Immobilizer: PATS / Smart Key
StandardKey programming requires manufacturer-level tool access. Add key supported. All keys lost (AKL) supported.
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
Same-Day Mobile Service
DFW Serving Dallas / Fort Worth
2008-2010 Ford F-350 Generation Guide
Ford F-350 Super Duty 2nd Gen (2008-2010) ADAS Calibration & Module Programming
Covers model years 2008-2010 - one service guide for the whole generation.
Full ADAS calibration, module programming, and key security work for every Ford F-350 built on this platform. Same-day mobile service across the Dallas/Fort Worth metroplex; mail-in accepted nationwide.
- Platform P473 (SuperDuty Gen2, 2008-2016)
- CAN Architecture HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
- Security Ford PATS Gen 4-5 (Texas Instruments DST-80 80-bit transponder); SecuriLock passive anti-theft; no OBD PIN extraction; AKL requires FDRS PIN or dealer authorization
The ADAS, module, and security rows below are consolidated across the full 2008-2010 generation. A year badge marks rows that apply only to part of the span; rows without a badge apply to every year. Year-specific differences are summarized under “What changes across 2008-2010”.
OVERVIEW
Expert ADAS calibration, module programming, and diagnostic recovery for the 2008 Ford F350. On this vehicle we cover documented systems include Rear View Camera, Blind Spot Monitoring, and Forward Collision Warning / AEB, this P473 (SuperDuty Gen2, 2008-2016) platform vehicle, PATS / Smart Key immobilizer support. Mobile across the DFW Metroplex, mail-in nationwide for module-bench work.
Platform
P473 (SuperDuty Gen2, 2008-2016)
Production
1999-present
Trim Levels
-
Drivetrain
RWD / 4WD
Engine
-
CAN Speed
HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
Feature availability 2
Platform: P473 (SuperDuty Gen2, 2008-2016)
ConfirmedVerify platform code matches when cross-referencing part numbers across model years.
Tool access for this exact year
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
Factory scan, coding, and calibration access
Ford IDS / Ford FDRS
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
OEM subscription required
Make-level OEM tool map plus exact-year gateway and ADAS fields.
Ford-family configuration and service functions
FORScan
Useful for supported configuration and diagnostics; factory programming still moves to OEM software when required.
FORScan Ford, Mazda, Lincoln, and Mercury support documentation.
ADAS scan, setup, and verification
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Tool subscription required
Service-level scanner-vendor source packet plus exact-year ADAS records.
Bench cloning and chip-level recovery
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Bench programmer source packet plus exact-year module/security records.
Know this platform
This platform uses HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14 with ISO 15765-4 CAN (500 kbps).
- CAN
- HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
- OBD
- ISO 15765-4 CAN (500 kbps)
Generation service summary for Ford F-350 Super Duty 2nd Gen (2008-2010)
Generation coverage
This page consolidates Ford F-350 service data for 2008-2010 across 3 model years; 3 years have merged CCT data.
Choose a yearADAS coverage
Merged ADAS coverage includes 3 system records, including Rear View Camera, Blind Spot Monitoring, and Forward Collision Warning / AEB. Year-marked systems apply only to the shown range.
View ADAS dataCalibration triggers
This generation has 2 merged calibration trigger records. Trigger applicability can vary by year - verify by VIN before setup.
View triggersProgrammable modules
The merged generation page indexes 26 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, IPC coverage. Part numbers are confirmed for the exact year/VIN.
View modulesGateway and security
Gateway, immobilizer, and key-security coverage includes 3 merged records. Security procedures vary by year - verify by VIN.
View securityCore Auto Logic capability
Core Auto Logic supports generation-level diagnostics, ADAS calibration, module programming, security-access planning, and mail-in bench work for the Ford F-350 2008-2010 span, with exact-year validation before service.
Get a quoteDo I need calibration?
PCM Replacement 1
2008-2010
Yes
IDS as-built data download + PATS parameter reset required.
ABS Module Replacement 1
2008-2010
Yes
IDS ABS bleed procedure + WSS relearn.
