We provide the software and equipment for the agreed work. The exact tool and procedure depend on your year, VIN and module.
2008-2013 Toyota Highlander service guide Module Programming & Diagnostics
Choose a repair service below or find your module by part number. Onsite help is available in Dallas-Fort Worth, with mail-in module service nationwide.
What do you need fixed?
Choose a service to start your quote.
Find your module
42 documented Toyota Highlander module records across the 2008-2013 generation. Search by module name or part number, then open a result for requirements and repair options.
No matching records. Try a shorter part number or clear the filters. You can still request help if your module is not listed.
ECU / Engine
Engine Control Module (ECM) - 3.5L 2GR-FE V6 2 records
J2534
Documented for 2008 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2008
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 89661-48B70
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
J2534
Documented for 2009 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2009
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 89661-48F20
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
Engine Control Module (ECM) - 3.3L 3MZ-FE V6 (Hybrid) 2 records
J2534
Documented for 2008 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2008
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 89661-48B72
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
J2534
Documented for 2009 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2009
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 89661-48B72
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
- Notes
- 2008-2009 Highlander 89661-48B72 covers 3MZ-FE hybrid variant as well as V6/I4 non-hybrid; final service number is 89661-48F22 per Toyota parts catalog.
Hybrid Vehicle Control ECU - 2008 Highlander Hybrid Verify by VIN 2008 1 record
Documented for 2008 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2008
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 89981-48320
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
Engine Control Module (ECM) - 2.7L 1AR-FE I4 Verify by VIN 2009 1 record
Documented for 2009 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2009
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 89661-48F21
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
Hybrid Vehicle Control ECU - 2009 Highlander Hybrid Verify by VIN 2009 1 record
Documented for 2009 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2009
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 89981-48320
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
ECM - 3.5L 2GR-FE V6 / 2.7L 1AR-FE I4 (2011+) Verify by VIN 2010-2013 1 record
Documented for 2010-2013 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2010, 2011, 2012, 2013
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Notes
- Toyota Highlander ECM. Techstream VIN learning + IMMO.
TCM / Transmission
TCU - U151E 5-Speed Auto Verify by VIN 2008-2009 89530-48
Documented for 2008-2009 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2008, 2009
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 89530-48
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Renesas SH7058
- Notes
- Requires Toyota Techstream, ATF WS fluid, adaptive relearn 10-15 drive cycles
TCU - U151F 5-Speed Auto Verify by VIN 2008-2009 89530-48
Documented for 2008-2009 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2008, 2009
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 89530-48
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Renesas SH7058
- Notes
- Requires Toyota Techstream, ATF WS fluid, adaptive relearn 10-15 drive cycles
TCU - U660E 6-Speed Auto Verify by VIN 2010-2011 89530-48
Documented for 2010-2011 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2010, 2011
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 89530-48
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Renesas SH7058
- Notes
- Requires Toyota TIS Techstream for programming. ATF WS fluid spec. TCM learn procedure required after installation via OBD.
TCU - U660E 6-Speed Auto Verify by VIN 2012-2013 89530-48
Documented for 2012-2013 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2012, 2013
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 89530-48
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Renesas SH7058
- Notes
- Requires Toyota TIS Techstream for initialization, ATF WS fluid spec, throttle position relearn required after installation
BCM / Body electronics
Body ECU (Smart Entry / Body Integration) Verify by VIN
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2008, 2009, 2010, 2011, 2012, 2013
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Notes
- Toyota Body ECU. Techstream registration for smart keys and door functions.
SRS / Airbag
Airbag Control Module (ACM) Verify by VIN 2008 1 record
Documented for 2008 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2008
Donor must match part family 8917048070 - requires cloning
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 8917048070
- Protocol / method
- OBD
- Cloning supported
- Yes
- Notes
- After any airbag deployment, the ACM stores crash data (hard codes). The module must be reset or replaced before the SRS system will function. Our equipment supports hard code clearing on most makes and models without dealer involvement.
Driver Airbag Module Verify by VIN 2008 1 record
Documented for 2008 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2008
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 8917048080
- Protocol / method
- None
- Cloning supported
- No
- Notes
- Steering wheel airbag must be replaced after deployment. Clock spring (spiral cable) must also be inspected and replaced if damaged.
Passenger Airbag Module Verify by VIN 2008 1 record
Documented for 2008 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2008
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 8917048100
- Protocol / method
- None
- Cloning supported
- No
- Notes
- Dashboard passenger airbag must be replaced after deployment. Dashboard assembly typically requires removal for access.
