VIN / Build Split
VIN pos 4-8 identifies model/body/engine. Toyota WMI: 2T1 (Camry), 4T1 (Corolla/RAV4), 5TD (Highlander). Position 7 = engine. Position 10 = model year code.
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
DFW Mobile Service
DFW Serving Dallas / Fort Worth
2014 Toyota 4RUNNER Supported Services
2014 Toyota 4RUNNER
ADAS calibration, module programming, and security relearns
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Technical snapshot
- Platform N280 (5th Gen, 2010+)
- CAN Architecture HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
- Security Toyota H-Chip (Texas Instruments DST-AES 128-bit transponder, 2010+); rolling code immobilizer; no OBD PIN extraction; AKL requires TIS dealer authorization + PIN code + registration via techstream
What do you need fixed?
Choose a service to start your quote.
OVERVIEW
Expert ADAS calibration, module programming, and diagnostic recovery for the 2014 Toyota 4runner. On this vehicle we cover documented systems include Rear View Camera, this N280 (5th Gen, 2010+) platform vehicle, Toyota Smart Key / Transponder immobilizer support. Mobile across the DFW Metroplex; mail-in module service is available nationwide.
Platform
N280 (5th Gen, 2010+)
Production
2003-present
Trim Levels
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Drivetrain
RWD / 4WD
Engine
-
CAN Speed
HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
YEAR-SPECIFIC NOTES
Exact-year service summary for 2014 Toyota 4runner
ADAS coverage
This 2014 Toyota 4runner page documents 1 ADAS system, including Rear View Camera.
View ADAS dataCalibration triggers
Documented calibration triggers include ECM Replacement and Skid Control ECU Replacement. Use the ADAS tab for the full trigger list.
View triggersProgrammable modules
This page indexes 19 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and IPC coverage.
View modulesGateway and security
This page includes 3 gateway, immobilizer, or key-security records for this 2014 Toyota 4runner.
View securityCore Auto Logic capability
Core Auto Logic supports exact-year diagnostics, ADAS calibration, module programming, and security-access planning for the 2014 Toyota 4runner using the documented systems and module data on this page.
Choose a sectionWhat changes on this exact year
Feature availability
Platform: N280 (5th Gen, 2010+) - Confirmed
Driver-assist suite
No ADAS suite - pre-TSS generation. Rear camera only where equipped.
VIN and build split
VIN pos 4-8 identifies model/body/engine. Toyota WMI: 2T1 (Camry), 4T1 (Corolla/RAV4), 5TD (Highlander). Position 7 = engine. Position 10 = model year code.
Infotainment context
Toyota Entune (6.1" or 7" touchscreen); Bluetooth; USB/Aux; navigation available on higher trims
Network and access
CAN: HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
Tool access for this exact year
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
Factory scan, coding, and calibration access
Toyota Techstream / Toyota GTS+
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
ADAS scan, setup, and verification
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Bench cloning and chip-level recovery
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Choose a section to view data
SUPPORTED SYSTEMS
What we service on this vehicle
Documented module coverage for the 2014 Toyota 4RUNNER. Counts reflect modules our techs have programmed or calibrated on this exact platform.
ADAS Calibration
1 module documented
Forward camera, radar, surround-view and lane-keep recalibration after windshield, suspension or fascia work.
Open ADAS tabEngine / ECU Programming
1 module documented
Powertrain reprogramming, calibration updates, replacement ECU configuration and security access.
Open Modules tabBCM / Body Programming
1 module documented
Body control module, gateway and accessory programming. Includes feature-bit reconfiguration.
Open Modules tabTCU / Transmission
1 module documented
Transmission control module reprogramming, adaptive learning reset and replacement TCM clone.
Open Modules tabSRS / Airbag Reset
6 modules documented
Crash-data clear, hard-code reset and replacement airbag module configuration.
Open Modules tabABS / Brake Module
3 modules documented
ABS / EBCM bleed support, replacement module coding and yaw-rate sensor calibration.
Open Modules tabIPC, SAS & Other Modules
3 modules documented
Instrument cluster cloning, steering angle sensor calibration and other supporting modules.
Open Modules tabConnectivity & Accessories
4 modules documented
Infotainment radio, surround view, remote start, trailer brake controller and other equipped systems.
Open Modules tabRecalibration Triggers
2 modules documented
Service events that require ADAS recalibration on this vehicle. Tap to see what triggers what.
Open ADAS tabNeed something not listed? Most undocumented modules can still be programmed.
Get a QuoteFeature availability 1
Platform: N280 (5th Gen, 2010+)
ConfirmedVerify platform code matches when cross-referencing part numbers across model years.
