VIN / Build Split
VIN pos 4-8 identifies series/body/engine. GM WMI: 1GK (GMC SUV), 1GT (GMC truck). Position 8 = engine code. Position 10 = model year code.
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
DFW Mobile Service
DFW Serving Dallas / Fort Worth
2020 GMC Canyon Supported Services
2020 GMC Canyon
ADAS calibration, module programming, and security relearns
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Technical snapshot
- Platform GMT355
- CAN Architecture GMLAN HS-CAN 500kbps, MS-GMLAN 33.3kbps, LIN bus
- Security PassKey III+ (PKES) - SPS2 GDS2 required
What do you need fixed?
Choose a service to start your quote.
OVERVIEW
Expert ADAS calibration, module programming, and diagnostic recovery for the 2020 GMC Canyon. On this vehicle we cover documented systems include Forward Collision Alert / Automatic Emergency Braking, Lane Keep Assist / Lane Departure Warning (LKA/LDW), and Side Blind Zone Alert, this GMT355 platform vehicle, PassKey III+ immobilizer support, GMC Infotainment 3 infotainment programming. Mobile across the DFW Metroplex; mail-in module service is available nationwide.
Platform
GMT355
Production
2004-present
Trim Levels
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Drivetrain
RWD / 4WD
Engine
-
CAN Speed
GMLAN HS-CAN 500kbps, MS-GMLAN 33.3kbps, LIN bus
YEAR-SPECIFIC NOTES
Infotainment
GMC Infotainment 3
Exact-year service summary for 2020 GMC Canyon
ADAS coverage
This 2020 GMC Canyon page documents 3 ADAS systems, including Forward Collision Alert / Automatic Emergency Braking, Lane Keep Assist / Lane Departure Warning (LKA/LDW), and Side Blind Zone Alert.
View ADAS dataCalibration triggers
Documented calibration triggers include Windshield Replacement, Front Bumper Repair, Rear Bumper Repair, and Any Collision. Use the ADAS tab for the full trigger list.
View triggersProgrammable modules
This page indexes 22 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and IPC coverage.
View modulesGateway and security
This page includes 8 gateway, immobilizer, or key-security records for this 2020 GMC Canyon.
View securityCore Auto Logic capability
Core Auto Logic supports exact-year diagnostics, ADAS calibration, module programming, and security-access planning for the 2020 GMC Canyon using the documented systems and module data on this page.
Choose a sectionWhat changes on this exact year
Feature availability
Forward Collision Alert+Automatic Emergency Braking, Lane Keeping Assist, Lane D - Available; Platform: GMT355 - Confirmed
Driver-assist suite
Forward Collision Alert+Automatic Emergency Braking, Lane Keeping Assist, Lane Departure Warning, Side Blind Zone Alert - RPO UHX/UAG/UEU/UFG
VIN and build split
VIN pos 4-8 identifies series/body/engine. GM WMI: 1GK (GMC SUV), 1GT (GMC truck). Position 8 = engine code. Position 10 = model year code.
Infotainment context
GMC Infotainment 3; GMC IntelliLink - 8 inch
Network and access
CAN: GMLAN HS-CAN 500kbps, MS-GMLAN 33.3kbps, LIN bus
Tool access for this exact year
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
Factory scan, coding, and calibration access
GM GDS2 / GM Tech2Win / GM MDI 2
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
ADAS scan, setup, and verification
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Bench cloning and chip-level recovery
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Choose a section to view data
SUPPORTED SYSTEMS
What we service on this vehicle
Documented module coverage for the 2020 GMC Canyon. Counts reflect modules our techs have programmed or calibrated on this exact platform.
ADAS Calibration
3 modules documented
Forward camera, radar, surround-view and lane-keep recalibration after windshield, suspension or fascia work.
Open ADAS tabEngine / ECU Programming
3 modules documented
Powertrain reprogramming, calibration updates, replacement ECU configuration and security access.
Open Modules tabBCM / Body Programming
1 module documented
Body control module, gateway and accessory programming. Includes feature-bit reconfiguration.
Open Modules tabGateway / Security Access
6 modules documented
Secure gateway module identification, bypass workflow and security-access planning before programming.
Open Security tabTCU / Transmission
1 module documented
Transmission control module reprogramming, adaptive learning reset and replacement TCM clone.