SDM / SRS Module 2008 3 records
Under center console, floor tunnel
Documented for 2008 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2008
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 8917048070
- Location
- Under center console, floor tunnel
- Chip / MCU
- 93C76
- Notes
- OEM part 8917048070. Also fits: 8917048071. Memory chip: 93C76. Crash data clear supported.
Under center console, floor tunnel
Documented for 2008 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2008
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 8917048080
- Location
- Under center console, floor tunnel
- Chip / MCU
- 93C76
- Notes
- OEM part 8917048080. Memory chip: 93C76. Crash data clear supported.
Under center console, floor tunnel
Documented for 2008 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2008
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 8917048100
- Location
- Under center console, floor tunnel
- Chip / MCU
- 93C76
- Notes
- OEM part 8917048100 (verify fitment via VIN). Memory chip: 93C76. Crash data clear supported.
SRS Control Unit (variant) Verify by VIN 2008 1 record
Documented for 2008 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2008
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 8917048071
- Chip / MCU
- 93C76
SRS Control Unit 9 records
Under center console
Documented for 2009-2011 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2009, 2010, 2011
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 89170-48240
- Location
- Under center console
- Manufacturer
- Denso
- Notes
- Requires Techstream or J2534 for SRS reset. DTC B1650 common post-crash. Battery disconnect and 90-second wait before removal.
Under center console
Documented for 2009-2011 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2009, 2010, 2011
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 89170-48250
- Location
- Under center console
- Manufacturer
- Denso
- Notes
- Requires Techstream or J2534 for SRS reset. DTC B1650 common post-crash. Battery disconnect and 90-second wait before removal.
Under center console
Documented for 2010-2013 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2010, 2011, 2012, 2013
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 89170-48450
- Location
- Under center console
- Manufacturer
- Denso
- Notes
- Requires Techstream or J2534 for SRS reset. DTC B1650 common post-crash. Battery disconnect and 90-second wait before removal.
Under center console
Documented for 2010-2011 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2010, 2011
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 89170-0E050
- Location
- Under center console
- Manufacturer
- Denso
- Notes
- Requires Techstream or J2534 for SRS reset. DTC B1650 common post-crash. Battery disconnect and 90-second wait before removal.
Under center console
Documented for 2010-2013 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2010, 2011, 2012, 2013
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 89170-0E060
- Location
- Under center console
- Manufacturer
- Denso
- Notes
- Requires Techstream or J2534 for SRS reset. DTC B1650 common post-crash. Battery disconnect and 90-second wait before removal.
Under center console
Documented for 2012-2013 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2012, 2013
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 89170-0E150
- Location
- Under center console
- Manufacturer
- Denso
- Notes
- Requires Techstream or J2534 for SRS reset. DTC B1650 common post-crash. Battery disconnect and 90-second wait before removal.
Under center console
Documented for 2012-2013 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2012, 2013
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 89170-48830
- Location
- Under center console
- Manufacturer
- Denso
- Notes
- Requires Techstream or J2534 for SRS reset. DTC B1650 common post-crash. Battery disconnect and 90-second wait before removal.
Under center console
Documented for 2013 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2013
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 89170-48880
- Location
- Under center console
- Manufacturer
- Denso
- Notes
- Requires Techstream or J2534 for SRS reset. DTC B1650 common post-crash. Battery disconnect and 90-second wait before removal.
Under center console
Documented for 2013 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2013
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 89170-0E180
- Location
- Under center console
- Manufacturer
- Denso
- Notes
- Requires Techstream or J2534 for SRS reset. DTC B1650 common post-crash. Battery disconnect and 90-second wait before removal.
ABS / Brakes
Skid Control ECU (ABS/VSC/TRAC) Verify by VIN
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2008, 2009, 2010, 2011, 2012, 2013
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Notes
- Toyota Skid Control ECU. Techstream zero-point calibration for yaw sensor after replacement.
Wheel Speed Sensor - Front (each) Verify by VIN
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2008, 2009, 2010, 2011, 2012, 2013
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Notes
- Replace if ABS DTC C0200/C0205 set.
Wheel Speed Sensor - Rear (each) Verify by VIN
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2008, 2009, 2010, 2011, 2012, 2013
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Notes
- Replace if ABS DTC C0210/C0215 set.
