Electronic systems coverage
This 2008 Ford F350 page does not list sensor-system records yet; module, security, and programming support is confirmed by VIN before service.
View systems 3,200+ Vehicles Supported
1-Year Unlimited Guarantee
DFW Mobile Service
DFW Serving Dallas / Fort Worth
2008 Ford F350 Supported Services
2008 Ford F350
ADAS calibration, module programming, and security relearns
Full ADAS calibration, module programming, and key security work for the 2008 Ford F350. Mail-in module service is available nationwide. Exact service eligibility is confirmed from the year, VIN, module, and requested scope.
Technical snapshot
- Platform P473 (SuperDuty Gen2, 2008-2016)
- CAN Architecture HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
- Security Ford PATS Gen 4-5 (Texas Instruments DST-80 80-bit transponder); SecuriLock passive anti-theft; no OBD PIN extraction; AKL requires FDRS PIN or dealer authorization
What do you need fixed?
Choose a service to start your quote.
OVERVIEW
Expert ADAS calibration, module programming, and diagnostic recovery for the 2008 Ford F350. On this vehicle we cover documented systems include Rear View Camera, Blind Spot Monitoring, and Forward Collision Warning / AEB, this P473 (SuperDuty Gen2, 2008-2016) platform vehicle, PATS / Smart Key immobilizer support. Mobile across the DFW Metroplex; mail-in module service is available nationwide.
Platform
P473 (SuperDuty Gen2, 2008-2016)
Production
1999-present
Trim Levels
-
Drivetrain
RWD / 4WD
Engine
-
CAN Speed
HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
Exact-year service summary for 2008 Ford F350
Programmable modules
This page indexes 16 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and SAS coverage.
View modulesGateway and security
This page includes 3 gateway, immobilizer, or key-security records for this 2008 Ford F350.
View securityCore Auto Logic capability
Core Auto Logic supports exact-year diagnostics, module programming, and security-access planning for the 2008 Ford F350 using the documented module data on this page.
Choose a sectionWhat changes on this exact year
Feature availability
Platform: P473 (SuperDuty Gen2, 2008-2016) - Confirmed
Driver-assist suite
No full ADAS suite - pre-Co-Pilot360 generation. Optional rear camera; Blind Spot Information System optional on upper trims; no standard Automatic Emergency Braking.
Infotainment context
Ford SYNC 1 (4.2" display); voice commands; Bluetooth; USB/Aux
Network and access
CAN: HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
Tool access for this exact year
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
Factory scan, coding, and calibration access
Ford IDS / Ford FDRS
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
Ford-family configuration and service functions
FORScan
Useful for supported configuration and diagnostics; factory programming still moves to OEM software when required.
ADAS scan, setup, and verification
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Bench cloning and chip-level recovery
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Choose a section to view data
SUPPORTED SYSTEMS
What we service on this vehicle
Documented module coverage for the 2008 Ford F350. Counts reflect modules our techs have programmed or calibrated on this exact platform.
Engine / ECU Programming
3 modules documented
Powertrain reprogramming, calibration updates, replacement ECU configuration and security access.
Open Modules tabBCM / Body Programming
1 module documented
Body control module, gateway and accessory programming. Includes feature-bit reconfiguration.
Open Modules tabTCU / Transmission
2 modules documented
Transmission control module reprogramming, adaptive learning reset and replacement TCM clone.
Open Modules tabSRS / Airbag Reset
3 modules documented
Crash-data clear, hard-code reset and replacement airbag module configuration.
Open Modules tabABS / Brake Module
3 modules documented
ABS / EBCM bleed support, replacement module coding and yaw-rate sensor calibration.
Open Modules tabIPC, SAS & Other Modules
2 modules documented
Instrument cluster cloning, steering angle sensor calibration and other supporting modules.
Open Modules tabConnectivity & Accessories
2 modules documented
Infotainment radio, surround view, remote start, trailer brake controller and other equipped systems.
Open Modules tabNeed something not listed? Most undocumented modules can still be programmed.
Feature availability 1
Platform: P473 (SuperDuty Gen2, 2008-2016)
ConfirmedVerify platform code matches when cross-referencing part numbers across model years.
