VIN / Build Split
VIN pos 4-8 identifies model/trim/engine/restraint. Hyundai WMI: 5NP, KMH, 5NM. Position 4-5 = model. Position 10 = model year code.
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
DFW Mobile Service
DFW Serving Dallas / Fort Worth
2023 Hyundai Ioniq-6 Supported Services
2023 Hyundai Ioniq-6
ADAS calibration, module programming, and security relearns
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Technical snapshot
- Platform E-GMP (Electric Global Modular Platform) - CE1; 800V architecture; aerodynamic sedan
- CAN Architecture Hyundai CAN FD + dedicated HV CAN bus; OBD2 DLC ISO 15765-4 CAN
- Security Hyundai IMMO5 AES-256; Digital Key NFC (Limited); no OBD pin extraction; AKL requires GDS + Hyundai dealer authorization
What do you need fixed?
Choose a service to start your quote.
OVERVIEW
Expert ADAS calibration, module programming, and diagnostic recovery for the 2023 Hyundai Ioniq-6. On this vehicle we cover documented systems include Forward Camera (Monocular), Forward Radar (77GHz), and Blind Spot Monitor Sensor - Left (BSM), this E-GMP (Electric Global Modular Platform) - CE1; 800V architecture; aerodynamic sedan platform vehicle, Hyundai IMMO5 (AES-256) immobilizer support, Hyundai ccNC infotainment programming. Mobile across the DFW Metroplex; mail-in module service is available nationwide.
Platform
E-GMP (Electric Global Modular Platform) - CE1; 800V architecture; aerodynamic sedan
Production
2023-present
Trim Levels
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Drivetrain
RWD / AWD
Engine
-
CAN Speed
Hyundai CAN FD + dedicated HV CAN bus; OBD2 DLC ISO 15765-4 CAN
YEAR-SPECIFIC NOTES
Infotainment
Hyundai ccNC
Exact-year service summary for 2023 Hyundai Ioniq-6
ADAS coverage
This 2023 Hyundai Ioniq-6 page documents 6 ADAS systems, including Forward Camera (Monocular), Forward Radar (77GHz), Blind Spot Monitor Sensor - Left (BSM), and Blind Spot Monitor Sensor - Right (BSM).
View ADAS dataCalibration triggers
Documented calibration triggers include Windshield Replacement, Forward Camera Replacement, Front Bumper / Radar Repair or Replacement, and Rear Bumper / BSM Sensor Replacement. Use the ADAS tab for the full trigger list.
View triggersProgrammable modules
This page indexes 33 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and IPC coverage.
View modulesGateway and security
This page includes 6 gateway, immobilizer, or key-security records for this 2023 Hyundai Ioniq-6.
View securityCore Auto Logic capability
Core Auto Logic supports exact-year diagnostics, ADAS calibration, module programming, and security-access planning for the 2023 Hyundai Ioniq-6 using the documented systems and module data on this page.
Choose a sectionWhat changes on this exact year
Feature availability
Hyundai SmartSense standard all trims: Forward Collision Alert, Lane Keeping Ass - Standard; Platform: E-GMP (Electric Global Modular Platform) - Confirmed
Driver-assist suite
Hyundai SmartSense standard all trims: Forward Collision Alert, Lane Keeping Assist, Smart Cruise Control, Blind-Spot Collision Warning, Rear Cross-Traffic Collision Avoidance, Parking Collision Avoidance (standard all trims); Highway Driving Assist 2 standard on SEL and above
VIN and build split
VIN pos 4-8 identifies model/trim/engine/restraint. Hyundai WMI: 5NP, KMH, 5NM. Position 4-5 = model. Position 10 = model year code.
Infotainment context
Hyundai ccNC; Dual 12" touchscreen + cluster display; Hyundai Bluelink connected services; OTA software updates; wireless CarPlay/Android Auto
Network and access
CAN: Hyundai CAN FD + dedicated HV CAN bus; OBD2 DLC ISO 15765-4 CAN
Tool access for this exact year
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
Factory scan, coding, and calibration access
Hyundai GDS Mobile / Hyundai KDS
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
ADAS scan, setup, and verification
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Bench cloning and chip-level recovery
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Choose a section to view data
SUPPORTED SYSTEMS
What we service on this vehicle
Documented module coverage for the 2023 Hyundai Ioniq-6. Counts reflect modules our techs have programmed or calibrated on this exact platform.