Year-by-year details
| Year | VIN split | Trim notes |
|---|---|---|
| 2008 | ||
| 2009 | VIN pos 4-8 identifies body/engine/restraint. Ford uses World Manufacturer Identifier 1FA (passenger), 1FT (truck). Position 7 = engine code. Position 10 = model year code. | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. |
| 2010 | VIN pos 4-8 identifies body/engine/restraint. Ford uses World Manufacturer Identifier 1FA (passenger), 1FT (truck). Position 7 = engine code. Position 10 = model year code. | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. |
What changes across 2008-2010
Differences versus the generation reference year. Years not listed here match the shared platform data on this page.
2009
- VIN split: VIN pos 4-8 identifies body/engine/restraint. Ford uses World Manufacturer Identifier 1FA (passenger), 1FT (truck). Position 7 = engine...
- Trims: Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration...
2010
- VIN split: VIN pos 4-8 identifies body/engine/restraint. Ford uses World Manufacturer Identifier 1FA (passenger), 1FT (truck). Position 7 = engine...
- Trims: Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration...
3 ADAS systems documented across 2008-2010. Rows that apply to only part of the generation carry a year badge.
Filter by year
ADAS CALIBRATION MATRIX
ADAS systems on this vehicle
No full ADAS suite - pre-Co-Pilot360 generation. Optional rear camera; Blind Spot Information System optional on upper trims; no standard Automatic Emergency Braking.
Scroll for part numbers and Details
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Rear View Camera | Rear Camera | Camera | None | YES | - | |
| Blind Spot Monitoring | Radar | ADAS | Static | Conditional | - | |
| Forward Collision Warning / AEB | Camera | ADAS | Static | Conditional | - |
ADAS SYSTEM
YES Supported
Identification
- System type
- Module category
- Sensor location
Part Numbers
- OEM
- Alternative
Calibration & Triggers
- Calibration type
- Programming approach
- Requires PMI
- Trigger events
Technical Notes
- Chip / MCU
- Service notes
Need this calibrated?
Get a quote for ADAS calibration WHEN IS CALIBRATION REQUIRED?
Triggers for ADAS recalibration
PCM Replacement
IDS as-built data download + PATS parameter reset required.
ABS Module Replacement
IDS ABS bleed procedure + WSS relearn.
Modules we program on this generation
26 documented Ford F-350 modules across 2008-2010. Open a group for part numbers, programming protocol, security notes, and clone support.
SRS MODULES
SRS Modules
Airbag Control Module (ACM) Verify by VIN 2008
_years covers only 2008 for this generation
Used/donor module guide
Compatible donor years: 2008
Always match the full part number before buying a used module.
- PROTOCOL
- OBD
- CLONE
- true
- NOTES
- After any airbag deployment, the ACM stores crash data (hard codes). The module must be reset or replaced before the SRS system will function. Our equipment supports hard code clearing on most makes and models without dealer involvement.
Driver Airbag Module Verify by VIN 2008
_years covers only 2008 for this generation
Used/donor module guide
Compatible donor years: 2008
Always match the full part number before buying a used module.
- PROTOCOL
- None
- CLONE
- false
- NOTES
- Steering wheel airbag must be replaced after deployment. Clock spring (spiral cable) must also be inspected and replaced if damaged. Confirm correct resistance before reconnecting.
Passenger Airbag Module Verify by VIN 2008
_years covers only 2008 for this generation
Used/donor module guide
Compatible donor years: 2008
Always match the full part number before buying a used module.
- PROTOCOL
- None
- CLONE
- false
- NOTES
- Dashboard passenger airbag must be replaced after deployment. Dashboard assembly typically requires removal for access. Confirm OEM part number matches vehicle build date.
Restraint Control Module (RCM) Verify by VIN 2009-2010 DC3T14B321DC
_years covers only 2009-2010 for this generation
Used/donor module guide
Compatible donor years: 2009, 2010
Always match the full part number before buying a used module.
- PART
- DC3T14B321DC
- LOCATION
- Under center console
- MFG
- Autoliv
- NOTES
- Requires FDRS or J2534 for RCM configuration. As-built data recommended for programming. DTC B1231 common post-crash. Module must be configured to VIN.
Restraint Control Module (RCM) Verify by VIN 2009-2010 BC3426042D95BA
_years covers only 2009-2010 for this generation
Used/donor module guide
Compatible donor years: 2009, 2010
Always match the full part number before buying a used module.
