Wide, FWD/AWD)
Production
2017-present
Trim Levels
All trims equipped with Jeep Active Safety Group require forward camera recalibration after windshield replacement. Use WiTECH 2.0 with Stellantis SGW gateway bypass to confirm trim-level ADAS package and complete calibration procedure per OEM specification.
Drivetrain
FWD / AWD
Engine
-
CAN Speed
HS-CAN (500 kbps); Stellantis CAN; OBD2 DLC Pin 6/14
Exact-year service summary for 2018 Jeep Compass
Calibration triggers
Documented calibration triggers include Windshield Replacement (Camera Equipped), Forward Camera Replacement, Front Bumper Repair or Replacement, and Rear Bumper Repair or Replacement. Use the ADAS tab for the full trigger list.
View triggersProgrammable modules
This page indexes 18 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and IPC coverage.
View modulesGateway and security
Security notes for this 2018 Jeep Compass include gateway type: Stellantis Secure Gateway (SGW); bypass method: OEM wiTECH/authorized SGW access; subscription: Yes.
View securityCore Auto Logic capability
Core Auto Logic supports exact-year diagnostics, ADAS calibration, module programming, and security-access planning for the 2018 Jeep Compass using the documented systems and module data on this page.
Choose a sectionWhat changes on this exact year
Feature availability
Jeep Active Safety: Forward Collision Warning with Automatic Emergency Braking, - Available; Platform: Stellantis SMALL US (FCA Small Wide, FWD/AWD) - Confirmed
Driver-assist suite
Jeep Active Safety: Forward Collision Warning with Automatic Emergency Braking, Blind Spot Detection, Rear Cross Path Detection, ParkSense rear, LaneSense
Infotainment context
Uconnect 4C 8.4"; Apple CarPlay/Android Auto
Network and access
CAN: HS-CAN (500 kbps); Stellantis CAN; OBD2 DLC Pin 6/14; gateway: Stellantis Secure Gateway (SGW); gateway subscription: Yes
Tool access for this exact year
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
Factory scan, coding, and calibration access
Stellantis wiTECH 2.0
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
Security gateway access required No practical workaround
ADAS scan, setup, and verification
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Bench cloning and chip-level recovery
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Choose a section to view data
SUPPORTED SYSTEMS
What we service on this vehicle
Documented module coverage for the 2018 Jeep Compass. Counts reflect modules our techs have programmed or calibrated on this exact platform.
ADAS Calibration
5 modules documented
Forward camera, radar, surround-view and lane-keep recalibration after windshield, suspension or fascia work.
Open ADAS tabEngine / ECU Programming
3 modules documented
Powertrain reprogramming, calibration updates, replacement ECU configuration and security access.
Open Modules tabBCM / Body Programming
1 module documented
Body control module, gateway and accessory programming. Includes feature-bit reconfiguration.
Open Modules tabTCU / Transmission
2 modules documented
Transmission control module reprogramming, adaptive learning reset and replacement TCM clone.
Open Modules tabSRS / Airbag Reset
6 modules documented
Crash-data clear, hard-code reset and replacement airbag module configuration.
Open Modules tabABS / Brake Module
1 module documented
ABS / EBCM bleed support, replacement module coding and yaw-rate sensor calibration.
Open Modules tabIPC, SAS & Other Modules
4 modules documented
Instrument cluster cloning, steering angle sensor calibration and other supporting modules.
Open Modules tabConnectivity & Accessories
1 module documented
Infotainment radio, surround view, remote start, trailer brake controller and other equipped systems.
Open Modules tabRecalibration Triggers
8 modules documented
Service events that require ADAS recalibration on this vehicle. Tap to see what triggers what.
Open ADAS tabNeed something not listed? Most undocumented modules can still be programmed.
Get a QuoteFeature availability 2
Jeep Active Safety: Forward Collision Warning with Automatic Emergency Braking
AvailableCalibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.
Platform: Stellantis SMALL US (FCA Small Wide, FWD/AWD)
ConfirmedVerify platform code matches when cross-referencing part numbers across model years.
