Use vehicle lookup when you know the year, make, and model. Use quote when the car is in front of you and the symptom matters more than the catalog page.
Toyota Camry 6th Gen XV40 (2007-2011) ADAS Calibration & Module Programming
Covers model years 2007-2011 - one service guide for the whole generation.
Full ADAS calibration, module programming, and key security work for every Toyota Camry built on this platform. Same-day mobile service across the Dallas/Fort Worth metroplex; mail-in accepted nationwide.
PlatformXV40 (8th Gen, 2007-2011)
CAN ArchitectureHS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
SecurityToyota G-Chip (Texas Instruments 80-bit TI transponder, 1999-2009); encrypted rolling code; no OBD PIN extraction; AKL requires TIS dealer authorization + PIN code via techstream
The ADAS, module, and security rows below are consolidated across the full 2007-2011 generation. A year badge marks rows that apply only to part of the span; rows without a badge apply to every year. Year-specific differences are summarized under “What changes across 2007-2011”.
OVERVIEW
Expert ADAS calibration, module programming, and diagnostic recovery for the 2009 Toyota Camry. On this vehicle we cover documented systems include Rear View Camera, this XV40 (8th Gen, 2007-2011) platform vehicle, Toyota Smart Key / Transponder immobilizer support. Mobile across the DFW Metroplex, mail-in nationwide for module-bench work.
Platform
XV40 (8th Gen, 2007-2011)
Production
2007-present
Trim Levels
Trims: LE, SE, XLE, XSE, TRD. TSS standard all trims. XLE+ adds BSM and RCTW.
Merged ADAS coverage includes 3 system records, including Rear View Camera (2007), Rear View Camera (2008-2009), and Rear View Camera (2010-2011). Year-marked systems apply only to the shown range.
The merged generation page indexes 40 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, IPC coverage. Part numbers are confirmed for the exact year/VIN.
Core Auto Logic supports generation-level diagnostics, ADAS calibration, module programming, security-access planning, and mail-in bench work for the Toyota Camry 2007-2011 span, with exact-year validation before service.
VIN pos 4-8 identifies model/body/engine. Toyota WMI: 2T1 (Camry), 4T1 (Corolla/RAV4), 5TD (Highlander). Position 7 = engine. Position 10 = model year code.
Trims: LE, SE, XLE, XSE, TRD. TSS standard all trims. XLE+ adds BSM and RCTW.
VIN pos 4-8 identifies model/body/engine. Toyota WMI: 2T1 (Camry), 4T1 (Corolla/RAV4), 5TD (Highlander). Position 7 = engine. Position 10 = model year code.
Trims: LE, SE, XLE, XSE, TRD. TSS standard all trims. XLE+ adds BSM and RCTW.
VIN pos 4-8 identifies model/body/engine. Toyota WMI: 2T1 (Camry), 4T1 (Corolla/RAV4), 5TD (Highlander). Position 7 = engine. Position 10 = model year code.
Trims: LE, SE, XLE, XSE, TRD. TSS standard all trims. XLE+ adds BSM and RCTW.
3 ADAS systems documented across 2007-2011. Rows that apply to only part of the generation carry a year badge.
Filter by year
ADAS CALIBRATION MATRIX
ADAS systems on this vehicle
No ADAS suite - pre-TSS generation. Rear camera only where equipped.
40 documented Toyota Camry modules across 2007-2011. Open a group for part numbers, programming protocol, security notes, and clone support.
SRS MODULES
SRS Modules
Airbag Control Module (ACM)x2
Part 1Verify by VIN2007Bench
_years covers only 2007 for this generation
Used/donor module guide
Compatible donor years: 2007
Always match the full part number before buying a used module.
PROTOCOL
Bench
CLONE
true
NOTES
After any airbag deployment, the ACM stores crash data (hard codes). The module must be reset or replaced before the SRS system will function. Our equipment supports hard code clearing on most makes and models without dealer involvement.
Part 2Verify by VIN2008OBD
_years covers only 2008 for this generation
Used/donor module guide
Compatible donor years: 2008
Always match the full part number before buying a used module.
PROTOCOL
OBD
CLONE
true
NOTES
After any airbag deployment, the ACM stores crash data (hard codes). The module must be reset or replaced before the SRS system will function. Our equipment supports hard code clearing on most makes and models without dealer involvement.
Driver Airbag ModuleVerify by VIN2007-2008x1
_years covers only 2007-2008 for this generation
Used/donor module guide
Compatible donor years: 2007, 2008
Always match the full part number before buying a used module.