Other modules
Instrument Panel Cluster (IPC) Verify by VIN 2010 83800-48K30
Documented for 2010 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2010
Donor must match part family 83800-48K30 - requires cloning
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 83800-48K30
- Cloning supported
- Yes
- Notes
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Instrument Panel Cluster (IPC) Verify by VIN 2011 83800-48L40
Documented for 2011 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2011
Donor must match part family 83800-48L40 - requires cloning
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 83800-48L40
- Cloning supported
- Yes
- Notes
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Instrument Panel Cluster (IPC) Verify by VIN 2012 83800-48M20
Documented for 2012 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2012
Donor must match part family 83800-48M20 - requires cloning
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 83800-48M20
- Cloning supported
- Yes
- Notes
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Instrument Panel Cluster (IPC) Verify by VIN 2013 83800-48N10
Documented for 2013 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2013
Donor must match part family 83800-48N10 - requires cloning
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 83800-48N10
- Cloning supported
- Yes
- Notes
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Steering Angle Sensor (SAS) Verify by VIN
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2008, 2009, 2010, 2011, 2012, 2013
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Coding required
- Yes
- Notes
- INTEGRATED (clock spring / steering column module
Steering Angle Sensor (SAS) Verify by VIN
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2008, 2009, 2010, 2011, 2012, 2013
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Coding required
- Yes
- Notes
- cross-year extension)
Connectivity / Accessories
Toyota Connected Services (OTA) Verify by VIN
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2008, 2009, 2010, 2011, 2012, 2013
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Notes
- OTA via Toyota Connected Services. Subscription required post-trial. Remote start, vehicle health, Safety Connect. Verify current Toyota app compatibility for 2024.
Backup Camera Verify by VIN (VERIFY VIA TIS - 87806-0E)
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2008, 2009, 2010, 2011, 2012, 2013
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- (VERIFY VIA TIS - 87806-0E)
- Notes
- Standard all trims. Techstream ID registration if replaced. Verify image and guidelines in reverse.
Surround View Monitor (if equipped) Verify by VIN
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2008, 2009, 2010, 2011, 2012, 2013
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Notes
- XLE+ trims. Techstream camera system check and re-registration if replaced.
Power Rear Liftgate Verify by VIN
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2008, 2009, 2010, 2011, 2012, 2013
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Notes
- Techstream height limit init. Obstacle detect verify.
Reference information for 2008-2013. Coverage can vary by year and equipment. Confirm the VIN and full part number before ordering a replacement.
Vehicle overview
- Vehicle
- Toyota Highlander
- Model years
- 2008-2013
- Generation
- 2nd Gen XU40
- Platform
- XU40
Tools we use for this vehicle
Factory scan, coding, and calibration access
Toyota Techstream / Toyota GTS+
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
ADAS scan, setup, and verification
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Bench cloning and chip-level recovery
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Tool requirements
Basic OBD2 scanner
View capabilities and limitations
Supported work
- Read codes on SRS systems (16 documented rows)
- Read codes on ECU systems (8 documented rows)
- Read codes on BCM systems (1 documented row)
- Read codes on TCU / TCM systems (4 documented rows)
- Read codes on ABS systems (3 documented rows)
- Read codes on IPC / SAS systems (6 documented rows)
- Read codes on Keys systems (2 documented rows)
- Read codes on Immobilizer systems (1 documented row)
- Read codes on Accessory systems (4 documented rows)
Limitations
- Immobilizer programming, coding, cloning, or security work (1 documented row)
Factory programming software (J2534)
View capabilities and limitations
Supported work
- Factory scan, coding, and calibration access: Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
Bench programmer
View capabilities and limitations
Supported work
- Immobilizer bench clone rows (1 documented row)
Know this platform
This platform uses HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14 with ISO 15765-4 CAN (500 kbps).
- CAN
- HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
- OBD
- ISO 15765-4 CAN (500 kbps)
Generation service summary for Toyota Highlander 2nd Gen XU40 (2008-2013)
Generation coverage
This page consolidates Toyota Highlander service data for 2008-2013 across 6 model years; service information is available for 6 years.
Choose a yearProgrammable modules
The merged generation page indexes 42 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, IPC coverage. Part numbers are confirmed for the exact year/VIN.
View modulesCore Auto Logic capability
Core Auto Logic supports generation-level diagnostics, module programming, and SRS reset for the Toyota Highlander 2008-2013 span, with exact-year validation before service. Mail-in module service is available nationwide.