WHAT WE RESOLVE
Common issues on this vehicle
Common Jeep Compass issues we resolve on this platform: Forward Camera (Monocular) - FCW/LDW, Forward Radar (77GHz) - ACC/AEB, Blind Spot Monitor (BSM), and Rear View Camera recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - Stellantis SMALL US (FCA Small Wide, FWD/AWD) platform uses HS-CAN (500 kbps); Stellantis CAN; OBD2 DLC Pin 6/14. Stellantis Secure Gateway (SGW) module faults requiring OEM subscription access for full read/write (handled on our side).
ADAS CALIBRATION MATRIX
ADAS systems on this vehicle
Jeep Active Safety: Forward Collision Warning with Automatic Emergency Braking, Blind Spot Detection, Rear Cross Path Detection, ParkSense rear, LaneSense
Scroll for part numbers and Details
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Forward Camera (Monocular) - FCW/LDW | Forward Camera | Camera | Static | YES | - | |
| Forward Radar (77GHz) - ACC/AEB | Forward Radar | Radar | Static + Dynamic | YES | - | |
| Blind Spot Monitor (BSM) | Side Radar | Radar | Static + Dynamic | YES | - | |
| Rear View Camera | Rear Camera | Camera | Static | YES | - | |
| ParkSense PDC (Ultrasonic) | Park Assist | Ultrasonic | None | YES | - |
ADAS SYSTEM
YES Supported
Identification
- System type
- Module category
- Sensor location
Part Numbers
- OEM
- Alternative
Calibration & Triggers
- Calibration type
- Programming approach
- Requires PMI
- Trigger events
Technical Notes
- Chip / MCU
- Service notes
Need this calibrated?
Get a quote for ADAS calibration WHEN IS CALIBRATION REQUIRED?
Triggers for ADAS recalibration
Windshield Replacement (Camera Equipped)
wiTECH ADAS guided static calibration required. Level surface, WSM target distance.
Forward Camera Replacement
wiTECH 2.0 static calibration mandatory. SGW bypass required.
Front Bumper Repair or Replacement
wiTECH radar alignment if forward radar equipped.
Rear Bumper Repair or Replacement
wiTECH BSM/RCTA initialization if equipped.
Airbag/SRS Deployment
ORC replacement only (no crash clear). wiTECH initialization post-install.
BCM Replacement
wiTECH 2.0 flash + PROXI alignment + all options config. SGW bypass required.
ECM Replacement
wiTECH 2.0 flash + DealerConnect calibration + PROXI alignment.
ABS/ESC Module Replacement
wiTECH init + 4-wheel bleed + SAS zero-point.
SRS Modules
Occupant Restraint Controller (ORC) P68186640AB
- Part number
- P68186640AB
- Location
- Under center console
- Manufacturer
- Continental
- Chip / MCU
- 95256
- Notes
- Requires Witech or compatible J2534 tool. ProxyAlignment may be required after module replacement. ORC VIN programming required.
Occupant Restraint Controller (ORC) P68186641AB
- Part number
- P68186641AB
- Location
- Under center console
- Manufacturer
- Continental
- Chip / MCU
- 95256
- Notes
- Requires Witech or compatible J2534 tool. ProxyAlignment may be required after module replacement. ORC VIN programming required.
Occupant Restraint Controller (ORC) P68186642AA
- Part number
- P68186642AA
- Location
- Under center console
- Manufacturer
- Continental
- Chip / MCU
- 95256
- Notes
- Requires Witech or compatible J2534 tool. ProxyAlignment may be required after module replacement. ORC VIN programming required.
Occupant Restraint Controller (ORC) P68186642AC
- Part number
- P68186642AC
- Location
- Under center console
- Manufacturer
- Continental
- Chip / MCU
- 95256
- Notes
- Requires Witech or compatible J2534 tool. ProxyAlignment may be required after module replacement. ORC VIN programming required.
Occupant Restraint Controller (ORC) P68204438AB
- Part number
- P68204438AB
- Location
- Under center console
- Manufacturer
- Continental
- Chip / MCU
- 95256
- Notes
- Requires Witech or compatible J2534 tool. ProxyAlignment may be required after module replacement. ORC VIN programming required.
