VIN / Build Split
VIN pos 4-8 identifies model/body/engine. Toyota WMI: 2T1 (Camry), 4T1 (Corolla/RAV4), 5TD (Highlander). Position 7 = engine. Position 10 = model year code.
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
DFW Mobile Service
DFW Serving Dallas / Fort Worth
2011 Toyota Camry Supported Services
2011 Toyota Camry
ADAS calibration, module programming, and security relearns
Trims: LE, SE, XLE, XSE, TRD. TSS standard all trims. XLE+ adds BSM and RCTW.
Technical snapshot
- Platform XV40 (8th Gen, 2007-2011)
- CAN Architecture HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
- Security Toyota H-Chip (Texas Instruments DST-AES 128-bit transponder, 2010+); rolling code immobilizer; no OBD PIN extraction; AKL requires TIS dealer authorization + PIN code + registration via techstream
OVERVIEW
Expert ADAS calibration, module programming, and diagnostic recovery for the 2011 Toyota Camry. On this vehicle we cover documented systems include Rear View Camera, this XV40 (8th Gen, 2007-2011) platform vehicle, Toyota Smart Key / Transponder immobilizer support. Mobile across the DFW Metroplex; mail-in module work is temporarily unavailable.
Platform
XV40 (8th Gen, 2007-2011)
Production
2007-present
Trim Levels
Trims: LE, SE, XLE, XSE, TRD. TSS standard all trims. XLE+ adds BSM and RCTW.
Drivetrain
FWD / AWD
Engine
-
CAN Speed
HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
YEAR-SPECIFIC NOTES
Exact-year service summary for 2011 Toyota Camry
Electronic systems coverage
This 2011 Toyota Camry page does not list sensor-system records yet; module, security, and programming support is confirmed by VIN before service.
View systemsProgrammable modules
This page indexes 21 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and IPC coverage.
View modulesGateway and security
This page includes 3 gateway, immobilizer, or key-security records for this 2011 Toyota Camry.
View securityCore Auto Logic capability
Core Auto Logic supports exact-year diagnostics, module programming, and security-access planning for the 2011 Toyota Camry using the documented module data on this page.
Choose a sectionWhat changes on this exact year
Feature availability
Immobilizer: Toyota Smart Key / Transponder - Standard; Platform: XV40 (8th Gen, 2007-2011) - Confirmed
Driver-assist suite
No ADAS suite - pre-TSS generation. Rear camera only where equipped.
VIN and build split
VIN pos 4-8 identifies model/body/engine. Toyota WMI: 2T1 (Camry), 4T1 (Corolla/RAV4), 5TD (Highlander). Position 7 = engine. Position 10 = model year code.
Infotainment context
Toyota Entune (6.1" or 7" touchscreen); Bluetooth; USB/Aux; navigation available on higher trims
Network and access
CAN: HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
Tool access for this exact year
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
Factory scan, coding, and calibration access
Toyota Techstream / Toyota GTS+
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
OEM subscription required
Make-level OEM tool map plus exact-year gateway and ADAS fields.
ADAS scan, setup, and verification
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Tool subscription required
Service-level scanner-vendor source packet plus exact-year ADAS records.
Bench cloning and chip-level recovery
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Bench programmer source packet plus exact-year module/security records.
Choose a section to view data
SUPPORTED SYSTEMS
What we service on this vehicle
Documented module coverage for the 2011 Toyota Camry. Counts reflect modules our techs have programmed or calibrated on this exact platform.
Engine / ECU Programming
1 module documented
Powertrain reprogramming, calibration updates, replacement ECU configuration and security access.
Open Modules tabBCM / Body Programming
1 module documented
Body control module, gateway and accessory programming. Includes feature-bit reconfiguration.
Open Modules tabTCU / Transmission
2 modules documented
Transmission control module reprogramming, adaptive learning reset and replacement TCM clone.
Open Modules tabSRS / Airbag Reset
9 modules documented
Crash-data clear, hard-code reset and replacement airbag module configuration.
