3,200+ Vehicles Supported

1-Year Unlimited Guarantee

DFW Mobile Service

DFW Serving Dallas / Fort Worth

1st Gen - 2018-2026 generation coverage

2018-2026 Volkswagen Atlas service guide ADAS Calibration & Module Programming

Choose a repair service below or find your module by part number. Onsite help is available in Dallas-Fort Worth, with mail-in module service nationwide.

What do you need fixed?

Choose a service to start your quote.

Fix my ECUEngine computer Fix my TCMTransmission computer Repair my BCMBody electronics Code my vehicleCustom coding Repair a moduleElectronic module repair

Find your module

191 documented Volkswagen Atlas module records across the 2018-2026 generation. Search by module name or part number, then open a result for requirements and repair options.

ECU / Engine

Engine Control Module - 2.0L TSI (J623) 2 records

06K-907-105 Verify by VIN 2018 OBD Programming Port

Documented for 2018 within this generation. Confirm the exact vehicle by VIN.

Coverage and replacement notes

Documented years: 2018

Donor must match part family 06K-907-105; VIN-locked - requires cloning

Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.

Part number: 06K-907-105
Protocol / method: OBD Programming Port
Coding required: Yes
Cloning supported: Yes
Chip / MCU: Bosch MED17.5
Notes: ODIS-S with Programming Port VAS 6154A equivalent. SVM (Software Version Management) channel required for flash. Immo5 - ECM tied to immobilizer. Component protection must be cleared via VW online portal. Battery at full charge before programming.

Request help with this module

06K-907-105 Verify by VIN 2019 OBD Programming Port

Documented for 2019 within this generation. Confirm the exact vehicle by VIN.

Coverage and replacement notes

Documented years: 2019

Donor must match part family 06K-907-105 - requires cloning

Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.

Part number: 06K-907-105
Protocol / method: OBD Programming Port
Coding required: Yes
Cloning supported: Yes
Chip / MCU: Bosch MED17.5
Notes: Online module coding required via our ODIS diagnostic system. ODIS-S Programming Port VAS 6154A-equivalent interface. SVM channel required for flash. Immo5 component protection clearance mandatory via VW factory portal. Battery must be at full charge before programming - use external charger.

Request help with this module

Engine Control Module - 3.6L VR6 (J623) 2 records

04E-907-309 Verify by VIN 2018 OBD Programming Port

Documented for 2018 within this generation. Confirm the exact vehicle by VIN.

Coverage and replacement notes

Documented years: 2018

Donor must match part family 04E-907-309 - requires cloning

Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.

Part number: 04E-907-309
Protocol / method: OBD Programming Port
Coding required: Yes
Cloning supported: Yes
Chip / MCU: Bosch MED17.1
Notes: Same ODIS-S SVM procedure as 2.0L TSI. Immo5 component protection clearance required.

Request help with this module

04E-907-309 Verify by VIN 2019 OBD Programming Port

Documented for 2019 within this generation. Confirm the exact vehicle by VIN.

Coverage and replacement notes

Documented years: 2019

Donor must match part family 04E-907-309 - requires cloning

Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.

Part number: 04E-907-309
Protocol / method: OBD Programming Port
Coding required: Yes
Cloning supported: Yes
Chip / MCU: Bosch MED17.1
Notes: Same ODIS-S SVM procedure as 2.0L TSI. Immo5 component protection clearance required via VW factory portal.

Request help with this module

Transmission Control Module - 8-speed Aisin (J217) Verify by VIN 2018 1 record

Documented for 2018 within this generation. Confirm the exact vehicle by VIN.

Coverage and replacement notes

Documented years: 2018

Donor must match part family 0D9-927-158 - requires cloning

Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.

Part number: 0D9-927-158
Protocol / method: OBD Programming Port
Coding required: Yes
Cloning supported: Yes
Chip / MCU: Bosch TCU
Notes: ODIS-S TCM adaptation required after replacement. Transmission basic settings (oil temperature adaptation) must be performed. 4Motion AWD variant has additional Haldex module coding.

Request help with this module

Transmission Control Module - 8-speed Aisin/ZF (J217) Verify by VIN 2019 1 record

Documented for 2019 within this generation. Confirm the exact vehicle by VIN.

Coverage and replacement notes

Documented years: 2019

Donor must match part family 0D9-927-158 - requires cloning

Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.

Part number: 0D9-927-158
Protocol / method: OBD Programming Port
Coding required: Yes
Cloning supported: Yes
Chip / MCU: Bosch TCU Gen3
Notes: ODIS-S TCM basic settings and transmission adaptation required after replacement. Oil temperature adaptation and shift quality learn-in procedure. 4Motion AWD variant requires additional Haldex coupling module coding via ODIS.

Request help with this module

ECM - 2.0L TSI (J623) 4 records

06K-907-105 Verify by VIN 2020 OBD Programming Port

Documented for 2020 within this generation. Confirm the exact vehicle by VIN.

Coverage and replacement notes

Documented years: 2020

Donor must match part family 06K-907-105 - requires cloning

Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.

Part number: 06K-907-105
Protocol / method: OBD Programming Port
Coding required: Yes
Cloning supported: Yes
Chip / MCU: Bosch MED17.5
Notes: Online module coding required via our ODIS diagnostic system. SVM channel + Immo5 component protection clearance. Battery at full charge. Engine code via VIN before ordering.

Request help with this module

06K-907-105 Verify by VIN 2021 OBD Programming Port

Documented for 2021 within this generation. Confirm the exact vehicle by VIN.

Coverage and replacement notes

Documented years: 2021

Donor must match part family 06K-907-105 - requires cloning

Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.

Part number: 06K-907-105
Protocol / method: OBD Programming Port
Coding required: Yes
Cloning supported: Yes
Chip / MCU: Bosch MED17.5
Notes: ODIS-S SVM. Immo5 component protection.

Request help with this module

06K-907-105 Verify by VIN 2022 OBD Programming Port

Documented for 2022 within this generation. Confirm the exact vehicle by VIN.

Coverage and replacement notes

Documented years: 2022

Donor must match part family 06K-907-105 - requires cloning

Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.

Part number: 06K-907-105
Protocol / method: OBD Programming Port
Coding required: Yes
Cloning supported: Yes
Chip / MCU: Bosch MED17.5.21
Notes: Online module coding required via our ODIS diagnostic system. SVM + Immo5 component protection clearance.

Request help with this module

06K-907-105 Verify by VIN 2023 OBD Programming Port

Documented for 2023 within this generation. Confirm the exact vehicle by VIN.

Coverage and replacement notes

Documented years: 2023

Donor must match part family 06K-907-105 - requires cloning

Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.

Part number: 06K-907-105
Protocol / method: OBD Programming Port
Coding required: Yes
Cloning supported: Yes
Chip / MCU: Bosch MED17.5.21
Notes: Online module coding required via our ODIS diagnostic system. SVM + Immo5 clearance. Final CA1 2.0T calibration.

Request help with this module

ECM - 3.6L VR6 (J623) 4 records

04E-907-309 Verify by VIN 2020 OBD Programming Port

Documented for 2020 within this generation. Confirm the exact vehicle by VIN.

Coverage and replacement notes

Documented years: 2020

Donor must match part family 04E-907-309 - requires cloning

Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.

