Electronic systems coverage
This 2008 Toyota Highlander page does not list sensor-system records yet; module, security, and programming support is confirmed by VIN before service.
View systems 3,200+ Vehicles Supported
1-Year Unlimited Guarantee
DFW Mobile Service
DFW Serving Dallas / Fort Worth
No ADAS systems detected on this vehicle. Want to switch to Onsite Diagnostics? Most non-ADAS issues are diagnosed and resolved in a single visit.
2008 Toyota Highlander Supported Services
2008 Toyota Highlander
ADAS calibration, module programming, and security relearns
Full ADAS calibration, module programming, and key security work for the 2008 Toyota Highlander. Mobile service is available in the Dallas/Fort Worth service area; mail-in is temporarily unavailable.
Technical snapshot
- Platform XU40 (2nd Gen, 2008-2013)
- CAN Architecture HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
- Security Toyota G-Chip (Texas Instruments 80-bit TI transponder, 1999-2009); encrypted rolling code; no OBD PIN extraction; AKL requires TIS dealer authorization + PIN code via techstream
OVERVIEW
Expert ADAS calibration, module programming, and diagnostic recovery for the 2008 Toyota Highlander. On this vehicle we cover documented systems include Rear View Camera, this XU40 (2nd Gen, 2008-2013) platform vehicle, Toyota Smart Key / Transponder immobilizer support. Mobile across the DFW Metroplex; mail-in module work is temporarily unavailable.
Platform
XU40 (2nd Gen, 2008-2013)
Production
2008-present
Trim Levels
-
Drivetrain
FWD / AWD
Engine
-
CAN Speed
HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
Exact-year service summary for 2008 Toyota Highlander
Programmable modules
This page indexes 22 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and SAS coverage.
View modulesGateway and security
This page includes 3 gateway, immobilizer, or key-security records for this 2008 Toyota Highlander.
View securityCore Auto Logic capability
Core Auto Logic supports exact-year diagnostics, module programming, and security-access planning for the 2008 Toyota Highlander using the documented module data on this page.
Choose a sectionWhat changes on this exact year
Feature availability
Immobilizer: Toyota Smart Key / Transponder - Standard; Platform: XU40 (2nd Gen, 2008-2013) - Confirmed
Driver-assist suite
No ADAS suite - pre-TSS generation. Rear camera only where equipped.
Infotainment context
Toyota AM/FM stereo; CD player; Bluetooth (select trims); Aux input
Network and access
CAN: HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
Tool access for this exact year
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
Factory scan, coding, and calibration access
Toyota Techstream / Toyota GTS+
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
OEM subscription required
Make-level OEM tool map plus exact-year gateway and ADAS fields.
ADAS scan, setup, and verification
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Tool subscription required
Service-level scanner-vendor source packet plus exact-year ADAS records.
Bench cloning and chip-level recovery
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Bench programmer source packet plus exact-year module/security records.
Choose a section to view data
SUPPORTED SYSTEMS
What we service on this vehicle
Documented module coverage for the 2008 Toyota Highlander. Counts reflect modules our techs have programmed or calibrated on this exact platform.
Engine / ECU Programming
3 modules documented
Powertrain reprogramming, calibration updates, replacement ECU configuration and security access.
Open Modules tabBCM / Body Programming
1 module documented
Body control module, gateway and accessory programming. Includes feature-bit reconfiguration.
Open Modules tabTCU / Transmission
2 modules documented
Transmission control module reprogramming, adaptive learning reset and replacement TCM clone.
Open Modules tabSRS / Airbag Reset
7 modules documented
Crash-data clear, hard-code reset and replacement airbag module configuration.
Open Modules tabABS / Brake Module
3 modules documented
ABS / EBCM bleed support, replacement module coding and yaw-rate sensor calibration.
Open Modules tabKey Security & Immobilizer
1 module documented
Immobilizer modules, key/fob types, add-key + all-keys-lost (AKL) capability and security overview.
Open Security tabIPC, SAS & Other Modules
2 modules documented
Instrument cluster cloning, steering angle sensor calibration and other supporting modules.
Open Modules tabConnectivity & Accessories
4 modules documented
Infotainment radio, surround view, remote start, trailer brake controller and other equipped systems.
Open Modules tabNeed something not listed? Most undocumented modules can still be programmed.
Feature availability 2
Immobilizer: Toyota Smart Key / Transponder
StandardKey programming requires manufacturer-level tool access. Add key supported. All keys lost (AKL) supported.
Platform: XU40 (2nd Gen, 2008-2013)
ConfirmedVerify platform code matches when cross-referencing part numbers across model years.
WHAT WE RESOLVE
Common issues on this vehicle
Common Toyota Highlander issues we resolve on this platform: Rear View Camera recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - XU40 (2nd Gen, 2008-2013) platform uses HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14. Key programming and immobilizer faults - Toyota Smart Key / Transponder immobilizer; all-keys-lost supported.
ADAS CALIBRATION MATRIX
ADAS systems on this vehicle
No ADAS suite - pre-TSS generation. Rear camera only where equipped.