WHAT WE RESOLVE
Common issues on this vehicle
Common Toyota 4runner issues we resolve on this platform: Rear View Camera recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - N280 (5th Gen, 2010+) platform uses HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14.
ADAS CALIBRATION MATRIX
ADAS systems on this vehicle
No ADAS suite - pre-TSS generation. Rear camera only where equipped.
Scroll for part numbers and Details
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Rear View Camera | Rear Camera | Camera | None | YES | - |
ADAS SYSTEM
YES Supported
Identification
- System type
- Module category
- Sensor location
Part Numbers
- OEM
- Alternative
Calibration & Triggers
- Calibration type
- Programming approach
- Requires PMI
- Trigger events
Technical Notes
- Chip / MCU
- Service notes
Need this calibrated?
Get a quote for ADAS calibration WHEN IS CALIBRATION REQUIRED?
Triggers for ADAS recalibration
ECM Replacement
Techstream VIN learning + IMMO registration.
Skid Control ECU Replacement
Techstream zero-point calibration (yaw sensor + steering angle).
SRS Modules
SRS Control Unit 89170-35310
- Part number
- 89170-35310
- Location
- Under center console
- Manufacturer
- Denso
- Notes
- Requires Techstream or J2534 for SRS reset. DTC B1650 common post-crash. Battery disconnect and 90-second wait before removal.
SRS Control Unit 89170-35450
- Part number
- 89170-35450
- Location
- Under center console
- Manufacturer
- Denso
- Notes
- Requires Techstream or J2534 for SRS reset. DTC B1650 common post-crash. Battery disconnect and 90-second wait before removal.
SRS Control Unit 89170-35310
- Part number
- 89170-35310
- Location
- Under center console
- Manufacturer
- Denso
- Notes
- Requires Techstream or J2534 for SRS reset. DTC B1650 common post-crash. Battery disconnect and 90-second wait before removal.
SRS Control Unit 89170-35450
- Part number
- 89170-35450
- Location
- Under center console
- Manufacturer
- Denso
- Notes
- Requires Techstream or J2534 for SRS reset. DTC B1650 common post-crash. Battery disconnect and 90-second wait before removal.
SRS Control Unit 89170-35310
- Part number
- 89170-35310
- Location
- Under center console
- Manufacturer
- Denso
- Notes
- Requires Techstream or J2534 for SRS reset. DTC B1650 common post-crash. Battery disconnect and 90-second wait before removal.
SRS Control Unit 89170-35450
- Part number
- 89170-35450
- Location
- Under center console
- Manufacturer
- Denso
- Notes
- Requires Techstream or J2534 for SRS reset. DTC B1650 common post-crash. Battery disconnect and 90-second wait before removal.
ECU Modules
ECM - 4.0L 1GR-FE V6
- Notes
- Toyota 4Runner ECM. Techstream programming, VIN registration, and immobilizer synchronization as equipped. Verify calibration by VIN in Toyota TIS.
BCM Modules
Body ECU (Smart Entry / Body Integration)
- Notes
- Toyota Body ECU. Techstream registration for smart keys and door functions.
TCU / TCM Transmission Modules
TCU - A750F 5-Speed Auto 89530-35
- Part number
- 89530-35
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Renesas SH7058
- Notes
- Requires Toyota Techstream for initialization. ATF WS fluid spec. Shift relearn via drive cycle.
ABS / Brake Modules
Skid Control ECU (ABS/VSC/TRAC)
- Notes
- Toyota Skid Control ECU. Techstream zero-point calibration for yaw sensor after replacement.
Wheel Speed Sensor - Front (each)
- Notes
- Replace if ABS DTC C0200/C0205 set.
Wheel Speed Sensor - Rear (each)
- Notes
- Replace if ABS DTC C0210/C0215 set.
Other Modules (IPC, SAS)
Instrument Panel Cluster (IPC) 83800-35F20
- Part number
- 83800-35F20
- Cloning supported
- Yes
- Notes
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Steering Angle Sensor (SAS)
- Coding required
- Yes
- Notes
- INTEGRATED (clock spring / steering column module
Steering Angle Sensor (SAS)
- Coding required
- Yes
- Notes
- cross-year extension)
Connectivity & Accessories
Toyota Audio Multimedia (new large display) (VERIFY VIA TIS - N280)
- Part number
- (VERIFY VIA TIS - N280)
- Notes
- New larger display across N280 trims. Wireless CarPlay + Android Auto. OTA capable. Techstream integration check post-replacement.
Multi-Terrain Monitor (TRD / Limited - standard) (VERIFY VIA TIS - N280 MTM SET)
- Part number
- (VERIFY VIA TIS - N280 MTM SET)
- Notes
- Standard on TRD Off-Road, TRD Pro, Limited. Individual camera Techstream re-registration if replaced. Verify all MTM angles post-replacement.