Part number: 04E-907-309
Protocol / method: OBD Programming Port
Coding required: Yes
Cloning supported: Yes
Chip / MCU: Bosch MED17.1
Notes: Same ODIS SVM procedure. VR6 discontinued after 2023 - 2020 is mid-life CA1.

Request help with this module

04E-907-309 Verify by VIN 2021 OBD Programming Port

Documented for 2021 within this generation. Confirm the exact vehicle by VIN.

Coverage and replacement notes

Documented years: 2021

Donor must match part family 04E-907-309 - requires cloning

Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.

Part number: 04E-907-309
Protocol / method: OBD Programming Port
Coding required: Yes
Cloning supported: Yes
Chip / MCU: Bosch MED17.1
Notes: ODIS SVM.

Request help with this module

04E-907-309 Verify by VIN 2022 OBD Programming Port

Documented for 2022 within this generation. Confirm the exact vehicle by VIN.

Coverage and replacement notes

Documented years: 2022

Donor must match part family 04E-907-309 - requires cloning

Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.

Part number: 04E-907-309
Protocol / method: OBD Programming Port
Coding required: Yes
Cloning supported: Yes
Chip / MCU: Bosch MED17.1
Notes: Same ODIS SVM procedure. 2022 is among last model years with VR6 option - VR6 dropped for 2024 CA2 redesign.

Request help with this module

04E-907-309 Verify by VIN 2023 OBD Programming Port

Documented for 2023 within this generation. Confirm the exact vehicle by VIN.

Coverage and replacement notes

Documented years: 2023

Donor must match part family 04E-907-309 - requires cloning

Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.

Part number: 04E-907-309
Protocol / method: OBD Programming Port
Coding required: Yes
Cloning supported: Yes
Chip / MCU: Bosch MED17.1
Notes: VR6 final year on Atlas - discontinued entirely for 2024 CA2 redesign. ODIS SVM procedure.

Request help with this module

TCM - 8-speed (J217) 3 records

0D9-927-158 Verify by VIN 2020 OBD Programming Port

Documented for 2020 within this generation. Confirm the exact vehicle by VIN.

Coverage and replacement notes

Documented years: 2020

Donor must match part family 0D9-927-158 - requires cloning

Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.

Part number: 0D9-927-158
Protocol / method: OBD Programming Port
Coding required: Yes
Cloning supported: Yes
Chip / MCU: Bosch TCU Gen3
Notes: ODIS basic settings and shift adaptation required. 4Motion AWD: additional Haldex module coding.

Request help with this module

0D9-927-158 Verify by VIN 2022 OBD Programming Port

Documented for 2022 within this generation. Confirm the exact vehicle by VIN.

Coverage and replacement notes

Documented years: 2022

Donor must match part family 0D9-927-158 - requires cloning

Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.

Part number: 0D9-927-158
Protocol / method: OBD Programming Port
Coding required: Yes
Cloning supported: Yes
Chip / MCU: Bosch TCU Gen3
Notes: ODIS basic settings and adaptation. 4Motion: additional Haldex coding.

Request help with this module

0D9-927-158 Verify by VIN 2023 OBD Programming Port

Documented for 2023 within this generation. Confirm the exact vehicle by VIN.

Coverage and replacement notes

Documented years: 2023

Donor must match part family 0D9-927-158 - requires cloning

Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.

Part number: 0D9-927-158
Protocol / method: OBD Programming Port
Coding required: Yes
Cloning supported: Yes
Chip / MCU: Bosch TCU Gen3
Notes: ODIS basic settings and shift adaptation. 4Motion: Haldex coding.

Request help with this module

ECM - 2.0L TSI (J623) CA2 Verify by VIN 2024-2026 1 record

Documented for 2024-2026 within this generation. Confirm the exact vehicle by VIN.

Coverage and replacement notes

Documented years: 2024, 2025, 2026

Donor must match part family 3QF-907-115-A - requires cloning

Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.

Part number: 3QF-907-115-A
Protocol / method: OBD Programming Port
Coding required: Yes
Cloning supported: Yes
Chip / MCU: Bosch MG1CS111
Notes: Online module coding required via our ODIS diagnostic system. 2024 CA2 only has 2.0T - VR6 discontinued. CA2 ECM part numbers begin with 3QF prefix. SVM channel + Immo5 component protection clearance. Do not order CA1 ECM (06K prefix) for CA2 Atlas.

Request help with this module

TCM - 8-speed DSG (J217) CA2 Verify by VIN 2024-2026 1 record

Documented for 2024-2026 within this generation. Confirm the exact vehicle by VIN.

Coverage and replacement notes

Documented years: 2024, 2025, 2026

Donor must match part family 3QF-927-158-A - requires cloning

Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.

Part number: 3QF-927-158-A
Protocol / method: OBD Programming Port
Coding required: Yes
Cloning supported: Yes
Chip / MCU: Bosch TCU CA2
Notes: ODIS basic settings and adaptation required. CA2 uses updated DSG variant. 4Motion: CA2 rear differential control module coding required separately.

Request help with this module

TCM / Transmission

TCU - 09G 6-Speed Auto 3 records

09G927750 Verify by VIN 2018-2019 OBD

Documented for 2018-2019 within this generation. Confirm the exact vehicle by VIN.

Coverage and replacement notes

Documented years: 2018, 2019

Donor must match part family 09G927750 - requires cloning

Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.

Part number: 09G927750
Protocol / method: OBD
Coding required: Yes
Cloning supported: Yes
Chip / MCU: Continental SIM2K-240/241
Notes: Adaptation required via VCDS/ODIS, ATF G055025A2, basic setting must be performed

Request help with this module

09G927750 Verify by VIN 2022-2023 J2534

Documented for 2022-2023 within this generation. Confirm the exact vehicle by VIN.

Coverage and replacement notes

Documented years: 2022, 2023

Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.

Part number: 09G927750
Protocol / method: J2534
Coding required: Yes
Cloning supported: No
Chip / MCU: Continental TC1797
Notes: VAG-COM/VCDS required for coding. ATF spec G 055 162 A2. TCU adaptation required after installation.

Request help with this module

09G927750 Verify by VIN 2025-2026 J2534

Documented for 2025-2026 within this generation. Confirm the exact vehicle by VIN.

Coverage and replacement notes

Documented years: 2025, 2026

Donor must match part family 09G927750 - requires cloning

Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.

Part number: 09G927750
Protocol / method: J2534
Coding required: Yes
Cloning supported: Yes
Chip / MCU: Continental MPC5674F
Notes: ATF G052162A2, basic setting required after install, VCDS coding mandatory

Request help with this module

TCU - 09M 6-Speed Auto Verify by VIN 2018-2019 1 record

Documented for 2018-2019 within this generation. Confirm the exact vehicle by VIN.

Coverage and replacement notes

Documented years: 2018, 2019

Donor must match part family 09M927750 - requires cloning

Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.

Part number: 09M927750
Protocol / method: OBD
Coding required: Yes
Cloning supported: Yes
Chip / MCU: Continental SIM2K-240/241
Notes: Adaptation via VCDS/ODIS required, ATF G055025A2, clutch adaptation procedure needed

Request help with this module

TCU - 8HP75 8-Speed Auto Verify by VIN 2020-2021 1 record

Documented for 2020-2021 within this generation. Confirm the exact vehicle by VIN.

Coverage and replacement notes

Documented years: 2020, 2021

Donor must match part family 09D927750 - requires cloning

Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.

