Choose a make, model and year, or start with a VIN.
ADAS calibration, module programming, and security relearns
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Choose a service to start your quote.
This 2019 Volkswagen Atlas page documents 6 ADAS systems, including Front Assist - AEB + Forward Collision Warning, Side Assist - Blind Spot Monitor, Rear Traffic Alert - Cross Traffic, and Lane Assist - Lane Keep + Lane Departure Warning.
View ADAS dataDocumented calibration triggers include Windshield Replacement, Front Bumper Repair or Replacement, Rear Bumper Repair or Replacement, and Any Collision. Use the ADAS tab for the full trigger list.
View triggersThis page indexes 50 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and IPC coverage.
View modulesThis page includes 2 gateway, immobilizer, or key-security records for this 2019 Volkswagen Atlas.
View securityCore Auto Logic supports exact-year diagnostics, ADAS calibration, module programming, and security-access planning for the 2019 Volkswagen Atlas using the documented systems and module data on this page.
Choose a sectionVIN and build details determine exact service eligibility. A missing record does not mean we cannot help; ask about your vehicle.
VIN pos 4-6 identifies model. VW WMI: 3VW, WVW, 1VW. Position 4-6 = model code. Position 10 = model year code.
ADAS Calibration - Yes; SRS / Airbag - Yes; BCM / Module Coding - Yes
IQ.Drive - Front Assist, Side Assist, Lane Assist, Adaptive Cruise Control (SE and above)
VIN pos 4-6 identifies model. VW WMI: 3VW, WVW, 1VW. Position 4-6 = model code. Position 10 = model year code.
MIB2 (Discover Media standard; Discover Pro optional SEL)
CAN: HS-CAN (Powertrain), Comfort CAN, Extended CAN, LIN (sensors/switches), MOST (audio on SEL)
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
VW ODIS-S / ODIS-E
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Choose a section to view data
Documented module coverage for the 2019 Volkswagen Atlas. Counts reflect modules our techs have programmed or calibrated on this exact platform.
Forward camera, radar, surround-view and lane-keep recalibration after windshield, suspension or fascia work.
Open ADAS tabPowertrain reprogramming, calibration updates, replacement ECU configuration and security access.
Open Modules tabBody control module, gateway and accessory programming. Includes feature-bit reconfiguration.
Open Modules tabTransmission control module reprogramming, adaptive learning reset and replacement TCM clone.
Open Modules tabCrash-data clear, hard-code reset and replacement airbag module configuration.
Open Modules tabABS / EBCM bleed support, replacement module coding and yaw-rate sensor calibration.
Open Modules tabInstrument cluster cloning, steering angle sensor calibration and other supporting modules.
Open Modules tabInfotainment radio, surround view, remote start, trailer brake controller and other equipped systems.
Open Modules tabService events that require ADAS recalibration on this vehicle. Tap to see what triggers what.
Open ADAS tabNeed something not listed? Most undocumented modules can still be programmed.
Get a QuoteODIS static calibration for radar and camera systems
Crash clear or replacement with ODIS coding
Immo5 component protection - online ODIS required
Clone supported; Immo5 clearance required
Common Volkswagen Atlas issues we resolve on this platform: Front Assist - AEB + Forward Collision Warning, Side Assist - Blind Spot Monitor, Rear Traffic Alert - Cross Traffic, and Lane Assist - Lane Keep + Lane Departure Warning recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - CA1 (MQB) platform uses HS-CAN (Powertrain), Comfort CAN, Extended CAN, LIN (sensors/switches), MOST (audio on SEL).