Open Modules tabSRS / Airbag Reset
11 modules documented
Crash-data clear, hard-code reset and replacement airbag module configuration.
Open Modules tabABS / Brake Module
1 module documented
ABS / EBCM bleed support, replacement module coding and yaw-rate sensor calibration.
Open Modules tabIPC, SAS & Other Modules
3 modules documented
Instrument cluster cloning, steering angle sensor calibration and other supporting modules.
Open Modules tabConnectivity & Accessories
2 modules documented
Infotainment radio, surround view, remote start, trailer brake controller and other equipped systems.
Open Modules tabRecalibration Triggers
5 modules documented
Service events that require ADAS recalibration on this vehicle. Tap to see what triggers what.
Open ADAS tabNeed something not listed? Most undocumented modules can still be programmed.
Get a QuoteFeature availability 2
Forward Collision Alert+Automatic Emergency Braking, Lane Keeping Assist, Lane D
AvailableCalibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.
Platform: GMT355
ConfirmedVerify platform code matches when cross-referencing part numbers across model years.
WHAT WE RESOLVE
Common issues on this vehicle
Common GMC Canyon issues we resolve on this platform: Forward Collision Alert / Automatic Emergency Braking, Lane Keep Assist / Lane Departure Warning (LKA/LDW), and Side Blind Zone Alert recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - GMT355 platform uses GMLAN HS-CAN 500kbps, MS-GMLAN 33.3kbps, LIN bus.
ADAS CALIBRATION MATRIX
ADAS systems on this vehicle
Forward Collision Alert+Automatic Emergency Braking, Lane Keeping Assist, Lane Departure Warning, Side Blind Zone Alert - RPO UHX/UAG/UEU/UFG
Scroll for part numbers and Details
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Forward Collision Alert / Automatic Emergency Braking | Front Camera + Radar | Fused | Static | YES | 84280500 | |
| Lane Keep Assist / Lane Departure Warning (LKA/LDW) | Forward Camera | Camera | Static | YES | 84280500 | |
| Side Blind Zone Alert | Side Radar | Radar | None | YES | 84280510 |
ADAS SYSTEM
YES Supported
Identification
- System type
- Module category
- Sensor location
Part Numbers
- OEM
- Alternative
Calibration & Triggers
- Calibration type
- Programming approach
- Requires PMI
- Trigger events
Technical Notes
- Chip / MCU
- Service notes
Need this calibrated?
Get a quote for ADAS calibration WHEN IS CALIBRATION REQUIRED?
Triggers for ADAS recalibration
Windshield Replacement Affected: FEC Camera, FCA, AEB, LKA, LDW
Static FEC calibration via GDS2. OEM glass recommended.
Front Bumper Repair Affected: Front Radar, FCA, AEB
Radar static aim via GDS2. Inspect bracket.
Rear Bumper Repair Affected: SBZA Sensors
PMI if sensors replaced. Drive-off self-cal.
Any Collision Affected: SDM, All ADAS, Airbags
Full scan. SDM crash clear. AT4: inspect off-road impact sensor mounting.
Any Module Replacement Affected: All programmed modules
SPS2 PMI mandatory. AT4 BCM config unique.
SRS Modules
Sensing & Diagnostic Module (SDM) 11 records
Under center console
- Part number
- 84624072
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
Under center console
- Part number
- 84624074
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
Under center console
- Part number
- 85132066
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
Under center console
- Part number
- 13520997
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
Under center console
- Part number
- 84064085
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
Under center console
- Part number
- 84285631
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
Under center console
- Part number
- 84285632
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
Under center console
- Part number
- 13576422
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
Under center console
- Part number
- 13504470
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
Under center console
- Part number
- 22886642
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
Under center console
- Part number
- 22886641
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
ECU Modules
ECM - 2.5L I4 (LCV) 12660000
- Part number
- 12660000
- Protocol / method
- OBD Programming Port
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Delco E78
- Notes
- SPS2 Programming Port GDS2.
ECM - 3.6L V6 (LGX) 12660001
- Part number
- 12660001
- Protocol / method
- OBD Programming Port
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Delco E78
- Notes
- SPS2 Programming Port.