Scroll for part numbers and Details
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Rear View Camera | Rear Camera | Camera | None | Conditional | - |
ADAS SYSTEM
YES Supported
Identification
- System type
- Module category
- Sensor location
Part Numbers
- OEM
- Alternative
Calibration & Triggers
- Calibration type
- Programming approach
- Requires PMI
- Trigger events
Technical Notes
- Chip / MCU
- Service notes
Need this calibrated?
WHEN IS CALIBRATION REQUIRED?
Triggers for ADAS recalibration
ECM Replacement
Techstream VIN learning + IMMO registration.
Skid Control ECU Replacement
Techstream zero-point calibration (yaw sensor + steering angle).
SRS MODULES
SRS Modules
Airbag Control Module (ACM) x1
- PART
- 8917048070
- PROTOCOL
- OBD
- CLONE
- true
- NOTES
- After any airbag deployment, the ACM stores crash data (hard codes). The module must be reset or replaced before the SRS system will function. Our equipment supports hard code clearing on most makes and models without dealer involvement.
Driver Airbag Module x1
- PART
- 8917048080
- PROTOCOL
- None
- CLONE
- false
- NOTES
- Steering wheel airbag must be replaced after deployment. Clock spring (spiral cable) must also be inspected and replaced if damaged.
Passenger Airbag Module x1
- PART
- 8917048100
- PROTOCOL
- None
- CLONE
- false
- NOTES
- Dashboard passenger airbag must be replaced after deployment. Dashboard assembly typically requires removal for access.
SDM / SRS Module x3
8917048070 Under center console, floor tunnel
- PART
- 8917048070
- LOCATION
- Under center console, floor tunnel
- CHIP/MCU
- 93C76
- NOTES
- OEM part 8917048070. Also fits: 8917048071. Memory chip: 93C76. Crash data clear supported.
8917048080 Under center console, floor tunnel
- PART
- 8917048080
- LOCATION
- Under center console, floor tunnel
- CHIP/MCU
- 93C76
- NOTES
- OEM part 8917048080. Memory chip: 93C76. Crash data clear supported.
8917048100 Under center console, floor tunnel
- PART
- 8917048100
- LOCATION
- Under center console, floor tunnel
- CHIP/MCU
- 93C76
- NOTES
- OEM part 8917048100 (verify fitment via VIN). Memory chip: 93C76. Crash data clear supported.
SRS Control Unit (variant) x1
- PART
- 8917048071
- CHIP/MCU
- 93C76
ECU MODULES
ECU Modules
Engine Control Module (ECM) - 3.5L 2GR-FE V6 89661-48B70
- PART
- 89661-48B70
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- No
Engine Control Module (ECM) - 3.3L 3MZ-FE V6 (Hybrid) 89661-48B72
- PART
- 89661-48B72
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- No
Hybrid Vehicle Control ECU - 2008 Highlander Hybrid 89981-48320
- PART
- 89981-48320
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- No
BCM MODULES
BCM Modules
Body ECU (Smart Entry / Body Integration)
- NOTES
- Toyota Body ECU. Techstream registration for smart keys and door functions.
TCU / TCM TRANSMISSION MODULES
TCU / TCM Transmission Modules
TCU - U151E 5-Speed Auto 89530-48
- PART
- 89530-48
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- No
- CHIP/MCU
- Renesas SH7058
- NOTES
- Requires Toyota Techstream, ATF WS fluid, adaptive relearn 10-15 drive cycles
TCU - U151F 5-Speed Auto 89530-48
- PART
- 89530-48
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- No
- CHIP/MCU
- Renesas SH7058
- NOTES
- Requires Toyota Techstream, ATF WS fluid, adaptive relearn 10-15 drive cycles
ABS / BRAKE MODULES
ABS / Brake Modules
Skid Control ECU (ABS/VSC/TRAC)
- NOTES
- Toyota Skid Control ECU. Techstream zero-point calibration for yaw sensor after replacement.
Wheel Speed Sensor - Front (each)
- NOTES
- Replace if ABS DTC C0200/C0205 set.
Wheel Speed Sensor - Rear (each)
- NOTES
- Replace if ABS DTC C0210/C0215 set.
OTHER MODULES (IPC, SAS)
Other Modules (IPC, SAS)
Steering Angle Sensor (SAS)
- CODING
- Yes
- NOTES
- INTEGRATED (clock spring / steering column module
Steering Angle Sensor (SAS)
- CODING
- Yes
- NOTES
- cross-year extension)
CONNECTIVITY & ACCESSORIES
Connectivity & Accessories
Toyota Connected Services (OTA)
- NOTES
- OTA via Toyota Connected Services. Subscription required post-trial. Remote start, vehicle health, Safety Connect. Verify current Toyota app compatibility for 2024.
Backup Camera (VERIFY VIA TIS - 87806-0E)
- PART
- (VERIFY VIA TIS - 87806-0E)
- NOTES
- Standard all trims. Techstream ID registration if replaced. Verify image and guidelines in reverse.
Surround View Monitor (if equipped)
- NOTES
- XLE+ trims. Techstream camera system check and re-registration if replaced.