Open Modules tabABS / Brake Module
3 modules documented
ABS / EBCM bleed support, replacement module coding and yaw-rate sensor calibration.
Open Modules tabKey Security & Immobilizer
1 module documented
Immobilizer modules, key/fob types, add-key + all-keys-lost (AKL) capability and security overview.
Open Security tabIPC, SAS & Other Modules
3 modules documented
Instrument cluster cloning, steering angle sensor calibration and other supporting modules.
Open Modules tabConnectivity & Accessories
2 modules documented
Infotainment radio, surround view, remote start, trailer brake controller and other equipped systems.
Open Modules tabNeed something not listed? Most undocumented modules can still be programmed.
Feature availability 2
Immobilizer: Toyota Smart Key / Transponder
StandardKey programming requires manufacturer-level tool access. Add key supported. All keys lost (AKL) supported.
Platform: XV40 (8th Gen, 2007-2011)
ConfirmedVerify platform code matches when cross-referencing part numbers across model years.
WHAT WE RESOLVE
Common issues on this vehicle
Common Toyota Camry issues we resolve on this platform: Rear View Camera recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - XV40 (8th Gen, 2007-2011) platform uses HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14. Key programming and immobilizer faults - Toyota Smart Key / Transponder immobilizer; all-keys-lost supported.
ADAS CALIBRATION MATRIX
ADAS systems on this vehicle
No ADAS suite - pre-TSS generation. Rear camera only where equipped.
Scroll for part numbers and Details
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Rear View Camera | Rear Camera | Camera | None | YES | - |
ADAS SYSTEM
YES Supported
Identification
- System type
- Module category
- Sensor location
Part Numbers
- OEM
- Alternative
Calibration & Triggers
- Calibration type
- Programming approach
- Requires PMI
- Trigger events
Technical Notes
- Chip / MCU
- Service notes
Need this calibrated?
WHEN IS CALIBRATION REQUIRED?
Triggers for ADAS recalibration
ECM Replacement
Techstream VIN learning + IMMO registration.
Skid Control ECU Replacement
Techstream zero-point calibration (yaw sensor + steering angle).
SRS MODULES
SRS Modules
SRS Control Unit x9
89170-33491 Under center console
- PART
- 89170-33491
- LOCATION
- Under center console
- MFG
- Denso
- NOTES
- Requires Techstream or J2534 for SRS reset. DTC B1650 common post-crash. Battery disconnect and 90-second wait before removal.
89170-06201 Under center console
- PART
- 89170-06201
- LOCATION
- Under center console
- MFG
- Denso
- NOTES
- Requires Techstream or J2534 for SRS reset. DTC B1650 common post-crash. Battery disconnect and 90-second wait before removal.
89170-06380 Under center console
- PART
- 89170-06380
- LOCATION
- Under center console
- MFG
- Denso
- NOTES
- Requires Techstream or J2534 for SRS reset. DTC B1650 common post-crash. Battery disconnect and 90-second wait before removal.
89170-33491 Under center console
- PART
- 89170-33491
- LOCATION
- Under center console
- MFG
- Denso
- NOTES
- Requires Techstream or J2534 for SRS reset. DTC B1650 common post-crash. Battery disconnect and 90-second wait before removal.
89170-06201 Under center console
- PART
- 89170-06201
- LOCATION
- Under center console
- MFG
- Denso
- NOTES
- Requires Techstream or J2534 for SRS reset. DTC B1650 common post-crash. Battery disconnect and 90-second wait before removal.
89170-06380 Under center console
- PART
- 89170-06380
- LOCATION
- Under center console
- MFG
- Denso
- NOTES
- Requires Techstream or J2534 for SRS reset. DTC B1650 common post-crash. Battery disconnect and 90-second wait before removal.
89170-33491 Under center console
- PART
- 89170-33491
- LOCATION
- Under center console
- MFG
- Denso
- NOTES
- Requires Techstream or J2534 for SRS reset. DTC B1650 common post-crash. Battery disconnect and 90-second wait before removal.