PROTOCOL
None
CLONE
false
NOTES
Steering wheel airbag must be replaced after deployment. Clock spring (spiral cable) must also be inspected and replaced if damaged. Confirm correct resistance before reconnecting.
Passenger Airbag ModuleVerify by VIN2007-2008x1
_years covers only 2007-2008 for this generation
Used/donor module guide
Compatible donor years: 2007, 2008
Always match the full part number before buying a used module.
PROTOCOL
None
CLONE
false
NOTES
Dashboard passenger airbag must be replaced after deployment. Dashboard assembly typically requires removal for access. Confirm OEM part number matches vehicle build date.
SRS Control Unitx5
89170-33490Verify by VIN2009-2010Under center console
_years covers only 2009-2010 for this generation
Used/donor module guide
Compatible donor years: 2009, 2010
Always match the full part number before buying a used module.
PART
89170-33490
LOCATION
Under center console
MFG
Denso
NOTES
Requires Techstream or J2534 for SRS reset. DTC B1650 common post-crash. Battery disconnect and 90-second wait before removal.
89170-33491Verify by VIN2009-2011Under center console
_years covers only 2009-2011 for this generation
Used/donor module guide
Compatible donor years: 2009, 2010, 2011
Always match the full part number before buying a used module.
PART
89170-33491
LOCATION
Under center console
MFG
Denso
NOTES
Requires Techstream or J2534 for SRS reset. DTC B1650 common post-crash. Battery disconnect and 90-second wait before removal.
89170-06200Verify by VIN2009-2010Under center console
_years covers only 2009-2010 for this generation
Used/donor module guide
Compatible donor years: 2009, 2010
Always match the full part number before buying a used module.
PART
89170-06200
LOCATION
Under center console
MFG
Denso
NOTES
Requires Techstream or J2534 for SRS reset. DTC B1650 common post-crash. Battery disconnect and 90-second wait before removal.
89170-06201Verify by VIN2009-2011Under center console
_years covers only 2009-2011 for this generation
Used/donor module guide
Compatible donor years: 2009, 2010, 2011
Always match the full part number before buying a used module.
PART
89170-06201
LOCATION
Under center console
MFG
Denso
NOTES
Requires Techstream or J2534 for SRS reset. DTC B1650 common post-crash. Battery disconnect and 90-second wait before removal.
89170-06380Verify by VIN2010-2011Under center console
_years covers only 2010-2011 for this generation
Used/donor module guide
Compatible donor years: 2010, 2011
Always match the full part number before buying a used module.
PART
89170-06380
LOCATION
Under center console
MFG
Denso
NOTES
Requires Techstream or J2534 for SRS reset. DTC B1650 common post-crash. Battery disconnect and 90-second wait before removal.
ECU MODULES
ECU Modules
Engine Control Module (ECM) - 2.4L 2AZ-FE I4x3
89661-06C40Verify by VIN2007J2534
_years covers only 2007 for this generation
Used/donor module guide
Compatible donor years: 2007
Always match the full part number before buying a used module.
PART
89661-06C40
PROTOCOL
J2534
CODING
Yes
CLONE
No
NOTES
2007-2009 Camry 2.4L 2AZ-FE uses 89661-06C40; superseded to 89661-06G14 per toyotapartsdeal.com catalog; confirmed OEM Camry ECM by multiple dealer parts listings. | Sources: https://www.ebay.com/itm/154352492882 | Alt PN: 89661-06G14
89661-06G41Verify by VIN2008J2534
_years covers only 2008 for this generation
Used/donor module guide
Compatible donor years: 2008
Always match the full part number before buying a used module.
PART
89661-06G41
PROTOCOL
J2534
CODING
Yes
CLONE
No
NOTES
2008-2009 Camry 2.4L 2AZ-FE confirmed as 89661-06G41 by multiple sources including OEM dealer listings; supersedes earlier 89661-06C41. | Sources: https://qcwo.com/technicaldomain/product/2008-2009-toyota-camry-2-4l-refurbished-ecm/ | Alt PN: 89661-06C41
89661-06G41Verify by VIN2009J2534
_years covers only 2009 for this generation
Used/donor module guide
Compatible donor years: 2009
Always match the full part number before buying a used module.