ADAS Calibration
6 modules documented
Forward camera, radar, surround-view and lane-keep recalibration after windshield, suspension or fascia work.
Open ADAS tabEngine / ECU Programming
6 modules documented
Powertrain reprogramming, calibration updates, replacement ECU configuration and security access.
Open Modules tabBCM / Body Programming
3 modules documented
Body control module, gateway and accessory programming. Includes feature-bit reconfiguration.
Open Modules tabTCU / Transmission
2 modules documented
Transmission control module reprogramming, adaptive learning reset and replacement TCM clone.
Open Modules tabSRS / Airbag Reset
10 modules documented
Crash-data clear, hard-code reset and replacement airbag module configuration.
Open Modules tabABS / Brake Module
4 modules documented
ABS / EBCM bleed support, replacement module coding and yaw-rate sensor calibration.
Open Modules tabIPC, SAS & Other Modules
3 modules documented
Instrument cluster cloning, steering angle sensor calibration and other supporting modules.
Open Modules tabConnectivity & Accessories
5 modules documented
Infotainment radio, surround view, remote start, trailer brake controller and other equipped systems.
Open Modules tabRecalibration Triggers
14 modules documented
Service events that require ADAS recalibration on this vehicle. Tap to see what triggers what.
Open ADAS tabNeed something not listed? Most undocumented modules can still be programmed.
Get a QuoteFeature availability 2
Hyundai SmartSense standard all trims: Forward Collision Alert, Lane Keeping Ass
StandardCalibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.
Platform: E-GMP (Electric Global Modular Platform)
ConfirmedVerify platform code matches when cross-referencing part numbers across model years.
WHAT WE RESOLVE
Common issues on this vehicle
Common Hyundai Ioniq-6 issues we resolve on this platform: Forward Camera (Monocular), Forward Radar (77GHz), Blind Spot Monitor Sensor - Left (BSM), and Blind Spot Monitor Sensor - Right (BSM) recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - E-GMP (Electric Global Modular Platform) - CE1; 800V architecture; aerodynamic sedan platform uses Hyundai CAN FD + dedicated HV CAN bus; OBD2 DLC ISO 15765-4 CAN.
ADAS CALIBRATION MATRIX
ADAS systems on this vehicle
Hyundai SmartSense standard all trims: Forward Collision Alert, Lane Keeping Assist, Smart Cruise Control, Blind-Spot Collision Warning, Rear Cross-Traffic Collision Avoidance, Parking Collision Avoidance (standard all trims); Highway Driving Assist 2 standard on SEL and above
Scroll for part numbers and Details
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Forward Camera (Monocular) | Camera | ADAS | Static | YES | ~99210-KL000 (CE1-SPECIFIC - (VERIFY VIA OUR DIAGNOSTIC SOFTWARE), DO NOT USE NE1 | |
| Forward Radar (77GHz) | Radar | ADAS | Static + Dynamic | YES | ~99110-KL000 (CE1-SPECIFIC - (VERIFY VIA OUR DIAGNOSTIC SOFTWARE), DO NOT USE NE1 | |
| Blind Spot Monitor Sensor - Left (BSM) | Radar | ADAS | Static + Dynamic | YES | ~99140-KL000 (CE1-SPECIFIC - (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Blind Spot Monitor Sensor - Right (BSM) | Radar | ADAS | Static + Dynamic | YES | ~99150-KL000 (CE1-SPECIFIC - (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Highway Driving Assist 2 (HDA 2) | Software | ADAS | None | YES | - | |
| Parking Collision-Avoidance Assist (PCA) | Radar | ADAS | Static | YES | - |
ADAS SYSTEM
YES Supported
Identification
- System type
- Module category
- Sensor location
Part Numbers
- OEM
- Alternative
Calibration & Triggers
- Calibration type
- Programming approach
- Requires PMI
- Trigger events
Technical Notes
- Chip / MCU
- Service notes
Need this calibrated?
Get a quote for ADAS calibration WHEN IS CALIBRATION REQUIRED?
Triggers for ADAS recalibration
Windshield Replacement
SmartSense forward camera static calibration required after any windshield replacement. GDS ADAS calibration menu: guided procedure. Level surface required. CE1-specific target pattern required - verify exact distance (approx. 2.5m from vehicle front center) and confirm correct CE1 target in GDS ADAS calibration screen before placing target. Do not use NE1 or generic targets for CE1. Verify all SmartSense DTC-free after calibration.