89170-06201 Under center console
- PART
- 89170-06201
- LOCATION
- Under center console
- MFG
- Denso
- NOTES
- Requires Techstream or J2534 for SRS reset. DTC B1650 common post-crash. Battery disconnect and 90-second wait before removal.
89170-06380 Under center console
- PART
- 89170-06380
- LOCATION
- Under center console
- MFG
- Denso
- NOTES
- Requires Techstream or J2534 for SRS reset. DTC B1650 common post-crash. Battery disconnect and 90-second wait before removal.
ECU MODULES
ECU Modules
ECM - 2.5L 2AR-FE / 3.5L 2GR-FE
- NOTES
- Toyota Camry ECM. Techstream VIN learning + immobilizer registration.
BCM MODULES
BCM Modules
Body ECU (Smart Entry / Body Integration)
- NOTES
- Toyota Body ECU. Techstream registration for smart keys and door functions.
TCU / TCM TRANSMISSION MODULES
TCU / TCM Transmission Modules
TCU - U660E 6-Speed Auto 89530-33
- PART
- 89530-33
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- Yes
- CHIP/MCU
- Renesas SH7058
- NOTES
- Requires Toyota TIS Techstream for initialization, ATF WS specification, shift relearn procedure after programming
TCU - U760E 6-Speed Auto 89530-06
- PART
- 89530-06
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- Yes
- CHIP/MCU
- Renesas SH7058
- NOTES
- V6 engine variant, requires Toyota TIS Techstream for VIN coding, ATF WS specification, adaptive learning reset required
ABS / BRAKE MODULES
ABS / Brake Modules
Skid Control ECU (ABS/VSC/TRAC)
- NOTES
- Toyota Skid Control ECU. Techstream zero-point calibration for yaw sensor after replacement.
Wheel Speed Sensor - Front (each)
- NOTES
- Replace if ABS DTC C0200/C0205 set.
Wheel Speed Sensor - Rear (each)
- NOTES
- Replace if ABS DTC C0210/C0215 set.
OTHER MODULES (IPC, SAS)
Other Modules (IPC, SAS)
Instrument Panel Cluster (IPC) 83800-06M40
- PART
- 83800-06M40
- CLONE
- Yes
- NOTES
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Steering Angle Sensor (SAS)
- CODING
- Yes
- NOTES
- INTEGRATED (clock spring / steering column module
Steering Angle Sensor (SAS)
- CODING
- Yes
- NOTES
- cross-year extension)
CONNECTIVITY & ACCESSORIES
Connectivity & Accessories
Backup Camera 87806-06 (VERIFY VIA TIS)
- PART
- 87806-06 (VERIFY VIA TIS)
- NOTES
- Standard. Techstream registration if replaced.
Toyota Remote Connect
- NOTES
- Subscription-based. Final XV70 gen - subscription transfer on vehicle sale.
KEY SECURITY & IMMOBILIZER
Key Security & Immobilizer
- System Toyota Smart Key / Transponder
- Add Key Yes
- All Keys Lost Yes
Toyota H-Chip (Texas Instruments DST-AES 128-bit transponder, 2010+); rolling code immobilizer; no OBD PIN extraction; AKL requires TIS dealer authorization + PIN code + registration via techstream
IMMOBILIZER MODULES
Immobilizer Modules
Smart Key ECU / Immobilizer
- NOTES
- Toyota/Lexus Smart Key ECU. Techstream key registration. G-chip (pre-2010) or H-chip (2010+). AKL requires TIS PIN.
KEY & FOB TYPES
Key & Fob Types
Toyota Smart Key (Proximity FOB)
- NOTES
- Proximity push-to-start. Techstream registration. Max 6 keys (gen-dependent).
Emergency Mechanical Key Blade
- NOTES
- Mechanical blade in smart key FOB. Cut by key code or code-cutting machine.
Replacement Notes
Toyota Smart Key / Transponder system. Techstream required for key programming and module replacement. No obd pin extraction; akl supported.