Occupant Restraint Controller (ORC) P68232708AC
- Part number
- P68232708AC
- Location
- Under center console
- Manufacturer
- Continental
- Chip / MCU
- 95256
- Notes
- Requires Witech or compatible J2534 tool. ProxyAlignment may be required after module replacement. ORC VIN programming required.
ECU Modules
ECM/PCM - 2.4L Tigershark I4
- Protocol / method
- wiTECH 2.0 + Programming Port
- Coding required
- Yes
- Cloning supported
- No
- Notes
- wiTECH 2.0 flash programming via Programming Port + DealerConnect calibration download. PROXI alignment after replacement (VIN tie). PROXI alignment after replacement.
ECM/PCM - 1.3L Turbo GSE T4 (2020+)
- Protocol / method
- wiTECH 2.0 + Programming Port
- Coding required
- Yes
- Cloning supported
- No
- Notes
- wiTECH 2.0 flash programming via Programming Port + DealerConnect calibration download. PROXI alignment after replacement (VIN tie). PROXI alignment after replacement.
ECM/PCM - 4xe PHEV (2021+)
- Protocol / method
- wiTECH 2.0 + Programming Port
- Coding required
- Yes
- Cloning supported
- No
- Notes
- wiTECH 2.0 flash programming via Programming Port + DealerConnect calibration download. PROXI alignment after replacement (VIN tie). HV safety check before module R&R.
BCM Modules
Body Control Module (BCM)
- Security
- SKREEM/rolling code
- Coding required
- Yes
- Cloning supported
- No
- Notes
- wiTECH 2.0 flash programming + PROXI alignment after replacement. BCM holds VIN tie and module configuration. All vehicle options must be PROXI configured. SGW bypass required for programming access.
TCU / TCM Transmission Modules
TCU - Aisin AW6 6-Speed Auto 68293208
- Part number
- 68293208
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Renesas SH72546
- Notes
- Requires wiTECH or J2534 for programming. Mopar ATF+4 fluid spec. FWD models only. Adaptive relearn via drive cycle.
TCU - ZF 9HP48 9-Speed Auto 68293209
- Part number
- 68293209
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Infineon TC1797
- Notes
- Requires wiTECH or J2534 for programming. ZF Lifeguard 8 fluid spec. AWD models. Adaptive relearn via drive cycle.
ABS / Brake Modules
ABS/ESC Module
- Cloning supported
- No
- Notes
- wiTECH ABS module initialization after replacement. 4-wheel brake bleed. SAS zero-point calibration. Verify ESC function DTC-free.
Other Modules (IPC, SAS)
Instrument Panel Cluster (IPC) 68345184AB
- Part number
- 68345184AB
- Cloning supported
- Yes
- Notes
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Instrument Panel Cluster (IPC) 68345185AB
- Part number
- 68345185AB
- Cloning supported
- Yes
- Notes
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Steering Angle Sensor (SAS)
- Coding required
- Yes
- Notes
- INTEGRATED (clock spring / steering column module
Steering Angle Sensor (SAS)
- Coding required
- Yes
- Notes
- cross-year extension)
Connectivity & Accessories
Uconnect Infotainment (8.4" (2017-2021) or 10.1" (2022+))
- Notes
- wiTECH radio programming/initialization if replaced. CarPlay/Android Auto pairing re-establishment post-swap.
ARCHITECTURE & CONNECTIVITY
Architecture & Connectivity
- Body Construction
- High-strength steel unibody
- OBD Protocol
- ISO 15765-4 CAN (500 kbps)
- CAN Architecture
- HS-CAN (500 kbps); Stellantis CAN; OBD2 DLC Pin 6/14
- Infotainment
- Uconnect 4C 8.4"; Apple CarPlay/Android Auto
- OTA Capable
- No
- Gateway Type
- Stellantis Secure Gateway (SGW)
- Gateway Bypass Method
- OEM wiTECH/authorized SGW access
- ECU/TCM Unlocking
- Contact us
- ECU/TCM Flashing
- Confirmed
Reviewed coverage: 2018 - 1.3L MultiAir III Turbo PHEV 4xe (46337540), 1.3L PHEV (46337540), 1.4L MultiAir (EAQ), 1.5L MultiAir II MHEV (46347813), 1.6L MultiJet II (46346020), 1.6L MultiJet II (55280444), 2.0L MultiJet II (55283099), 2.4L MultiAir2 Tigershark (ED6).