Forward Camera Replacement
GDS ADAS guided static calibration. CE1-specific camera (~99210-KL000) and CE1-specific target required. Camera initialization + calibration in GDS. Verify FCA, LKAS, HDA 2 (SEL+) active and DTC-free. Do NOT order NE1/GI-suffix camera for CE1.
Front Bumper / Radar Repair or Replacement
GDS radar alignment + ADAS calibration after bumper removal or radar replacement. CE1-specific radar (~99110-KL000). Inspect mounting bracket before calibration. Verify FCA and Smart Cruise DTC-free after calibration.
Rear Bumper / BSM Sensor Replacement
CE1-specific BSD sensors (~99140/99150-KL000). GDS BSD initialization for replaced sensor(s). Function test: BCW and RCCA detection with adjacent object. DTC clear. Road verify at 20+ mph.
iBooster + ESC Module Replacement
GDS automated EV brake bleeding MANDATORY - special EV procedure required; standard manual bleed insufficient. GDS regen system initialization before final pedal feel check. SAS zero-point reset via GDS. Drive straight 35+ mph for SAS completion. Verify no ABS/ESC/VSM DTC.
Wheel Alignment / Steering Work
GDS SAS zero-point reset required after any alignment or steering component service. Drive straight 35+ mph. ESC/VSM warning remains until SAS learning complete.
VCU Replacement
HV SAFETY: HV service disconnect mandatory, 10-minute wait, HV PPE, verify HV <60V, trained HV-certified technician required. CE1-specific VCU (~36110-KL000). GDS VCU programming + VIN registration + IMMO5 coding. Do NOT use NE1/GI-suffix VCU. Verify no HV or powertrain DTC after programming.
MCU (Motor Control Unit) Replacement
HV SAFETY CRITICAL: 800V HV service disconnect MANDATORY before MCU removal. Minimum 10-minute wait. Verify HV <60V with HV-rated meter. HV PPE and insulated tools. Trained HV-certified technician only. CE1-specific MCU parts (KL suffix - ~36160-KL000 front, ~36165-KL000 rear AWD). Do NOT use NE1/GI-suffix MCU for CE1. GDS MCU programming after replacement. Road verify.
ICCU / OBC Replacement
HV SAFETY CRITICAL: same mandatory HV protocol as MCU. CE1-specific ICCU (~36610-KL000). GDS ICCU programming after installation. Verify AC Level 2 (10.9 kW) and DC fast charge (800V CCS1). Verify V2L on Long Range trims. Certified HV technician required.
BMS Replacement
HV SAFETY: mandatory HV disconnect, 10-minute wait, HV PPE. CE1-specific BMS - two variants: Standard Range 53 kWh and Long Range 77.4 kWh. Confirm exact battery pack via GDS VIN lookup before ordering. Do NOT use NE1/GI-suffix BMS for CE1. GDS BMS programming + cell balance verification. Verify no HV DTC after programming.
Smart Key ECU Replacement
GDS + dealer authorization. All customer Smart Keys must be present. All keys erased on ECU replacement. Re-register all keys via GDS. Digital Key (Limited): re-enrollment via GDS + Hyundai Digital Key server after Smart Key ECU programming. Verify all keys start vehicle.
Any Front-End Collision
Inspect and recalibrate forward camera after any front-end collision using GDS Mobile.
Forward Radar Replacement
Radar module replacement requires alignment/calibration using GDS Mobile.
Mirror Replacement
If BSD sensor is mirror-integrated, recalibration required. Verify sensor location; use GDS Mobile if applicable.