ARCHITECTURE & CONNECTIVITY
Architecture & Connectivity
- Body Construction
- TNGA-K Unibody - High-Tensile Steel with Structural Adhesive
- OBD Protocol
- ISO 15765-4 CAN (500 kbps)
- CAN Architecture
- HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
- Infotainment
- Toyota Entune (6.1" or 7" touchscreen); Bluetooth; USB/Aux; navigation available on higher trims
- OTA Capable
- No
- ECU/TCM Unlocking
- Contact us
- ECU/TCM Flashing
- Confirmed
Reviewed coverage: 2011 - 2.0, 2.4L (2AZFE), 2.4L 16v (2AZFE), 2.4L 4WD (2AZFE), 2.4L VVT-i (2AZ-FE), 2.5, 2.5 Hybrid, 3.5i V6.
Confirm the exact engine, ECU, and any prerequisite access method before service.
FREQUENTLY ASKED QUESTIONS
FAQ
How much does ADAS calibration cost for a 2011 Toyota Camry?
ADAS calibration pricing for a 2011 Toyota Camry depends on which of its 1 documented systems need work after a repair. This vehicle is documented with Rear View Camera. We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.
Can you reset the airbag light on a 2011 Toyota Camry?
Yes. The 2011 Toyota Camry uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: 89170-33491. Mobile diagnosis and programming are the active service path. Mail-in bench intake is temporarily unavailable. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.
What is needed after replacing the windshield on a 2011 Toyota Camry?
After windshield replacement on a 2011 Toyota Camry, Rear View Camera rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in intake is temporarily unavailable.
How long does a 2011 Toyota Camry module service take?
Most 2011 Toyota Camry onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 13 programmable modules documented in our database (1 ECU, 1 BCM, 2 TCU, 3 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module intake is temporarily unavailable.
Do you cover the 2011 Toyota Camry on-site, or is this mail-in only?
We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, key programming, IMMO pairing, post-repair recoding, and supported module work). Mail-in module intake is temporarily unavailable. Quote the work and we will confirm the active service path for the 2011 Toyota Camry. Do not ship a module unless support confirms next steps.
What kind of warranty do you offer on 2011 Toyota Camry programming?
Every programming, cloning, and calibration job on the 2011 Toyota Camry is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
Can you program a 2011 Toyota Camry with no working keys (all-keys-lost)?
Yes - all-keys-lost is supported on the 2011 Toyota Camry. Immobilizer generation on this platform: Toyota Smart Key / Transponder. Adding a key (with a working key already in hand) is also supported - typically faster and less expensive than an all-keys-lost reset. Submit the VIN and we will confirm the procedure and quote before scheduling.
Which modules on a 2011 Toyota Camry can you actually service?
We program, clone, repair, or replace the full programmable-module stack on a 2011 Toyota Camry. For this vehicle our database documents:
- 1 engine control (ECU/PCM)
- 2 transmission control (TCU/TCM)
- 1 body control (BCM and related)
- 3 ABS / brake control (EBCM)
- 1 immobilizer / security
- 2 key & fob
- 1 instrument cluster (IPC)
- 2 steering angle sensor (SAS)
- 1 ADAS module
Send the VIN and the operations performed and we will confirm support and pricing.
Additional Module Part Numbers
Additional OEM-sourced part numbers for the 2011 Toyota Camry covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.
- ECU / PCM Part Numbers
- 89661-06P30
- BCM / Body Module Part Numbers
- 89221-06090
- TCU / TCM Part Numbers
- 89530-33, 89530-06
- SRS / Airbag Module Part Numbers
- 89170-33491, 89170-06201, 89170-06380
- ABS / EBCM Part Numbers
- 44540-06110
- Instrument Cluster (IPC) Part Numbers
- 83800-06M40
- Transmission Control Module (TCM) Part Numbers
- 89530-33, 89530-06
Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.
Different trim or build?
Send your VIN and we'll confirm exact module support and pricing in the quote response.
Hit a security wall? We've got the keys.
1-year unlimited warranty on every flash and calibration.
Shared module fitment
Vehicles sharing modules with the 2011 Toyota Camry
These vehicles use one or more of the same replacement modules indexed for this vehicle.