- PART
- BC3426042D95BA
- LOCATION
- Under center console
- MFG
- Autoliv
- NOTES
- Requires FDRS or J2534 for RCM configuration. As-built data recommended for programming. DTC B1231 common post-crash. Module must be configured to VIN.
Restraint Control Module (RCM) Verify by VIN 2009-2010 BC3426042D94BA
_years covers only 2009-2010 for this generation
Used/donor module guide
Compatible donor years: 2009, 2010
Always match the full part number before buying a used module.
- PART
- BC3426042D94BA
- LOCATION
- Under center console
- MFG
- Autoliv
- NOTES
- Requires FDRS or J2534 for RCM configuration. As-built data recommended for programming. DTC B1231 common post-crash. Module must be configured to VIN.
ECU MODULES
ECU Modules
Powertrain Control Module (PCM) - 5.4L 3V SOHC Modular V8 x2
8C3A-12A650-ADA Verify by VIN 2008 J2534
_years covers only 2008 for this generation
Used/donor module guide
Compatible donor years: 2008
Always match the full part number before buying a used module.
- PART
- 8C3A-12A650-ADA
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- No
- NOTES
- Same P356 Super Duty platform as F-250; eBay lists 8C3A-12A650-YF on 2008 F-350 SD 5.4L; ADA/AFF/ZG/YG variants all documented for 2008 SD 5.4L. | Sources: https://www.ebay.com/p/1828631703 | Alt PN: 8C3Z-12A650-ADG
9C3A-12A650-DFB Verify by VIN 2009 J2534
_years covers only 2009 for this generation
Used/donor module guide
Compatible donor years: 2009
Always match the full part number before buying a used module.
- PART
- 9C3A-12A650-DFB
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- No
- NOTES
- Same module family as F-250 2009 5.4L; importapart title explicitly says F-250/F-350 5.4L; 9C3A distinguishes Super Duty from F-150. | Sources: https://www.importapart.com/product/09-ford-super-duty-f250-f350-5-4l-ecu-ecm-pcm-engine-computer-9c3a-12a650-dfb-25/ | Alt PN: 9C3A-12A650-CYA
Engine Control Module (ECM) - 6.4L Power Stroke Diesel V8 Twin-Turbo x2
8C3A-12A650-CJK Verify by VIN 2008 J2534
_years covers only 2008 for this generation
Used/donor module guide
Compatible donor years: 2008
Always match the full part number before buying a used module.
- PART
- 8C3A-12A650-CJK
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- No
- NOTES
- DC Diesel TX lists 8C3A-12A650-CJK for 08-10 F-250/F-350 6.4L; same module as F-250 2008 diesel per shared P356 Super Duty platform. | Sources: https://dcdieseltx.com/products/08-10-ford-f250-f350-6-4-6-4l-pcm-ecm-ecu-engine-computer-8c3a-12a650-cjk-a0185-1 | Alt PN: 8C3Z-12A650-EBGRM
8C3A-12A650-EBF Verify by VIN 2009 J2534
_years covers only 2009 for this generation
Used/donor module guide
Compatible donor years: 2009
Always match the full part number before buying a used module.
- PART
- 8C3A-12A650-EBF
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- No
- NOTES
- Same 8C3A-12A650-EBF/ECF family for 2009 F-350 6.4L diesel as F-250; hardware 8C3A-12B684-BA. | Sources: https://www.fs1inc.com/8c3a-12a650-ecf-2009-ford-truck-6-4l-engine-computer-pcm-ecm-ecu-programmed-updated-8c3a-12b684-ba.html | Alt PN: 8C3A-12A650-ECF
Engine Control Module (ECM) - 6.8L 3V SOHC V10 Modular x2
8C3A-12A650-BFD Verify by VIN 2008 J2534
_years covers only 2008 for this generation
Used/donor module guide
Compatible donor years: 2008
Always match the full part number before buying a used module.