Get a quoteYear-by-year details
| Year | VIN split | Trim notes |
|---|---|---|
| 2008 | ||
| 2009 | VIN pos 4-8 identifies model/body/engine. Toyota WMI: 2T1 (Camry), 4T1 (Corolla/RAV4), 5TD (Highlander). Position 7 = engine. Position 10 = model year code. | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. |
| 2010 | VIN pos 4-8 identifies model/body/engine. Toyota WMI: 2T1 (Camry), 4T1 (Corolla/RAV4), 5TD (Highlander). Position 7 = engine. Position 10 = model year code. | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. |
| 2011 | VIN pos 4-8 identifies model/body/engine. Toyota WMI: 2T1 (Camry), 4T1 (Corolla/RAV4), 5TD (Highlander). Position 7 = engine. Position 10 = model year code. | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. |
| 2012 | VIN pos 4-8 identifies model/body/engine. Toyota WMI: 2T1 (Camry), 4T1 (Corolla/RAV4), 5TD (Highlander). Position 7 = engine. Position 10 = model year code. | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. |
| 2013 | VIN pos 4-8 identifies model/body/engine. Toyota WMI: 2T1 (Camry), 4T1 (Corolla/RAV4), 5TD (Highlander). Position 7 = engine. Position 10 = model year code. | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. |
3 gateway, immobilizer, and security items documented across the 2008-2013 generation.
Architecture & Connectivity
- Body Construction
- TNGA-K Unibody - High-Tensile Steel with Structural Adhesive, 3-Row SUV
- OBD Protocol
- ISO 15765-4 CAN (500 kbps)
- CAN Architecture
- HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
- Infotainment
- Toyota Entune (6.1" or 7" touchscreen); Bluetooth; USB/Aux; navigation available on higher trims
- OTA Capable
- No
- ECU/TCM Unlocking
- Contact us
- ECU/TCM Flashing
- Available
Reviewed coverage: 2008-2013 - 2.7L VVTi (1AR-FE).
Confirm the exact engine, ECU, and any prerequisite access method before service.
Confirmation is limited to reviewed year/engine rows; other variants require confirmation.
2nd Gen XU40 (2008-2013) common module and security issues
- SRS crash-data and warning light SRS service can involve Airbag Control Module (ACM) (2008), Driver Airbag Module (2008), and Passenger Airbag Module (2008). Part numbers and crash-data workflow are confirmed for the exact year/VIN.
- Replacement module setup ECU/PCM replacement programming, BCM configuration, TCU/TCM cloning, ABS/EBCM setup are represented in the merged generation data. Rows with year ranges do not apply to every model year; verify by VIN.
FAQ
Can you program Toyota Highlander (2008-2013) modules?
Yes. Core Auto Logic supports generation-scoped module programming for the Toyota Highlander (2008-2013). The merged generation data includes ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS coverage. Rows marked with a year range apply only to that part of the span; unmarked rows are present across the merged generation data.
Which modules are documented for Toyota Highlander (2008-2013)?
The Toyota Highlander (2008-2013) generation currently shows 32 core module records across ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS groups. SRS modules include Airbag Control Module (ACM) (2008), Driver Airbag Module (2008), and Passenger Airbag Module (2008). Part numbers and module variants must be confirmed for your exact year/VIN. Reference part number: 8917048070 (2008) - confirm for your exact year/VIN.
Can you reset the airbag module on Toyota Highlander (2008-2013)?
Yes. The generation data includes 16 SRS records, including Airbag Control Module (ACM) (2008), Driver Airbag Module (2008), and Passenger Airbag Module (2008). Bench reset, cloning, and replacement setup are handled after part-number review. Any SRS part number shown for this generation is planning data only - confirm for your exact year/VIN. Reference part number: 8917048070 (2008) - confirm for your exact year/VIN.
Do all Toyota Highlander (2008-2013) years use the same parts?
No assumption should be made across the full span. The generation page merges rows across 2008-2013; any row that does not span all data-bearing years is printed with its year range or treated as varies by year - verify by VIN. Part numbers always require exact year/VIN confirmation before ordering, cloning, or programming.
How long does service take for Toyota Highlander (2008-2013)?
Most programming, cloning, and SRS jobs are quoted after VIN, DTC, part number, and repair-scope review. Service time varies by module type, condition, security access, and the active mobile service path. Mail-in module service is available nationwide. Exact service eligibility is confirmed from the year, VIN, module, and requested scope.
Is Toyota Highlander (2008-2013) service mobile or mail-in?
Mobile service covers DFW on-vehicle diagnostics, post-repair coding, and supported module work. Mail-in module service is available nationwide. We confirm the active path for your exact year, VIN, module, and requested scope before service.
More Highlander generations
Need help finishing this repair?
Get onsite help in Dallas-Fort Worth. Ask about same-day availability or a one-time remote session for eligible non-VSP work.