PART
89661-06G41
PROTOCOL
J2534
CODING
Yes
CLONE
No
NOTES
2008-2009 Camry 2.4L 2AZ-FE shares 89661-06G41; 89661-06J10 is later service supercession covering 2009-2010 per Toyota parts catalog. | Sources: https://qcwo.com/technicaldomain/product/2008-2009-toyota-camry-2-4l-refurbished-ecm/ | Alt PN: 89661-06J10
Engine Control Module (ECM) - 3.5L 2GR-FE V6x3
89661-06C20Verify by VIN2007J2534
_years covers only 2007 for this generation
Used/donor module guide
Compatible donor years: 2007
Always match the full part number before buying a used module.
PART
89661-06C20
PROTOCOL
J2534
CODING
Yes
CLONE
No
NOTES
2007 Camry 3.5L V6 2GR-FE confirmed as 89661-06C20/06C21 by multiple vendor listings; flashmasters.com shows OEM PN programming to VIN. | Sources: https://www.fs1inc.com/89661-06c20-2007-toyota-camry-3-5l-ecm-engine-computer-pcm-ecu-programmed-plug-play.html | Alt PN: 89661-06C21
89661-06C21Verify by VIN2008J2534
_years covers only 2008 for this generation
Used/donor module guide
Compatible donor years: 2008
Always match the full part number before buying a used module.
PART
89661-06C21
PROTOCOL
J2534
CODING
Yes
CLONE
No
NOTES
2008 Camry 3.5L V6 uses 89661-06C21; 89661-06G51 is a superseding service PN covering 2008-2009 per Toyota parts catalog. | Sources: https://www.fs1inc.com/89661-06c20-2008-toyota-camry-3-5l-ecm-engine-computer-pcm-ecu-programmed-plug-play.html | Alt PN: 89661-06G51
89661-06C21Verify by VIN2009J2534
_years covers only 2009 for this generation
Used/donor module guide
Compatible donor years: 2009
Always match the full part number before buying a used module.
PART
89661-06C21
PROTOCOL
J2534
CODING
Yes
CLONE
No
NOTES
2009 Camry 3.5L V6 confirmed as 89661-06C21/06G51 by fs1inc dealer-grade listing; 06G51 supersedes per Toyota parts catalog. | Sources: https://www.fs1inc.com/89661-06c21-2009-toyota-camry-3-5l-ecm-engine-computer-pcm-ecu-programmed-plug-play.html | Alt PN: 89661-06G51
Engine Control Module (ECM) - 2.4L 2AZ-FXE Hybridx3
89661-06K22Verify by VIN2007J2534
_years covers only 2007 for this generation
Used/donor module guide
Compatible donor years: 2007
Always match the full part number before buying a used module.
PART
89661-06K22
PROTOCOL
J2534
CODING
Yes
CLONE
No
NOTES
2007 Camry Hybrid ECM listed as 89661-06K22 at Toyota of Fort Worth dealer parts; 89661-06K series is Camry Hybrid-specific ECM family. | Sources: https://parts.toyotaoffortworth.com/p/Toyota_2007_Camry/Engine-Control-Module-ECM/49371178/8966106K22.html | Confidence: medium
89661-06G44Verify by VIN2008J2534
_years covers only 2008 for this generation
Used/donor module guide
Compatible donor years: 2008
Always match the full part number before buying a used module.
PART
89661-06G44
PROTOCOL
J2534
CODING
Yes
CLONE
No
NOTES
2007-2009 Camry Hybrid ECM 89661-06G44 listed at Toyota OEM Parts Online as genuine Toyota part; covers Camry Hybrid 2AZ-FXE engine. | Sources: https://toyota.oempartsonline.com/oem-parts/toyota-ecm-8966106g44 | Confidence: medium
89661-06G44Verify by VIN2009J2534
_years covers only 2009 for this generation
Used/donor module guide
Compatible donor years: 2009
Always match the full part number before buying a used module.
PART
89661-06G44
PROTOCOL
J2534
CODING
Yes
CLONE
No
NOTES
2007-2009 Camry Hybrid ECM 89661-06G44 covers all three hybrid XV40 model years per Toyota OEM Parts Online genuine part listing. | Sources: https://toyota.oempartsonline.com/oem-parts/toyota-ecm-8966106g44 | Confidence: medium
Hybrid Vehicle Control ECU - 2007 Camry HybridVerify by VIN2007x1
_years covers only 2007 for this generation
Used/donor module guide
Compatible donor years: 2007
Always match the full part number before buying a used module.