WHAT WE RESOLVE
Common issues on this vehicle
Common Ford F350 issues we resolve on this platform: Rear View Camera, Blind Spot Monitoring, and Forward Collision Warning / AEB recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - P473 (SuperDuty Gen2, 2008-2016) platform uses HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14.
ADAS CALIBRATION MATRIX
ADAS systems on this vehicle
No full ADAS suite - pre-Co-Pilot360 generation. Optional rear camera; Blind Spot Information System optional on upper trims; no standard Automatic Emergency Braking.
Scroll for part numbers and Details
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Rear View Camera | Rear Camera | Camera | None | YES | - | |
| Blind Spot Monitoring | Radar | ADAS | Static | Conditional | - | |
| Forward Collision Warning / AEB | Camera | ADAS | Static | Conditional | - |
ADAS SYSTEM
YES Supported
Identification
- System type
- Module category
- Sensor location
Part Numbers
- OEM
- Alternative
Calibration & Triggers
- Calibration type
- Programming approach
- Requires PMI
- Trigger events
Technical Notes
- Chip / MCU
- Service notes
Need this calibrated?
WHEN IS CALIBRATION REQUIRED?
Triggers for ADAS recalibration
PCM Replacement
IDS as-built data download + PATS parameter reset required.
ABS Module Replacement
IDS ABS bleed procedure + WSS relearn.
SRS Modules
Airbag Control Module (ACM)
- Protocol / method
- OBD
- Cloning supported
- Yes
- Notes
- After any airbag deployment, the ACM stores crash data (hard codes). The module must be reset or replaced before the SRS system will function. Our equipment supports hard code clearing on most makes and models without dealer involvement.
Driver Airbag Module
- Protocol / method
- None
- Cloning supported
- No
- Notes
- Steering wheel airbag must be replaced after deployment. Clock spring (spiral cable) must also be inspected and replaced if damaged.
Passenger Airbag Module
- Protocol / method
- None
- Cloning supported
- No
- Notes
- Dashboard passenger airbag must be replaced after deployment. Dashboard assembly typically requires removal for access.
ECU Modules
Powertrain Control Module (PCM) - 5.4L 3V SOHC Modular V8 8C3A-12A650-ADA
- Part number
- 8C3A-12A650-ADA
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
Engine Control Module (ECM) - 6.4L Power Stroke Diesel V8 Twin-Turbo 8C3A-12A650-CJK
- Part number
- 8C3A-12A650-CJK
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
- Notes
- DC Diesel TX lists 8C3A-12A650-CJK for 08-10 F-250/F-350 6.4L; same module as F-250 2008 diesel per shared P356 Super Duty platform.
Engine Control Module (ECM) - 6.8L 3V SOHC V10 Modular 8C3A-12A650-BFD
- Part number
- 8C3A-12A650-BFD
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
- Notes
- F-350 shares P356 Super Duty platform with F-250; same 8C3A-12A650-BFD/CRE family applies; Tasca lists 8C3Z-12A650-CVERM as service replacement.
BCM Modules
BCM (Body Control Module)
- Notes
- Ford BCM. IDS/FDRS programming after replacement. PATS relearn required if equipped.
TCU / TCM Transmission Modules
TCU - 5R110W 5-Speed Auto 8C3A-7H105
- Part number
- 8C3A-7H105
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Continental Temic
- Notes
- Requires Ford IDS/FDRS programming, transmission relearn via drive cycle, Mercon SP ATF, VIN coding mandatory
TCU - 6R140 6-Speed Auto 9C3A-7H105
- Part number
- 9C3A-7H105
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Continental Temic
- Notes
- Requires Ford IDS programming, adaptive learning drive cycle, Mercon SP ATF, engine/transmission pairing critical
ABS / Brake Modules
ABS/ESC Control Module (ABSCM)
- Notes
- Ford ABS module. IDS bleeding procedure after replacement. Wheel speed sensor relearn.
Wheel Speed Sensor - Front (each)
- Notes
- Hall-effect sensor. Replace if DTC C1145/C1155 set.