SRS Modules
SRS Control Module (SRSCM) 10 records
Under center console
- Part number
- 80310-KL000
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
Under center console
- Part number
- 11256-06201
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
Under center console
- Part number
- 11254-06201
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
Under center console
- Part number
- 80410-KL000
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
Under center console
- Part number
- 80420-KL000
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
Under center console
- Part number
- 80100-KL500-NNB
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
Under center console
- Part number
- 80100-KL500-RNE
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
Under center console
- Part number
- 80100-KL500-YTH
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
Under center console
- Part number
- 13271-06001
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
Under center console
- Part number
- 13385-08001
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
ECU Modules
VCU - Vehicle Control Unit ~36110-KL000 (CE1-SPECIFIC - VERIFY VIA GDS, DO NOT USE NE1
- Part number
- ~36110-KL000 (CE1-SPECIFIC - VERIFY VIA GDS, DO NOT USE NE1
- Notes
- CE1-specific VCU. GDS VCU programming + VIN registration + IMMO5 coding after replacement. HV SAFETY: HV service disconnect mandatory before VCU removal. 10-minute minimum wait. Verify HV
MCU - Motor Control Unit, Front (RWD + AWD) ~36160-KL000 (CE1-SPECIFIC - VERIFY VIA GDS)
- Part number
- ~36160-KL000 (CE1-SPECIFIC - VERIFY VIA GDS)
- Notes
- CE1-specific front MCU. HV SAFETY CRITICAL: 800V HV service disconnect MANDATORY before MCU removal. 10-minute wait minimum. Verify HV
MCU - Motor Control Unit, Rear (AWD only) ~36165-KL000 (CE1-SPECIFIC - VERIFY VIA GDS
- Part number
- ~36165-KL000 (CE1-SPECIFIC - VERIFY VIA GDS
- Notes
- CE1-specific rear MCU. Same mandatory HV safety protocol as front MCU. GDS programming after replacement. Road verify AWD function.
ICCU - Integrated Charging Control Unit ~36610-KL000 (CE1-SPECIFIC - VERIFY VIA GDS)
- Part number
- ~36610-KL000 (CE1-SPECIFIC - VERIFY VIA GDS)
- Notes
- CE1-specific ICCU. Controls AC onboard charging (max 10.9 kW AC; 800V DC up to 350 kW peak). HV SAFETY CRITICAL: HV service disconnect mandatory, 10-minute wait, HV PPE, trained certified HV technician required. GDS ICCU programming after replacement. Verify AC Level 2 charging and DC fast charge (800V CCS1) function. Verify V2L function if equipped.
Battery Management System (BMS) (CE1-SPECIFIC BMS - VERIFY VIA GDS, STANDARD RANGE 53 KWH VS LONG RANGE 77.4 KWH VARIANTS)
- Part number
- (CE1-SPECIFIC BMS - VERIFY VIA GDS, STANDARD RANGE 53 KWH VS LONG RANGE 77.4 KWH VARIANTS)
- Notes
- CE1-specific BMS - two battery pack variants: Standard Range 53 kWh and Long Range 77.4 kWh. HV SAFETY: HV disconnect mandatory. GDS BMS programming + cell balance verification. Verify no HV DTC after programming.
Dual 12" Display Unit (Infotainment + Cluster)
- Notes
- CE1 features integrated dual 12" displays (infotainment + digital cluster). GDS infotainment and cluster variant configuration after replacement. Bluelink OTA available. Verify cluster display operation after replacement.
BCM Modules
Body Control Module (BCM) ~95400-KL000 (CE1-SPECIFIC - VERIFY VIA GDS)
- Part number
- ~95400-KL000 (CE1-SPECIFIC - VERIFY VIA GDS)
- Notes
- CE1-specific BCM - do NOT use NE1/GI-suffix part. GDS programming + full variant configuration required after replacement. All options and build codes must match VIN. Digital Key (NFC) configuration required on Limited-equipped vehicles. Verify VIN-tie in GDS after programming.
Smart Key ECU (CE1-SPECIFIC SMART KEY ECU - VERIFY VIA GDS)
- Part number
- (CE1-SPECIFIC SMART KEY ECU - VERIFY VIA GDS)
- Notes
- Manages Smart Key RF pairing and IMMO5 communication. Replacement: GDS + Hyundai dealer authorization. All previously registered keys erased on ECU replacement - all customer keys required. Digital Key (Limited) must be re-enrolled after Smart Key ECU replacement via GDS + Hyundai Digital Key server.
Digital Key System (NFC, Limited trim)
- Notes
- NFC phone-as-key standard on Limited. GDS + Hyundai Digital Key server + customer smartphone with Hyundai app required for enrollment and re-enrollment. Cannot be performed without server connectivity. Advise customer of server dependency before BCM or Smart Key ECU replacement on Limited-equipped vehicles.
TCU / TCM Transmission Modules
N/A - Single Speed / No TCU
- Protocol / method
- Virgin Flash
- Coding required
- No
- Cloning supported
- No
- Chip / MCU
- N/A
- Notes
- Pure EV with single-speed reduction gearbox, no traditional TCU present. Motor control handled by inverter/VCU.
N/A - Single Speed / No TCU
- Protocol / method
- Virgin
- Coding required
- No
- Cloning supported
- No
- Chip / MCU
- N/A
- Notes
- Pure EV with single-speed reduction gearbox, no traditional TCU present. Motor control handled by inverter/VCU.