- PART
- 8C3A-12A650-BFD
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- No
- NOTES
- F-350 shares P356 Super Duty platform with F-250; same 8C3A-12A650-BFD/CRE family applies; Tasca lists 8C3Z-12A650-CVERM as service replacement. | Sources: https://www.fs1inc.com/oem-engine-computer-programmed-flashed-2008-ford-truck-8c3a-12a650-bfd-fcn3.html | Alt PN: 8C3Z-12A650-CVERM
9C3A-12A650-ANE Verify by VIN 2009 J2534
_years covers only 2009 for this generation
Used/donor module guide
Compatible donor years: 2009
Always match the full part number before buying a used module.
- PART
- 9C3A-12A650-ANE
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- No
- NOTES
- Same 9C3A-12A650 family for 2009 F-350 6.8L V10 as F-250; ecmrebuilders confirms 2009 F-250/F-350/F-450/F-550 6.8L uses VK2-C3912 hardware. | Sources: https://www.fs1inc.com/9c3a-12a650-ane-2009-ford-truck-f-series-engine-computer-pcm-ecm-ecu-programmed-plug-play-vk2-c3910.html | Alt PN: 9C3A-12A650-AKD
PCM - 5.4L Triton V8 / 6.2L V8 / 6.7L Power Stroke Diesel Verify by VIN 2010 x1
_years covers only 2010 for this generation
Used/donor module guide
Compatible donor years: 2010
Always match the full part number before buying a used module.
- NOTES
- Ford Super Duty PCM. IDS as-built + PATS parameter reset.
BCM MODULES
BCM Modules
BCM (Body Control Module) Verify by VIN
coding and programming fields are absent or ambiguous
Used/donor module guide
Compatible donor years: 2008, 2009, 2010
Always match the full part number before buying a used module.
- NOTES
- Ford BCM. IDS/FDRS programming after replacement. PATS relearn required if equipped.
TCU / TCM TRANSMISSION MODULES
TCU / TCM Transmission Modules
TCU - 5R110W 5-Speed Auto Verify by VIN 2008-2009 8C3A-7H105
_years covers only 2008-2009 for this generation
Used/donor module guide
Compatible donor years: 2008, 2009
Donor must match part family 8C3A-7H105 - requires cloning
Always match the full part number before buying a used module.
- PART
- 8C3A-7H105
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- Yes
- CHIP/MCU
- Continental Temic
- NOTES
- Requires Ford IDS/FDRS programming, transmission relearn via drive cycle, Mercon SP ATF, VIN coding mandatory
TCU - 6R140 6-Speed Auto Verify by VIN 2008-2009 9C3A-7H105
_years covers only 2008-2009 for this generation
Used/donor module guide
Compatible donor years: 2008, 2009
Donor must match part family 9C3A-7H105 - requires cloning
Always match the full part number before buying a used module.
- PART
- 9C3A-7H105
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- Yes
- CHIP/MCU
- Continental Temic
- NOTES
- Requires Ford IDS programming, adaptive learning drive cycle, Mercon SP ATF, engine/transmission pairing critical
TCU - 6R140 6-Speed Auto Verify by VIN 2010 BC3Z-7Z369
_years covers only 2010 for this generation
Used/donor module guide
Compatible donor years: 2010
Donor must match part family BC3Z-7Z369 - requires cloning
Always match the full part number before buying a used module.
- PART
- BC3Z-7Z369
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- Yes
- CHIP/MCU
- Continental TC1797
- NOTES
- Requires Ford IDS programming, adaptive relearn cycle, Mercon LV ATF, PATS synchronization required
TCU - 5R110W 5-Speed Auto Verify by VIN 2010 BC3Z-7Z369
_years covers only 2010 for this generation
Used/donor module guide
Compatible donor years: 2010
Always match the full part number before buying a used module.
- PART
- BC3Z-7Z369
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- No
- CHIP/MCU
- Bosch TC1797
- NOTES
- Ford IDS required, transmission relearn procedure mandatory, Mercon SP ATF, PCM communication critical
ABS / BRAKE MODULES
ABS / Brake Modules
ABS/ESC Control Module (ABSCM) Verify by VIN
coding and programming fields are absent or ambiguous
Used/donor module guide
Compatible donor years: 2008, 2009, 2010
Always match the full part number before buying a used module.
- NOTES
- Ford ABS module. IDS bleeding procedure after replacement. Wheel speed sensor relearn.