Part number: 09D927750
Protocol / method: J2534
Coding required: Yes
Cloning supported: Yes
Chip / MCU: Continental TC1797
Notes: Requires VCDS/VAG-COM for adaptation. ATF spec VW G 060162 A2. Transmission relearn via basic settings required.

Request help with this module

TCU - 09S 8-Speed Auto 2 records

09S927158 Verify by VIN 2022-2023 J2534

Documented for 2022-2023 within this generation. Confirm the exact vehicle by VIN.

Coverage and replacement notes

Documented years: 2022, 2023

Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.

Part number: 09S927158
Protocol / method: J2534
Coding required: Yes
Cloning supported: No
Chip / MCU: Continental TC1797
Notes: ODIS required for programming. ATF spec G 060 162 A2. Basic setting and adaptation mandatory.

Request help with this module

09S927158 Verify by VIN 2025-2026 J2534

Documented for 2025-2026 within this generation. Confirm the exact vehicle by VIN.

Coverage and replacement notes

Documented years: 2025, 2026

Donor must match part family 09S927158 - requires cloning

Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.

Part number: 09S927158
Protocol / method: J2534
Coding required: Yes
Cloning supported: Yes
Chip / MCU: ZF Aisin TC1782
Notes: ATF G060162A2, transmission adaptation reset required, ODIS coding

Request help with this module

TCU - 09G 6-Speed Auto (TF-60SN) Verify by VIN 2024 1 record

Documented for 2024 within this generation. Confirm the exact vehicle by VIN.

Coverage and replacement notes

Documented years: 2024

Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.

Part number: 09G927750
Protocol / method: J2534
Coding required: Yes
Cloning supported: No
Chip / MCU: Continental
Notes: Continental TCU, requires VCDS/OEM scan tool for adaptation, ATF G 055 162 A2, basic setting channel 000 required after install

Request help with this module

TCU - 0CK 8-Speed Auto (DL382) Verify by VIN 2024 1 record

Documented for 2024 within this generation. Confirm the exact vehicle by VIN.

Coverage and replacement notes

Documented years: 2024

Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.

Part number: 0CK927769
Protocol / method: J2534
Coding required: Yes
Cloning supported: No
Chip / MCU: Continental
Notes: Continental TCU, requires ODIS programming and component protection unlock, ATF G 060 162 A2, clutch adaptation required

Request help with this module

TCU - 0D9 7-Speed DSG Verify by VIN 2025-2026 1 record

Documented for 2025-2026 within this generation. Confirm the exact vehicle by VIN.

Coverage and replacement notes

Documented years: 2025, 2026

Donor must match part family 0D9927769 - requires cloning

Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.

Part number: 0D9927769
Protocol / method: Bench
Coding required: Yes
Cloning supported: No
Chip / MCU: Continental TC1797
Notes: DSG fluid G052182A2, clutch adaptation required, component protection active

Request help with this module

BCM / Body electronics

Central Electric Module / BCM (J519) Verify by VIN 2018 1 record

Documented for 2018 within this generation. Confirm the exact vehicle by VIN.

Coverage and replacement notes

Documented years: 2018

Donor must match part family 5QD-937-086 - requires cloning

Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.

Part number: 5QD-937-086
Security: IMMO5
Coding required: Yes
Cloning supported: Yes
Notes: ODIS-S coding and adaptation required. Immo5 security - requires dealer-level authentication for coding. Clone transfers adaptation data. New unit requires full ODIS component protection clearance. Coordinate with VW dealer or authorized immo service.

Request help with this module

Convenience Can Gateway (J533) Verify by VIN 2018 1 record

Documented for 2018 within this generation. Confirm the exact vehicle by VIN.

Coverage and replacement notes

Documented years: 2018

Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.

Part number: 5Q0-907-530-AN
Security: uds
Coding required: Yes
Cloning supported: No
Notes: ODIS gateway replacement procedure. Flash new firmware. All bus topology data re-initialized. Do not replace without ODIS-E or ODIS-S with valid SVM channel.

Request help with this module

Central Electric Module - J519 4 records

5QD-937-086-A Verify by VIN 2019

Documented for 2019 within this generation. Confirm the exact vehicle by VIN.

Coverage and replacement notes

Documented years: 2019

Donor must match part family 5QD-937-086-A - requires cloning

Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.

Part number: 5QD-937-086-A
Security: IMMO5
Coding required: Yes
Cloning supported: Yes
Notes: Immo5 component protection - online module coding required via our ODIS diagnostic system with factory authorization. Cloning transfers adaptation data and avoids full re-coding. New unit requires ODIS-S coding, channel adaptation, and VW component protection clearance via the factory portal. Failure to clear component protection results in partial function only.

Request help with this module

5QD-937-086-B Verify by VIN 2020

Documented for 2020 within this generation. Confirm the exact vehicle by VIN.

Coverage and replacement notes

Documented years: 2020

Donor must match part family 5QD-937-086-B - requires cloning

Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.

Part number: 5QD-937-086-B
Security: IMMO5
Coding required: Yes
Cloning supported: Yes
Notes: Online module coding required via our ODIS diagnostic system. Immo5 component protection clearance via VW factory portal. Clone transfers adaptation data. New unit requires full ODIS-S coding sequence and component protection release.

Request help with this module

5QD-937-086-C Verify by VIN 2022

Documented for 2022 within this generation. Confirm the exact vehicle by VIN.

Coverage and replacement notes

Documented years: 2022

Donor must match part family 5QD-937-086-C - requires cloning

Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.

Part number: 5QD-937-086-C
Security: IMMO5
Coding required: Yes
Cloning supported: Yes
Notes: Online module coding required via our ODIS diagnostic system. Immo5 component protection clearance via VW factory portal. MIB3 variant - J519 suffix differs from MIB2 builds.

Request help with this module

5QD-937-086-D Verify by VIN 2023

Documented for 2023 within this generation. Confirm the exact vehicle by VIN.

Coverage and replacement notes

Documented years: 2023

Donor must match part family 5QD-937-086-D - requires cloning

Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.

Part number: 5QD-937-086-D
Security: IMMO5
Coding required: Yes
Cloning supported: Yes
Notes: Online module coding required via our ODIS diagnostic system. Immo5 component protection. Suffix D for 2023 final CA1 production - verify via ODIS VIN.

Request help with this module

Convenience CAN Gateway - J533 Verify by VIN 2019 1 record

Documented for 2019 within this generation. Confirm the exact vehicle by VIN.

Coverage and replacement notes

Documented years: 2019

Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.

Part number: 5Q0-907-530-BA
Security: uds
Coding required: Yes
Cloning supported: No
Notes: Online module coding required via our ODIS diagnostic system. ODIS-E SVM (Software Version Management) flash mandatory. Replacement initializes all CAN bus topology data. Do not attempt without a valid SVM coding channel - partial flash can brick the gateway.

Request help with this module

Gateway - J533 Verify by VIN 2020 1 record

Documented for 2020 within this generation. Confirm the exact vehicle by VIN.

Coverage and replacement notes

Documented years: 2020

Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.

Part number: 5Q0-907-530-CA
Security: uds
Coding required: Yes
Cloning supported: No
Notes: Online module coding required via our ODIS diagnostic system. SVM channel required. Full CAN topology re-initialization on replacement.

Request help with this module

Central Electric Module (J519) Verify by VIN 2021 1 record

Documented for 2021 within this generation. Confirm the exact vehicle by VIN.