ECM - 2.8L Duramax Diesel (LWN) 12660005
- Part number
- 12660005
- Protocol / method
- OBD Programming Port
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Delco E98 Diesel
- Notes
- RPO LWN. SPS2 Programming Port. DEF/DPF/EGR.
BCM Modules
Body Control Module (BCM) 84280540
- Part number
- 84280540
- Security
- PASS-Key III+
- Coding required
- Yes
- Cloning supported
- Yes
- Notes
- PassKey III+. SPS2 PMI. AT4 builds have off-road suspension mode RPO config in BCM. Preserve full RPO list.
TCU / TCM Transmission Modules
TCU - 8L90 8-Speed Auto 24282568
- Part number
- 24282568
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Continental MPC5775K
- Notes
- Requires TIS2WEB programming, transmission adaptive learn procedure, Dexron VI ATF, may need immobilizer sync
ABS / Brake Modules
Electronic Brake Control Module (EBCM) 84280550
- Part number
- 84280550
- Cloning supported
- Yes
- Notes
- SPS2 PMI. Automated bleed via GDS2.
Other Modules (IPC, SAS)
Instrument Panel Cluster (IPC) 84681080
- Part number
- 84681080
- Cloning supported
- Yes
- Notes
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Instrument Panel Cluster (IPC) 84686570
- Part number
- 84686570
- Cloning supported
- Yes
- Notes
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Steering Angle Sensor (SAS)
- Coding required
- Yes
- Notes
- INTEGRATED (SCM clock spring)
Connectivity & Accessories
ICS - IntelliLink (8 inch) 84280480
- Part number
- 84280480
- Notes
- SPS2 PMI. CarPlay/Android Auto. Bose audio available AT4/Denali.
Driver Information Center (DIC) 84280490
- Part number
- 84280490
- Notes
- SPS2 PMI. Mileage in BCM.
Gateway / Security Modules
Central Gateway Module
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- D70F3558(read-write)
- Notes
- Compatibility label: Buick. Central gateway routes CAN/CAN-FD/Ethernet between module domains. Replacement requires VIN write and as-built configuration load via OEM software (ODIS, FDRS, DTS Monaco, etc.).
Central Gateway Module
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- 2015- 1M12S
- Notes
- Compatibility label: CRUZE. Central gateway routes CAN/CAN-FD/Ethernet between module domains. Replacement requires VIN write and as-built configuration load via OEM software (ODIS, FDRS, DTS Monaco, etc.).
Central Gateway Module
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- 2015- 1M12S
- Notes
- Compatibility label: Cavalier. Central gateway routes CAN/CAN-FD/Ethernet between module domains. Replacement requires VIN write and as-built configuration load via OEM software (ODIS, FDRS, DTS Monaco, etc.).
Central Gateway Module
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- D70F3385(read-write)
- Notes
- Compatibility label: Chevrolet. Central gateway routes CAN/CAN-FD/Ethernet between module domains. Replacement requires VIN write and as-built configuration load via OEM software (ODIS, FDRS, DTS Monaco, etc.).
Central Gateway Module
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- 2015- 1M12S
- Notes
- Compatibility label: Excelle. Central gateway routes CAN/CAN-FD/Ethernet between module domains. Replacement requires VIN write and as-built configuration load via OEM software (ODIS, FDRS, DTS Monaco, etc.).
Central Gateway Module
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- 2015- 1M12S
- Notes
- Compatibility label: SAIL. Central gateway routes CAN/CAN-FD/Ethernet between module domains. Replacement requires VIN write and as-built configuration load via OEM software (ODIS, FDRS, DTS Monaco, etc.).
ARCHITECTURE & CONNECTIVITY
Architecture & Connectivity
- Body Construction
- Body-on-frame - high-strength steel
- OBD Protocol
- ISO 15765-4 CAN
- CAN Architecture
- GMLAN HS-CAN 500kbps, MS-GMLAN 33.3kbps, LIN bus
- Infotainment
- GMC IntelliLink - 8 inch
- OTA Capable
- No
- Infotainment Name
- GMC Infotainment 3
- ECU/TCM Unlocking
- Contact us
- ECU/TCM Flashing
- Confirmed
Reviewed coverage: 2020 - 2.5L EcoTec III 16v (LCV), 2.8L Duramax 16v (LWN), 3.0L V6 24v (LF1), 3.6L V6 24v (LFX), 3.6L V6 24v (LGX), 3.6L V6 24v (LGZ), 3.7L Vortec 20v (LLR), 5.3L V8 16v (LH6).