Other Modules (IPC, SAS)
Steering Angle Sensor (SAS)
- Coding required
- Yes
- Notes
- INTEGRATED (clock spring / steering column module
Steering Angle Sensor (SAS)
- Coding required
- Yes
- Notes
- cross-year extension)
Connectivity & Accessories
Instrument cluster, trailer brake, upfitter, and body options - if equipped VERIFY EXACT F350 IPC
- Part number
- VERIFY EXACT F350 IPC
- Notes
- Verify cluster, trailer brake, upfitter switch, parking aid, and body-option modules by VIN. Follow Ford service information for PMI, as-built restore, initialization, and DTC checks.
ARCHITECTURE & CONNECTIVITY
Architecture & Connectivity
- Body Construction
- Body-on-frame; high-strength steel frame; F-350 SRW or DRW; confirm SRW/DRW before any ABS module order
- OBD Protocol
- ISO 15765-4 CAN (500 kbps)
- CAN Architecture
- HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
- Infotainment
- Ford SYNC 1 (4.2" display); voice commands; Bluetooth; USB/Aux
- OTA Capable
- No
- ECU/TCM Unlocking
- Contact us
- ECU/TCM Flashing
- Confirmed
Reviewed coverage: 2008 - 6.8L Modular V10.
Confirm the exact engine, ECU, and any prerequisite access method before service.
FREQUENTLY ASKED QUESTIONS
FAQ
How much does ADAS calibration cost for a 2008 Ford F350?
ADAS calibration pricing for a 2008 Ford F350 depends on which of its 3 documented systems need work after a repair. This vehicle is documented with Rear View Camera, Blind Spot Monitoring, and Forward Collision Warning / AEB. We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.
Can you reset the airbag light on a 2008 Ford F350?
Yes. The 2008 Ford F350 uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Mobile diagnosis and programming are available in DFW, and mail-in module service is available nationwide. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.
What is needed after replacing the windshield on a 2008 Ford F350?
After windshield replacement on a 2008 Ford F350, Rear View Camera and Forward Collision Warning / AEB rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in module service is available nationwide for eligible module work.
How long does a 2008 Ford F350 module service take?
Most 2008 Ford F350 onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 14 programmable modules documented in our database (3 ECU, 1 BCM, 2 TCU, 3 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module service is available nationwide.
Do you cover the 2008 Ford F350 on-site, or is this mail-in only?
We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, post-repair recoding, and supported module work). Mail-in module service is available nationwide. Quote the work and we will confirm the active service path for the 2008 Ford F350. Do not ship a module unless support confirms next steps.
What kind of warranty do you offer on 2008 Ford F350 programming?
Every programming, cloning, and calibration job on the 2008 Ford F350 is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
Which modules on a 2008 Ford F350 can you actually service?
We program, clone, repair, or replace the full programmable-module stack on a 2008 Ford F350. For this vehicle our database documents:
- 3 engine control (ECU/PCM)
- 2 transmission control (TCU/TCM)
- 1 body control (BCM and related)
- 3 ABS / brake control (EBCM)
- 1 immobilizer / security
- 2 key & fob
- 2 steering angle sensor (SAS)
- 3 ADAS module
Send the VIN and the operations performed and we will confirm support and pricing.
Additional Module Part Numbers
Additional OEM-sourced part numbers for the 2008 Ford F350 covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.
- ECU / PCM Part Numbers
- 8C3A-12A650-ADA, 8C3A-12A650-CJK, 8C3A-12A650-BFD
- TCU / TCM Part Numbers
- 8C3A-7H105, 9C3A-7H105
- Transmission Control Module (TCM) Part Numbers
- 8C3A-7H105, 9C3A-7H105
Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.
Different trim or build?
Send your VIN and we'll confirm exact module support and pricing in the quote response.
Hit a security wall? We've got the keys.
1-year unlimited warranty on every flash and calibration.
Shared module fitment
Vehicles sharing modules with the 2008 Ford F350
These vehicles use one or more of the same replacement modules indexed for this vehicle.
Finish the repair
Need help finishing this repair?
Get onsite help in Dallas-Fort Worth. Ask about same-day availability or a one-time remote session for eligible non-VSP work.
FDRS Explore one-time factory coding and programming. We confirm the software and procedure for your vehicle. Module programming & recovery Replacing a module or dealing with a failed programming attempt? Send the part numbers and fault scan for review. Onsite tools & equipment Bring in a technician or ask about hourly, daily and weekly rentals where licensing and equipment availability allow.