Coverage and replacement notes

Documented years: 2021

Donor must match part family 5QD-937-086-C - requires cloning

Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.

Part number: 5QD-937-086-C
Security: IMMO5
Coding required: Yes
Cloning supported: Yes
Notes: Immo5 component protection. ODIS coding. VW dealer portal for clearance.

Request help with this module

Gateway (J533) Verify by VIN 2021 1 record

Documented for 2021 within this generation. Confirm the exact vehicle by VIN.

Coverage and replacement notes

Documented years: 2021

Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.

Part number: 5Q0-907-530-DA
Security: uds
Coding required: Yes
Cloning supported: No
Notes: ODIS SVM flash.

Request help with this module

Gateway - J533 (MIB3 variant) Verify by VIN 2022 1 record

Documented for 2022 within this generation. Confirm the exact vehicle by VIN.

Coverage and replacement notes

Documented years: 2022

Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.

Part number: 5Q0-907-530-DA
Security: uds
Coding required: Yes
Cloning supported: No
Notes: Online module coding required via our ODIS diagnostic system. SVM channel required for flash.

Request help with this module

Gateway - J533 (MIB3) Verify by VIN 2023 1 record

Documented for 2023 within this generation. Confirm the exact vehicle by VIN.

Coverage and replacement notes

Documented years: 2023

Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.

Part number: 5Q0-907-530-DA
Security: uds
Coding required: Yes
Cloning supported: No
Notes: Online module coding required via our ODIS diagnostic system. SVM channel required. MIB3 gateway.

Request help with this module

Central Electric Module - J519 (CA2) Verify by VIN 2024-2026 1 record

Documented for 2024-2026 within this generation. Confirm the exact vehicle by VIN.

Coverage and replacement notes

Documented years: 2024, 2025, 2026

Donor must match part family 3QF-937-086-A - requires cloning

Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.

Part number: 3QF-937-086-A
Security: IMMO5
Coding required: Yes
Cloning supported: Yes
Notes: Online module coding required via our ODIS diagnostic system. CA2-specific J519 - not interchangeable with CA1. Immo5 component protection clearance via VW factory portal. New unit requires full ODIS-S coding and component protection release.

Request help with this module

Gateway - J533 (CA2 MIB3) Verify by VIN 2024-2026 1 record

Documented for 2024-2026 within this generation. Confirm the exact vehicle by VIN.

Coverage and replacement notes

Documented years: 2024, 2025, 2026

Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.

Part number: 3QF-907-530-A
Security: uds
Coding required: Yes
Cloning supported: No
Notes: Online module coding required via our ODIS diagnostic system. CA2 gateway architecture differs from CA1. SVM channel required for CA2 flash. Entire CA2 CAN topology re-initialized on replacement.

Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.

Part number: 5QD959655J
Location: Under center console
Manufacturer: Continental
Notes: Requires VCDS or ODIS for coding and adaptation. Gateway access control may require online login. Battery disconnect 90 seconds before removal.

Request help with this module

ABS / Brakes

ABS/ESC Module (Bosch 9.1) Verify by VIN 2018 1 record

Documented for 2018 within this generation. Confirm the exact vehicle by VIN.

Coverage and replacement notes

Documented years: 2018

Donor must match part family 5QD-614-517 - requires cloning

Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.

Part number: 5QD-614-517
Cloning supported: Yes
Notes: ODIS coding and basic settings required after replacement. Brake bleed procedure via ODIS automated cycle. Wheel speed sensor integrity check before module replacement - DTC C0031 commonly misdiagnosed as module failure.

Request help with this module

ABS/ESC Module - Bosch 9.1 Verify by VIN 2019 1 record

Documented for 2019 within this generation. Confirm the exact vehicle by VIN.

Coverage and replacement notes

Documented years: 2019

Donor must match part family 5QD-614-517 - requires cloning

Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.

Part number: 5QD-614-517
Cloning supported: Yes
Notes: Online module coding required via our ODIS diagnostic system. ODIS coding and basic settings mandatory after replacement. Automated brake bleed cycle available in ODIS - use it to ensure full system bleed. DTC C0031/C0034 are commonly caused by a faulty wheel speed sensor connector rather than the ABS module - verify sensor harnesses before condemning the module.

Request help with this module

ABS/ESC - Bosch 9.1 3 records

5QD-614-517 Verify by VIN 2020

Documented for 2020 within this generation. Confirm the exact vehicle by VIN.

Coverage and replacement notes

Documented years: 2020

Donor must match part family 5QD-614-517 - requires cloning

Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.

Part number: 5QD-614-517
Cloning supported: Yes
Notes: Online module coding required via our ODIS diagnostic system. ODIS coding, basic settings, and automated bleed cycle. Check wheel speed sensor connectors before condemning module on C003x DTCs.

Request help with this module

5QD-614-517 Verify by VIN 2022

Documented for 2022 within this generation. Confirm the exact vehicle by VIN.

Coverage and replacement notes

Documented years: 2022

Donor must match part family 5QD-614-517 - requires cloning

Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.

Part number: 5QD-614-517
Cloning supported: Yes
Notes: Online module coding required via our ODIS diagnostic system. ODIS coding, basic settings, automated bleed cycle.

Request help with this module

5QD-614-517 Verify by VIN 2023

Documented for 2023 within this generation. Confirm the exact vehicle by VIN.

Coverage and replacement notes

Documented years: 2023

Donor must match part family 5QD-614-517 - requires cloning

Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.

Part number: 5QD-614-517
Cloning supported: Yes
Notes: Online module coding required via our ODIS diagnostic system. ODIS coding, basic settings, automated bleed cycle.

Request help with this module

ABS/ESC (Bosch 9.1) Verify by VIN 2021 1 record

Documented for 2021 within this generation. Confirm the exact vehicle by VIN.

Coverage and replacement notes

Documented years: 2021

Donor must match part family 5QD-614-517 - requires cloning

Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.

Part number: 5QD-614-517
Cloning supported: Yes
Notes: ODIS coding and basic settings. Bleed cycle.

Request help with this module

ABS/ESC - CA2 (Bosch 9.3) Verify by VIN 2024-2026 1 record

Documented for 2024-2026 within this generation. Confirm the exact vehicle by VIN.

Coverage and replacement notes

Documented years: 2024, 2025, 2026

Donor must match part family 3QF-614-517-A - requires cloning

Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.

Part number: 3QF-614-517-A
Cloning supported: Yes
Notes: Online module coding required via our ODIS diagnostic system. CA2-specific ABS module with Bosch 9.3 architecture - not interchangeable with CA1 Bosch 9.1 unit. ODIS coding, basic settings, automated bleed cycle.

Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.

Part number: 3QF 920, 5WA 920
Cloning supported: Yes
Notes: IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.

Request help with this module

Steering Angle Sensor (SAS) 4 records

Part 1 Verify by VIN 2018-2019

Documented for 2018-2019 within this generation. Confirm the exact vehicle by VIN.

Coverage and replacement notes

Documented years: 2018, 2019

Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.

Coding required: Yes
Notes: INTEGRATED (clock spring / steering column module

Request help with this module

Part 2 Verify by VIN 2018-2019

Documented for 2018-2019 within this generation. Confirm the exact vehicle by VIN.

Coverage and replacement notes

Documented years: 2018, 2019

Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.