ABS / Brake Modules
iBooster + ESC Integrated Module (Regenerative Braking) ~58910-KL000 (CE1-SPECIFIC - VERIFY VIA GDS)
- Part number
- ~58910-KL000 (CE1-SPECIFIC - VERIFY VIA GDS)
- Notes
- CE1-specific integrated iBooster + ESC with regenerative braking coordination. GDS automated EV brake bleeding MANDATORY - special EV brake bleeding procedure required; standard manual bleed is NOT sufficient. GDS regen system initialization required before final brake pedal feel verification. SAS zero-point calibration required after replacement. Drive straight on level road at 35+ mph for SAS self-calibration. Verify DTC-free. CE1 body profile affects brake cooling - verify no brake thermal DTC after road test.
Steering Angle Sensor (SAS)
- Notes
- GDS SAS zero-point reset required after alignment, steering component, or ESC module replacement. Drive straight 35+ mph. ESC warning active until SAS calibration complete.
Wheel Speed Sensor - Front (each)
- Notes
- Active magnetic WSS. GDS DTC clear + road test at 15+ mph.
Other Modules (IPC, SAS)
Instrument Panel Cluster (IPC) 94013-KL010
- Part number
- 94013-KL010
- Cloning supported
- Yes
- Notes
- CE1 Ioniq 6 IPC 12.3" digital cluster standard
Instrument Panel Cluster (IPC) 94013-KL020
- Part number
- 94013-KL020
- Cloning supported
- Yes
- Notes
- CE1 IPC 12.3" digital cluster w/ AR HUD
Connectivity & Accessories
Hyundai Bluelink (Connected Services + OTA) (DCM - CE1-SPECIFIC)
- Part number
- (DCM - CE1-SPECIFIC)
- Notes
- OTA software updates, remote start, charge scheduling, charge status monitoring, stolen vehicle locate. Active Bluelink subscription required. DCM replacement: GDS network module registration.
Vehicle-to-Load (V2L) (V2L ADAPTER - EXTERNAL 120V OUTLET, ICCU ~36610-KL000)
- Part number
- (V2L ADAPTER - EXTERNAL 120V OUTLET, ICCU ~36610-KL000)
- Notes
- V2L standard on Ioniq 6 Long Range trims. Up to 3.6 kW 120V AC from HV battery via external V2L adapter. Managed by CE1-specific ICCU. After ICCU replacement: verify V2L function via GDS and physical test. HV SAFETY: V2L output is 120V AC from HV battery - treat with appropriate caution.
800V DC Fast Charging (350 kW peak) (ICCU ~36610-KL000
- Part number
- (ICCU ~36610-KL000
- Notes
- 800V DC fast charging up to 350 kW peak via CCS1. CE1 shares 800V E-GMP charging architecture with Ioniq 5. After ICCU or charge port replacement: verify DC fast charge function with suitable 800V DCFC station. HV SAFETY: charge port housing and ICCU handle 800V DC - certified HV technician required.
Parking Collision-Avoidance Assist (PCA) - Standard All Trims
- Notes
- PCA standard on ALL Ioniq 6 trims (unlike some other vehicles where PCA is trim-dependent). No static calibration for ultrasonics. GDS DTC verify.
Digital Key (NFC, Limited)
- Notes
- GDS + Hyundai Digital Key server + customer Hyundai app required. Cannot be programmed offline. Re-enrollment required after BCM or Smart Key ECU replacement on Limited-equipped vehicles.
ARCHITECTURE & CONNECTIVITY
Architecture & Connectivity
- Body Construction
- E-GMP dedicated EV unibody - Advanced High-Strength Steel (AHSS); aerodynamic sedan profile (Cd 0.21)
- OBD Protocol
- ISO 15765-4 CAN (500 kbps); HV system communication via GDS Programming Port
- CAN Architecture
- Hyundai CAN FD + dedicated HV CAN bus; OBD2 DLC ISO 15765-4 CAN
- Infotainment
- Dual 12" touchscreen + cluster display; Hyundai Bluelink connected services; OTA software updates; wireless CarPlay/Android Auto
- OTA Capable
- Yes
- Infotainment Name
- Hyundai ccNC
- ECU/TCM Unlocking
- Contact us
- ECU/TCM Flashing
- Contact us
OPENPILOT / COMMA.AI
Openpilot Compatibility
Not Supported
Officially supported (HDA II only)
- Package
- HDA II
- Hardware
- Comma 3X + Hyundai P harness
- Harness
- Hyundai P Harness (Can-FD)
Only HDA II variant in CARS.md. 2025+ unconfirmed.