IQ.Drive - Front Assist, Side Assist, Lane Assist, Adaptive Cruise Control (SE and above)
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Front Assist - AEB + Forward Collision Warning | Front Radar + Camera | Fused | Static | YES | 5QA-907-561-A | |
| Side Assist - Blind Spot Monitor | Side Radar | Radar | Static + Dynamic | YES | 5Q0-907-107-D (L), 5Q0-907-107-E (R) | |
| Rear Traffic Alert - Cross Traffic | Side Radar | Radar | Static | YES | 5Q0-907-107-D (L), 5Q0-907-107-E (R) | |
| Lane Assist - Lane Keep + Lane Departure Warning | Forward Camera | Camera | Static | YES | 5Q0-980-653-B | |
| Adaptive Cruise Control (ACC) | Front Radar | Radar | Static | YES | 5QA-907-561-A | |
| Park Distance Control (PDC) | Ultrasonic | Ultrasonic | None | YES | VARIOUS - 4 FRONT |
ADAS SYSTEM
Need this calibrated?
Get a quote for ADAS calibrationODIS static camera calibration required after any windshield replacement. Target board placement per VW workshop manual. Windshield must be OEM or approved equivalent with correct acoustic film and proper primer application. Allow full adhesive cure time before calibration attempt.
ODIS static radar alignment required after any front bumper work. Vehicle at curb weight on level surface. Radar target board at specified distance and angle per workshop manual. Inspect radar mounting bracket - deformation even 1-2mm will cause calibration failure.
ODIS calibration for both rear radar modules after bumper repair. PDC sensor count re-coding if sensors were removed. Confirm no foam insert is obstructing radar face behind repaired fascia.
Full ODIS module scan mandatory. SRS crash data stored in J234 - clear or replace before vehicle delivery. Do not clear codes without physically confirming sensor and bracket integrity. All ADAS modules in the collision zone must be recalibrated.
Online module coding required via our ODIS diagnostic system for all replacement modules. Immo5 component protection clearance required for J623 (ECM) and J519 (BCM). SVM channel required for J533 gateway flash. Coordinate VW factory portal authorization before beginning module swaps.
Radar module replacement requires alignment/calibration using ODIS-S.
Blind spot monitoring sensor replacement requires calibration using ODIS-S.
If BSD sensor is mirror-integrated, recalibration required. Verify sensor location; use ODIS-S if applicable.
No matching records. Try a shorter part number or clear the filters. You can still request help if your module is not listed.
ADAS calibration pricing for a 2019 Volkswagen Atlas depends on which of its 6 documented systems need work after a repair. This vehicle is documented with Front Assist - AEB + Forward Collision Warning, Side Assist - Blind Spot Monitor, Rear Traffic Alert - Cross Traffic, Lane Assist - Lane Keep + Lane Departure Warning, and Adaptive Cruise Control (ACC). We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.
Yes. The 2019 Volkswagen Atlas uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: 5Q0 959 655 AA. Mobile diagnosis and programming are available in DFW, and mail-in module service is available nationwide. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.
After windshield replacement on a 2019 Volkswagen Atlas, Front Assist - AEB + Forward Collision Warning and Lane Assist - Lane Keep + Lane Departure Warning rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in module service is available nationwide for eligible module work.
Most 2019 Volkswagen Atlas onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 15 programmable modules documented in our database (3 ECU, 2 BCM, 2 TCU, 1 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module service is available nationwide.
We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, post-repair recoding, and supported module work). Mail-in module service is available nationwide. Quote the work and we will confirm the active service path for the 2019 Volkswagen Atlas. Do not ship a module unless support confirms next steps.
Every programming, cloning, and calibration job on the 2019 Volkswagen Atlas is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
We program, clone, repair, or replace the full programmable-module stack on a 2019 Volkswagen Atlas. For this vehicle our database documents:
Send the VIN and the operations performed and we will confirm support and pricing.
Additional OEM-sourced part numbers for the 2019 Volkswagen Atlas covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.
Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.
Send your VIN and we'll confirm exact module support and pricing in the quote response.
1-year unlimited warranty on every flash and calibration.
Matching catalog references
These pages list a matching part reference in the same module category. This does not confirm interchangeability. Verify the complete part number, suffix, VIN and build before selecting a replacement.
Factory diagnostic software is available. We confirm the appropriate software and supported procedure for your vehicle.
Get onsite help in Dallas-Fort Worth. Ask about same-day availability or a one-time remote session for eligible work.