PART
89981-33013
PROTOCOL
J2534
CODING
Yes
CLONE
No
NOTES
2007-2008 Camry Hybrid HV ECU listed as 89981-33013 family; 89981-33030 and 89981-33050 cover 2008-2010; hybrid battery management control module. | Sources: https://seabreezeautoparts.com/products/08-09-toyota-camry-hybrid-89981-33050-computer-engine-control-ecu-ecm-module.html | Confidence: medium
Hybrid Vehicle Control ECU - 2008 Camry HybridVerify by VIN2008x1
_years covers only 2008 for this generation
Used/donor module guide
Compatible donor years: 2008
Always match the full part number before buying a used module.
PART
89981-33030
PROTOCOL
J2534
CODING
Yes
CLONE
No
NOTES
2008 Camry Hybrid HV ECU is 89981-33030 per Toyota OEM Parts Online; 89981-33050 supersedes and covers 2008-2010 per eBay and Seabreeze OEM pull listings. | Sources: https://toyota.oempartsonline.com/oem-parts/toyota-engine-control-module-ecm-8998133030 | Alt PN: 89981-33050 | Confidence: medium
Hybrid Vehicle Control ECU - 2009 Camry HybridVerify by VIN2009x1
_years covers only 2009 for this generation
Used/donor module guide
Compatible donor years: 2009
Always match the full part number before buying a used module.
PART
89981-33050
PROTOCOL
J2534
CODING
Yes
CLONE
No
NOTES
2009 Camry Hybrid HV ECU confirmed as 89981-33050 (eBay OEM listing labeled 07-08-09); 89981-33070 covers 2009-2011 per americantoyota.com dealer parts. | Sources: https://www.ebay.com/p/669801561 | Alt PN: 89981-33070 | Confidence: medium
ECM - 2.5L 2AR-FE / 3.5L 2GR-FEVerify by VIN2010-2011x1
_years covers only 2010-2011 for this generation
Used/donor module guide
Compatible donor years: 2010, 2011
Always match the full part number before buying a used module.
NOTES
Toyota Camry ECM. Techstream VIN learning + immobilizer registration.
BCM MODULES
BCM Modules
Body ECU (Smart Entry / Body Integration)Verify by VIN
coding and programming fields are absent or ambiguous
Always match the full part number before buying a used module.
NOTES
Replace if ABS DTC C0210/C0215 set.
OTHER MODULES (IPC, SAS)
Other Modules (IPC, SAS)
Instrument Panel Cluster (IPC)Verify by VIN201083800-06L20
_years covers only 2010 for this generation
Used/donor module guide
Compatible donor years: 2010
Donor must match part family 83800-06L20 - requires cloning
Always match the full part number before buying a used module.
PART
83800-06L20
CLONE
Yes
NOTES
IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Instrument Panel Cluster (IPC)Verify by VIN201183800-06M40
_years covers only 2011 for this generation
Used/donor module guide
Compatible donor years: 2011
Donor must match part family 83800-06M40 - requires cloning
Always match the full part number before buying a used module.
PART
83800-06M40
CLONE
Yes
NOTES
IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Steering Angle Sensor (SAS)Verify by VIN
coding and programming fields are absent or ambiguous
Always match the full part number before buying a used module.
NOTES
Subscription-based. Final XV70 gen - subscription transfer on vehicle sale.
3 gateway, immobilizer, and security items documented across 2007-2011.
KEY SECURITY & IMMOBILIZER
Key Security & Immobilizer
SystemToyota Smart Key / Transponder
Add KeyYes
All Keys LostYes
Toyota G-Chip (Texas Instruments 80-bit TI transponder, 1999-2009); encrypted rolling code; no OBD PIN extraction; AKL requires TIS dealer authorization + PIN code via techstream
Toyota AM/FM stereo; CD player; Bluetooth (select trims); Aux input
OTA Capable
No
ECU Unlock Supported
No
Custom Programming
Yes
WHAT WE RESOLVE
6th Gen XV40 (2007-2011) common module and ADAS issues
ADAS calibration driftWatch for calibration needs after windshield, bumper, suspension, camera, or radar work. Documented systems include Rear View Camera (2007), Rear View Camera (2008-2009), and Rear View Camera (2010-2011). Year-marked systems apply only to the shown range.
SRS crash-data and warning lightSRS service can involve Airbag Control Module (ACM) (2007), Driver Airbag Module (2007-2008), and Passenger Airbag Module (2007-2008). Part numbers and crash-data workflow are confirmed for the exact year/VIN.
Replacement module setupECU/PCM replacement programming, BCM configuration, TCU/TCM cloning, ABS/EBCM setup are represented in the merged generation data. Rows with year ranges do not apply to every model year; verify by VIN.