FREQUENTLY ASKED QUESTIONS
FAQ
How much does ADAS calibration cost for a 2023 Hyundai Ioniq-6?
ADAS calibration pricing for a 2023 Hyundai Ioniq-6 depends on which of its 6 documented systems need work after a repair. This vehicle is documented with Forward Camera (Monocular), Forward Radar (77GHz), Blind Spot Monitor Sensor - Left (BSM), Blind Spot Monitor Sensor - Right (BSM), and Highway Driving Assist 2 (HDA 2). We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.
Can you reset the airbag light on a 2023 Hyundai Ioniq-6?
Yes. The 2023 Hyundai Ioniq-6 uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: 80310-KL000. Mobile diagnosis and programming are available in DFW, and mail-in module service is available nationwide. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.
What is needed after replacing the windshield on a 2023 Hyundai Ioniq-6?
After windshield replacement on a 2023 Hyundai Ioniq-6, Forward Camera (Monocular) and Forward Radar (77GHz) rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in module service is available nationwide for eligible module work.
How long does a 2023 Hyundai Ioniq-6 module service take?
Most 2023 Hyundai Ioniq-6 onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 25 programmable modules documented in our database (6 ECU, 3 BCM, 1 TCU, 4 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module service is available nationwide.
Do you cover the 2023 Hyundai Ioniq-6 on-site, or is this mail-in only?
We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, post-repair recoding, and supported module work). Mail-in module service is available nationwide. Quote the work and we will confirm the active service path for the 2023 Hyundai Ioniq-6. Do not ship a module unless support confirms next steps.
What kind of warranty do you offer on 2023 Hyundai Ioniq-6 programming?
Every programming, cloning, and calibration job on the 2023 Hyundai Ioniq-6 is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
Which modules on a 2023 Hyundai Ioniq-6 can you actually service?
We program, clone, repair, or replace the full programmable-module stack on a 2023 Hyundai Ioniq-6. For this vehicle our database documents:
- 6 engine control (ECU/PCM)
- 1 transmission control (TCU/TCM)
- 3 body control (BCM and related)
- 4 ABS / brake control (EBCM)
- 3 immobilizer / security
- 3 key & fob
- 2 instrument cluster (IPC)
- 1 steering angle sensor (SAS)
- 6 ADAS module
Infotainment on this platform: Hyundai ccNC. Send the VIN and the operations performed and we will confirm support and pricing.
Additional Module Part Numbers
Additional OEM-sourced part numbers for the 2023 Hyundai Ioniq-6 covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.
- ADAS Module Part Numbers
- DO NOT USE NE1
- ECU / PCM Part Numbers
- 39751-1XEN1, 39751-1XEN2
- BCM / Body Module Part Numbers
- ~95400-KL000 (CE1-SPECIFIC - VERIFY VIA GDS), (CE1-SPECIFIC SMART KEY ECU - VERIFY VIA GDS)
- SRS / Airbag Module Part Numbers
- 80310-KL000, 11256-06201, 11254-06201, 80410-KL000, 80420-KL000, 80100-KL500-NNB, 80100-KL500-RNE, 80100-KL500-YTH, 13271-06001, 13385-08001
- ABS / EBCM Part Numbers
- 58910-KL, MANDO IMEB ESC (IONIQ 6 E-GMP CE1)
- Instrument Cluster (IPC) Part Numbers
- 94013-KL010, 94013-KL020
Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.
Different trim or build?
Send your VIN and we'll confirm exact module support and pricing in the quote response.
Hit a security wall? We've got the keys.
1-year unlimited warranty on every flash and calibration.
Shared module fitment
Vehicles sharing modules with the 2023 Hyundai Ioniq 6
These vehicles use one or more of the same replacement modules indexed for this vehicle.
Finish the repair
Need help finishing this repair?
Get onsite help in Dallas-Fort Worth. Ask about same-day availability or a one-time remote session for eligible non-VSP work.
Factory programming software Explore one-time factory coding and programming. We confirm the software and procedure for your vehicle. Module programming & recovery Replacing a module or dealing with a failed programming attempt? Send the part numbers and fault scan for review. Onsite tools & equipment Bring in a technician or ask about hourly, daily and weekly rentals where licensing and equipment availability allow.