Coding required: Yes
Notes: cross-year extension)

Request help with this module

Part 3 Verify by VIN 2020-2023

Documented for 2020-2023 within this generation. Confirm the exact vehicle by VIN.

Coverage and replacement notes

Documented years: 2020, 2021, 2022, 2023

Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.

Coding required: Yes
Notes: INTEGRATED (clock spring 5Q0 959 654 family)

Request help with this module

Part 4 Verify by VIN 2024-2026

Documented for 2024-2026 within this generation. Confirm the exact vehicle by VIN.

Coverage and replacement notes

Documented years: 2024, 2025, 2026

Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.

Coding required: Yes
Notes: INTEGRATED (clock spring 3QF 959 654 family)

Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.

Part number: 3QF-927-750-A
Notes: ODIS CA2 4Motion adaptation and basic settings required. CA2 AWD uses updated rear differential control architecture.

Request help with this module

Reference information for 2018-2026. Coverage can vary by year and equipment. Confirm the VIN and full part number before ordering a replacement.

Vehicle overview

Vehicle: Volkswagen Atlas
Model years: 2018-2026
Generation: 1st Gen

TOOL ACCESS MATRIX

Tools we use for this vehicle

We provide the software and equipment for the agreed work. The exact tool and procedure depend on your year, VIN and module.

Factory scan, coding, and calibration access

VW ODIS-S / ODIS-E

Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.

ADAS scan, setup, and verification

Autel, Launch Tech, Topdon

Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.

Bench cloning and chip-level recovery

Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog

Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.

Bench/chip-level only

Tool requirements

Basic OBD2 scanner

View capabilities and limitations

Supported work

Read codes on SRS systems (101 documented rows)
Read codes on ECU systems (19 documented rows)
Read codes on BCM systems (14 documented rows)
Read codes on TCU / TCM systems (10 documented rows)
Read codes on ABS systems (7 documented rows)
Read codes on IPC / SAS systems (20 documented rows)
Read codes on Keys systems (7 documented rows)
Read codes on Immobilizer systems (7 documented rows)
Read codes on Accessory systems (20 documented rows)

Factory programming software (J2534)

View capabilities and limitations

Supported work

Factory scan, coding, and calibration access: Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.

PLATFORM

Know this platform

This platform uses HS-CAN (Powertrain), Comfort CAN, Extended CAN, LIN (sensors/switches), MOST (audio on SEL) with ISO 15765-4 CAN (11-bit / 500kbps).

CAN: HS-CAN (Powertrain), Comfort CAN, Extended CAN, LIN (sensors/switches), MOST (audio on SEL)
OBD: ISO 15765-4 CAN (11-bit / 500kbps)

CAN architecture varies by year OBD protocol varies by year

GENERATION SERVICE SNAPSHOT

Generation service summary for Volkswagen Atlas 1st Gen (2018-2026)

Generation coverage

This page consolidates Volkswagen Atlas service data for 2018-2026 across 9 model years; service information is available for 9 years.

Choose a year

ADAS coverage

Merged ADAS coverage includes 36 system records, including Front Assist (Forward Collision Warning + AEB) (2018), Blind Spot Monitor (Side Assist) (2018), Rear Traffic Alert (Cross Traffic Alert) (2018), and Lane Assist (Lane Keep Assist) (2018). Year-marked systems apply only to the shown range.

View ADAS data

Calibration triggers

This generation has 42 merged calibration trigger records. Trigger applicability can vary by year - verify by VIN before setup.

View triggers

Programmable modules

The merged generation page indexes 191 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, IPC coverage. Part numbers are confirmed for the exact year/VIN.

View modules

Core Auto Logic capability

Core Auto Logic supports generation-level diagnostics, ADAS calibration, module programming, and security-access planning for the Volkswagen Atlas 2018-2026 span, with exact-year validation before service. Mail-in module service is available nationwide.

Get a quote

CALIBRATION

Do I need calibration?

Windshield Replacement 18

Front camera (Lane Assist

2018

required

Static ODIS camera calibration required. Target board placement per workshop manual WSP 96-XX. Windshield must be OEM or approved equivalent with correct acoustic film. Allow glass adhesive to fully cure before calibration.

Front Assist camera component)

2018

required

Lane Assist camera (J234-equivalent front camera)

2019

required

ODIS static camera calibration required after any windshield replacement. Target board placement per VW workshop manual. Windshield must be OEM or approved equivalent with correct acoustic film and proper primer application. Allow full adhesive cure time before calibration attempt.

2024-2026

required

CA2-specific ODIS static camera calibration. EyeQ4H target specs differ from CA1 EyeQ4 - use 2024 Atlas workshop manual revision. OEM-equivalent windshield required. Full adhesive cure.

Front Bumper Repair or Replacement 17

Front Assist radar (ACC

2018

required

ODIS static radar alignment required. Vehicle at curb weight, level surface, radar target board at specified distance. Inspect radar bracket for deformation. Radar aim DTC will set if bracket bent even slightly.

AEB

2018

required

Any Collision 20

ACU (J234)

2018

required

Full scan mandatory. SRS crash data in J234 - clear or replace. All ADAS modules potentially affected. Do not clear codes without physical inspection of sensor mounting integrity.

all deployed sensors

2018

required

Full scan mandatory. SRS crash data in J234 - clear or replace. All ADAS modules potentially affected. Do not clear codes without physical inspection of sensor mounting integrity.

ADAS modules

2018

required

Full scan mandatory. SRS crash data in J234 - clear or replace. All ADAS modules potentially affected. Do not clear codes without physical inspection of sensor mounting integrity.

J234 ACU

2019

required

Full ODIS module scan mandatory. SRS crash data stored in J234 - clear or replace before vehicle delivery. Do not clear codes without physically confirming sensor and bracket integrity. All ADAS modules in the collision zone must be recalibrated.

all deployed airbag sensors

2019

required

2024-2026

required

Full ODIS CA2 scan. SRS crash data - clear or replace CA2 J234. All CA2 ADAS modules in collision zone recalibrated.

Any Module Replacement 22

All ODIS-coded modules

2018

required

ODIS SVM channel required for all module flashing. Component protection clearance required for ECM, BCM, and immobilizer-linked modules. Coordinate with VW dealer portal for Immo5 clearances.

All Immo5-coded modules - J623

2019

required

Online module coding required via our ODIS diagnostic system for all replacement modules. Immo5 component protection clearance required for J623 (ECM) and J519 (BCM). SVM channel required for J533 gateway flash. Coordinate VW factory portal authorization before beginning module swaps.

J519

2019

required

J533

2019

required

2024-2026

required

Online module coding required via our ODIS diagnostic system. CA2-specific 3QF-prefix parts only. Immo5 component protection clearance for ECM and BCM.

J217

2024-2026

required

Online module coding required via our ODIS diagnostic system. CA2-specific 3QF-prefix parts only. Immo5 component protection clearance for ECM and BCM.

ABS

2024-2026

required

Online module coding required via our ODIS diagnostic system. CA2-specific 3QF-prefix parts only. Immo5 component protection clearance for ECM and BCM.

Forward Radar Replacement 2

2018-2019

Yes

Radar module replacement requires alignment/calibration using ODIS-S.

2020, 2022

Yes

Radar module replacement requires alignment/calibration using ODIS-S.

BSM Sensor Replacement 2

2018-2019

Yes

Blind spot monitoring sensor replacement requires calibration using ODIS-S.

2020-2026

Yes

Blind spot monitoring sensor replacement requires calibration using ODIS-S.