Confirm the exact engine, ECU, and any prerequisite access method before service.
FREQUENTLY ASKED QUESTIONS
FAQ
How much does ADAS calibration cost for a 2018 Jeep Compass?
ADAS calibration pricing for a 2018 Jeep Compass depends on which of its 5 documented systems need work after a repair. This vehicle is documented with Forward Camera (Monocular) - FCW/LDW, Forward Radar (77GHz) - ACC/AEB, Blind Spot Monitor (BSM), Rear View Camera, and ParkSense PDC (Ultrasonic). We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.
Can you reset the airbag light on a 2018 Jeep Compass?
Yes. The 2018 Jeep Compass uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: P68186640AB. Mobile diagnosis and programming are available in DFW, and mail-in module service is available nationwide. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.
What is needed after replacing the windshield on a 2018 Jeep Compass?
After windshield replacement on a 2018 Jeep Compass, Forward Camera (Monocular) - FCW/LDW, Forward Radar (77GHz) - ACC/AEB, and Rear View Camera rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in module service is available nationwide for eligible module work.
How long does a 2018 Jeep Compass module service take?
Most 2018 Jeep Compass onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 13 programmable modules documented in our database (3 ECU, 1 BCM, 2 TCU, 1 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module service is available nationwide.
Do you cover the 2018 Jeep Compass on-site, or is this mail-in only?
We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, post-repair recoding, and supported module work). Mail-in module service is available nationwide. The 2018 Jeep Compass uses Stellantis Secure Gateway (SGW) that requires an OEM subscription for full programming - we handle that on our side, no separate sign-up needed. Quote the work and we will confirm the active service path for the 2018 Jeep Compass. Do not ship a module unless support confirms next steps.
What kind of warranty do you offer on 2018 Jeep Compass programming?
Every programming, cloning, and calibration job on the 2018 Jeep Compass is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
Which modules on a 2018 Jeep Compass can you actually service?
We program, clone, repair, or replace the full programmable-module stack on a 2018 Jeep Compass. For this vehicle our database documents:
- 3 engine control (ECU/PCM)
- 2 transmission control (TCU/TCM)
- 1 body control (BCM and related)
- 1 ABS / brake control (EBCM)
- 1 immobilizer / security
- 1 key & fob
- 2 instrument cluster (IPC)
- 2 steering angle sensor (SAS)
- 5 ADAS module
Send the VIN and the operations performed and we will confirm support and pricing.
Additional Module Part Numbers
Additional OEM-sourced part numbers for the 2018 Jeep Compass covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.
- ADAS Module Part Numbers
- 68349510AC, 68406413AA
- ECU / PCM Part Numbers
- 68423762AA, 68423763AA
- TCU / TCM Part Numbers
- 68293208, 68293209
- SRS / Airbag Module Part Numbers
- P68186640AB, P68186641AB, P68186642AA, P68186642AC, P68204438AB, P68232708AC
- ABS / EBCM Part Numbers
- 68356021AB, 68356022AB
- Instrument Cluster (IPC) Part Numbers
- 68345184AB, 68345185AB
- Transmission Control Module (TCM) Part Numbers
- 68293208, 68293209
Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.
Different trim or build?
Send your VIN and we'll confirm exact module support and pricing in the quote response.
Hit a security wall? We've got the keys.
1-year unlimited warranty on every flash and calibration.
Shared module fitment
Vehicles sharing modules with the 2018 Jeep Compass
These vehicles use one or more of the same replacement modules indexed for this vehicle.
Finish the repair
Need help finishing this repair?
Get onsite help in Dallas-Fort Worth. Ask about same-day availability or a one-time remote session for eligible non-VSP work.
wiTECH 2.0 Explore one-time factory coding and programming. We confirm the software and procedure for your vehicle. Module programming & recovery Replacing a module or dealing with a failed programming attempt? Send the part numbers and fault scan for review. Onsite tools & equipment Bring in a technician or ask about hourly, daily and weekly rentals where licensing and equipment availability allow.