Wheel Speed Sensor - Front (each) Verify by VIN
coding and programming fields are absent or ambiguous
Used/donor module guide
Compatible donor years: 2008, 2009, 2010
Always match the full part number before buying a used module.
- NOTES
- Hall-effect sensor. Replace if DTC C1145/C1155 set.
Wheel Speed Sensor - Rear (each) Verify by VIN
coding and programming fields are absent or ambiguous
Used/donor module guide
Compatible donor years: 2008, 2009, 2010
Always match the full part number before buying a used module.
- NOTES
- Hall-effect sensor.
OTHER MODULES (IPC, SAS)
Other Modules (IPC, SAS)
Instrument Panel Cluster (IPC) Verify by VIN 2010 AC3T-10849-AB
_years covers only 2010 for this generation
Used/donor module guide
Compatible donor years: 2010
Donor must match part family AC3T-10849-AB - requires cloning
Always match the full part number before buying a used module.
- PART
- AC3T-10849-AB
- CLONE
- Yes
- NOTES
- IPC/cluster (P356 Super Duty F-350 2010 final year)
Steering Angle Sensor (SAS) Verify by VIN
coding and programming fields are absent or ambiguous
Used/donor module guide
Compatible donor years: 2008, 2009, 2010
Always match the full part number before buying a used module.
- CODING
- Yes
- NOTES
- INTEGRATED (clock spring / steering column module
Steering Angle Sensor (SAS) Verify by VIN
coding and programming fields are absent or ambiguous
Used/donor module guide
Compatible donor years: 2008, 2009, 2010
Always match the full part number before buying a used module.
- CODING
- Yes
- NOTES
- cross-year extension)
CONNECTIVITY & ACCESSORIES
Connectivity & Accessories
Instrument cluster, trailer brake, upfitter, and body options - if equipped Verify by VIN VERIFY EXACT F350 IPC
coding and programming fields are absent or ambiguous
Used/donor module guide
Compatible donor years: 2008, 2009, 2010
Always match the full part number before buying a used module.
- PART
- VERIFY EXACT F350 IPC
- NOTES
- Verify cluster, trailer brake, upfitter switch, parking aid, and body-option modules by VIN. Follow Ford service information for PMI, as-built restore, initialization, and DTC checks.
3 gateway, immobilizer, and security items documented across 2008-2010.
KEY SECURITY & IMMOBILIZER
Key Security & Immobilizer
- System PATS / Smart Key
- Add Key Yes
- All Keys Lost Yes
Ford PATS Gen 4-5 (Texas Instruments DST-80 80-bit transponder); SecuriLock passive anti-theft; no OBD PIN extraction; AKL requires FDRS PIN or dealer authorization
IMMOBILIZER MODULES
Immobilizer Modules
PATS (Passive Anti-Theft System) Verify by VIN
coding and programming fields are absent or ambiguous
Used/donor module guide
Compatible donor years: 2008, 2009, 2010
Always match the full part number before buying a used module.
- NOTES
- Ford PATS Gen 4-5. PCM-integrated. IDS parameter reset for AKL. No OBD PIN extraction.
KEY & FOB TYPES
Key & Fob Types
PATS Transponder Key (80-bit TI chip) Bench clone required
notes indicates cloning or bench work
Used/donor module guide
Compatible donor years: 2008, 2009, 2010
Always match the full part number before buying a used module.
- NOTES
- Cut and program. IDS PATS relearn or aftermarket tool (Autel MaxiIM). Max 8 keys.
Remote Key Fob (RKE) Verify by VIN
coding and programming fields are absent or ambiguous
Used/donor module guide
Compatible donor years: 2008, 2009, 2010
Always match the full part number before buying a used module.
- NOTES
- 315MHz Ford RKE. Program via IDS or 8x on/off cycle for simple fobs.
Replacement Notes
PATS / Smart Key system. FDRS required for key programming and module replacement. No obd pin extraction; akl supported.