Confirm the exact engine, ECU, and any prerequisite access method before service.
OPENPILOT / COMMA.AI
Openpilot Compatibility
Not Supported
Not supported - canyon not in openpilot support tree
Not in openpilot support tree as of April 2026.
FREQUENTLY ASKED QUESTIONS
FAQ
How much does ADAS calibration cost for a 2020 GMC Canyon?
ADAS calibration pricing for a 2020 GMC Canyon depends on which of its 3 documented systems need work after a repair. This vehicle is documented with Forward Collision Alert / Automatic Emergency Braking, Lane Keep Assist / Lane Departure Warning (LKA/LDW), and Side Blind Zone Alert. We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.
Can you reset the airbag light on a 2020 GMC Canyon?
Yes. The 2020 GMC Canyon uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: 84624072. Mobile diagnosis and programming are available in DFW, and mail-in module service is available nationwide. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.
What is needed after replacing the windshield on a 2020 GMC Canyon?
After windshield replacement on a 2020 GMC Canyon, Forward Collision Alert / Automatic Emergency Braking and Lane Keep Assist / Lane Departure Warning (LKA/LDW) rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in module service is available nationwide for eligible module work.
How long does a 2020 GMC Canyon module service take?
Most 2020 GMC Canyon onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 18 programmable modules documented in our database (3 ECU, 1 BCM, 1 TCU, 1 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module service is available nationwide.
Do you cover the 2020 GMC Canyon on-site, or is this mail-in only?
We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, post-repair recoding, and supported module work). Mail-in module service is available nationwide. Quote the work and we will confirm the active service path for the 2020 GMC Canyon. Do not ship a module unless support confirms next steps.
What kind of warranty do you offer on 2020 GMC Canyon programming?
Every programming, cloning, and calibration job on the 2020 GMC Canyon is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
Which modules on a 2020 GMC Canyon can you actually service?
We program, clone, repair, or replace the full programmable-module stack on a 2020 GMC Canyon. For this vehicle our database documents:
- 3 engine control (ECU/PCM)
- 1 transmission control (TCU/TCM)
- 1 body control (BCM and related)
- 1 ABS / brake control (EBCM)
- 1 immobilizer / security
- 1 key & fob
- 2 instrument cluster (IPC)
- 1 steering angle sensor (SAS)
- 3 ADAS module
Infotainment on this platform: GMC Infotainment 3. Send the VIN and the operations performed and we will confirm support and pricing.
Additional Module Part Numbers
Additional OEM-sourced part numbers for the 2020 GMC Canyon covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.
- ADAS Module Part Numbers
- 84280500, 84280501, 84280510, 84280511
- ECU / PCM Part Numbers
- 12660000, 12660001, 12660005
- BCM / Body Module Part Numbers
- 84280540
- TCU / TCM Part Numbers
- 24282568
- SRS / Airbag Module Part Numbers
- 84624072, 84624074, 85132066, 13520997, 84064085, 84285631, 84285632, 13576422, 13504470, 22886642, 22886641
- ABS / EBCM Part Numbers
- 84280550
- Instrument Cluster (IPC) Part Numbers
- 84681080, 84686570
- Transmission Control Module (TCM) Part Numbers
- 24282568
Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.
Different trim or build?
Send your VIN and we'll confirm exact module support and pricing in the quote response.
Hit a security wall? We've got the keys.
1-year unlimited warranty on every flash and calibration.
Shared module fitment
Vehicles sharing modules with the 2020 GMC Canyon
These vehicles use one or more of the same replacement modules indexed for this vehicle.
Finish the repair
Need help finishing this repair?
Get onsite help in Dallas-Fort Worth. Ask about same-day availability or a one-time remote session for eligible non-VSP work.
GM SPS2 Explore one-time factory coding and programming. We confirm the software and procedure for your vehicle. Module programming & recovery Replacing a module or dealing with a failed programming attempt? Send the part numbers and fault scan for review. Onsite tools & equipment Bring in a technician or ask about hourly, daily and weekly rentals where licensing and equipment availability allow.