Mirror Replacement 2

2018-2019

Conditional

If BSD sensor is mirror-integrated, recalibration required. Verify sensor location; use ODIS-S if applicable.

2020-2026

2023

required

ODIS static radar calibration. Curb weight, level surface. Inspect ARS4-B bracket.

Rear Bumper Repair 5

Side Assist radar

2021

required

ODIS radar coding and calibration.

PDC

2021

required

ODIS radar coding and calibration.

Side Assist

2023

required

ODIS rear radar calibration and PDC sensor coding.

Year	VIN split	Infotainment	Wireless CarPlay	Wireless Android Auto	Trim notes
2018	VIN pos 4-6 identifies model. VW WMI: 3VW, WVW, 1VW. Position 4-6 = model code. Position 10 = model year code.				Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
2019	VIN pos 4-6 identifies model. VW WMI: 3VW, WVW, 1VW. Position 4-6 = model code. Position 10 = model year code.				Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
2020	VIN pos 4-6 identifies model. VW WMI: 3VW, WVW, 1VW. Position 4-6 = model code. Position 10 = model year code.	Volkswagen MIB3	1		Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
2021	VIN pos 4-6 identifies model. VW WMI: 3VW, WVW, 1VW. Position 4-6 = model code. Position 10 = model year code.	Volkswagen MIB3	1		Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
2022	VIN pos 4-6 identifies model. VW WMI: 3VW, WVW, 1VW. Position 4-6 = model code. Position 10 = model year code.	Volkswagen MIB3	1		Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
2023	VIN pos 4-6 identifies model. VW WMI: 3VW, WVW, 1VW. Position 4-6 = model code. Position 10 = model year code.	Volkswagen MIB3+	1	1	Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
2024	VIN pos 4-6 identifies model. VW WMI: 3VW, WVW, 1VW. Position 4-6 = model code. Position 10 = model year code.	Volkswagen MIB3+	1	1	Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
2025	VIN pos 4-6 identifies model. VW WMI: 3VW, WVW, 1VW. Position 4-6 = model code. Position 10 = model year code.	Volkswagen MIB3+	1	1	Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
2026	VIN pos 4-6 identifies model. VW WMI: 3VW, WVW, 1VW. Position 4-6 = model code. Position 10 = model year code.	Volkswagen MIB3+	1	1	Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.

YEAR-BY-YEAR CHANGES

What changes across 2018-2026

Differences versus the generation reference. Years not listed here match the shared platform data on this page.

2020

Infotainment: Volkswagen MIB3
Wireless CarPlay: Yes

2021

Infotainment: Volkswagen MIB3
Wireless CarPlay: Yes

2022

Infotainment: Volkswagen MIB3
Wireless CarPlay: Yes

2023

Infotainment: Volkswagen MIB3+
Wireless CarPlay: Yes
Wireless Android Auto: Yes

2024

Infotainment: Volkswagen MIB3+
Wireless CarPlay: Yes
Wireless Android Auto: Yes

2025

Infotainment: Volkswagen MIB3+
Wireless CarPlay: Yes
Wireless Android Auto: Yes

2026

Infotainment: Volkswagen MIB3+
Wireless CarPlay: Yes
Wireless Android Auto: Yes

36 ADAS systems documented across the 2018-2026 generation. Rows that apply to only part of the generation carries a year badge.

Filter by year

ADAS CALIBRATION MATRIX

ADAS systems on this vehicle

IQ.Drive - Front Assist, Side Assist, Lane Assist, Adaptive Cruise Control (SE and above)

Scroll for part numbers and Details

System	Type	Category	Cal. Type	Supported	Part #
Front Assist (Forward Collision Warning + AEB) 2018	Front Radar + Camera	Fused	Static	YES	5QA-907-561
Blind Spot Monitor (Side Assist) 2018	Side Radar	Radar	Static + Dynamic	YES	5Q0-907-107-C (L), 5Q0-907-107-D (R)
Rear Traffic Alert (Cross Traffic Alert) 2018	Side Radar	Radar	Static	YES	5Q0-907-107-C (L), 5Q0-907-107-D (R)
Lane Assist (Lane Keep Assist) 2018	Forward Camera	Camera	Static	YES	5Q0-980-653-A
Adaptive Cruise Control (ACC) 2018	Front Radar	Radar	Static	YES	5QA-907-561
Park Distance Control (PDC) 2018	Ultrasonic	Ultrasonic	None	YES	VARIOUS - 8 SENSORS TOTAL (4F, 4R)
Front Assist - AEB + Forward Collision Warning 2019	Front Radar + Camera	Fused	Static	YES	5QA-907-561-A
Side Assist - Blind Spot Monitor 2019	Side Radar	Radar	Static + Dynamic	YES	5Q0-907-107-D (L), 5Q0-907-107-E (R)
Rear Traffic Alert - Cross Traffic 2019	Side Radar	Radar	Static	YES	5Q0-907-107-D (L), 5Q0-907-107-E (R)
Lane Assist - Lane Keep + Lane Departure Warning 2019	Forward Camera	Camera	Static	YES	5Q0-980-653-B
Adaptive Cruise Control (ACC) 2019	Front Radar	Radar	Static	YES	5QA-907-561-A
Park Distance Control (PDC) 2019	Ultrasonic	Ultrasonic	None	YES	VARIOUS - 4 FRONT
Front Assist - AEB + FCW + Pedestrian Detection 2020	Front Radar + Camera	Fused	Static	YES	5QA-907-561-B
Side Assist - Blind Spot Monitor 2020	Side Radar	Radar	Static + Dynamic	YES	5Q0-907-107-E
Rear Traffic Alert (CTA) 2020	Side Radar	Radar	Static	YES	5Q0-907-107-E
Lane Assist - LKA + LDW 2020	Forward Camera	Camera	Static	YES	5Q0-980-653-C
Travel Assist - Lane Centering + ACC (SEL trim) 2020	Fused (Radar + Camera)	Fused	Static	YES	5Q0-980-653-C
Park Distance Control (PDC) 2020	Ultrasonic	Camera	None	YES	-
Front Assist with AEB 2021	Front Radar + Camera	Fused	Static	YES	5QA-907-561-C
Side Assist (BSM) 2021	Side Radar	Radar	Static + Dynamic	YES	5Q0-907-107-F
Lane Assist + Lane Centering 2021	Forward Camera	Camera	Static	YES	5Q0-980-653-D
Travel Assist (Level 2) 2021	Fused (Radar + Camera)	Fused	Static	YES	5Q0-980-653-D
Park Distance Control (PDC) 2021	Ultrasonic	Camera	None	YES	-
Front Assist - AEB + FCW + Pedestrian + Emergency Assist 2022	Front Radar + Camera	Fused	Static	YES	5QA-907-561-C
Side Assist + Rear Traffic Alert 2022-2023	Side Radar	Radar	Static + Dynamic	YES	5Q0-907-107-F
Travel Assist - Lane Centering + ACC + Emergency Assist 2022	Fused (Radar + Camera)	Fused	Static	YES	5Q0-980-653-D
Lane Assist + Lane Centering 2022	Forward Camera	Camera	Static	YES	5Q0-980-653-D
Park Distance Control + Area View (optional) 2022	Ultrasonic + Camera	Camera	None	YES	-
Front Assist - AEB + FCW + Emergency Assist 2023	Front Radar + Camera	Fused	Static	YES	5QA-907-561-C
Travel Assist + Emergency Assist + Lane Centering 2023	Fused (Radar + Camera)	Fused	Static	YES	5Q0-980-653-D
Park Distance Control (PDC) 2023	Ultrasonic	Camera	None	YES	-
Front Assist - AEB + FCW + Pedestrian + Emergency Assist 2024-2026	Front Radar + Camera	Fused	Static	YES	3QF-907-561-A
Side Assist + Rear Traffic Alert 2024-2026	Side Radar	Radar	Static + Dynamic	YES	3QF-907-107-A
Travel Assist + Lane Centering + Emergency Assist 2024-2026	Fused (Radar + Camera)	Fused	Static	YES	3QF-980-654-A
IQ.LIGHT - Matrix LED Headlamps (standard) 2024-2026	Camera + Lighting	Camera	Static	YES	3QF-941-035-A (L), 3QF-941-036-A (R)
Park Assist + Rear View Camera 2024-2026	Ultrasonic + Camera	Ultrasonic	Static	YES	-