Gateway, key, and immobilizer accessGateway, key, and immobilizer procedures are represented by 3 merged security records. Access and all-keys-lost support varies by year - verify by VIN.
Shared module fitment
Vehicles sharing these modules
These vehicles use one or more indexed replacement modules from this generation.
Yes. Core Auto Logic supports generation-scoped module programming for the Toyota Camry (2007-2011). The merged generation data includes ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS coverage. Rows marked with a year range apply only to that part of the span; unmarked rows are present across the merged generation data.
Which modules are documented for Toyota Camry (2007-2011)?
The Toyota Camry (2007-2011) generation currently shows 34 core module records across ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS groups. SRS examples include Airbag Control Module (ACM) (2007), Driver Airbag Module (2007-2008), and Passenger Airbag Module (2007-2008). Part numbers and module variants must be confirmed for your exact year/VIN. Reference part number: 89170-33490 (2009-2010) - confirm for your exact year/VIN.
Does Toyota Camry (2007-2011) need ADAS calibration after glass or collision work?
The merged generation data documents 3 ADAS systems, including Rear View Camera (2007), Rear View Camera (2008-2009), and Rear View Camera (2010-2011). Calibration triggers include ECM Replacement and Skid Control ECU Replacement. Procedure type is VIN-specific scan-tool procedure; verify exact requirements by VIN before setup.
Can you reset the airbag module on Toyota Camry (2007-2011)?
Yes. The generation data includes 9 SRS records, including Airbag Control Module (ACM) (2007), Driver Airbag Module (2007-2008), and Passenger Airbag Module (2007-2008). Bench reset, cloning, and replacement setup are handled after part-number review. Any SRS part number shown for this generation is planning data only - confirm for your exact year/VIN. Reference part number: 89170-33490 (2009-2010) - confirm for your exact year/VIN.
Do all Toyota Camry (2007-2011) years use the same parts?
No assumption should be made across the full span. The generation page merges rows across 2007-2011; any row that does not span all data-bearing years is printed with its year range or treated as varies by year - verify by VIN. Part numbers always require exact year/VIN confirmation before ordering, cloning, or programming.
Can you program keys or immobilizer systems for Toyota Camry (2007-2011)?
Yes, where the VIN and security workflow support it. The generation data includes 3 gateway, immobilizer, or key-security records. Key records are present in the merged generation data. Security access, all-keys-lost eligibility, and add-key workflows vary by year - verify by VIN.
How long does service take for Toyota Camry (2007-2011)?
Most programming, cloning, SRS, and calibration jobs are quoted after VIN, DTC, part number, and repair-scope review. Labor time varies by year - verify by VIN before scheduling. Mail-in module work typically depends on module condition, donor data, and shipping window.
Is Toyota Camry (2007-2011) service mobile or mail-in?
Both paths are available depending on the job. Mobile service covers DFW on-vehicle diagnostics, ADAS setup, key programming, and post-repair coding. Mail-in service covers ECU, BCM, SRS, TCU, ABS, and other bench module work nationwide. We confirm the correct path for your exact year/VIN before scheduling.
The Core Auto Logic logo features a stylized circular design combining a mechanical gear with a globe made of interconnected green circuit lines. The circuit pattern represents advanced automotive electronics, diagnostics, and networked vehicle systems. The word "CORE" appears prominently within the circular design, with "AUTO LOGIC" displayed to the right in bold lettering. The overall design reflects expertise in ADAS calibration, ECU programming, and modern vehicle technology services.A compact version of the Core Auto Logic logo featuring a circular gear shape combined with a globe made of interconnected circuit lines, representing automotive electronics and advanced vehicle technology.A compact version of the Core Auto Logic logo featuring a circular gear shape combined with a globe made of interconnected circuit lines, representing automotive electronics and advanced vehicle technology.The CORE Auto Logic logo features a stylized gear partially encircling a globe made of green interconnected circuit lines, representing automotive technology and electronic systems. The word "CORE" appears prominently in bold lettering, followed by "AUTO LOGIC" to the right, conveying a focus on advanced vehicle diagnostics, ADAS calibration, and module programming services.The Core Auto Logic logo features a stylized circular design combining a mechanical gear with a globe made of interconnected green circuit lines. The circuit pattern represents advanced automotive electronics, diagnostics, and networked vehicle systems. The word "CORE" appears prominently within the circular design, with "AUTO LOGIC" displayed to the right in bold lettering. The overall design reflects expertise in ADAS calibration, ECU programming, and modern vehicle technology services.