ARCHITECTURE & CONNECTIVITY
Architecture & Connectivity
- Body Construction
- Body-on-frame; high-strength steel frame; F-350 SRW or DRW; confirm SRW/DRW before any ABS module order
- OBD Protocol
- ISO 15765-4 CAN (500 kbps)
- CAN Architecture
- HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
- Infotainment
- Ford SYNC 1 (4.2" display); voice commands; Bluetooth; USB/Aux
- OTA Capable
- No
- ECU Unlock Supported
- No
- Custom Programming
- Yes
WHAT WE RESOLVE
Super Duty 2nd Gen (2008-2010) common module and ADAS issues
- ADAS calibration drift Watch for calibration needs after windshield, bumper, suspension, camera, or radar work. Documented systems include Rear View Camera, Blind Spot Monitoring, and Forward Collision Warning / AEB. Year-marked systems apply only to the shown range.
- SRS crash-data and warning light SRS service can involve Airbag Control Module (ACM) (2008), Driver Airbag Module (2008), and Passenger Airbag Module (2008). Part numbers and crash-data workflow are confirmed for the exact year/VIN.
- Replacement module setup ECU/PCM replacement programming, BCM configuration, TCU/TCM cloning, ABS/EBCM setup are represented in the merged generation data. Rows with year ranges do not apply to every model year; verify by VIN.
- Gateway, key, and immobilizer access Gateway, key, and immobilizer procedures are represented by 3 merged security records. Access and all-keys-lost support varies by year - verify by VIN.
FREQUENTLY ASKED QUESTIONS
FAQ
Can you program Ford F-350 (2008-2010) modules?
Yes. Core Auto Logic supports generation-scoped module programming for the Ford F-350 (2008-2010). The merged generation data includes ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS coverage. Rows marked with a year range apply only to that part of the span; unmarked rows are present across the merged generation data.
Which modules are documented for Ford F-350 (2008-2010)?
The Ford F-350 (2008-2010) generation currently shows 21 core module records across ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS groups. SRS examples include Airbag Control Module (ACM) (2008), Driver Airbag Module (2008), and Passenger Airbag Module (2008). Part numbers and module variants must be confirmed for your exact year/VIN. Reference part number: DC3T14B321DC (2009-2010) - confirm for your exact year/VIN.
Does Ford F-350 (2008-2010) need ADAS calibration after glass or collision work?
The merged generation data documents 3 ADAS systems, including Rear View Camera, Blind Spot Monitoring, and Forward Collision Warning / AEB. Calibration triggers include PCM Replacement and ABS Module Replacement. Procedure type is VIN-specific scan-tool procedure; verify exact requirements by VIN before setup.
Can you reset the airbag module on Ford F-350 (2008-2010)?
Yes. The generation data includes 6 SRS records, including Airbag Control Module (ACM) (2008), Driver Airbag Module (2008), and Passenger Airbag Module (2008). Bench reset, cloning, and replacement setup are handled after part-number review. Any SRS part number shown for this generation is planning data only - confirm for your exact year/VIN. Reference part number: DC3T14B321DC (2009-2010) - confirm for your exact year/VIN.
Do all Ford F-350 (2008-2010) years use the same parts?
No assumption should be made across the full span. The generation page merges rows across 2008-2010; any row that does not span all data-bearing years is printed with its year range or treated as varies by year - verify by VIN. Part numbers always require exact year/VIN confirmation before ordering, cloning, or programming.
Can you program keys or immobilizer systems for Ford F-350 (2008-2010)?
Yes, where the VIN and security workflow support it. The generation data includes 3 gateway, immobilizer, or key-security records. Key records are present in the merged generation data. Security access, all-keys-lost eligibility, and add-key workflows vary by year - verify by VIN.
How long does service take for Ford F-350 (2008-2010)?
Most programming, cloning, SRS, and calibration jobs are quoted after VIN, DTC, part number, and repair-scope review. Labor time varies by year - verify by VIN before scheduling. Mail-in module work typically depends on module condition, donor data, and shipping window.
Is Ford F-350 (2008-2010) service mobile or mail-in?
Both paths are available depending on the job. Mobile service covers DFW on-vehicle diagnostics, ADAS setup, key programming, and post-repair coding. Mail-in service covers ECU, BCM, SRS, TCU, ABS, and other bench module work nationwide. We confirm the correct path for your exact year/VIN before scheduling.
More F-350 generations
Super Duty 2nd Gen 2008-2010 You are here Super Duty 3rd Gen 2011-2016 Super Duty 4th Gen 2017-2022 Super Duty 5th Gen 2023-2026