WHEN IS CALIBRATION REQUIRED?

Triggers for ADAS recalibration

Windshield Replacement 2018 Affected: Front camera (Lane Assist, Front Assist camera component)

Front Bumper Repair or Replacement 2018 Affected: Front Assist radar (ACC, AEB, FCW)

Rear Bumper Repair or Replacement 2018 Affected: Side Assist radar (both sides), Rear Traffic Alert, PDC rear sensors

ODIS calibration for rear radar modules. PDC sensor count recoding if sensors disturbed. Confirm no foam insulation obstructing radar modules behind bumper skin.

Any Collision 2018 Affected: ACU (J234), all deployed sensors, ADAS modules

Full scan mandatory. SRS crash data in J234 - clear or replace. All ADAS modules potentially affected. Do not clear codes without physical inspection of sensor mounting integrity.

Any Module Replacement 2018 Affected: All ODIS-coded modules

ODIS SVM channel required for all module flashing. Component protection clearance required for ECM, BCM, and immobilizer-linked modules. Coordinate with VW dealer portal for Immo5 clearances.

Forward Radar Replacement 2018-2019

Radar module replacement requires alignment/calibration using ODIS-S.

BSM Sensor Replacement 2018-2019

Blind spot monitoring sensor replacement requires calibration using ODIS-S.

Mirror Replacement 2018-2019

If BSD sensor is mirror-integrated, recalibration required. Verify sensor location; use ODIS-S if applicable.

Windshield Replacement 2019 Affected: Lane Assist camera (J234-equivalent front camera), Front Assist camera component

Front Bumper Repair or Replacement 2019 Affected: Front Assist radar (ACC + AEB + FCW)

Rear Bumper Repair or Replacement 2019 Affected: Side Assist radar (both sides), Rear Traffic Alert, PDC rear sensors

ODIS calibration for both rear radar modules after bumper repair. PDC sensor count re-coding if sensors were removed. Confirm no foam insert is obstructing radar face behind repaired fascia.

Any Collision 2019 Affected: J234 ACU, all deployed airbag sensors, all ADAS modules in repair zone

Any Module Replacement 2019 Affected: All Immo5-coded modules - J623, J519, J533, J217

Windshield Replacement 2020 Affected: Lane Assist camera, Front Assist camera, Travel Assist (SEL)

ODIS static camera calibration required. Target board per workshop manual. OEM-equivalent windshield with correct acoustic film. Adhesive full cure before calibration.

Front Bumper Repair or Replacement 2020 Affected: Front Assist radar, ACC, AEB, Travel Assist radar

ODIS static radar alignment required. Curb weight, level surface. Inspect radar mounting bracket for deformation before calibration.

Rear Bumper Repair or Replacement 2020 Affected: Side Assist radar, Rear Traffic Alert, PDC rear sensors

ODIS calibration for rear radar sensors. PDC sensor count re-coding. No foam obstruction behind fascia.

Any Collision 2020 Affected: J234 ACU, deployed sensors, all ADAS in repair zone

Full ODIS scan. SRS crash data in J234 - clear or replace. All ADAS modules in collision zone recalibrated before delivery.

Any Module Replacement 2020 Affected: J623 ECM, J519 BCM, J533 GW, J217 TCM

Online module coding required via our ODIS diagnostic system. Immo5 component protection clearance for ECM and BCM. SVM channel for gateway.

Forward Radar Replacement 2020, 2022

Radar module replacement requires alignment/calibration using ODIS-S.

BSM Sensor Replacement 2020-2026

Blind spot monitoring sensor replacement requires calibration using ODIS-S.

Mirror Replacement 2020-2026

If BSD sensor is mirror-integrated, recalibration required. Verify sensor location; use ODIS-S if applicable.

Windshield Replacement 2021 Affected: Lane Assist camera, Travel Assist

ODIS static calibration. EyeQ4 target spec - confirm current workshop manual revision for 2021+.

Front Bumper Repair 2021 Affected: Front Assist radar, ACC, Travel Assist

ODIS static radar calibration required.

Rear Bumper Repair 2021 Affected: Side Assist radar, PDC

ODIS radar coding and calibration.

Any Collision 2021 Affected: ACU, all ADAS modules

Full module scan, SRS data, ADAS recalibration.

Windshield Replacement 2022 Affected: Lane Assist camera (EyeQ4), Front Assist camera, Travel Assist

ODIS static camera calibration. EyeQ4 target specifications apply for 2022+ - confirm current workshop manual revision. OEM-equivalent windshield required. Allow full adhesive cure.

Front Bumper Repair or Replacement 2022 Affected: Front Assist radar (ARS4-B), ACC, AEB, Travel Assist, Emergency Assist

ODIS static radar alignment required. Curb weight, level surface. ARS4-B bracket tolerance is tight - inspect for deformation before calibration attempt.

Rear Bumper Repair or Replacement 2022 Affected: Side Assist radar, Rear Traffic Alert, PDC rear sensors

ODIS calibration for both rear radar modules. PDC sensor count re-coding.

Area View Camera Replacement (SEL Premium) 2022 Affected: Area View 360 - all 4 cameras

All 4 Area View cameras must be calibrated via ODIS simultaneously. Single camera failure blocks Area View system operation.

Any Collision 2022 Affected: J234 ACU, deployed sensors, all ADAS in collision zone

Full ODIS scan. SRS crash data - clear or replace J234. Recalibrate all ADAS modules in collision zone.

Any Module Replacement 2022 Affected: J623, J519, J533, J217

Online module coding required via our ODIS diagnostic system. Immo5 component protection clearance for ECM and BCM. MIB3 gateway requires DA-suffix SVM channel.

Windshield Replacement 2023 Affected: Lane Assist camera, Front Assist camera, Travel Assist

ODIS static EyeQ4 camera calibration. OEM-equivalent windshield. Full adhesive cure before calibration.

Front Bumper Repair 2023 Affected: Front Assist radar, ACC, AEB, Travel Assist, Emergency Assist

ODIS static radar calibration. Curb weight, level surface. Inspect ARS4-B bracket.

Rear Bumper Repair 2023 Affected: Side Assist, Rear Traffic Alert, PDC

ODIS rear radar calibration and PDC sensor coding.

Any Collision 2023 Affected: J234 ACU, deployed sensors, all ADAS in collision zone

Full ODIS scan. SRS crash data - clear or replace. All ADAS recalibrated.