Power Rear Liftgate
- NOTES
- Techstream height limit init. Obstacle detect verify.
KEY SECURITY & IMMOBILIZER
Key Security & Immobilizer
- System Toyota Smart Key / Transponder
- Add Key Yes
- All Keys Lost Yes
Toyota G-Chip (Texas Instruments 80-bit TI transponder, 1999-2009); encrypted rolling code; no OBD PIN extraction; AKL requires TIS dealer authorization + PIN code via techstream
IMMOBILIZER MODULES
Immobilizer Modules
Smart Key ECU / Immobilizer
- NOTES
- Toyota/Lexus Smart Key ECU. Techstream key registration. G-chip (pre-2010) or H-chip (2010+). AKL requires TIS PIN.
KEY & FOB TYPES
Key & Fob Types
Toyota Smart Key (Proximity FOB)
- NOTES
- Proximity push-to-start. Techstream registration. Max 6 keys (gen-dependent).
Emergency Mechanical Key Blade
- NOTES
- Mechanical blade in smart key FOB. Cut by key code or code-cutting machine.
Replacement Notes
Toyota Smart Key / Transponder system. Techstream required for key programming and module replacement. No obd pin extraction; akl supported.
ARCHITECTURE & CONNECTIVITY
Architecture & Connectivity
- Body Construction
- TNGA-K Unibody - High-Tensile Steel with Structural Adhesive, 3-Row SUV
- OBD Protocol
- ISO 15765-4 CAN (500 kbps)
- CAN Architecture
- HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
- Infotainment
- Toyota AM/FM stereo; CD player; Bluetooth (select trims); Aux input
- OTA Capable
- No
- ECU/TCM Unlocking
- Contact us
- ECU/TCM Flashing
- Confirmed
Reviewed coverage: 2008 - 2.7L VVTi (1AR-FE).
Confirm the exact engine, ECU, and any prerequisite access method before service.
FREQUENTLY ASKED QUESTIONS
FAQ
How much does ADAS calibration cost for a 2008 Toyota Highlander?
ADAS calibration pricing for a 2008 Toyota Highlander depends on which of its 1 documented systems need work after a repair. This vehicle is documented with Rear View Camera. We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.
Can you reset the airbag light on a 2008 Toyota Highlander?
Yes. The 2008 Toyota Highlander uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: 8917048070. Mobile diagnosis and programming are the active service path. Mail-in bench intake is temporarily unavailable. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.
What is needed after replacing the windshield on a 2008 Toyota Highlander?
After windshield replacement on a 2008 Toyota Highlander, Rear View Camera rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in intake is temporarily unavailable.
How long does a 2008 Toyota Highlander module service take?
Most 2008 Toyota Highlander onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 16 programmable modules documented in our database (3 ECU, 1 BCM, 2 TCU, 3 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module intake is temporarily unavailable.
Do you cover the 2008 Toyota Highlander on-site, or is this mail-in only?
We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, key programming, IMMO pairing, post-repair recoding, and supported module work). Mail-in module intake is temporarily unavailable. Quote the work and we will confirm the active service path for the 2008 Toyota Highlander. Do not ship a module unless support confirms next steps.
What kind of warranty do you offer on 2008 Toyota Highlander programming?
Every programming, cloning, and calibration job on the 2008 Toyota Highlander is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
Can you program a 2008 Toyota Highlander with no working keys (all-keys-lost)?
Yes - all-keys-lost is supported on the 2008 Toyota Highlander. Immobilizer generation on this platform: Toyota Smart Key / Transponder. Adding a key (with a working key already in hand) is also supported - typically faster and less expensive than an all-keys-lost reset. Submit the VIN and we will confirm the procedure and quote before scheduling.
Which modules on a 2008 Toyota Highlander can you actually service?
We program, clone, repair, or replace the full programmable-module stack on a 2008 Toyota Highlander. For this vehicle our database documents:
- 3 engine control (ECU/PCM)
- 2 transmission control (TCU/TCM)
- 1 body control (BCM and related)
- 3 ABS / brake control (EBCM)
- 1 immobilizer / security
- 2 key & fob
- 2 steering angle sensor (SAS)
- 1 ADAS module
Send the VIN and the operations performed and we will confirm support and pricing.
Additional Module Part Numbers
Additional OEM-sourced part numbers for the 2008 Toyota Highlander covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.
- ECU / PCM Part Numbers
- 89661-48B70, 89661-48B72, 89981-48320
- TCU / TCM Part Numbers
- 89530-48
- SRS / Airbag Module Part Numbers
- 8917048070, 8917048080, 8917048100, 8917048071
- Transmission Control Module (TCM) Part Numbers
- 89530-48
Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.
Different trim or build?
Send your VIN and we'll confirm exact module support and pricing in the quote response.
Hit a security wall? We've got the keys.
1-year unlimited warranty on every flash and calibration.
Shared module fitment
Vehicles sharing modules with the 2008 Toyota Highlander
These vehicles use one or more of the same replacement modules indexed for this vehicle.