Wireless Charger (select trims) (VERIFY VIA TIS - N280)
- Part number
- (VERIFY VIA TIS - N280)
- Notes
- Qi wireless charging on equipped trims. Verify function with compatible device after replacement.
360-Degree Surround View (select trims) (VERIFY VIA TIS - N280 SVM SET)
- Part number
- (VERIFY VIA TIS - N280 SVM SET)
- Notes
- Techstream camera system check. All cameras must initialize before full SVM function restores.
ARCHITECTURE & CONNECTIVITY
Architecture & Connectivity
- Body Construction
- Body-on-frame; high-strength steel ladder frame; solid rear axle / IFS
- OBD Protocol
- ISO 15765-4 CAN (500 kbps)
- CAN Architecture
- HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
- Infotainment
- Toyota Entune (6.1" or 7" touchscreen); Bluetooth; USB/Aux; navigation available on higher trims
- OTA Capable
- No
- ECU/TCM Unlocking
- Contact us
- ECU/TCM Flashing
- Confirmed
Reviewed coverage: 2014 - 4.7L (2UZFE), 4.7L 4x4 (2UZFE).
Confirm the exact engine, ECU, and any prerequisite access method before service.
FREQUENTLY ASKED QUESTIONS
FAQ
How much does ADAS calibration cost for a 2014 Toyota 4runner?
ADAS calibration pricing for a 2014 Toyota 4runner depends on which of its 1 documented systems need work after a repair. This vehicle is documented with Rear View Camera. We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.
Can you reset the airbag light on a 2014 Toyota 4runner?
Yes. The 2014 Toyota 4runner uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: 89170-35310. Mobile diagnosis and programming are available in DFW, and mail-in module service is available nationwide. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.
What is needed after replacing the windshield on a 2014 Toyota 4runner?
After windshield replacement on a 2014 Toyota 4runner, Rear View Camera rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in module service is available nationwide for eligible module work.
How long does a 2014 Toyota 4runner module service take?
Most 2014 Toyota 4runner onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 14 programmable modules documented in our database (1 ECU, 1 BCM, 1 TCU, 3 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module service is available nationwide.
Do you cover the 2014 Toyota 4runner on-site, or is this mail-in only?
We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, post-repair recoding, and supported module work). Mail-in module service is available nationwide. Quote the work and we will confirm the active service path for the 2014 Toyota 4runner. Do not ship a module unless support confirms next steps.
What kind of warranty do you offer on 2014 Toyota 4runner programming?
Every programming, cloning, and calibration job on the 2014 Toyota 4runner is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
Which modules on a 2014 Toyota 4runner can you actually service?
We program, clone, repair, or replace the full programmable-module stack on a 2014 Toyota 4runner. For this vehicle our database documents:
- 1 engine control (ECU/PCM)
- 1 transmission control (TCU/TCM)
- 1 body control (BCM and related)
- 3 ABS / brake control (EBCM)
- 1 immobilizer / security
- 2 key & fob
- 1 instrument cluster (IPC)
- 2 steering angle sensor (SAS)
- 1 ADAS module
Send the VIN and the operations performed and we will confirm support and pricing.
Additional Module Part Numbers
Additional OEM-sourced part numbers for the 2014 Toyota 4RUNNER covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.
- ECU / PCM Part Numbers
- 89661-35E80
- BCM / Body Module Part Numbers
- 89221-35110
- TCU / TCM Part Numbers
- 89530-35
- SRS / Airbag Module Part Numbers
- 89170-35310, 89170-35450
- ABS / EBCM Part Numbers
- 44540-35170
- Instrument Cluster (IPC) Part Numbers
- 83800-35F20
- Transmission Control Module (TCM) Part Numbers
- 89530-35
Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.
Different trim or build?
Send your VIN and we'll confirm exact module support and pricing in the quote response.
Hit a security wall? We've got the keys.
1-year unlimited warranty on every flash and calibration.
Shared module fitment
Vehicles sharing modules with the 2014 Toyota 4runner
These vehicles use one or more of the same replacement modules indexed for this vehicle.
Finish the repair
Need help finishing this repair?
Get onsite help in Dallas-Fort Worth. Ask about same-day availability or a one-time remote session for eligible non-VSP work.
Techstream / GTS+ Explore one-time factory coding and programming. We confirm the software and procedure for your vehicle. Module programming & recovery Replacing a module or dealing with a failed programming attempt? Send the part numbers and fault scan for review. Onsite tools & equipment Bring in a technician or ask about hourly, daily and weekly rentals where licensing and equipment availability allow.