Any Module Replacement 2023 Affected: J623, J519, J533, J217

Online module coding required via our ODIS diagnostic system. Immo5 clearance for ECM and BCM.

Windshield Replacement 2024-2026 Affected: Travel Assist camera (EyeQ4H), Front Assist camera, IQ.LIGHT camera input

CA2-specific ODIS static camera calibration. EyeQ4H target specs differ from CA1 EyeQ4 - use 2024 Atlas workshop manual revision. OEM-equivalent windshield required. Full adhesive cure.

Front Bumper Repair or Replacement 2024-2026 Affected: Front Assist radar (ARS540), ACC, AEB, Travel Assist

CA2 ODIS static radar calibration with CA2-specific target procedure. ARS540 bracket position differs from CA1 - confirm correct target placement per 2024 workshop manual.

Rear Bumper Repair or Replacement 2024-2026 Affected: Side Assist radar, Rear Traffic Alert

CA2 rear radar ODIS calibration. CA2-specific sensor locations.

Headlamp Assembly Replacement 2024-2026 Affected: IQ.LIGHT Matrix LED

IQ.LIGHT standard all 2024 CA2 trims. ODIS headlamp leveling and IQ.LIGHT coding required after any headlamp assembly replacement.

Any Collision 2024-2026 Affected: CA2 J234 ACU, CA2 ADAS modules, deployed sensors

Full ODIS CA2 scan. SRS crash data - clear or replace CA2 J234. All CA2 ADAS modules in collision zone recalibrated.

Any Module Replacement 2024-2026 Affected: CA2 J623, J519, J533, J217, ABS

Online module coding required via our ODIS diagnostic system. CA2-specific 3QF-prefix parts only. Immo5 component protection clearance for ECM and BCM.

14 gateway, immobilizer, and security items documented across the 2018-2026 generation.

ARCHITECTURE & CONNECTIVITY

Architecture & Connectivity

Body Construction: High-strength steel unibody
OBD Protocol: ISO 15765-4 CAN (11-bit / 500kbps)
CAN Architecture: HS-CAN (Powertrain), Comfort CAN, Extended CAN, LIN (sensors/switches), MOST (audio on SEL)
Infotainment: MIB2 (Discover Media standard; Discover Pro optional SEL)
OTA Capable: No
ECU/TCM Unlocking: Contact us
ECU/TCM Flashing: Available
Reviewed coverage: 2018, 2024 - 2.0 TFSI (US), 2.0 TFSI EU6, 2.0 TSI, 2.0 TSI 4 motion, 3.6 V6 FSI EU6, 530 V6.
Confirm the exact engine, ECU, and any prerequisite access method before service.
Confirmation is limited to reviewed year/engine rows; other variants require confirmation.

WHAT WE RESOLVE

1st Gen (2018-2026) common module and ADAS issues

ADAS calibration drift Watch for calibration needs after windshield, bumper, suspension, camera, or radar work. Documented systems include Front Assist (Forward Collision Warning + AEB) (2018), Blind Spot Monitor (Side Assist) (2018), Rear Traffic Alert (Cross Traffic Alert) (2018), and Lane Assist (Lane Keep Assist) (2018). Year-marked systems apply only to the shown range.
SRS crash-data and warning light SRS service can involve Airbag Control Unit (ACU) (2018-2019), Airbag Control Unit (ACU) (2018-2025), and Airbag Control Unit (ACU) (2020-2025). Part numbers and crash-data workflow are confirmed for the exact year/VIN.
Replacement module setup ECU/PCM replacement programming, BCM configuration, TCU/TCM cloning, ABS/EBCM setup are represented in the merged generation data. Rows with year ranges do not apply to every model year; verify by VIN.

FREQUENTLY ASKED QUESTIONS

FAQ

Can you program Volkswagen Atlas (2018-2026) modules?

Yes. Core Auto Logic supports generation-scoped module programming for the Volkswagen Atlas (2018-2026). The merged generation data includes ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS coverage. Rows marked with a year range apply only to that part of the span; unmarked rows are present across the merged generation data.

Which modules are documented for Volkswagen Atlas (2018-2026)?

The Volkswagen Atlas (2018-2026) generation currently shows 151 core module records across ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS groups. SRS modules include Airbag Control Unit (ACU) (2018-2019), Airbag Control Unit (ACU) (2018-2025), and Airbag Control Unit (ACU) (2020-2025). Part numbers and module variants must be confirmed for your exact year/VIN. Reference part number: 5Q0 959 655 AA (2018-2019) - confirm for your exact year/VIN.

Does Volkswagen Atlas (2018-2026) need ADAS calibration after glass or collision work?

The merged generation data documents 36 ADAS systems, including Front Assist (Forward Collision Warning + AEB) (2018), Blind Spot Monitor (Side Assist) (2018), Rear Traffic Alert (Cross Traffic Alert) (2018), Lane Assist (Lane Keep Assist) (2018), and Adaptive Cruise Control (ACC) (2018). Calibration triggers include Windshield Replacement (2018), Front Bumper Repair or Replacement (2018), Rear Bumper Repair or Replacement (2018), and Any Collision (2018). Procedure type is VIN-specific scan-tool procedure; verify exact requirements by VIN before setup.

Can you reset the airbag module on Volkswagen Atlas (2018-2026)?

Yes. The generation data includes 101 SRS records, including Airbag Control Unit (ACU) (2018-2019), Airbag Control Unit (ACU) (2018-2025), and Airbag Control Unit (ACU) (2020-2025). Bench reset, cloning, and replacement setup are handled after part-number review. Any SRS part number shown for this generation is planning data only - confirm for your exact year/VIN. Reference part number: 5Q0 959 655 AA (2018-2019) - confirm for your exact year/VIN.

Do all Volkswagen Atlas (2018-2026) years use the same parts?

No assumption should be made across the full span. The generation page merges rows across 2018-2026; any row that does not span all data-bearing years is printed with its year range or treated as varies by year - verify by VIN. Part numbers always require exact year/VIN confirmation before ordering, cloning, or programming.

How long does service take for Volkswagen Atlas (2018-2026)?

Most programming, cloning, SRS, and calibration jobs are quoted after VIN, DTC, part number, and repair-scope review. Labor time varies by year - verify by VIN before scheduling. Mail-in module service is available nationwide. Exact service eligibility is confirmed from the year, VIN, module, and requested scope.

Is Volkswagen Atlas (2018-2026) service mobile or mail-in?

Mobile service covers DFW on-vehicle diagnostics, post-repair coding, and supported module work. Mail-in module service is available nationwide. We confirm the active path for your exact year, VIN, module, and requested scope before service.

OTHER GENERATIONS

More Atlas generations

1st Gen 2018-2026 You are here

(945) 382-4065 Get a Quote

Finish the repair

Need help finishing this repair?

Get onsite help in Dallas-Fort Worth. Ask about same-day availability or a one-time remote session for eligible non-VSP work.

ODIS-S Explore one-time factory coding and programming. We confirm the software and procedure for your vehicle. Module programming & recovery Replacing a module or dealing with a failed programming attempt? Send the part numbers and fault scan for review. Onsite tools & equipment Bring in a technician or ask about hourly, daily and weekly rentals where licensing and equipment availability allow.

Request programming for this vehicle Need TCM / transmission programming?